286-0134 DISPLAY GP-MONITOR -CD700 S/N B9D1-UP PART OF 292-7975 DISPLAY AR-MONITOR 140M MOTOR GRADER

OPERATOR STATION

MONITOR GP

0. 286-0134 DISPLAY GP
1. 286-9124 DISPLAY GP
2. 292-0309 DISPLAY GP

DOOR GP

3. 294-1033 DOOR GP-CA
4. 294-1034 DOOR GP-CA
5. 294-1035 DOOR GP-CA
6. 310-2056 DOOR GP-CA
7. 357-9199 DOOR GP-CA
8. 357-9200 DOOR GP-CA

DUCT GP

9. 244-2701 DUCT & FIL
0. INFORMATION

MOTOR GRADER 140M MOTOR GRADER B9D
140M Motor Grader B9D00001-UP (MACHINE) SEBP4976 140M B9D (2007)

OPERATOR STATION

MONITOR GP

361-3145 DISPLAY GP-CAMERA

447-2229 DISPLAY GP-CAMERA

286-0134 DISPLAY GP-MONITOR

286-9124 DISPLAY GP-MONITOR

292-0309 DISPLAY GP-MONITOR

#SEBP49761570

286-0134: DISPLAY GP-MONITOR

DISPLAY GP-MONITOR

286-0134 DISPLAY GP-MONITOR -CD700
S/N B9D1-UP
PART OF 292-7975 DISPLAY AR-MONITOR

i02618796 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
244-1716	[1]	DISPLAY GP-MONITOR (CD700C)

283-4426	[1]	CARD AS-MEMORY (FLASH)

194-8031	[1]	ADAPTER (COMPACT)
8T-4171 M	[4]	BOLT (M6X1X12-MM)
292-0311	[1]	CASE-CARRYING
	[1]	COMPACT DISC (ACCUGRADE V10.71)
8T-0285 M	[6]	SCREW-MACHINE (M4X0.7X12-MM)
9X-8256	[4]	WASHER (6.6X12X2-MM THK)
096-6166	[6]	WASHER-HARD (4.5X9X1-MM THK)
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP49761571

286-9124: DISPLAY GP-MONITOR

DISPLAY GP-MONITOR

286-9124 DISPLAY GP-MONITOR -LIGHT BAR
S/N B9D1-UP
PART OF 292-7975, 331-7530 DISPLAY AR-MONITOR

i02618799 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-5009	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
2.	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
3.	8T-8737	[1]	PLUG-SEAL

#SEBP49761572

292-0309: DISPLAY GP-MONITOR

DISPLAY GP-MONITOR

292-0309 DISPLAY GP-MONITOR -CD610
S/N B9D1-UP
PART OF 292-7980 DISPLAY AR-MONITOR

i02649296 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7X-2619 M	[6]	BOLT (M6X1X10-MM)
292-0311	[1]	CASE-CARRYING
283-9530	[1]	DISPLAY GP-MONITOR (CD610)
	[1]	SOFTWARE GP-MONITOR
8T-4205	[6]	WASHER-HARD (7.2X14.5X2-MM THK)
M		METRIC PART

