AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

300-7367 LINES GP-REAR ATTACHMENT S/N KJL1-UP; SKL1-UP PART OF 296-7751 HYDRAULIC AR-4 VALVE AN ATTACHMENT D6T


HYDRAULIC SYSTEM
LINES GP-REAR
LINES GP-RIPPER
LINES GP-CYLINDER
LINES GP-WINCH
MANIFOLD GP

TRACK-TYPE TRACTOR D6T TRACK-TYPE TRACTOR KJL
 D6T TRACK-TYPE TRACTOR XW, LGP Differential Steering KJL00001-UP (MACHINE) POWERED BY C9 Engine SEBP4961 D6T KJL   (2007)

HYDRAULIC SYSTEM

LINES GP-REAR
LINES GP-REAR ATTACHMENT
298-6497 LINES GP-REAR ATTACHMENT
LINES GP-REAR ATTACHMENT
300-7367 LINES GP-REAR ATTACHMENT
 

#SEBP49610720
 

300-7367: LINES GP-REAR ATTACHMENT

300-7367 LINES GP-REAR ATTACHMENT
S/N KJL1-UP; SKL1-UP
PART OF 296-7751 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
i03788573 SEBP4961
3007367 LINES GP-REAR ATTACHMENT Parts scheme 3007367 LINES GP-REAR ATTACHMENT Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6772 B [6] STRAP-CABLE  
2. 101-3129 M [1] STUD (M10X1.5-THD)  
3. 204-9218 I [1] HOSE AS  
4. 226-3506 I [1] HOSE AS  
5. 250-8492 [1] HARNESS AS-SOLENOID (PITCH)  
  9X-3402 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  9G-3695 [1] PLUG-SEAL  
  114-8843 E SLEEVE-PLASTIC (60-CM)  
6. 272-0257 I [1] HOSE AS  
7. 272-6240 [1] HOSE AS  
8. 272-6241 [1] HOSE AS  
9. 283-2454 I [1] HOSE AS  
10. 295-5516 I [1] HOSE AS  
11. 295-5521 [1] BRACKET AS  
12. 298-6493 I [1] HOSE AS  
13. 298-6494 I [1] HOSE AS  
14. 298-6495 I [1] HOSE AS  
15. 298-6496 I [1] HOSE AS  
16. 298-6499 [1] HOSE AS  
17. 299-8938 I [1] HOSE AS  
18. 300-7369 [1] HOSE AS  
19. 300-7370 [1] PLATE AS  
20. 312-5763 [1] BRACKET AS  
21. 148-8316 [1] CONNECTOR AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
22. 148-8325 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
23. 148-8326 [1] CONNECTOR AS  
  3J-7354 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9872 [1] CONNECTOR  
24. 148-8351 [1] ELBOW AS  
  4J-5477 [1] SEAL-O-RING  
  6V-9849 [1] ELBOW  
25. 148-8367 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
26. 148-8368 [4] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8627 [1] ELBOW  
27. 148-8369 [3] ELBOW AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
28. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
29. 148-8433 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
30. 148-8435 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  6V-8781 [1] TEE  
31. 4J-0520 [4] SEAL-O-RING  
32. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
33. 5P-7466 [2] CLIP (SLOT)  
34. 5P-7467 [2] CLIP (TAB)  
35. 5P-8112 [2] GROMMET  
36. 6D-4246 [6] CLIP (LOOP)  
37. 7G-3832 [2] GROMMET  
38. 7G-3833 [2] CLIP (TAB)  
39. 7G-3834 [2] CLIP (SLOT)  
40. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
41. 8S-0948 [1] CLIP  
42. 8T-0722 M [1] BOLT-LOCKING (M10X1.5X30-MM)  
43. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4133 M [3] NUT (M10X1.5-THD)  
45. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
46. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
47. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
48. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49610721
 

