AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

507-2857 EDGE GP-BIT & CUTTING S/N WFH1-UP EXTENDED WEAR FOR USE WITH SEMI-UNIVERSAL BLADES FIELD INSTALLATION D6T


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
WINCH GP
HYDRAULIC SYSTEM
LINES GP-RIPPER
ELECTRICAL AND STARTING SYSTEM
RECEIVER GP

TRACK-TYPE TRACTOR D6T TRACK-TYPE TRACTOR DJG
 D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT Differential Steering DJG00001-UP (MACHINE) POWERED BY C9 Engine SEBP4962 D6T DJG   (2007)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
EDGE GP-BIT & CUTTING
507-2855 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2856 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2857 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2858 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2957 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2958 EDGE GP-BIT & CUTTING
 

#SEBP49621030
 

507-2857: EDGE GP-BIT & CUTTING

507-2857 EDGE GP-BIT & CUTTING
S/N WFH1-UP
EXTENDED WEAR
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
i06849595 SEBP4962
5072857 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-3840 [2] EDGE-CUTTING  
2. 9W-1875 [1] BIT-END (RH)  
3. 9W-1876 [1] BIT-END (LH)  
4. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP49621031
 

507-2858: EDGE GP-BIT & CUTTING

507-2858 EDGE GP-BIT & CUTTING
S/N WFH1-UP
FIELD INSTALLATION
i06849584 SEBP4962
5072858 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 433-9637 [1] BIT-END (RH)  
2. 433-9639 [1] BIT-END (LH)  
3. 433-9640 [2] EDGE-CUTTING  
4. 2J-3506 [34] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [34] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [34] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP49621032
 

507-2957: EDGE GP-BIT & CUTTING

507-2957 EDGE GP-BIT & CUTTING
S/N WFH1-UP
UTILITY
FIELD INSTALLATION
i06849583 SEBP4962
5072957 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2985 [4] EDGE-CUTTING  
2. 122-8617 [1] BIT-END (LH)  
3. 122-8618 [1] BIT-END (RH)  
4. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP49621033
 

507-2958: EDGE GP-BIT & CUTTING

507-2958 EDGE GP-BIT & CUTTING
S/N WFH1-UP
GENERAL DUTY
FIELD INSTALLATION
i06849605 SEBP4962
5072958 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2985 [4] EDGE-CUTTING  
2. 6Y-4410 [1] BIT-END (LH)  
3. 6Y-4411 [1] BIT-END (RH)  
4. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP49621034
 

507-2959: EDGE GP-BIT & CUTTING

507-2959 EDGE GP-BIT & CUTTING
S/N WFH1-UP
EXTENDED WEAR
FIELD INSTALLATION
i06849601 SEBP4962
5072959 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2985 [4] EDGE-CUTTING  
2. 9W-1875 [1] BIT-END (RH)  
3. 9W-1876 [1] BIT-END (LH)  
4. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP49621035
 

521-8463: EDGE GP-BIT & CUTTING

521-8463 EDGE GP-BIT & CUTTING
S/N WFH1-UP
EXTENDED WEAR, ABRASIVE RESISTANT MATERIAL
FIELD INSTALLATION
i06849599 SEBP4962
5218463 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 283-1027 [1] BIT-END (RH)  
2. 283-1028 [1] BIT-END (LH)  
3. 283-1029 [4] EDGE-CUTTING  
4. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP49621036
 