#SEBP49761573

294-1033: DOOR GP-CAB

DOOR GP-CAB

294-1033 DOOR GP-CAB -LH
S/N B9D1-UP
PART OF 254-5399, 365-2969 CAB AR
FIELD REPLACEMENT ORDER @@@@@357-9200@@@@@

i02779648 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-7636	[2]	PIN AS-SPRING
2.	4E-8722	[5]	NUT (RETAINER)
3.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
4.	252-1862 J	[1]	HANDLE AS-PULL
5.	252-1863	[1]	GASKET
6.	261-1731	[1]	BOOT
7.	361-0421	[1]	COVER
8.	269-2890	[1]	CLEVIS
9.	269-2892	[1]	PIN
10.	269-2893	[1]	CLIP
11.	272-1623	[1]	BELLCRANK AS
12.	285-3692	[1]	SPACER-SPECIAL
13.	352-1643	[1]	DOOR AS-CAB (LH)
14.	295-1114 Y	[1]	WIPER GP-WINDOW (DOOR, LH)
15.	295-1200	[2]	HINGE (LH)
16.	295-5648	[1]	PLATE
17.	295-5665	[1]	BRACKET AS
18.	295-6393	[1]	COVER (LH)
19.	328-4984	[1]	LATCH AS-DOOR (LH)
20.	295-6400	[1]	LINKAGE AS (LH)
21.	295-6406	[1]	LATCH AS (LH)
22.	295-6652	[1]	GLASS (DOOR, LH)
23.	296-2991	[1]	BRACKET
24.	296-4040	[1]	STRIKER AS
25.	296-4109	[1]	COVER
26.	296-4924	[1]	HARNESS AS-WINDOW WIPER
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (95-CM)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
27.	297-4169	[1]	GROMMET
28.	299-1021	[1]	LEVER GP-CAB DOOR
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL (DOOR RELEASE)
29.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
30.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
31.	109-5008	[1]	BUMPER-CONICAL
32.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
33.	5C-7261 M	[1]	NUT (M8X1.25-THD)
34.	9X-2125 M	[4]	BOLT-LOCKING (M10X1.5X25-MM)
35.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
36.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
37.	9X-2043 M	[11]	SCREW-TRUSS HEAD (M6X1X14-MM)
38.	9X-2044 M	[6]	SCREW-TRUSS HEAD (M6X1X16-MM)
39.	328-5492 L		SEAL (50-DM)
40.	331-9731 E		SEAL (4-CM)
41.	110-7524	[8]	BUTTON
42.	3S-2093	[3]	STRAP-CABLE
43.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
44.	214-9186	[6]	BUTTON
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	L		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49761574

294-1034: DOOR GP-CAB

DOOR GP-CAB

294-1034 DOOR GP-CAB -RH
S/N B9D1-UP
PART OF 364-1988 OPTION AR-MACHINE
FIELD REPLACEMENT ORDER @@@@@357-9199@@@@@
OPTIONAL FIELD REPLACEMENT ORDER 500-384-4004 SEAL
FOR USE WITH @@@@@238-8758@@@@@
CANNOT BE USED WITH @@@@@294-1035@@@@@

i02879426 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-7636	[2]	PIN AS-SPRING
2.	4E-8722	[5]	NUT (RETAINER)
3.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
4.	252-1862 J	[1]	HANDLE AS-PULL
5.	252-1863	[1]	GASKET
6.	261-1731	[1]	BOOT
7.	361-0421	[1]	COVER
8.	269-2890	[1]	CLEVIS
9.	269-2892	[1]	PIN
10.	269-2893	[1]	CLIP
11.	272-1623	[1]	BELLCRANK AS
12.	285-3692	[1]	SPACER-SPECIAL
13.	294-1032	[1]	DOOR AS (RH)
14.	295-1043	[2]	HINGE (RH)
15.	295-1113 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
16.	295-5648	[1]	PLATE
17.	295-5649	[1]	BRACKET
18.	295-5665	[1]	BRACKET AS
19.	295-6374	[1]	GLASS (DOOR, RH)
20.	295-6390	[1]	COVER
21.	295-6391	[1]	COVER (RH)
22.	328-4985	[1]	LATCH AS-DOOR (RH)
23.	295-6399	[1]	LINKAGE AS (RH)
24.	295-6405	[1]	LATCH AS (RH)
25.	296-4040	[1]	STRIKER AS
26.	296-4924	[1]	HARNESS AS-WINDOW WIPER
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	186-3736	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (95-CM)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
27.	297-4169	[1]	GROMMET
28.	299-1020	[1]	LEVER AS
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL (DOOR RELEASE)
29.	299-1660	[1]	CABLE AS
	2B-1560	[2]	PIN
	3B-4605	[2]	PIN-COTTER
30.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
31.	109-5008	[1]	BUMPER-CONICAL
32.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
33.	5C-7261 M	[1]	NUT (M8X1.25-THD)
34.	9X-2125 M	[4]	BOLT-LOCKING (M10X1.5X25-MM)
35.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
36.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
37.	9X-2043 M	[11]	SCREW-TRUSS HEAD (M6X1X14-MM)
38.	9X-2044 M	[6]	SCREW-TRUSS HEAD (M6X1X16-MM)
39.	328-5492 H		SEAL (50-DM)
40.	110-7524	[8]	BUTTON
41.	331-9731 E		SEAL (4-CM)
42.	3S-2093	[4]	STRAP-CABLE
43.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
44.	214-9186	[6]	BUTTON
	E		ORDER BY THE CENTIMETER
	H		ORDER BY THE DECIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49761575

