HYDRAULIC SYSTEM
LINES GP-HYDRAULICHYDRAULIC GP
OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
LINES GP-AUXILIARYHYDRAULIC SYSTEM
LINES GP-HYDRAULIC
#SEBP49230400
194-0181: HOSE GP-HYDRAULIC
For full view, you need register
#SEBP49230401
194-0182: HOSE GP-HYDRAULIC
For full view, you need register
#SEBP49230402
259-7423: HYDRAULIC AR
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 259-5237 Y | [1] | FASTENER GP-WIRING HARNESS (HEAVY LIFT) | ||
| 245-5178 Y | [1] | LINES GP-FRONT (BOOM CYLINDER) | ||
| 245-5179 Y | [1] | LINES GP-FRONT (CONTROL VALVE) | ||
| 248-9831 Y | [1] | LINES GP-CONTROL (CONTROL VALVE, PUMP) | ||
| 248-9833 Y | [1] | LINES GP-HYDRAULIC OIL COOLER | ||
| 248-9825 Y | [1] | LINES GP-PILOT (JOYSTICK, PEDALS) | ||
| 248-9826 Y | [1] | LINES GP-PILOT (TRAVEL) | ||
| 248-9827 Y | [1] | LINES GP-PILOT (CONTROL VALVE, PUMP) | ||
| 248-9829 Y | [1] | LINES GP-PILOT (PUMP) | ||
| 255-1659 Y | [1] | LINES GP-PILOT (HEAVY LIFT) | ||
| 227-0548 Y | [1] | LINES GP-PUMP (SUPPLY) | ||
| 227-0543 Y | [1] | LINES GP-TRAVEL MOTOR | ||
| 260-7868 Y | [1] | MOUNTING GP-MAIN CONTROL VALVE | ||
| 233-1115 Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC | ||
| 227-0565 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 259-7424 Y | [1] | VALVE GP-MAIN CONTROL (HEAVY LIFT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49230403
234-6613: LEVER GP-CONTROL
234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N PAL1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
S/N PAL1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 3. | 111-4799 | [1] | SWITCH AS-LIMIT (NEUTRAL START) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5998 D | TUBE (0.3-M) | |||
| 4. | 185-8286 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | |
| 5. | 234-6615 | [1] | KNOB | |
| 6. | 087-4683 | [2] | LOCKWASHER | |
| 7. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP49230404
245-2399: LINES GP-AUXILIARY HYDRAULIC
245-2399 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N PAL1-UP
Type 1
FOR USE WITH 1.9 TO 2.0-M (6.2 TO 6.6-FT) STICK
AN ATTACHMENT
S/N PAL1-UP
Type 1
FOR USE WITH 1.9 TO 2.0-M (6.2 TO 6.6-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 207-6282 I | [1] | HOSE AS | |
| 2. | 262-3225 I | [1] | HOSE AS | |
| 3. | 277-0954 CY | [2] | VALVE GP-MANUAL | |
| 4. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 5. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 6. | 1P-5767 | [4] | FLANGE-HALF | |
| 7. | 6V-0400 | [4] | FLANGE-HALF | |
| 8. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 10. | 8T-4194 M | [12] | BOLT (M12X1.75X50-MM) | |
| 11. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49230405
245-2399: LINES GP-AUXILIARY HYDRAULIC
245-2399 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N PAL1-UP
Type 2
FOR USE WITH 1.9 TO 2.0-M (6.2 TO 6.6-FT) STICK
AN ATTACHMENT
S/N PAL1-UP
Type 2
FOR USE WITH 1.9 TO 2.0-M (6.2 TO 6.6-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 207-6282 I | [1] | HOSE AS | |
| 2. | 262-3225 I | [1] | HOSE AS | |
| 3. | 389-2407 CY | [2] | VALVE GP-MANUAL (AUXILIARY, SHUTOFF, 2-WAY FLOW) | |
| 4. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 5. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 6. | 1P-5767 | [4] | FLANGE-HALF | |
| 7. | 6V-0400 | [4] | FLANGE-HALF | |
| 8. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 10. | 8T-4194 M | [12] | BOLT (M12X1.75X50-MM) | |
| 11. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49230406
253-6591: LINES GP-AUXILIARY HYDRAULIC
253-6591 LINES GP-AUXILIARY HYDRAULIC -STICK, MEDIUM PRESSURE
S/N PAL1-UP
FOR USE WITH 1.9 TO 2-M (6.2 TO 6.6-FT) STICK
AN ATTACHMENT
S/N PAL1-UP