444-1165: FAIRLEAD GP-WINCH

444-1165 FAIRLEAD GP-WINCH
S/N DJG1-UP; WCG1-UP; WFH1-UP
3-ROLLER
FOR USE WITH RETROFIT
FIELD INSTALLATION
i05893155 SEBP4962
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  118-7211 [1] FAIRLEAD AS  
  3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
  3K-3963 [6] CUP-BEARING  
  5M-6667 [3] LOCKNUT (1-1/2-12-THD)  
  8T-9383 [3] BOLT (1/2-13X0.75-IN)  
  118-5803 [6] GUARD AS  
  118-6298 [1] BOLT  
  118-6604 [1] SHAFT AS  
  118-6648 [2] SHAFT AS  
  118-6649 [2] ROLLER  
  118-6935 [1] FRAME AS  
  119-1623 [1] WASHER  
  119-2174 [6] BEARING  
  119-2186 [4] RETAINER  
  119-2211 [3] WASHER  
  120-7536 [3] SPACER  
  120-7634 [4] RACE  
  123-4410 [6] SPACER (2X2.75X0.125-IN THK)  
  174-4770 [1] ROLLER GP-TRACK (KIT)  
  3B-8489 FITTING-GREASE (1/8-27 PTF)  
  3K-3963 [2] CUP-BEARING  
  5M-6667 [1] LOCKNUT (1-1/2-12-THD)  
  8T-9383 [1] BOLT (1/2-13X0.75-IN)  
  118-5803 [2] GUARD AS  
  118-6604 [1] SHAFT AS  
  119-2174 [2] BEARING  
  119-2211 [1] WASHER  
  120-7536 [1] SPACER  
 

#SEBP49621037
 

384-0461: KIT-RETROFIT

384-0461 KIT-RETROFIT -RIPPER
S/N DJG1-UP; WCG1-UP; WFH1-UP
FOR USE WITH FUEL TANK GUARD
FIELD INSTALLATION
i04893450 SEBP4962
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  369-2637 [1] MANIFOLD GP-VALVE  
  195-2628 [1] VALVE-NEEDLE  
  360-1748 H [1] VALVE GP-MODULATING  
   
  366-8434 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  6V-9969 [1] COUPLING AS-PERMANENT  
  8T-3731 [1] COUPLING AS-PERMANENT  
  323-6157 [2] COUPLING AS-PERMANENT  
  323-6173 [2] COUPLING AS-PERMANENT  
  371-4293 [1] GUARD AS-FUEL TANK  
   
  7X-2534 M [2] BOLT (M6X1X50-MM)  
  8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  8T-4184 M [2] BOLT (M12X1.75X45-MM)  
  8T-4192 M [2] BOLT (M12X1.75X25-MM)  
  8T-4195 M [4] BOLT (M10X1.5X30-MM)  
  8T-4196 M [1] BOLT (M10X1.5X35-MM)  
  4D-9517 [1] CLIP  
  6K-8178 [1] CLIP (LOOP)  
  7G-3833 [1] CLIP (TAB)  
  7G-3834 [1] CLIP (SLOT)  
  275-1442 [1] CLIP (TAB)  
  275-1443 [1] CLIP (SLOT)  
  6V-8637 [3] CONNECTOR  
  8T-0076 [1] CONNECTOR  
  092-3635 [1] CONNECTOR  
  124-2111 [1] COUPLING-PERMANENT  
  124-2158 [1] COUPLING-PERMANENT  
  6V-8724 [2] ELBOW  
  8T-0119 [1] ELBOW  
  9X-2134 [1] ELBOW  
  7G-3832 [1] GROMMET  
  333-4609 [1] GROMMET  
  9S-8004 [1] PLUG (9/16-18-THD)  
  9S-8006 [1] PLUG (7/8-14-THD)  
  2M-9780 [2] SEAL-O-RING  
  3D-2824 [2] SEAL-O-RING  
  3J-1907 [3] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  3K-0360 [3] SEAL-O-RING  
  4J-0520 [2] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8397 [5] SEAL-O-RING  
  6V-9746 [2] SEAL-O-RING  
  7X-7729 [4] WASHER (11X25X3-MM THK)  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  053-4679 [1] WASHER (13.5X44.45X10-MM THK)  
  5P-1076 [3] WASHER-HARD (13.5X30X4-MM THK)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  363-5981 H [1] KIT-SEAL  
    (INCLUDES O-RINGS & BACK-UP RINGS)
  H   KIT MARKED H SERVICES PART(S) MARKED H
  M   METRIC PART
 

