286-6495 LINES GP-BOOM CYLINDER -BOOM LOWERING CONTROL S/N KGF1-UP; FAL1-UP PART OF 270-5974 VALVE AR-CHECK & RELIEF AN ATTACHMENT 320D

HYDRAULIC SYSTEM

LINES GP-CYLINDER

0. 286-6495 LINES GP-B

LINES GP-BUCKET

1. 127-6624 LINES GP-B
2. 127-6797 LINES GP-B
3. 187-5693 LINES GP-B
4. 187-5975 LINES GP-B
5. 187-5976 LINES GP-B
6. 225-4592 LINES GP-B
7. 242-6757 LINES GP-B
8. 242-6771 LINES GP-B
9. 248-9926 LINES GP-B
0. INFORMATION

EXCAVATOR 320D EXCAVATOR FAL
320D & 320D L Excavators FAL00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4874 320D FAL (2006)

HYDRAULIC SYSTEM

LINES GP-CYLINDER

266-8022 LINES GP-BOOM CYLINDER

266-8023 LINES GP-BOOM CYLINDER

286-6495 LINES GP-BOOM CYLINDER

127-6624 LINES GP-BUCKET CYLINDER

127-6797 LINES GP-BUCKET CYLINDER

187-5693 LINES GP-BUCKET CYLINDER

#SEBP48741090

286-6495: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

286-6495 LINES GP-BOOM CYLINDER -BOOM LOWERING CONTROL
S/N KGF1-UP; FAL1-UP
PART OF 270-5974 VALVE AR-CHECK & RELIEF
AN ATTACHMENT

i02578379 SEBP4874

2866495 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-1674	[4]	CLIP
2.	7K-1181	[12]	STRAP-CABLE
3.	119-2804	[2]	SUPPORT AS
4.	149-1738	[4]	CLIP
5.	225-4785 Y	[2]	VALVE GP-LOAD CONTROL (BOOM CYLINDER)
6.	266-1110	[1]	TUBE AS
7.	266-1111	[1]	TUBE AS
8.	499-0234	[1]	PIPE AS
9.	499-0230	[1]	PIPE AS
10.	499-0229	[2]	SUPPORT AS
11.	266-1147 I	[1]	HOSE AS
12.	320-0013 I	[2]	HOSE AS
13.	278-6587	[1]	BLOCK
14.	278-6593 I	[2]	HOSE AS
15.	278-6875	[1]	SUPPORT AS
16.	278-6877	[1]	SUPPORT AS
17.	286-6731 I	[2]	HOSE AS
18.	286-6720	[1]	TUBE AS
19.	286-6721	[1]	TUBE AS
20.	148-8326	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-7354	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-9872	[1]	CONNECTOR
21.	148-8336	[4]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
22.	148-8341	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8713	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
23.	148-8371	[1]	ELBOW AS
	6V-8397	[1]	SEAL-O-RING
	8C-8988	[1]	ELBOW
24.	148-8378	[2]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
25.	148-8390	[1]	ELBOW AS
	2M-9780	[1]	SEAL-O-RING
	6V-8626	[1]	ELBOW
	7J-9108	[1]	SEAL-O-RING
26.	148-8407	[2]	PLUG AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	9S-4191	[1]	PLUG (9/16-18-THD)
27.	148-8411	[2]	PLUG AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	9S-4185	[1]	PLUG (3/4-16-THD)
28.	148-8435	[2]	TEE AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
	6V-8781	[1]	TEE
29.	164-5578	[1]	TEE AS
	3D-2824	[1]	SEAL-O-RING
	6V-9175	[1]	TEE (FACE SEAL)
	6V-9746	[1]	SEAL-O-RING
	7J-9108	[1]	SEAL-O-RING
30.	1P-3703	[6]	SEAL-RECTANGULAR
31.	4I-9521	[2]	BAND-MARKER (RED, L1)
32.	4I-9522	[2]	BAND-MARKER (YELLOW, L2)
33.	4I-9525	[2]	BAND-MARKER (ORANGE, R1)
34.	4I-9526	[2]	BAND-MARKER (WHITE, R2)
35.	6V-9746	[4]	SEAL-O-RING
36.	7J-9108	[2]	SEAL-O-RING
37.	280-2747 M	[8]	BOLT-SOCKET HEAD (M10X1.5X60-MM)
38.	8T-4121	[18]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
40.	8T-4185 M	[8]	BOLT (M10X1.5X50-MM)
41.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
42.	8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
43.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
44.	8T-4956 M	[10]	BOLT (M12X1.75X35-MM)
45.	8T-6466 M	[8]	BOLT (M10X1.5X60-MM)
46.	307-5121	[1]	GUARD
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP48741091

127-6624: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

127-6624 LINES GP-BUCKET CYLINDER
S/N KGF1-UP
PART OF 302-9208, 419-0528 LINKAGE AR-FRONT
FOR USE WITH 6.28-M (20.6-FT) STICK
AN ATTACHMENT

i01342032 SEBP4874

1276624 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-7233	[2]	TUBE AS
2.	4I-5556 I	[2]	HOSE AS
3.	7Y-7904 I	[2]	HOSE AS
4.	7Y-4868	[16]	CLIP
5.	6V-9746	[8]	SEAL-O-RING
6.	8T-4139 M	[16]	BOLT (M12X1.75X30-MM)
7.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP48741092