294-1035: DOOR GP-CAB

DOOR GP-CAB

294-1035 DOOR GP-CAB -RH
S/N B9D1-UP
CANNOT BE USED WITH @@@@@294-1034@@@@@

i02879489 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4E-8722	[5]	NUT (RETAINER)
2.	110-7524	[8]	BUTTON
3.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
4.	268-3533	[1]	LATCH AS (RH)
5.	278-0674	[1]	PLATE
6.	294-1032	[1]	DOOR AS (RH)
7.	295-1043	[2]	HINGE (RH)
8.	295-1113 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
9.	295-6374	[1]	GLASS (DOOR, RH)
10.	295-6391	[1]	COVER (RH)
11.	296-4040	[1]	STRIKER AS
12.	296-4924	[1]	HARNESS AS-WINDOW WIPER
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (95-CM)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
13.	297-3092	[1]	PLATE
14.	297-4169	[1]	GROMMET
15.	298-2019	[1]	PLATE
16.	302-9098	[1]	COVER
17.	114-6658	[5]	WASHER (6.5X17X1-MM THK)
18.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
19.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
20.	9X-2043 M	[13]	SCREW-TRUSS HEAD (M6X1X14-MM)
21.	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
22.	9X-2125 M	[4]	BOLT-LOCKING (M10X1.5X25-MM)
23.	331-9731 E		SEAL (4-CM)
24.	328-5492 J		SEAL (50-DM)
25.	3S-2093	[4]	STRAP-CABLE
26.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
27.	214-9186	[6]	BUTTON
	E		ORDER BY THE CENTIMETER
	J		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49761576

310-2056: DOOR GP-CAB

DOOR GP-CAB

310-2056 DOOR GP-CAB -RH
S/N B9D1-UP
PART OF 364-1989 OPTION AR-MACHINE
FIELD REPLACEMENT ORDER @@@@@357-9199@@@@@
OPTIONAL FIELD REPLACEMENT ORDER 500-384-4004 SEAL

i03942880 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	4E-8722	[5]	NUT (RETAINER)
3.	6V-7636	[2]	PIN AS-SPRING
4.	110-7524	[8]	BUTTON
5.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
6.	214-9186	[6]	BUTTON
7.	252-1862 J	[1]	HANDLE AS-PULL
8.	252-1863	[1]	GASKET
9.	261-1731	[1]	BOOT
10.	361-0421	[1]	COVER
11.	269-2890	[1]	CLEVIS
12.	269-2892	[1]	PIN
13.	269-2893	[1]	CLIP
14.	272-1623	[1]	BELLCRANK AS
15.	285-3692	[1]	SPACER-SPECIAL
16.	294-1032	[1]	DOOR AS (RH)
17.	295-1043	[2]	HINGE (RH)
18.	295-1113 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
19.	295-5648	[1]	PLATE
20.	295-5649	[1]	BRACKET
21.	295-5665	[1]	BRACKET AS
22.	295-6374	[1]	GLASS (DOOR, RH)
23.	295-6390	[1]	COVER
24.	295-6391	[1]	COVER (RH)
25.	295-6399	[1]	LINKAGE AS (RH)
26.	295-6405	[1]	LATCH AS (RH)
27.	296-4040	[1]	STRIKER AS
28.	297-4169	[1]	GROMMET
29.	299-1020	[1]	LEVER AS
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL (DOOR RELEASE)
30.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
31.	328-4985	[1]	LATCH AS-DOOR (RH)
32.	361-2492	[1]	HARNESS AS-WINDOW WIPER (RH)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	7T-0093	[4]	PIN-CONNECTOR (12-GA TO 14-GA)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (112-CM)
	9X-3401	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	297-4169	[2]	GROMMET
33.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
34.	109-5008	[1]	BUMPER-CONICAL
35.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
36.	5C-7261 M	[1]	NUT (M8X1.25-THD)
37.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
38.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
40.	9X-2043 M	[11]	SCREW-TRUSS HEAD (M6X1X14-MM)
41.	9X-2044 M	[6]	SCREW-TRUSS HEAD (M6X1X16-MM)
42.	9X-2125 M	[4]	BOLT-LOCKING (M10X1.5X25-MM)
43.	331-9731 E		SEAL (4-CM)
44.	328-5492 BH	[50]	SEAL (50-DM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	H		ORDER BY THE DECIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49761577