235-8180: LINES GP-RIPPER

235-8180 LINES GP-RIPPER
S/N 1EH1-UP
PART OF 224-4449, 227-8797 RIPPER AR
AN ATTACHMENT
i02406097 SEBP4961
2358180 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-5888 [1] SPACER (0.42X0.67X0.63-IN THK)  
2. 9M-2904 [8] CLAMP-HOSE  
3. 112-4368 [2] SHIELD  
4. 130-1977 [8] SHIELD  
5. 130-9192 B [4] GROMMET  
6. 208-6726 I [1] HOSE AS  
7. 208-6727 [1] SHIELD  
8. 208-9699 I [1] HOSE AS  
9. 3G-8047 [1] GROMMET  
10. 3G-8054 [1] CLIP (TAB)  
11. 3G-8057 [1] CLIP (SLOT)  
12. 4J-5267 [4] SEAL-O-RING  
13. 5P-7464 [1] CLIP (SLOT)  
14. 5P-7465 [1] CLIP (TAB)  
15. 6V-1249 [1] GROMMET (22-MM ID)  
16. 7X-7729 [4] WASHER (11X25X3-MM THK)  
17. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4133 M [3] NUT (M10X1.5-THD)  
19. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
20. 8T-4186 M [10] BOLT (M10X1.5X40-MM)  
21. 381-8734 [4] GROMMET  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49610722
 

269-2079: LINES GP-RIPPER

269-2079 LINES GP-RIPPER
S/N KJL1-UP; SKL1-UP
PART OF 280-1476 CONTROL AR-HYDRAULIC IMPLEMENT
AN ATTACHMENT
i02700118 SEBP4961
2692079 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-6887 [1] MANIFOLD  
2. 226-8206 [1] GUARD  
3. 270-3439 I [1] HOSE AS  
4. 270-3440 I [1] HOSE AS  
5. 4J-0520 [2] SEAL-O-RING  
6. 4J-5267 [2] SEAL-O-RING  
7. 7G-3832 [1] GROMMET  
8. 7G-3833 [1] CLIP (TAB)  
9. 7G-3834 [1] CLIP (SLOT)  
10. 8C-3205 [8] FLANGE-HALF  
11. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
13. 8T-4196 M [16] BOLT (M10X1.5X35-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49610723
 

223-3989: LINES GP-TILT CYLINDER

223-3989 LINES GP-TILT CYLINDER
S/N B8B1-UP
PART OF 222-8755, 222-8756 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i02796722 SEBP4961
2233989 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3Y-5405 [2] RUBBER  
2. 145-5181 [4] SPACER (13.5X25X12-MM THK)  
3. 213-2282 [2] GUARD  
4. 168-2599 I [1] HOSE AS  
5. 4J-5267 [4] SEAL-O-RING  
6. 4T-1563 [1] GUARD AS  
7. 308-6032 CI [1] HOSE AS  
8. 308-6033 CI [1] HOSE AS  
9. 6V-8398 [4] SEAL-O-RING  
10. 6V-8981 [2] ELBOW  
11. 6V-9169 [2] NUT (13/16-16-THD)  
12. 7T-6934 I [1] HOSE AS  
13. 8C-3205 [4] FLANGE-HALF  
14. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
16. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
17. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49610724
 

223-3994: LINES GP-TILT CYLINDER

223-3994 LINES GP-TILT CYLINDER
S/N B9B756-UP
PART OF 222-8757, 222-8758 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i02796947 SEBP4961
2233994 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3Y-5405 [2] RUBBER  
2. 145-5181 [4] SPACER (13.5X25X12-MM THK)  
3. 168-2599 I [1] HOSE AS  
4. 213-2282 [2] GUARD  
5. 4J-5267 [4] SEAL-O-RING  
6. 4T-1563 [1] GUARD AS  
7. 6V-8398 [4] SEAL-O-RING  
8. 6V-8981 [2] ELBOW  
9. 6V-9169 [2] NUT (13/16-16-THD)  
10. 308-6028 CI [1] HOSE AS  
11. 308-6029 CI [1] HOSE AS  
12. 7T-6934 I [1] HOSE AS  
13. 8C-3205 [4] FLANGE-HALF  
14. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
16. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
17. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49610725
 

