HYDRAULIC SYSTEM
HYDRAULIC GPOPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
LINES GP-AUXILIARYHYDRAULIC SYSTEM
HYDRAULIC GP#SEBP49540530
285-1355: HYDRAULIC AR
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 239-1699 Y | [1] | LINES GP-BOOM CYLINDER | ||
| 239-1714 Y | [1] | LINES GP-FRONT | ||
| 248-9846 Y | [1] | LINES GP-HYDRAULIC OIL COOLER (CONTROL VALVE, PUMP) | ||
| 248-9848 Y | [1] | LINES GP-HYDRAULIC OIL COOLER (CLAMP, HOSE) | ||
| 248-9825 Y | [1] | LINES GP-PILOT (JOYSTICK, PEDALS) | ||
| 248-9850 Y | [1] | LINES GP-PILOT (MAIN CONTROL VALVE) | ||
| 248-9851 Y | [1] | LINES GP-PILOT (MAIN CONTROL VALVE) | ||
| 248-9852 Y | [1] | LINES GP-PILOT (FILTER, PILOT PUMP) | ||
| 248-9847 Y | [1] | LINES GP-PUMP (SUPPLY, MAIN PUMP) | ||
| 239-1717 Y | [1] | LINES GP-TRAVEL MOTOR (LONG UNDERCARRIAGE) | ||
| 260-7868 Y | [1] | MOUNTING GP-MAIN CONTROL VALVE | ||
| 279-7869 Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC | ||
| 239-1710 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 259-7464 Y | [1] | VALVE GP-MAIN CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49540531
389-9552: HYDRAULIC AR
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP49540532
423-5687: HYDRAULIC AR
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP49540533
423-5688: HYDRAULIC AR
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP49540534
423-5689: HYDRAULIC AR
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP49540535
423-5690: HYDRAULIC AR
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP49540536
234-6613: LEVER GP-CONTROL
234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N A6F1-UP; A8F1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 3. | 111-4799 | [1] | SWITCH AS-LIMIT (HYDRAULIC LOCKOUT) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5998 D | TUBE (0.3-M) | |||
| 4. | 185-8286 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | |
| 5. | 234-6615 | [1] | KNOB | |
| 6. | 087-4683 | [2] | LOCKWASHER | |
| 7. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP49540537
237-3184: LINES GP-AUXILIARY HYDRAULIC
237-3184 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N A6F1-UP; A8F1-UP
PART OF 342-1372, 366-6583 OPTION AR-LINKAGE
Type 1
FOR USE WITH 2.4 TO 2.5-M (7.9 TO 8.2-FT) STICK
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
PART OF 342-1372, 366-6583 OPTION AR-LINKAGE
Type 1
FOR USE WITH 2.4 TO 2.5-M (7.9 TO 8.2-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-6780 | [1] | TUBE AS | |
| 2. | 142-6582 | [1] | TUBE AS | |
| 3. | 173-7916 | [4] | CLAMP-HALF | |
| 4. | 253-6694 I | [1] | HOSE AS | |
| 5. | 253-6697 I | [1] | HOSE AS | |
| 6. | 277-0954 Y | [2] | VALVE GP-MANUAL | |
| 7. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 8. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 9. | 1P-5767 | [4] | FLANGE-HALF | |
| 10. | 6V-0400 | [4] | FLANGE-HALF | |
| 11. | 7Y-4538 | [4] | CLAMP-HALF | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 14. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 15. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 16. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49540538
237-3184: LINES GP-AUXILIARY HYDRAULIC
237-3184 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N A6F1-UP; A8F1-UP
PART OF 342-1372 OPTION AR-LINKAGE
Type 2
FOR USE WITH 2.4 TO 2.5-M (7.9 TO 8.2-FT) STICK
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
