HYDRAULIC SYSTEM
LINES GP-AUXILIARYHYDRAULIC SYSTEM
LINES GP-AUXILIARY
#SEBP49540540
242-6476: LINES GP-AUXILIARY HYDRAULIC
242-6476 LINES GP-AUXILIARY HYDRAULIC -BOOM, MEDIUM PRESSURE
S/N A6F1-UP; A8F1-UP
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-8867 | [2] | CLIP | |
| 2. | 173-7895 | [4] | CLIP | |
| 3. | 179-5260 | [4] | CLIP | |
| 4. | 202-3915 | [1] | PLATE | |
| 5. | 247-9129 | [1] | TUBE AS | |
| 6. | 247-9132 J | [1] | TUBE GP | |
| 6A. | 247-9135 L | [1] | TUBE AS | |
| 6B. | 247-9138 L | [1] | TUBE AS | |
| 6C. | 7J-9108 L | [1] | SEAL-O-RING | |
| 7. | 247-9141 | [1] | TUBE AS | |
| 8. | 247-9144 J | [1] | TUBE GP | |
| 8A. | 247-9147 L | [1] | TUBE AS | |
| 8B. | 268-6787 L | [1] | TUBE AS | |
| 8C. | 7J-9108 L | [1] | SEAL-O-RING | |
| 9. | 247-9298 | [1] | CLIP AS | |
| 10. | 294-3796 C | [1] | PLATE | |
| 11. | 294-3797 C | [1] | PLATE | |
| 12. | 268-6790 | [1] | CLIP AS | |
| 13. | 093-1291 C | [2] | CLAMP | |
| 14. | 6V-8398 | [4] | SEAL-O-RING | |
| 15. | 7J-9108 | [2] | SEAL-O-RING | |
| 16. | 7X-2549 M | [2] | BOLT (M12X1.75X100-MM) | |
| 17. | 7Y-4868 | [2] | CLIP | |
| 18. | 8T-4121 C | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4194 CM | [4] | BOLT (M12X1.75X50-MM) | |
| 20. | 8T-4139 M | [12] | BOLT (M12X1.75X30-MM) | |
| 21. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 22. | 8T-4185 CM | [2] | BOLT (M10X1.5X50-MM) | |
| 23. | 8T-4223 C | [22] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 24. | 8T-4244 M | [12] | NUT (M12X1.75-THD) | |
| 25. | 294-3795 C | [2] | CLIP AS | |
| 26. | 294-3794 C | [2] | CLIP AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN (2-PIECE SHOWN) | |||
| L | PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN | |||
| M | METRIC PART | |||
#SEBP49540541
242-6479: LINES GP-AUXILIARY HYDRAULIC
242-6479 LINES GP-AUXILIARY HYDRAULIC -MASS BOOM, HIGH PRESSURE
S/N A6F1-UP; A8F1-UP
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-1107 | [1] | GROMMET | |
| 2. | 129-5874 | [1] | GROMMET | |
| 3. | 138-5708 | [2] | CLIP-HALF | |
| 4. | 153-8798 | [2] | PLATE | |
| 5. | 173-7916 | [6] | CLAMP-HALF | |
| 6. | 173-7995 | [1] | PLATE | |
| 7. | 193-6606 | [2] | PLATE | |
| 8. | 202-7127 | [1] | PLATE | |
| 9. | 202-7128 | [2] | PLATE | |
| 10. | 216-6589 I | [1] | HOSE AS | |
| 11. | 226-3065 J | [1] | TUBE GP | |
| 1P-3705 L | [1] | SEAL-RECTANGULAR | ||
| 11A. | 179-5005 L | [1] | TUBE AS | |
| 11B. | 179-5006 L | [1] | TUBE AS | |
| 11C. | 8T-4183 LM | [4] | BOLT (M12X1.75X40-MM) | |
| 12. | 288-7502 I | [1] | HOSE AS | |
| 13. | 268-6966 J | [1] | TUBE GP | |
| 1P-3703 L | [1] | SEAL-RECTANGULAR | ||
| 13A. | 268-6969 L | [1] | TUBE AS | |
| 13B. | 268-6970 L | [1] | TUBE AS | |
| 13C. | 8T-4139 LM | [4] | BOLT (M12X1.75X30-MM) | |
| 14. | 277-0786 | [1] | SUPPORT AS | |
| 15. | 124-1108 | [2] | CLIP | |
| 16. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 17. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 18. | 1P-5767 | [4] | FLANGE-HALF | |
| 19. | 6V-0400 | [4] | FLANGE-HALF | |
| 20. | 7X-2549 M | [4] | BOLT (M12X1.75X100-MM) | |
| 21. | 453-1259 M | [2] | BOLT (M16X2X40-MM) | |
| 22. | 7Y-4538 | [6] | CLAMP-HALF | |
| 23. | 8T-4139 M | [10] | BOLT (M12X1.75X30-MM) | |
| 24. | 8T-4184 M | [14] | BOLT (M12X1.75X45-MM) | |
| 25. | 8T-4194 M | [10] | BOLT (M12X1.75X50-MM) | |
| 26. | 8T-4223 | [42] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 8T-4648 M | [4] | BOLT (M12X1.75X70-MM) | |
| 28. | 451-2175 | [2] | WASHER-HARD (17.5X30X3.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN (2-PIECE SHOWN) | |||
| L | PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN | |||
| M | METRIC PART | |||
