AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

233-1157 PISTON & ROD GP S/N MAE1-UP PART OF 287-0101 ENGINE AR, 305-4783 ENGINE AR-COMPLETE ALSO AN ATTACHMENT 320D


BASIC ENGINE
PISTON & ROD GP
PULLEY GP
BELT TIGHTENER GP
VALVE MECHANISM GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
OIL CHANGE GP-HIGH SPEED
LINES GP-ENGINE OIL

EXCAVATOR 320D EXCAVATOR JGZ
 320D & 320D L Excavators JGZ00001-UP (MACHINE) POWERED BY 3066 Engine SEBP4932 320D JGZ   (2006)

BASIC ENGINE

PISTON & ROD GP
PISTON & ROD GP
233-1157 PISTON & ROD GP
 

#SEBP49320030
 

233-1157: PISTON & ROD GP

233-1157 PISTON & ROD GP
S/N MAE1-UP
PART OF 287-0101 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02541352 SEBP4932
2331157 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-6543 J [6] SET-PISTON RING (STANDARD)  
  178-6544 ABJ [6] SET-PISTON RING (0.25-MM OS)  
  178-6545 ABJ [6] SET-PISTON RING (0.5-MM OS)  
2. 297-7751 [6] PISTON  
  297-7756 AB [6] PISTON (0.25 MM OS)  
  297-7757 AB [6] PISTON (0.50 MM OS)  
3. 094-7134 [6] PIN  
4. 5I-7667 [12] RING  
5. 5I-7668 [6] ROD AS  
    (EACH INCLUDES)
5A. 5I-7539 [1] BUSHING  
5B. 094-7154 [2] BOLT (M12X1.25X85-MM)  
5C. 094-7516 [2] NUT (M12X1.25-THD)  
6. 5I-7637 [12] BEARING  
  5I-7794 AB [12] BEARING (0.25-MM US)  
  5I-7795 AB [12] BEARING (0.5-MM US)  
  5I-7796 AB [12] BEARING (0.75-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   INCLUDES A COMPLETE SET OF RINGS FOR ONE PISTON
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP49320031
 

239-6561: PULLEY GP-ENGINE

239-6561 PULLEY GP-ENGINE
S/N MAE1-UP
PART OF 305-4783 ENGINE AR-COMPLETE
i02886276 SEBP4932
2396561 PULLEY GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-8584 [1] PULLEY (WATER PUMP)  
2. 222-8372 [1] BELT-SERPENTINE  
3. 327-7204 [1] PULLEY AS (DRIVE)  
  5I-7540 [1] SLEEVE  
4. 266-6337 [1] PULLEY (FAN DRIVE)  
5. 305-4908 Y [1] PULLEY GP-IDLER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49320032
 

266-6313: PULLEY GP-ENGINE

266-6313 PULLEY GP-ENGINE
S/N MDE1-UP; JGZ1-UP
PART OF 287-0083, 287-0085 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02546549 SEBP4932
2666313 PULLEY GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 305-4908 Y [1] PULLEY GP-IDLER  
2. 212-8584 [1] PULLEY (WATER PUMP)  
3. 327-7206 [1] PULLEY AS  
3A. 5I-7540 [1] SLEEVE  
4. 212-8585 [1] BELT-SERPENTINE (FAN)  
5. 266-6229 [1] PULLEY-FAN DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49320033
 

266-6317: PULLEY GP-ENGINE

266-6317 PULLEY GP-ENGINE
S/N MDE1-UP; JGZ1-UP
PART OF 287-0084 ENGINE AR-COMPLETE
AN ATTACHMENT
i02572967 SEBP4932
2666317 PULLEY GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 305-4908 Y [1] PULLEY GP-IDLER (BELT TENSIONING)  
2. 212-8584 [1] PULLEY (WATER PUMP)  
3. 212-8585 [1] BELT-SERPENTINE  
4. 327-7204 [1] PULLEY AS (DRIVE)  
  5I-7540 [1] SLEEVE  
5. 266-6327 [1] PULLEY  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49320034
 

255-3018: PULLEY GP-IDLER

255-3018 PULLEY GP-IDLER
S/N MDE1-UP; JGZ1-UP
PART OF 239-6507 COMPRESSOR GP-REFRIGERANT
i02385083 SEBP4932
2553018 PULLEY GP-IDLER Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 255-3022 M [1] NUT (M10X1.25-THD)  
2. 239-6626 [1] PULLEY-IDLER  
3. 239-6627 M [1] BOLT (M8X1.25X110-MM)  
4. 239-6632 [1] RING-SNAP  
5. 255-3020 [1] SHAFT  
6. 255-3021 [1] WASHER  
7. 239-6630 [1] COLLAR  
8. 239-6631 [1] BEARING AS-BALL  
  M   METRIC PART
 