357-9199: DOOR GP-CAB

DOOR GP-CAB

357-9199 DOOR GP-CAB -RH
S/N B9D1-UP
PART OF 381-7048, 381-7049 ROPS GP

i04562518 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-8591 M	[3]	NUT-CLIP (M6X1-THD)
2.	6V-7636	[2]	PIN AS-SPRING
3.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
4.	252-1862 J	[1]	HANDLE AS-PULL
5.	252-1863	[1]	GASKET
6.	261-1731	[1]	BOOT
7.	269-2890	[1]	CLEVIS
8.	269-2892	[1]	PIN
9.	269-2893	[1]	CLIP
10.	272-1623	[1]	BELLCRANK AS
11.	285-3692	[1]	SPACER-SPECIAL
12.	295-6405	[1]	LATCH AS (RH)
13.	507-2767	[1]	STRIKER AS
14.	299-1020	[1]	LEVER AS
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL
	299-1024	[1]	LEVER
	299-1441	[1]	SPRING
	299-1442	[1]	SPRING
15.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
16.	328-4985	[1]	LATCH AS-DOOR (RH)
17.	357-0728	[1]	HARNESS AS-WINDOW WIPER (LH)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (119-CM)
	9X-3401	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
	329-3734 B		TAPE-ELECTRICAL
18.	357-9181	[1]	DOOR AS (RH)
	7Y-9096 M	[2]	SCREW-TRUSS HEAD (M6X1X6-MM)
	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
	308-2903 M	[3]	NUT-WELD (M6X1-THD)
19.	357-9187	[1]	HANDLE AS-PULL
20.	357-9188	[1]	PLATE
21.	357-9190	[1]	BRACKET AS
22.	357-9191	[1]	BUMPER
23.	357-9236	[1]	GLASS (DOOR)
24.	357-9260	[1]	COVER (WIPER-RH)
25.	357-9261	[1]	COVER-LATCH
26.	357-9652 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
27.	357-9755	[1]	LINKAGE
28.	361-0421	[1]	COVER
29.	372-7541	[1]	BRACKET AS
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
30.	376-4793	[1]	HANDLE AS-PULL
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
31.	380-6158	[2]	HINGE AS
			(EACH INCLUDES)
31A.	372-5042	[2]	BUSHING
32.	4E-1384	[1]	BUMPER-CONICAL
33.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
34.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
35.	5C-7261 M	[1]	NUT (M8X1.25-THD)
36.	6D-4244	[2]	CLIP (LOOP)
37.	8T-4000 M	[2]	SCREW-WASHER HEAD (M8X1.25X4.8-MM)
38.	7X-7729	[12]	WASHER (11X25X3-MM THK)
39.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
40.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
41.	9X-2043 M	[13]	SCREW-TRUSS HEAD (M6X1X14-MM)
42.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
43.	9X-2125 M	[10]	BOLT-LOCKING (M10X1.5X25-MM)
44.	331-9731 E		SEAL (4-CM)
45.	353-7114 E		SEAL (440-CM)
46.	367-2761 E		SEAL (500-CM)
47.	108-5471	[1]	CLEVIS
48.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
49.	6V-8185	[1]	NUT (1/4-20-THD)
50.	3S-2093	[1]	STRAP-CABLE
51.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
52.	242-5206	[4]	SPACER (6.4X12.5X0.76-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49761578