#SEBP49540542
242-6480: LINES GP-AUXILIARY HYDRAULIC
242-6480 LINES GP-AUXILIARY HYDRAULIC -MASS BOOM, MEDIUM PRESSURE
S/N A6F1-UP; A8F1-UP
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-8867 | [2] | CLIP | |
| 2. | 173-7895 | [4] | CLIP | |
| 3. | 179-5260 | [4] | CLIP | |
| 4. | 202-3915 | [1] | PLATE | |
| 5. | 247-9298 | [2] | CLIP AS | |
| 6. | 294-3796 C | [1] | PLATE | |
| 7. | 294-3797 C | [1] | PLATE | |
| 8. | 268-6989 | [1] | TUBE AS | |
| 9. | 268-6992 J | [1] | TUBE GP | |
| 9A. | 268-6995 L | [1] | TUBE AS | |
| 9B. | 268-6998 L | [1] | TUBE AS | |
| 9C. | 7J-9108 L | [1] | SEAL-O-RING | |
| 10. | 268-7001 | [1] | TUBE AS | |
| 11. | 268-7004 J | [1] | TUBE GP | |
| 11A. | L | [1] | TUBE AS | |
| 11B. | 268-7010 L | [1] | TUBE AS | |
| 11C. | 7J-9108 L | [1] | SEAL-O-RING | |
| 12. | 093-1291 C | [2] | CLAMP | |
| 13. | 6V-8398 | [4] | SEAL-O-RING | |
| 14. | 7J-9108 | [2] | SEAL-O-RING | |
| 15. | 7X-2549 M | [2] | BOLT (M12X1.75X100-MM) | |
| 16. | 7Y-4868 | [2] | CLIP | |
| 17. | 8T-4121 C | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4194 CM | [4] | BOLT (M12X1.75X50-MM) | |
| 19. | 8T-4139 M | [12] | BOLT (M12X1.75X30-MM) | |
| 20. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 21. | 8T-4185 CM | [2] | BOLT (M10X1.5X50-MM) | |
| 22. | 8T-4223 C | [22] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 8T-4244 M | [12] | NUT (M12X1.75-THD) | |
| 24. | 294-3795 C | [2] | CLIP AS | |
| 25. | 294-3794 C | [2] | CLIP AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN (2-PIECE SHOWN) | |||
| L | PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN | |||
| M | METRIC PART | |||
#SEBP49540543
242-6483: LINES GP-AUXILIARY HYDRAULIC
242-6483 LINES GP-AUXILIARY HYDRAULIC -HIGH FLOW
S/N A6F1-UP; A8F1-UP
3.9-M (12.8-FT)
Type 1
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
3.9-M (12.8-FT)
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 104-8750 I | [1] | HOSE AS | |
| 2. | 173-7916 | [6] | CLAMP-HALF | |
| 3. | 253-6623 I | [1] | HOSE AS | |
| 4. | 262-3402 | [1] | TUBE AS | |
| 5. | 262-3403 | [1] | TUBE AS | |
| 6. | 277-0954 Y | [2] | VALVE GP-MANUAL | |
| 7. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 8. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 9. | 1P-5767 | [4] | FLANGE-HALF | |
| 10. | 6V-0400 | [4] | FLANGE-HALF | |
| 11. | 7Y-4538 | [6] | CLAMP-HALF | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4139 M | [12] | BOLT (M12X1.75X30-MM) | |
| 14. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 15. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 16. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4223 | [28] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49540544
242-6483: LINES GP-AUXILIARY HYDRAULIC
242-6483 LINES GP-AUXILIARY HYDRAULIC -HIGH FLOW
S/N A6F1-UP; A8F1-UP
3.9-M (12.8-FT)
Type 2
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
3.9-M (12.8-FT)
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 104-8750 I | [1] | HOSE AS | |
| 2. | 173-7916 | [6] | CLAMP-HALF | |
| 3. | 253-6621 I | [1] | HOSE AS | |
| 4. | 262-3402 | [1] | TUBE AS | |
| 5. | 262-3403 | [1] | TUBE AS | |
| 6. | 389-2407 CY | [2] | VALVE GP-MANUAL (AUXILIARY, SHUTOFF, 2-WAY FLOW) | |
| 7. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 8. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 9. | 1P-5767 | [4] | FLANGE-HALF | |
| 10. | 6V-0400 | [4] | FLANGE-HALF | |
| 11. | 7Y-4538 | [6] | CLAMP-HALF | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4139 M | [16] | BOLT (M12X1.75X30-MM) | |
| 14. | 135-4063 H | [2] | FLANGE | |