247-5709: LINES GP-TILT CYLINDER

247-5709 LINES GP-TILT CYLINDER
S/N A6B1-UP; B8B1-UP
PART OF 257-8308, 257-8309 BULLDOZER AR-ANGLING
AN ATTACHMENT
i02421888 SEBP4961
2475709 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-6588 [2] HEAD-ADAPTER  
2. 4Z-9463 I [2] HOSE AS  
3. 4Z-9464 I [2] HOSE AS  
4. 308-6030 I [1] HOSE AS  
5. 308-6031 I [1] HOSE AS  
6. 5S-8709 [1] GUARD-CENTER  
7. 5S-8765 [1] GUARD (RH)  
8. 5S-8766 [1] GUARD (LH)  
9. 6Y-0596 [1] GUARD AS (LH)  
10. 6Y-0597 [1] GUARD AS (RH)  
11. 245-4230 [1] BRACKET AS (RH)  
12. 245-4231 [1] BRACKET AS (LH)  
13. 5S-8712 [6] BLOCK  
14. 251-9840 [2] TUBE AS  
15. 251-9841 [1] TUBE AS  
16. 3G-8047 [1] GROMMET  
17. 3G-8054 [1] CLIP (TAB)  
18. 3G-8057 [1] CLIP (SLOT)  
19. 3K-0360 [2] SEAL-O-RING  
20. 4J-5267 [12] SEAL-O-RING  
21. 5P-7464 [2] CLIP (SLOT)  
22. 5P-7465 [2] CLIP (TAB)  
23. 6V-1249 [2] GROMMET (22-MM ID)  
24. 6V-8398 [2] SEAL-O-RING  
25. 6V-8625 [2] ELBOW  
26. 8C-3205 [20] FLANGE-HALF  
27. 8T-4121 [48] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
29. 8T-4182 M [6] BOLT (M10X1.5X45-MM)  
30. 8T-4195 M [42] BOLT (M10X1.5X30-MM)  
31. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49610726
 

269-2077: LINES GP-TILT CYLINDER

269-2077 LINES GP-TILT CYLINDER
S/N KJL1-UP; SKL1-UP
PART OF 269-2050 HYDRAULIC AR-2 VALVE
i02694509 SEBP4961
2692077 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-5888 [2] SPACER (0.42X0.67X0.63-IN THK)  
2. 226-7810 [1] TUBE AS  
3. 226-7906 [1] MANIFOLD  
4. 226-7924 [1] TUBE AS  
5. 270-3473 I [1] HOSE AS  
6. 270-3474 I [1] HOSE AS  
7. 1P-3703 [2] SEAL-RECTANGULAR  
8. 3G-8047 [4] GROMMET  
9. 3G-8054 [4] CLIP (TAB)  
10. 3G-8057 [4] CLIP (SLOT)  
11. 3H-8683 [4] CLIP  
12. 4J-0520 [2] SEAL-O-RING  
13. 4J-5267 [2] SEAL-O-RING  
14. 5H-4018 [2] COVER  
15. 5P-1075 [29] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 6V-8398 [2] SEAL-O-RING  
17. 8C-3205 [4] FLANGE-HALF  
18. 8T-1887 [2] CLIP (SLOT)  
19. 8T-1888 [2] CLIP (TAB)  
20. 8T-4133 M [6] NUT (M10X1.5-THD)  
21. 8T-4182 M [10] BOLT (M10X1.5X45-MM)  
22. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
23. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
24. 8T-4196 M [9] BOLT (M10X1.5X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49610727
 

288-8474: LINES GP-TILT CYLINDER

288-8474 LINES GP-TILT CYLINDER
S/N MMX1-UP
PART OF 288-8435, 288-8436 BULLDOZER AR-ANGLING
AN ATTACHMENT
i02718917 SEBP4961
2888474 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-6588 [2] HEAD-ADAPTER  
2. 5S-8709 [1] GUARD-CENTER  
3. 5S-8712 [6] BLOCK  
4. 6Y-0596 [1] GUARD AS (LH)  
5. 6Y-0597 [1] GUARD AS (RH)  
6. 245-4230 [1] BRACKET AS (RH)  
7. 245-4231 [1] BRACKET AS (LH)  
8. 288-8472 [1] GUARD (LH)  
9. 288-8473 [1] GUARD (RH)  
10. 288-8480 [2] TUBE AS  
11. 288-8481 [1] TUBE AS  
12. 308-0486 I [2] HOSE AS  
13. 308-0487 I [2] HOSE AS  
14. 308-6022 I [1] HOSE AS  
15. 308-6023 I [1] HOSE AS  
16. 3G-8047 [1] GROMMET  
17. 3G-8054 [1] CLIP (TAB)  
18. 3G-8057 [1] CLIP (SLOT)  
19. 3K-0360 [2] SEAL-O-RING  
20. 4J-5267 [12] SEAL-O-RING  
21. 5P-7464 [2] CLIP (SLOT)  
22. 5P-7465 [2] CLIP (TAB)  
23. 6V-1249 [2] GROMMET (22-MM ID)  
24. 6V-8398 [2] SEAL-O-RING  
25. 6V-8625 [2] ELBOW  
26. 8C-3205 [20] FLANGE-HALF  
27. 8T-4121 [48] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
29. 8T-4182 M [6] BOLT (M10X1.5X45-MM)  
30. 8T-4195 M [42] BOLT (M10X1.5X30-MM)  
31. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49610728
 