127-6797: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

127-6797 LINES GP-BUCKET CYLINDER -SUPER LONG REACH
S/N KGF1-UP
PART OF 253-6664, 344-4386 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT

i01341980 SEBP4874

1276797 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	116-9129	[1]	TUBE AS
2.	4J-5267	[2]	SEAL-O-RING
3.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
4.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
5.	8T-4195 M	[8]	BOLT (M10X1.5X30-MM)
6.	7Y-6442	[1]	TUBE AS
7.	7Y-6511	[1]	SUPPORT AS
8.	7Y-4868	[2]	CLIP
9.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
10.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
11.	7Y-6510	[1]	SUPPORT AS
	M		METRIC PART

#SEBP48741093

187-5693: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

187-5693 LINES GP-BUCKET CYLINDER
S/N KGF1-UP; FAL1-UP
PART OF 240-3839, 240-3849, 240-3851, 275-3702, 275-3835, 290-1785, 290-1792, 314-3727, 314-3729, 416-1002 STICK AR-HOE
FOR USE WITH 2.9-M (9.5-FT) STICK
AN ATTACHMENT

i01339060 SEBP4874

1875693 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-8785 I	[2]	HOSE AS
2.	5I-4174	[1]	BLOCK
3.	8T-9403	[4]	FLANGE-HALF
4.	8T-4198 M	[4]	BOLT (M10X1.5X100-MM)
5.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
6.	1P-3702	[2]	SEAL-RECTANGULAR
7.	1P-3703	[1]	SEAL-RECTANGULAR
8.	8T-4182 M	[4]	BOLT (M10X1.5X45-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP48741094

187-5975: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

187-5975 LINES GP-BUCKET CYLINDER
S/N KGF1-UP; FAL1-UP
PART OF 240-3843 STICK AR-HOE
AN ATTACHMENT

i02426128 SEBP4874

1875975 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-4174	[1]	BLOCK
2.	5I-8715 I	[2]	HOSE AS
3.	8T-4198 M	[4]	BOLT (M10X1.5X100-MM)
4.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
5.	1P-3703	[1]	SEAL-RECTANGULAR
6.	8T-9403	[4]	FLANGE-HALF
7.	1P-3702	[2]	SEAL-RECTANGULAR
8.	8T-4182 M	[4]	BOLT (M10X1.5X45-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP48741095

187-5976: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

187-5976 LINES GP-BUCKET CYLINDER
S/N KGF1-UP; FAL1-UP
PART OF 240-3845 STICK AR, 298-4127 STICK AR-HOE
FOR USE WITH 3.9-M (12.8-FT) STICK
AN ATTACHMENT

i01339134 SEBP4874

1875976 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-1279 I	[2]	HOSE AS
2.	6V-9746	[4]	SEAL-O-RING
3.	187-6696 I	[2]	HOSE AS
4.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	8T-4179 M	[8]	BOLT (M12X1.75X20-MM)
6.	102-1291	[1]	ELBOW AS
7.	102-1120	[1]	ELBOW AS
8.	8T-4198 M	[4]	BOLT (M10X1.5X100-MM)
9.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
10.	5I-4174	[1]	BLOCK
11.	8T-9403	[4]	FLANGE-HALF
12.	1P-3702	[2]	SEAL-RECTANGULAR
13.	1P-3703	[1]	SEAL-RECTANGULAR
14.	8T-4182 M	[4]	BOLT (M10X1.5X45-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP48741096

225-4592: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

225-4592 LINES GP-BUCKET CYLINDER
S/N KGF1-UP; FAL1-UP
PART OF 225-4590, 225-4598, 341-2181, 349-4151 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT

i02348511 SEBP4874

2254592 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
2.	8T-4910 M	[1]	BOLT (M12X1.75X60-MM)
3.	096-4480	[1]	CLAMP
4.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
6.	234-4592	[1]	SUPPORT
7.	234-4591	[1]	SUPPORT AS
8.	095-1597	[1]	SEAL-O-RING
9.	9X-6032 M	[4]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
10.	259-0647	[1]	TUBE AS
	M		METRIC PART

#SEBP48741097

242-6757: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

242-6757 LINES GP-BUCKET CYLINDER
S/N KGF1-UP; FAL1-UP
PART OF 242-6755, 242-6758, 341-2813, 349-4133 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT

i02402140 SEBP4874

2426757 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6032 M	[4]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
2.	095-1597	[1]	SEAL-O-RING
3.	274-2547	[1]	TUBE AS
4.	096-4412	[1]	SUPPORT
5.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
6.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7.	124-1034	[1]	SUPPORT AS
8.	096-4480	[1]	CLAMP
9.	8T-4910 M	[1]	BOLT (M12X1.75X60-MM)
10.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART

#SEBP48741098

242-6771: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

242-6771 LINES GP-BUCKET CYLINDER
S/N KGF1-UP; FAL1-UP
PART OF 341-2817 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT

i04554141 SEBP4874

2426771 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6032 M	[4]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
2.	095-1597	[1]	SEAL-O-RING
3.	472-0688	[1]	TUBE AS
4.	096-4449	[1]	SUPPORT
5.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
6.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7.	124-1021	[1]	SUPPORT AS
8.	096-4480	[1]	CLAMP
9.	8T-4910 M	[1]	BOLT (M12X1.75X60-MM)
10.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART

#SEBP48741099

248-9926: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

248-9926 LINES GP-BUCKET CYLINDER
S/N KGF1-UP; FAL1-UP
PART OF 289-7946, 364-0938 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT

i02946705 SEBP4874

2489926 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-2321	[1]	SUPPORT AS
2.	119-2323	[1]	SUPPORT AS
3.	255-1592	[1]	TUBE AS
4.	1P-3703	[1]	SEAL-RECTANGULAR
5.	7Y-4868	[2]	CLIP
6.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
8.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
9.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
10.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART