AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

280-1942 TRIM GP-CAB -FRONT S/N W8P485-UP PART OF 253-6925, 253-6926, 253-6927, 253-6928, 253-6930, 344-5427, 344-5434 CAB GP M318D


OPERATOR STATION
CAB GP
WINDOW GP

WHEELED EXCAVATOR M318D WHEELED EXCAVATOR W8P
 M318D Excavator W8P00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4888 M318D W8P   (2007)

OPERATOR STATION

CAB GP
TRIM GP-CAB
280-1942 TRIM GP-CAB
TRIM GP-CAB
280-1942 TRIM GP-CAB
TRIM GP-CAB
280-1942 TRIM GP-CAB
TRIM GP-CAB
280-1943 TRIM GP-CAB
TRIM GP-CAB
344-5428 TRIM GP-CAB
TRIM GP-CAB
344-5428 TRIM GP-CAB
 

#SEBP48881200
 

280-1942: TRIM GP-CAB

280-1942 TRIM GP-CAB -FRONT
S/N W8P485-UP
PART OF 253-6925, 253-6926, 253-6927, 253-6928, 253-6930, 344-5427, 344-5434 CAB GP
i03295645 SEBP4888
2801942 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your M318D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-6352 [1] LOUVER AS  
2. 164-8474 [2] LOUVER AS-VENT  
3. 171-7325 M [2] SCREW-TAPPING (M5X0.8-THD)  
4. 282-7758 [1] COVER AS  
  259-7353 [4] CLIP  
5. 234-6470 [1] COVER-MONITOR  
6. 234-6471 [1] COVER-DUCT  
7. 234-6472 [1] COVER  
8. 234-6473 [1] COVER-FRONT (UPPER, RH)  
9. 234-6474 [1] COVER-CONSOLE (UPPER, RH)  
10. 306-3970 C [1] COVER  
11. 234-6476 [1] DUCT  
12. 305-0333 C [1] BRACKET  
13. 234-6480 [1] BRACKET AS  
14. 234-6483 [1] BRACKET AS  
15. 234-6485 [1] BRACKET AS  
16. 234-6490 [1] CUP  
17. 234-6497 [1] COVER  
18. 234-6498 [5] RIVET  
19. 302-0455 [1] COVER GP-CONSOLE  
20. 234-6579 [2] NUT-SPEED  
21. 235-8923 [1] CAP  
22. 253-6914 [1] CASE  
23. 253-6915 [1] INSERT  
24. 253-6919 [1] COVER  
25. 257-2251 [1] PANEL-SWITCH  
26. 259-7202 [1] ASHTRAY  
27. 128-2135 M [10] SCREW-TRUSS HEAD (M6X1X13-MM)  
28. 128-2136 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
29. 139-6039 [1] NUT-RETAINER (U-TYPE)  
31. 8T-2396 M [1] BOLT (M6X1X60-MM)  
32. 9X-2042 M [13] SCREW-TRUSS HEAD (M6X1X12-MM)  
33. 9X-2045 M [1] SCREW-TRUSS HEAD (M6X1X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP48881201
 

280-1943: TRIM GP-CAB

280-1943 TRIM GP-CAB -REAR
S/N W8P1-UP
PART OF 253-6925, 253-6926, 253-6927, 253-6928, 253-6930 CAB GP
i02608494 SEBP4888
2801943 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your M318D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-1647 [1] GROMMET  
2. 6C-8972 [1] HOOK  
3. 114-6658 [6] WASHER (6.5X17X1-MM THK)  
4. 139-6039 [7] NUT-RETAINER (U-TYPE)  
5. 229-8059 [1] STRIKER (RH)  
6. 229-8060 [1] STRIKER (LH)  
7. 233-7864 [1] FASTENER  
8. 242-1780 [1] BRACKET AS  
9. 247-6852 [1] COVER AS (LOWER, LH)  
  132-5792 M [4] INSERT-THREADED (M4X0.7-THD)  
10. 247-6857 [1] COVER-RADIO  
11. 252-1243 [1] LINER  
12. 262-3663 [2] COVER-SPEAKER  
13. 268-1352 [1] COVER (UPPER, RH)  
14. 268-1353 [1] COVER (UPPER, LH)  
15. 096-3772 M [12] SCREW-MACHINE (M4X0.7X16-MM)  
16. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
17. 108-1780 M [4] BOLT-SOCKET HEAD (M6X1X45-MM)  
18. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
19. 128-2135 M [12] SCREW-TRUSS HEAD (M6X1X13-MM)  
20. 167-7042 [2] SEAL  
21. 180-1718 M [11] NUT (M6X1-THD)  
22. 191-2764 [1] CASE  
23. 191-2768 [1] COVER  
24. 224-2669 [2] PLUG-PLASTIC  
25. 247-6812 [1] PLATE  
26. 5C-9553 M [6] BOLT (M6X1X16-MM)  
27. 5I-3054 M [8] NUT (M4X0.7-THD)  
28. 6C-9131 [2] SCREW-TAPPING  
29. 6C-9235 [1] PLATE-IDENTIFICATION (CAB)  
30. 8T-0269 M [2] BOLT-SOCKET HEAD (M6X1X20-MM)  
31. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
33. 8T-4138 M [2] BOLT (M6X1X20-MM)  
34. 9U-8263 [1] COVER  
35. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
36. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
37. 303-9447 [2] NUT-SPEED  
  M   METRIC PART
 

#SEBP48881202
 

344-5428: TRIM GP-CAB

344-5428 TRIM GP-CAB -EXTERIOR
S/N W8P5000-UP
PART OF 344-5427, 344-5434 CAB GP
i03698514 SEBP4888
3445428 TRIM GP-CAB Parts scheme 3445428 TRIM GP-CAB Parts scheme 3445428 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your M318D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1206 [2] GUIDE  
2. 305-0329 [1] FILTER ELEMENT AS-CAB AIR  
3. 4I-3063 [1] SPRING  
4. 4I-4392 [3] CLIP  
5. 3F-9556 [3] LOCKWASHER  
6. 6V-7636 [4] PIN AS-SPRING  
7. 119-8353 [1] SCREW-SPECIAL  
8. 120-4831 [1] WASHER (18.5X32X1.5-MM THK)  
9. 120-5737 [6] WASHER (17.5X40X4-MM THK)  
10. 129-5167 M [3] SCREW (M6X1X8-MM)  
11. 154-4811 [1] SPACER-SPECIAL  
12. 156-6599 [1] STRIKER  
13. 161-3685 [1] ROD  
14. 164-0527 [1] ROD  
15. 164-0528 Y [1] LEVER GP-CAB DOOR  
16. 167-4146 [1] SUPPORT AS  
17. 167-4148 [1] LEVER  
18. 171-7426 [1] CABLE AS  
19. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
20. 315-5313 [1] COVER  
21. 205-0453 [1] BRACKET  
22. 205-6295 [1] LATCH AS  
23. 217-0559 [1] SEAL-WEATHER  
24. 262-7954 [2] BUMPER  
25. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
26. 345-7830 [1] GUARD  
27. 347-3244 [1] PLUG-FITTING  
28. 111-4627 M [2] SCREW-MACHINE (M6X1X30-MM)  
29. 120-5738 [6] WASHER-RUBBER (14.5X40X2-MM THK)  
30. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
31. 161-3660 [1] BRACKET AS  
32. 176-1996 [2] CLIP  
33. 188-9644 M [2] SCREW-FLAT HEAD (M8X1.25X25-MM)  
34. 247-6801 [1] COVER AS  
35. 5C-7261 M [2] NUT (M8X1.25-THD)  
36. 5J-5003 [9] PLUG  
37. 6C-4000 B [2] SHIM (1-MM THK)  
38. 6V-7357 M [4] BOLT (M6X1X25-MM)  
39. 8C-0572 [2] WASHER (8.8X25.5X2-MM THK)  
40. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4133 M [3] NUT (M10X1.5-THD)  
42. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
43. 8T-4190 M [6] BOLT (M16X2X25-MM)  
44. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
45. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
46. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
47. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
48. 9M-0057 [6] WASHER-RUBBER (1.188X0.5X0.062-IN THK)  
49. 9X-2044 M [8] SCREW-TRUSS HEAD (M6X1X16-MM)  
50. 9X-2446 [1] FILM-IDENTIFICATION (CATERPILLAR)  
51. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
52. 260-2649 E FOAM (144-CM)  
53. 133-3234 E SEAL (71-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48881203
 

344-5428: TRIM GP-CAB

344-5428 TRIM GP-CAB -EXTERIOR
S/N W8P1-UP
PART OF 344-5427, 344-5434 CAB GP
i04019585 SEBP4888
3445428 TRIM GP-CAB Parts scheme 3445428 TRIM GP-CAB Parts scheme 3445428 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your M318D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1206 [2] GUIDE  
2. 293-1183 [1] FILTER GP-CAB AIR  
  293-1184 [1] FILTER ELEMENT-CAB AIR  
3. 4I-3063 [1] SPRING  
4. 4I-4392 [3] CLIP  
5. 3F-9556 [3] LOCKWASHER  
6. 6V-7636 [4] PIN AS-SPRING  
7. 119-8353 [1] SCREW-SPECIAL  
8. 120-4831 [1] WASHER (18.5X32X1.5-MM THK)  
9. 120-5737 [6] WASHER (17.5X40X4-MM THK)  
10. 129-5167 M [3] SCREW (M6X1X8-MM)  
11. 154-4811 [1] SPACER-SPECIAL  
12. 156-6599 [1] STRIKER  
13. 161-3685 [1] ROD  
14. 164-0527 [1] ROD  
15. 164-0528 Y [1] LEVER GP-CAB DOOR  
16. 167-4146 [1] SUPPORT AS  
17. 167-4148 [1] LEVER  
18. 171-7426 [1] CABLE AS  
19. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
20. 315-5313 [1] COVER  
21. 205-0453 [1] BRACKET  
22. 205-6295 [1] LATCH AS  
23. 217-0559 [1] SEAL-WEATHER  
24. 262-7954 [2] BUMPER  
25. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
26. 345-7830 [1] GUARD  
27. 347-3244 [1] PLUG-FITTING  
28. 111-4627 M [2] SCREW-MACHINE (M6X1X30-MM)  
29. 120-5738 [6] WASHER-RUBBER (14.5X40X2-MM THK)  
30. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
31. 161-3660 [1] BRACKET AS  
32. 176-1996 [2] CLIP  
33. 188-9644 M [2] SCREW-FLAT HEAD (M8X1.25X25-MM)  
34. 247-6801 [1] COVER AS  
35. 5C-7261 M [2] NUT (M8X1.25-THD)  
36. 5J-5003 [9] PLUG  
37. 6C-4000 B [2] SHIM (1-MM THK)  
38. 6V-7357 M [4] BOLT (M6X1X25-MM)  
39. 8C-0572 [2] WASHER (8.8X25.5X2-MM THK)  
40. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4133 M [3] NUT (M10X1.5-THD)  
42. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
43. 8T-4190 M [6] BOLT (M16X2X25-MM)  
44. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
45. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
46. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
47. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
48. 9M-0057 [6] WASHER-RUBBER (1.188X0.5X0.062-IN THK)  
49. 9X-2044 M [8] SCREW-TRUSS HEAD (M6X1X16-MM)  
51. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
52. 260-2649 E FOAM (144-CM)  
53. 133-3234 E SEAL (71-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48881204
 

344-5429: TRIM GP-CAB

344-5429 TRIM GP-CAB -INTERIOR, REAR
S/N W8P5000-UP
PART OF 344-5427, 344-5434 CAB GP
i03698521 SEBP4888
3445429 TRIM GP-CAB Parts scheme 3445429 TRIM GP-CAB Parts scheme 3445429 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your M318D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-8972 [1] HOOK  
2. 9U-8263 [1] COVER  
3. 114-6658 [6] WASHER (6.5X17X1-MM THK)  
4. 139-6039 [7] NUT-RETAINER (U-TYPE)  
5. 229-8059 [1] STRIKER (RH)  
6. 229-8060 [1] STRIKER (LH)  
7. 233-7864 [1] FASTENER  
8. 242-1780 [1] BRACKET AS  
9. 361-3872 [1] COVER AS (LOWER, LH)  
10. 262-3663 [2] COVER-SPEAKER  
11. 264-3542 [2] GROMMET  
12. 303-9447 [2] NUT-SPEED  
13. 345-7831 [1] COVER (UPPER RH)  
14. 345-7832 [1] COVER (UPPER LH)  
15. 345-7833 [1] COVER (RADIO)  
16. 345-7834 [1] LINER  
17. 096-3772 M [8] SCREW-MACHINE (M4X0.7X16-MM)  
18. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
19. 108-1780 M [4] BOLT-SOCKET HEAD (M6X1X45-MM)  
20. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
21. 128-2135 M [11] SCREW-TRUSS HEAD (M6X1X13-MM)  
22. 167-7042 [2] SEAL  
23. 180-1718 M [10] NUT (M6X1-THD)  
24. 191-2768 [1] COVER  
25. 224-2669 [2] PLUG-PLASTIC  
26. 247-6812 [1] PLATE  
27. 5C-8312 M [8] NUT (M4X0.7-THD)  
28. 5C-9553 M [6] BOLT (M6X1X16-MM)  
29. 6C-9131 [2] SCREW-TAPPING  
30. 6C-9235 [1] PLATE-IDENTIFICATION (CAB)  
31. 8T-0269 M [2] BOLT-SOCKET HEAD (M6X1X20-MM)  
32. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
34. 8T-4138 M [2] BOLT (M6X1X20-MM)  
35. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
36. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP48881205
 

299-5491: VISOR GP-CAB

299-5491 VISOR GP-CAB -RAIN
S/N W8P1-UP
PART OF 334-5728, 334-5733, 334-5737 OPERATOR AR
i02627777 SEBP4888
2995491 VISOR GP-CAB Parts scheme
  For full view, you need register

Parts for your M318D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-9089 [4] NUT-CAP  
2. 146-0218 M [4] NUT (M6X1-THD)  
3. 353-9906 [1] VISOR  
4. 167-4196 [1] BRACKET  
5. 167-4197 [1] BRACKET  
6. 129-3178 M [4] LOCKNUT (M6X1-THD)  
7. 6C-9130 [16] WASHER (6X18X1-MM THK)  
8. 8T-4971 M [4] BOLT (M6X1X30-MM)  
9. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART
 

#SEBP48881206
 

344-5438: VISOR GP-CAB

344-5438 VISOR GP-CAB
S/N W8P1-UP
PART OF 346-3943 OPERATOR AR, 346-3946, 346-3950, 358-7580 OPTION AR-CAB
CANNOT BE USED WITH GUARD AR-FOGS
i03698890 SEBP4888
3445438 VISOR GP-CAB Parts scheme
  For full view, you need register

Parts for your M318D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-9089 [5] NUT-CAP  
2. 167-4196 [1] BRACKET  
3. 167-4197 [1] BRACKET  
4. 345-1634 [1] VISOR  
5. 129-3178 M [5] LOCKNUT (M6X1-THD)  
6. 6C-9130 [16] WASHER (6X18X1-MM THK)  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 3E-8020 M [1] SCREW-TRUSS HEAD (M6X1X25-MM)  
9. 286-9521 [1] GROMMET  
  M   METRIC PART
 

#SEBP48881207
 

262-7933: WINDOW GP-CAB

262-7933 WINDOW GP-CAB -1-PIECE, FRONT
S/N W8P1-UP
HEAT RESISTANT GLASS
PART OF 253-6925, 253-6928, 344-5427 CAB GP
i02610009 SEBP4888
2627933 WINDOW GP-CAB Parts scheme
  For full view, you need register

Parts for your M318D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-6166 [1] WASHER-HARD (4.5X9X1-MM THK)  
2. 167-4183 [6] BRACKET  
3. 191-2757 [3] BRACKET  
4. 191-2758 [3] BRACKET  
5. 198-1754 [6] HOOK  
6. 204-6101 [6] WASHER-HARD (5.3X10X1-MM THK)  
7. 220-4080 [12] SCREW  
8. 262-7934 [1] GLASS  
9. 6J-6478 [12] WASHER (0.28X0.63X0.13-IN THK)  
10. 6V-9673 M [6] SCREW-MACHINE (M5X0.8X12-MM)  
11. 8T-0337 M [1] SCREW-MACHINE (M4X0.7X12-MM)  
12. 9X-2044 M [12] SCREW-TRUSS HEAD (M6X1X16-MM)  
13. 262-7935 E SEAL (450-CM)  
14. 262-7961 [1] PLATE  
15. 262-7962 [1] PLATE  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP48881208
 