| 15. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 16. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4223 | [28] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 20. | 1P-3704 H | [2] | SEAL-RECTANGULAR | |
| 21. | 8T-4956 HM | [8] | BOLT (M12X1.75X35-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| H | JAPANESE MARKET ONLY | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49540545
242-6484: LINES GP-AUXILIARY HYDRAULIC
242-6484 LINES GP-AUXILIARY HYDRAULIC -MEDIUM FLOW
S/N A6F1-UP; A8F1-UP
3.9-M (12.8-FT) STICK
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
3.9-M (12.8-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-6760 | [2] | MANIFOLD | |
| 2. | 149-1738 | [12] | CLIP | |
| 3. | 177-8506 I | [2] | HOSE AS | |
| 4. | 187-9977 | [2] | PLATE | |
| 5. | 187-9978 | [3] | SUPPORT AS | |
| 6. | 187-9981 | [3] | SUPPORT AS | |
| 7. | 250-1440 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 7X-3164 | [1] | ADAPTER-SWIVEL | ||
| 8. | 262-3404 | [2] | TUBE AS | |
| 9. | 6V-8398 | [4] | SEAL-O-RING | |
| 10. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4139 M | [24] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4185 M | [4] | BOLT (M10X1.5X50-MM) | |
| 14. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 7X-2543 M | [4] | BOLT (M10X1.5X120-MM) | |
| (USE WITH HIGH PRESSURE AUXILIARY HYDRAULIC LINES) | ||||
| 16. | 8T-4183 M | [12] | BOLT (M12X1.75X40-MM) | |
| (USE WITH HIGH PRESSURE AUXILIARY HYDRAULIC LINES) | ||||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP49540546
242-6487: LINES GP-AUXILIARY HYDRAULIC
242-6487 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N A6F1-UP; A8F1-UP
PART OF 342-1373, 366-6584 OPTION AR-LINKAGE
Type 1
FOR USE WITH 2.92-M (9.6-FT) STICK
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
PART OF 342-1373, 366-6584 OPTION AR-LINKAGE
Type 1
FOR USE WITH 2.92-M (9.6-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-8510 I | [1] | HOSE AS | |
| 2. | 173-7916 | [4] | CLAMP-HALF | |
| 3. | 253-6445 I | [1] | HOSE AS | |
| 4. | 253-6453 | [1] | TUBE AS | |
| 5. | 253-6454 | [1] | TUBE AS | |
| 6. | 277-0954 Y | [2] | VALVE GP-MANUAL | |
| 7. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 8. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 9. | 1P-5767 | [4] | FLANGE-HALF | |
| 10. | 6V-0400 | [4] | FLANGE-HALF | |
| 11. | 7Y-4538 | [4] | CLAMP-HALF | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 14. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 15. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 16. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49540547
242-6487: LINES GP-AUXILIARY HYDRAULIC
242-6487 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N A6F1-UP; A8F1-UP
PART OF 342-1373, 366-6584 OPTION AR-LINKAGE
Type 2
FOR USE WITH 2.92-M (9.6-FT) STICK
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
PART OF 342-1373, 366-6584 OPTION AR-LINKAGE
Type 2
FOR USE WITH 2.92-M (9.6-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-8510 I | [1] | HOSE AS | |
| 2. | 173-7916 | [4] | CLAMP-HALF | |
| 3. | 253-6445 I | [1] | HOSE AS | |
| 4. | 253-6453 | [1] | TUBE AS | |
| 5. | 253-6454 | [1] | TUBE AS | |
| 6. | 389-2407 CY | [2] | VALVE GP-MANUAL (AUXILIARY, SHUTOFF, 2-WAY FLOW) | |
| 7. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 8. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 9. | 1P-5767 | [4] | FLANGE-HALF | |
| 10. | 6V-0400 | [4] | FLANGE-HALF | |
| 11. | 7Y-4538 | [4] | CLAMP-HALF | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4139 M | [12] | BOLT (M12X1.75X30-MM) | |
| 15. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 16. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 20. | 135-4063 J | [2] | FLANGE | |
| 21. | 1P-3704 J | [2] | SEAL-RECTANGULAR | |