269-2081: LINES GP-WINCH

269-2081 LINES GP-WINCH
S/N KJL1-UP; SKL1-UP
PART OF 280-1478 CONTROL AR-HYDRAULIC IMPLEMENT
AN ATTACHMENT
i02700297 SEBP4961
2692081 LINES GP-WINCH Parts scheme 2692081 LINES GP-WINCH Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-9233 [2] SPACER (0.563X1X1-IN THK)  
2. 7K-1181 [1] STRAP-CABLE  
3. 170-4891 [1] HARNESS AS-SOLENOID (WINCH, REAR)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
4. 175-3514 [1] SPACER  
5. 201-0950 Y [1] VALVE GP-SOLENOID (MANUAL LOW SPEED LOCK)  
6. 219-2893 I [1] HOSE AS  
7. 234-2869 [1] MANIFOLD  
8. 234-3425 [1] GUARD  
9. 239-5235 [1] BRACKET AS  
10. 260-6479 [1] BRACKET AS  
11. 270-3451 I [1] HOSE AS  
12. 270-3476 I [1] HOSE AS  
13. 270-3481 I [1] HOSE AS  
14. 148-8336 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
15. 148-8340 [1] CONNECTOR AS  
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
16. 148-8411 [1] PLUG AS  
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
17. 150-4043 [1] CONNECTOR AS  
  6V-9873 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
18. 155-3624 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
19. 173-3993 [1] PLUG AS  
  9S-8001 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
20. 183-3406 [1] PLUG AS  
  9S-4191 [1] PLUG (9/16-18-THD)  
  6V-5049 [1] SEAL-O-RING  
21. 1P-3702 [2] SEAL-RECTANGULAR  
22. 1P-3703 [4] SEAL-RECTANGULAR  
23. 1S-0994 [2] CLIP (LOOP)  
24. 4J-0520 [1] SEAL-O-RING  
25. 4P-7581 [1] CLIP (LADDER)  
26. 5P-0047 [2] COVER  
27. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 6V-0400 [8] FLANGE-HALF  
29. 7G-3832 [1] GROMMET  
30. 7G-3834 [1] CLIP (SLOT)  
31. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
33. 8T-4184 M [16] BOLT (M12X1.75X45-MM)  
34. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
35. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
37. 8T-6466 M [6] BOLT (M10X1.5X60-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49610729
 

226-4751: MANIFOLD GP-CONTROL

226-4751 MANIFOLD GP-CONTROL -IMPLEMENT PILOT PRESSURE-IMPLEMENT
S/N KJL1-UP; SKL1-UP
PART OF 269-2078 LINES GP-PILOT
i02407505 SEBP4961
2264751 MANIFOLD GP-CONTROL Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 158-9956 Y [1] VALVE GP-CHECK (PILOT PRESSURE SUPPLY)  
2. 170-3357 Y [1] VALVE GP-PRESSURE REDUCING (IMPLEMENT PILOT OIL)  
3. 225-8026 Y [1] VALVE GP-RELIEF (IMPLEMENT PILOT OIL)  
4. 201-0950 Y [1] VALVE GP-SOLENOID (HYDRAULIC LOCKOUT)  
5. 6E-5066 [1] SCREEN (HYDRAULIC)(IMPLEMENT PILOT OIL)  
6. 9S-8002 [1] PLUG (7/16-20-THD)  
7. 9S-8004 [1] PLUG (9/16-18-THD)  
8. 3J-7354 [1] SEAL-O-RING  
9. 3J-1907 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D6T :

LINES GP-REAR ATTACHMENT
298-6497 LINES GP-REAR ATTACHMENT
LINES GP-PUMP
269-2074 LINES GP-PUMP
LINES GP-PILOT
269-2089 LINES GP-PILOT
LINES GP-PILOT
269-2082 LINES GP-PILOT
LINES GP-PILOT
269-2080 LINES GP-PILOT
LINES GP-PILOT
269-2078 LINES GP-PILOT
LINES GP-PILOT
269-2078 LINES GP-PILOT
LINES GP-LIFT CYLINDER
269-2076 LINES GP-LIFT CYLINDER
LINES GP-RIPPER
235-8180 LINES GP-RIPPER
LINES GP-RIPPER
269-2079 LINES GP-RIPPER
LINES GP-TILT CYLINDER
223-3989 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
223-3994 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
247-5709 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
269-2077 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
288-8474 LINES GP-TILT CYLINDER
LINES GP-WINCH
269-2081 LINES GP-WINCH
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.