PART OF 342-1372 OPTION AR-LINKAGE
Type 2
FOR USE WITH 2.4 TO 2.5-M (7.9 TO 8.2-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-6780 | [1] | TUBE AS | |
| 2. | 142-6582 | [1] | TUBE AS | |
| 3. | 173-7916 | [4] | CLAMP-HALF | |
| 4. | 253-6694 I | [1] | HOSE AS | |
| 5. | 253-6697 I | [1] | HOSE AS | |
| 6. | 389-2407 CY | [2] | VALVE GP-MANUAL (AUXILIARY, SHUTOFF, 2-WAY FLOW) | |
| 7. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 8. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 9. | 1P-5767 | [4] | FLANGE-HALF | |
| 10. | 6V-0400 | [4] | FLANGE-HALF | |
| 11. | 7Y-4538 | [4] | CLAMP-HALF | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4139 M | [12] | BOLT (M12X1.75X30-MM) | |
| 15. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 16. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49540539
242-6475: LINES GP-AUXILIARY HYDRAULIC
242-6475 LINES GP-AUXILIARY HYDRAULIC -BOOM, HIGH PRESSURE
S/N A6F1-UP; A8F1-UP
PART OF 342-1372, 342-1373, 366-6583, 366-6584 OPTION AR-LINKAGE
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
PART OF 342-1372, 342-1373, 366-6583, 366-6584 OPTION AR-LINKAGE
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-1107 | [1] | GROMMET | |
| 2. | 129-5874 | [1] | GROMMET | |
| 3. | 138-5708 | [2] | CLIP-HALF | |
| 4. | 153-8798 | [2] | PLATE | |
| 5. | 173-7916 | [6] | CLAMP-HALF | |
| 6. | 173-7995 | [1] | PLATE | |
| 7. | 193-6606 | [2] | PLATE | |
| 8. | 202-7127 | [1] | PLATE | |
| 9. | 202-7128 | [2] | PLATE | |
| 10. | 216-6589 I | [1] | HOSE AS | |
| 11. | 306-1611 J | [1] | TUBE GP | |
| 11A. | 306-1614 L | [1] | TUBE AS | |
| 11B. | 306-1615 L | [1] | TUBE AS | |
| 11C. | 1P-3705 L | [1] | SEAL-RECTANGULAR | |
| 11D. | 8T-4183 LM | [4] | BOLT (M12X1.75X40-MM) | |
| 12. | 247-9030 J | [1] | TUBE GP | |
| 12A. | 247-9033 L | [1] | TUBE AS | |
| 12B. | 247-9034 L | [1] | TUBE AS | |
| 12C. | 1P-3703 L | [1] | SEAL-RECTANGULAR | |
| 12D. | 8T-4139 LM | [4] | BOLT (M12X1.75X30-MM) | |
| 13. | 277-0786 | [1] | SUPPORT AS | |
| 14. | 288-7502 I | [1] | HOSE AS | |
| 15. | 124-1108 | [2] | CLIP | |
| 16. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 17. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 18. | 1P-5767 | [4] | FLANGE-HALF | |
| 19. | 6V-0400 | [4] | FLANGE-HALF | |
| 20. | 7X-2549 M | [4] | BOLT (M12X1.75X100-MM) | |
| 21. | 453-1259 M | [2] | BOLT (M16X2X40-MM) | |
| 22. | 7Y-4538 | [6] | CLAMP-HALF | |
| 23. | 8T-4139 M | [10] | BOLT (M12X1.75X30-MM) | |
| 24. | 8T-4184 M | [14] | BOLT (M12X1.75X45-MM) | |
| 25. | 8T-4194 M | [10] | BOLT (M12X1.75X50-MM) | |
| 26. | 8T-4223 | [42] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 8T-4648 M | [4] | BOLT (M12X1.75X70-MM) | |
| 28. | 451-2175 | [2] | WASHER-HARD (17.5X30X3.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN (2-PIECE SHOWN) | |||
| L | PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN | |||
| M | METRIC PART | |||
Information:
HYDRAULIC SYSTEM
HYDRAULIC GP
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING 0.75", 1.0", 1.25", AND 1.5" XT6 HYDRAULIC HOSES ON CERTAIN 320D HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING 0.75", 1.0", 1.25", AND 1.5" XT6 HYDRAULIC HOSES ON CERTAIN 320D HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING 0.75", 1.0", 1.25", AND 1.5" XT6 HYDRAULIC HOSES ON CERTAIN 320D HYDRAULIC EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