#SEBP49320035
 

305-4908: PULLEY GP-IDLER

305-4908 PULLEY GP-IDLER
PART OF 239-6561, 266-6313, 266-6317 PULLEY GP-ENGINE
ALSO AN ATTACHMENT
i02766884 SEBP4932
3054908 PULLEY GP-IDLER Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 305-4907 [1] BRACKET  
2. 294-1784 [1] PULLEY  
3. 294-1785 [2] BEARING  
4. 294-1786 [1] RING  
5. 8T-9598 [2] RING-RETAINING  
6. 305-4906 [1] COVER  
7. 305-4905 [1] BOLT (M10X1.25X20-MM)  
 

#SEBP49320036
 

212-8544: VALVE MECHANISM GP

212-8544 VALVE MECHANISM GP
S/N MAE1-UP
PART OF 287-0101 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02252695 SEBP4932
2128544 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-4921 [2] BOLT (M12X1.25X21-MM)  
2. 5I-7720 [2] PIPE  
3. 5I-7622 [4] RING  
4. 2W-6047 [4] WASHER (22.05X31.75X0.89-MM THK)  
5. 5I-7590 B [6] ROCKER AS  
  5I-7590 B [6] ROCKER AS  
    (EACH ROCKER AS INCLUDES)
6. 5I-7631 [1] BUSHING  
7. 091-3474 M [1] NUT (M8X1.25-THD)  
8. 094-9525 [1] SCREW  
9. 5I-7722 [6] BRACKET  
10. 3B-4505 [12] LOCKWASHER  
11. 5I-7730 [6] BOLT (M8X1.25X103-MM)  
12. 8T-4189 M [6] BOLT (M8X1.25X20-MM)  
13. 5I-7721 [4] SPRING  
14. 5I-7731 [2] SHAFT AS-ROCKER ARM  
    (EACH INCLUDES)
15. 094-4696 [1] PLUG  
16. 5I-7630 [12] CAP  
17. 5I-7719 [24] RETAINER  
18. 5I-7625 [12] RETAINER  
19. 5I-7624 [12] SEAL  
20. 5I-7740 [12] SPRING  
21. 5I-7739 [6] VALVE (EXHAUST)  
22. 212-8477 [6] VALVE (INLET)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49320037
 

212-8554: FILTER GP-ENGINE OIL

212-8554 FILTER GP-ENGINE OIL
S/N MAE1-UP
PART OF 287-0101 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02251004 SEBP4932
2128554 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0739 [1] FILTER AS-ENGINE OIL (STANDARD EFFICIENCY)  
2. 183-8179 [1] BASE AS  
2A. 096-3321 [2] PLUG  
3. 178-6569 [1] PLUG  
4. 5I-8026 [1] VALVE AS  
5. 5B-5947 [2] GASKET  
6. 8C-3446 [1] VALVE-SAMPLING  
7. 178-6567 [1] SEAL-O-RING  
8. 196-8192 [1] BOLT (M16X1.5X53-MM)  
9. 178-6566 M [1] NUT (M16X1.5-THD)  
10. 4I-9404 [2] SEAL-O-RING  
11. 168-0582 [1] COVER  
12. 125-2972 [1] GASKET  
13. 5I-8066 [1] VALVE AS-RELIEF  
14. 196-8226 [1] HOSE  
15. 196-8227 [1] CLAMP  
16. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
17. 3B-4505 [6] LOCKWASHER  
18. 5I-7505 [1] PLUG  
19. 178-6576 M [1] BOLT (M8X1.25X75-MM)  
20. 178-6577 M [2] BOLT (M8X1.25X100-MM)  
21. 196-8191 [1] BRACKET AS  
22. 8T-4136 M [10] BOLT (M10X1.5X25-MM)  
23. 7X-0796 [12] LOCKWASHER  
24. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
25. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
27. 178-6571 [1] GASKET  
28. 125-2979 [1] GASKET  
29. 8T-7329 M [1] BOLT (M8X1.25X55-MM)  
30. 8C-3445 [1] CAP-DUST  
  M   METRIC PART
 