| 22. | 8T-4956 JM | [8] | BOLT (M12X1.75X35-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | FOR JAPANESE MARKET ONLY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49540548
242-6488: LINES GP-AUXILIARY HYDRAULIC
242-6488 LINES GP-AUXILIARY HYDRAULIC -MEDIUM FLOW
S/N A6F1-UP; A8F1-UP
FOR USE WITH 2.9-M (9.5-FT) STICK
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
FOR USE WITH 2.9-M (9.5-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-6760 | [2] | MANIFOLD | |
| 2. | 149-1738 | [8] | CLIP | |
| 3. | 177-8572 I | [2] | HOSE AS | |
| 4. | 187-9977 | [2] | PLATE | |
| 5. | 187-9978 | [2] | SUPPORT AS | |
| 6. | 187-9981 | [2] | SUPPORT AS | |
| 7. | 250-1440 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 7X-3164 | [1] | ADAPTER-SWIVEL | ||
| 8. | 253-6455 | [2] | TUBE AS | |
| 9. | 6V-8398 | [4] | SEAL-O-RING | |
| 10. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4139 M | [16] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4185 M | [4] | BOLT (M10X1.5X50-MM) | |
| 14. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 7X-2543 M | [4] | BOLT (M10X1.5X120-MM) | |
| (USED WITH AUX HYD (MED PRESS.) LINES | ||||
| 16. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
| (USED WITH AUX HYD (MED PRESS.) LINES | ||||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP49540549
242-6492: LINES GP-AUXILIARY HYDRAULIC
242-6492 LINES GP-AUXILIARY HYDRAULIC
S/N A6F1-UP; A8F1-UP
MEDIUM PRESSURE
FOR USE WITH 2.4 TO 2.5-M (7.9 TO 8.2-FT) STICK
AN ATTACHMENT
S/N A6F1-UP; A8F1-UP
MEDIUM PRESSURE
FOR USE WITH 2.4 TO 2.5-M (7.9 TO 8.2-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-6760 | [2] | MANIFOLD | |
| 2. | 149-1738 | [4] | CLIP | |
| 3. | 187-9977 | [2] | PLATE | |
| 4. | 187-9978 | [1] | SUPPORT AS | |
| 5. | 187-9981 | [1] | SUPPORT AS | |
| 6. | 382-7079 I | [2] | HOSE AS | |
| 7. | 250-1440 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 7X-3164 | [1] | ADAPTER-SWIVEL | ||
| 8. | 253-6685 | [2] | TUBE AS | |
| 9. | 6V-8398 | [4] | SEAL-O-RING | |
| 10. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4185 M | [4] | BOLT (M10X1.5X50-MM) | |
| 15. | 197-2362 J | [2] | PLATE | |
| 16. | 7X-2543 JM | [4] | BOLT (M10X1.5X120-MM) | |
| 17. | 8T-4183 JM | [8] | BOLT (M12X1.75X40-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | OPTIONAL DESIGN | |||
| M | METRIC PART | |||
Information:
HYDRAULIC SYSTEM
LINES GP-AUXILIARY
Specifications
Auxiliary Hydraulic Lines - Right Boom for Medium Pressure
320D and 323D Excavators Machine System Specifications
320D and 323D Excavators Machine System Specifications
Auxiliary Hydraulic Lines - Mass Boom for Medium Pressure
320D and 323D Excavators Machine System Specifications
320D and 323D Excavators Machine System Specifications
Auxiliary Hydraulic Lines - 2.92 m (9.580 ft) Stick for Medium Flow
320D and 323D Excavators Machine System Specifications
320D and 323D Excavators Machine System Specifications
Auxiliary Hydraulic Lines - Mass Boom with Quick Coupler
320D and 323D Excavators Machine System Specifications
320D and 323D Excavators Machine System Specifications
Auxiliary Hydraulic Lines - 3.9 m (12.80 ft) Stick with Quick Coupler
320D and 323D Excavators Machine System Specifications
320D and 323D Excavators Machine System Specifications
Troubleshooting
MID 039 - CID 1522 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1522 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1522 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1523 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1523 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1523 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