280-1944: WINDOW GP-CAB

280-1944 WINDOW GP-CAB -REAR, SIDE, TOP WINDOWS
S/N W8P1-UP
PART OF 253-6925, 253-6926, 253-6927 CAB GP
i02608464 SEBP4888
2801944 WINDOW GP-CAB Parts scheme
  For full view, you need register

Parts for your M318D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-9236 [2] RETAINER  
2. 6C-9237 [2] RIVET  
3. 151-6790 [1] GLASS (LH)  
4. 167-4067 [1] GLASS (TOP)  
5. 167-4142 [1] GLASS (REAR)  
6. 223-9818 [1] FILM-INSTRUCTION (WINDOW CLEANING, READ OMM)  
7. 276-2331 [1] FILM-INSTRUCTION (EXIT)  
8. 103-8089 [2] RIVET-POP  
9. 133-5514 [1] HAMMER  
10. 234-6489 [1] GLASS (RH)  
 

#SEBP48881209
 

280-1947: WINDOW GP-CAB

280-1947 WINDOW GP-CAB -REAR, SIDE, TOP WINDOWS
S/N W8P1-UP
PART OF 253-6928, 253-6930 CAB GP
i02610402 SEBP4888
2801947 WINDOW GP-CAB Parts scheme
  For full view, you need register

Parts for your M318D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-9237 [2] RIVET  
2. 8T-6842 [1] FILM-INSTRUCTION (PULL RING, ALTERNATE EXIT)  
3. 147-8450 [1] RING-PULL  
4. 167-4067 [1] GLASS (TOP)  
5. 167-7036 [1] GLASS (LH)  
6. 187-0661 [1] FILM-INSTRUCTION (ALTERNATE EXIT)  
7. 205-0445 [1] GLASS (REAR)  
8. 223-9818 [1] FILM-INSTRUCTION (WINDOW CLEANING, READ OMM)  
9. 235-8911 [1] GLASS (RH)  
10. 262-7960 [1] PLATE  
11. 096-0061 [1] STRAP-CABLE  
12. 103-8089 [2] RIVET-POP  
13. 5W-9702 E SEAL-WINDOW (260-CM)  
14. 5W-9703 E SEAL-LOCK (260-CM)  
  E   ORDER BY THE CENTIMETER
 

Information:

Caterpillar Parts SIS Catalog M318D :

TRIM GP-CAB
280-1942 TRIM GP-CAB
TRIM GP-CAB
280-1942 TRIM GP-CAB
SUSPENSION GP-SEAT
366-1890 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
304-5401 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
283-9145 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
283-8336 SUSPENSION GP-SEAT
SUPPORT GP-SEAT
250-9607 SUPPORT GP-SEAT
STEERING COLUMN GP-ADJUSTABLE
354-6127 STEERING COLUMN GP-ADJUSTABLE
TRIM GP-CAB
280-1943 TRIM GP-CAB
TRIM GP-CAB
344-5428 TRIM GP-CAB
TRIM GP-CAB
344-5428 TRIM GP-CAB
TRIM GP-CAB
344-5429 TRIM GP-CAB
VISOR GP-CAB
299-5491 VISOR GP-CAB
VISOR GP-CAB
344-5438 VISOR GP-CAB
WINDOW GP-CAB
262-7933 WINDOW GP-CAB
WINDOW GP-CAB
280-1944 WINDOW GP-CAB

Truck sale:

Caterpillar M318D
 
Caterpillar M318D
- wheel excavator
MICHIGAN CAT
Caterpillar M318D, wheel excavator, Construction
71,462 
Caterpillar M318D, wheel excavator, Construction
- wheel excavator
BERGERAT MONNOYEUR S.A.S.
Caterpillar M318D, wheel excavator, Construction
88,000 
Caterpillar M318D, wheel excavator, Construction
- wheel excavator
MACALLISTER MACHINERY CO., INC
 
52,962 
Caterpillar M318D, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M318D, wheel excavator, Construction
 
Caterpillar M318D, wheel excavator, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.