FOR USE WITH 1.9 TO 2-M (6.2 TO 6.6-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-6760 | [2] | MANIFOLD | |
| 2. | 149-1738 | [4] | CLIP | |
| 3. | 187-9977 | [2] | PLATE | |
| 4. | 188-0055 | [2] | TUBE AS | |
| 5. | 188-0056 | [2] | SUPPORT AS | |
| 6. | 250-1440 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 7X-3164 | [1] | ADAPTER-SWIVEL | ||
| 7. | 262-3228 I | [2] | HOSE AS | |
| 8. | 6V-8398 | [4] | SEAL-O-RING | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 12. | 8T-4185 M | [4] | BOLT (M10X1.5X50-MM) | |
| 13. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 7X-2543 M | [4] | BOLT (M10X1.5X120-MM) | |
| (USED WITH AUXILIARY HYDRAULIC-HIGH FLOW LINES) | ||||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP49230407
281-8231: LINES GP-AUXILIARY HYDRAULIC
281-8231 LINES GP-AUXILIARY HYDRAULIC
S/N PAL1-UP
FOR USE WITH 2.65-M (8.7-FT) STICK
AN ATTACHMENT
S/N PAL1-UP
FOR USE WITH 2.65-M (8.7-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 325D L EXCAVATOR:
#SEBP49230408
292-0442: LINES GP-AUXILIARY HYDRAULIC
292-0442 LINES GP-AUXILIARY HYDRAULIC -BOOM, MEDIUM PRESSURE
S/N PAL1-UP
FOR USE WITH 6.2-M (20.3-FT) BOOM
AN ATTACHMENT
S/N PAL1-UP
FOR USE WITH 6.2-M (20.3-FT) BOOM
AN ATTACHMENT
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 157-9338 | [1] | PLATE | |
| 2. | 7Y-4868 | [5] | CLIP | |
| 3. | 179-5260 | [4] | CLIP | |
| 4. | 247-9298 | [4] | CLIP AS | |
| 5. | 292-2296 | [2] | TUBE AS | |
| 6. | 292-2297 | [2] | TUBE AS | |
| 7. | 292-2463 | [1] | PLATE | |
| 8. | 292-2464 | [1] | PLATE | |
| 9. | 292-2747 | [2] | TUBE AS | |
| 10. | 292-2748 | [2] | TUBE AS | |
| 11. | 292-2828 | [1] | CLIP | |
| 12. | 292-8445 | [1] | PLATE | |
| 13. | 096-5766 | [9] | CLAMP | |
| 14. | 4S-8002 | [4] | CLAMP | |
| 15. | 7J-9108 | [4] | SEAL-O-RING | |
| 16. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 18. | 8T-4139 M | [14] | BOLT (M12X1.75X30-MM) | |
| 19. | 8T-4178 M | [1] | BOLT (M10X1.5X90-MM) | |
| 20. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 21. | 8T-4185 M | [5] | BOLT (M10X1.5X50-MM) | |
| 22. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 23. | 8T-4223 | [20] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 24. | 8T-4244 M | [10] | NUT (M12X1.75-THD) | |
| 25. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 26. | 8T-7930 M | [2] | BOLT (M12X1.75X160-MM) | |
| M | METRIC PART | |||
#SEBP49230409
292-0445: LINES GP-AUXILIARY HYDRAULIC
292-0445 LINES GP-AUXILIARY HYDRAULIC -STICK, MEDIUM PRESSURE
S/N PAL1-UP
FOR USE WITH 3.2-M (10.5-FT) STICK
AN ATTACHMENT
S/N PAL1-UP
FOR USE WITH 3.2-M (10.5-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-6760 | [4] | MANIFOLD | |
| 2. | 187-9978 | [2] | SUPPORT AS | |
| 3. | 250-1440 | [4] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 7X-3164 | [1] | ADAPTER-SWIVEL | ||
| 4. | 253-6455 | [4] | TUBE AS | |
| 5. | 253-6566 I | [4] | HOSE AS | |
| 6. | 293-8562 | [2] | PLATE | |
| 7. | 293-8596 | [2] | SUPPORT AS | |
| 8. | 153-8867 | [8] | CLIP | |
| 9. | 6V-8398 | [8] | SEAL-O-RING | |
| 10. | 7X-2543 HM | [4] | BOLT (M10X1.5X120-MM) | |
| 11. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4136 LM | [4] | BOLT (M10X1.5X25-MM) | |
| 13. | 8T-4139 LM | [16] | BOLT (M12X1.75X30-MM) | |
| 14. | 8T-4183 HM | [8] | BOLT (M12X1.75X40-MM) | |
| 15. | 8T-4185 M | [8] | BOLT (M10X1.5X50-MM) | |
| 16. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| H | WHEN USED WITH LINES GP-AUX HYD (HIGH FLOW) | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| L | WHEN USED WITHOUT LINES GP-AUX HYD (HIGH FLOW) | |||
| M | METRIC PART | |||
Information:
HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Reuse And Salvage Guidelines