#SEBP49320038
 

323-4762: KIT-HIGH SPEED OIL CHANGE

323-4762 KIT-HIGH SPEED OIL CHANGE -ENGINE, HYDRAULIC
S/N MDE1-UP; JGZ1-UP
FIELD INSTALLATION
i03898691 SEBP4932
3234762 KIT-HIGH SPEED OIL CHANGE Parts scheme 3234762 KIT-HIGH SPEED OIL CHANGE Parts scheme 3234762 KIT-HIGH SPEED OIL CHANGE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-2043 [1] NUT-BULKHEAD (1-5/8-12-THD)  
2. 5B-3180 [1] NUT (5/16-18-THD)  
3. 110-8827 [1] FITTING (QUICK DISCONNECT, MALE)  
4. 118-0166 [1] FITTING (QUICK DISCONNECT, MALE)  
5. 193-3973 [9] STRAP-CABLE  
6. 200-6345 [6] MOUNT (DUAL SWIVEL)  
7. 321-8629 [1] ELBOW  
8. 321-8665 [1] PLUG-DRAIN  
9. 322-8603 [1] BRACKET AS  
10. 322-8604 [2] BRACKET  
11. 323-0210 [1] BLOCK-HYDRAULIC  
12. 117-8568 [1] NUT-BULKHEAD (1-7/8-12-THD)  
13. 148-8339 [1] CONNECTOR AS  
  6V-8716 [1] CONNECTOR (STRAIGHT)  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
14. 148-8355 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9005 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
15. 148-8357 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9008 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
16. 148-8360 [1] ELBOW AS  
  6V-9182 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
17. 165-4927 [1] CONNECTOR AS  
  2T-2991 [1] CONNECTOR  
  4K-1388 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
18. 169-7409 [1] UNION AS  
  6V-8996 [1] UNION  
  7J-9108 [2] SEAL-O-RING  
19. 2B-0858 [1] PLUG-PIPE  
20. 2S-4078 [1] SEAL-O-RING  
21. 305-2124 [3] STRAP-CABLE  
22. 330-9758 [1] ELBOW AS  
  8T-4149 [1] ELBOW  
  228-7092 [1] SEAL-O-RING  
  238-5084 [1] SEAL-O-RING  
23. 3C-3681 M [2] NUT (M6X1-THD)  
24. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
25. 4J-5267 [1] SEAL-O-RING  
26. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
27. 6V-8214 M [2] BOLT (M6X1X20-MM)  
28. 6V-9170 [1] NUT-BULKHEAD (1-14-THD)  
29. 7J-9108 [1] SEAL-O-RING  
30. 7X-2470 [1] ADAPTER  
31. 8S-0948 [1] CLIP  
32. 8S-7271 [1] SETSCREW  
33. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4133 M [1] NUT (M10X1.5-THD)  
35. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
36. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
37. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
38. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
39. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
40. 8T-5093 M [2] BOLT-LOCKING (M8X1.25X25-MM)  
41. 9X-2332 [2] CLIP  
42. 9X-8250 [1] CLIP  
43. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
   
    KIT DOES NOT INCLUDE HOSE ASSEMBLIES. HOSE ASSEMBLY PART NUMBERS SHOWN IN GRAPHIC MUST BE FABRICATED BY YOUR CATERPILLAR
    DEALER. REFER TO SPECIAL INSTRUCTION REHS3995 FOR ADDITIONAL INFORMATION
  M   METRIC PART
 

#SEBP49320039
 

178-6524: LINES GP-ENGINE OIL

178-6524 LINES GP-ENGINE OIL
S/N MAE1-UP
PART OF 287-0101 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01357557 SEBP4932
1786524 LINES GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7640 [1] SPRING  
2. 5I-7643 [1] VALVE  
3. 5I-7644 [1] PLUG  
4. 178-6563 [1] STRAINER  
5. 5I-7642 [1] PLATE  
6. 9J-2089 [1] WASHER  
7. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
8. 095-8638 [4] WASHER-SPRING  
9. 5I-5038 [1] SEAL-O-RING  
10. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

Information:

Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Piston and Rings
3064 and 3066 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
3064 and 3066 Engines for Caterpillar Built Machines
Connecting Rod
3064 and 3066 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3064 and 3066 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
3064 and 3066 Engines for Caterpillar Built Machines
Connecting Rod - Inspect
3064 and 3066 Engines for Caterpillar Built Machines
Piston Height - Inspect
3064 and 3066 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Engine Crankcase Pressure (Blowby) - Test
3064 and 3066 Engines for Caterpillar Built Machines
Compression - Test
3064 and 3066 Engines for Caterpillar Built Machines
Compression - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines
Connecting Rod - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Piston Height - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 320D :

PAN GP-OIL
178-6516 PAN GP-OIL
MOUNTING GP-STARTING MOTOR
125-2963 MOUNTING GP-STARTING MOTOR
MOUNTING GP-ENGINE
266-6297 MOUNTING GP-ENGINE
MOUNTING GP-ALTERNATOR
266-6316 MOUNTING GP-ALTERNATOR
HOUSING GP-FRONT
212-8547 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
196-7972 HOUSING GP-FLYWHEEL
GEAR GP-FRONT
212-8550 GEAR GP-FRONT
FLYWHEEL GP
205-6792 FLYWHEEL GP
PULLEY GP-ENGINE
239-6561 PULLEY GP-ENGINE
PULLEY GP-ENGINE
266-6313 PULLEY GP-ENGINE
PULLEY GP-ENGINE
266-6317 PULLEY GP-ENGINE
PULLEY GP-IDLER
255-3018 PULLEY GP-IDLER
PULLEY GP-IDLER
305-4908 PULLEY GP-IDLER
VALVE MECHANISM GP
212-8544 VALVE MECHANISM GP
FILTER GP-ENGINE OIL
212-8554 FILTER GP-ENGINE OIL
KIT-HIGH SPEED OIL CHANGE
323-4762 KIT-HIGH SPEED OIL CHANGE

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.