#SEBP49621038
 

386-2387: KIT-RETROFIT

386-2387 KIT-RETROFIT -RIPPER
S/N DJG1-UP; WCG1-UP; WFH1-UP
CANNOT BE USED WITH FUEL TANK GUARD
FIELD INSTALLATION
i04893448 SEBP4962
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  346-0493 Y [1] VALVE GP-COUNTERBALANCE  
   
  369-2637 [1] MANIFOLD GP-VALVE  
  195-2628 [1] VALVE-NEEDLE  
   
  366-8434 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  6V-9969 [2] COUPLING AS-PERMANENT  
  8T-3731 [2] COUPLING AS-PERMANENT  
  323-6157 [2] COUPLING AS-PERMANENT  
  323-6173 [2] COUPLING AS-PERMANENT  
   
  7X-2534 M [2] BOLT (M6X1X50-MM)  
  8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  8T-4184 M [2] BOLT (M12X1.75X45-MM)  
  8T-4192 M [2] BOLT (M12X1.75X25-MM)  
  8T-4195 M [4] BOLT (M10X1.5X30-MM)  
  8T-4196 M [1] BOLT (M10X1.5X35-MM)  
  4D-9517 [1] CLIP  
  6K-8178 [1] CLIP (LOOP)  
  7G-3833 [1] CLIP (TAB)  
  7G-3834 [1] CLIP (SLOT)  
  275-1442 [1] CLIP (TAB)  
  275-1443 [1] CLIP (SLOT)  
  6V-8637 [2] CONNECTOR  
  6V-8647 [1] CONNECTOR  
  8T-0076 [1] CONNECTOR  
  092-3635 [1] CONNECTOR  
  124-2111 [1] COUPLING-PERMANENT  
  124-2158 [1] COUPLING-PERMANENT  
  6V-8724 [2] ELBOW  
  8T-0119 [1] ELBOW  
  9X-2134 [1] ELBOW  
  7G-3832 [1] GROMMET  
  333-4609 [1] GROMMET  
  370-3803 [1] GUARD  
  9S-8004 [1] PLUG (9/16-18-THD)  
  9S-8006 [1] PLUG (7/8-14-THD)  
  2M-9780 [2] SEAL-O-RING  
  3D-2824 [2] SEAL-O-RING  
  3J-1907 [3] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  3K-0360 [3] SEAL-O-RING  
  4J-0520 [2] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8397 [5] SEAL-O-RING  
  6V-9746 [2] SEAL-O-RING  
  7X-7729 [4] WASHER (11X25X3-MM THK)  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  053-4679 [1] WASHER (13.5X44.45X10-MM THK)  
  5P-1076 [3] WASHER-HARD (13.5X30X4-MM THK)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49621039
 

245-4139: MOUNTING GP-MAST

245-4139 MOUNTING GP-MAST -GRADE CONTROL
S/N DJG1-UP; WCG1-UP; WFH1-UP
PART OF 281-1637, 281-1638 MACHINE AR
AN ATTACHMENT
i02413380 SEBP4962
2454139 MOUNTING GP-MAST Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 279-9894 [1] PLATE AS  
2. 279-9900 [2] BRACKET AS  
3. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
4. 8T-4184 M [12] BOLT (M12X1.75X45-MM)  
5. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D6T :

EDGE GP-BIT & CUTTING
507-2856 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2855 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
223-3290 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
219-4270 EDGE GP-BIT & CUTTING
CONTROL GP-WINCH
303-1222 CONTROL GP-WINCH
BLADE GP-ANGLING
351-4683 BLADE GP-ANGLING
BLADE GP-ANGLING
351-4682 BLADE GP-ANGLING
BLADE GP-ANGLING
351-4681 BLADE GP-ANGLING
EDGE GP-BIT & CUTTING
507-2858 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2957 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2958 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2959 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
521-8463 EDGE GP-BIT & CUTTING
444-1165 FAIRLEAD GP-WINCH
384-0461 KIT-RETROFIT
386-2387 KIT-RETROFIT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.