357-9200: DOOR GP-CAB

DOOR GP-CAB

357-9200 DOOR GP-CAB -LH
S/N B9D1-UP
PART OF 381-7048, 381-7049 ROPS GP

i04562525 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-8591 M	[3]	NUT-CLIP (M6X1-THD)
2.	6V-7636	[2]	PIN AS-SPRING
3.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
4.	252-1862 J	[1]	HANDLE AS-PULL
5.	252-1863	[1]	GASKET
6.	261-1731	[1]	BOOT
7.	269-2890	[1]	CLEVIS
8.	269-2892	[1]	PIN
9.	269-2893	[1]	CLIP
10.	272-1623	[1]	BELLCRANK AS
11.	285-3692	[1]	SPACER-SPECIAL
12.	295-6406	[1]	LATCH AS (LH)
13.	507-2767	[1]	STRIKER AS
14.	299-1021 Y	[1]	LEVER GP-CAB DOOR
15.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
16.	328-4984	[1]	LATCH AS-DOOR (LH)
17.	357-0728	[1]	HARNESS AS-WINDOW WIPER (LH)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (134-CM)
	9X-3401	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
	329-3734 B		TAPE-ELECTRICAL
18.	357-9182	[1]	DOOR AS (LH)
	308-2903 M	[3]	NUT-WELD (M6X1-THD)
	7Y-9096 M	[2]	SCREW-TRUSS HEAD (M6X1X6-MM)
	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
19.	357-9187	[1]	HANDLE AS-PULL
20.	357-9188	[1]	PLATE
21.	357-9190	[1]	BRACKET AS
22.	357-9191	[1]	BUMPER
23.	357-9236	[1]	GLASS (DOOR)
24.	357-9257	[1]	COVER (WIPER-LH)
25.	357-9258	[1]	COVER-LATCH
26.	357-9653 Y	[1]	WIPER GP-WINDOW (DOOR, LH)
27.	357-9755	[1]	LINKAGE
28.	361-0421	[1]	COVER
29.	372-7541	[1]	BRACKET AS
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
30.	376-4794	[1]	HANDLE AS-PULL
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
31.	380-6158	[2]	HINGE AS
			(EACH INCLUDES)
31A.	372-5042	[2]	BUSHING
32.	4E-1384	[1]	BUMPER-CONICAL
33.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
34.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
35.	5C-7261 M	[1]	NUT (M8X1.25-THD)
36.	6D-4244	[2]	CLIP (LOOP)
37.	8T-4000 M	[2]	SCREW-WASHER HEAD (M8X1.25X4.8-MM)
38.	7X-7729	[12]	WASHER (11X25X3-MM THK)
39.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
40.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
41.	9X-2043 M	[13]	SCREW-TRUSS HEAD (M6X1X14-MM)
42.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
43.	9X-2125 M	[10]	BOLT-LOCKING (M10X1.5X25-MM)
44.	331-9731 E		SEAL (4-CM)
45.	353-7114 E		SEAL (440-CM)
46.	367-2761 E		SEAL (500-CM)
47.	108-5471	[1]	CLEVIS
48.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
49.	6V-8185	[1]	NUT (1/4-20-THD)
50.	3S-2093	[1]	STRAP-CABLE
51.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
52.	242-5206	[4]	SPACER (6.4X12.5X0.76-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49761579

244-2701: DUCT & FILTER GP-CAB AIR

DUCT & FILTER GP-CAB AIR

244-2701 DUCT & FILTER GP-CAB AIR
S/N B9D2252-UP
PART OF 233-3149, 361-3133 AIR CONDITIONER GP, 233-3130 HEATER GP-CAB

i02786270 SEBP4976

2442701 DUCT & FILTER GP-CAB AIR Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-2376	[2]	WASHER (7X16X0.8-MM THK)
2.	149-1912	[1]	FILTER ELEMENT-CAB AIR (CAB HEATER, AIR CONDITIONER)
			-OR-
	220-8800	[1]	FILTER ELEMENT-CAB AIR (ACTIVATED CHARCOAL)
3.	211-2660	[1]	FILTER ELEMENT-AIR (CAB HEATER, AIR CONDITIONER)
4.	297-4139	[1]	DUCT
5.	297-4140	[1]	DUCT
6.	525-4816	[1]	DUCT AS
	7K-4201	[2]	NUT-SPEED
7.	274-2385	[1]	COVER
8.	274-2392	[2]	SCREW-THUMB
9.	5P-4115	[1]	WASHER-HARD (7.2X19X2-MM THK)
10.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
11.	8T-0640 M	[1]	BOLT (M6X1X30-MM)
12.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
13.	126-5648 E		SEAL (70-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

Information:

OPERATOR STATION

MONITOR GP

Operation and Maintenance Manual

Display Description
AccuGrade^® 2D (CD610) for 120K, 120M, 12K, 12M, 140K, 140M, 14M, 160K, 160M, 16M and 24M Motor Graders

Display and Camera - Clean - If Equipped with Work Area Vision System
140M Motor Grader

Display Description
Accugrade^® GPS (CD700)

Special Instruction

Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}

WAVS Installation Guide for Generic Applications{7347, 7348}
WAVS Installation Guide for Generic Applications{7347, 7348}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Installation of Cat® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of Cat^® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}

WAVS Generic Installation Guide for Certain Cat® Products{7347, 7348}
WAVS Generic Installation Guide for Certain Cat^® Products{7347, 7348}

Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat^® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Technical Information Bulletin

AccuGrade File Limit{7490}
AccuGrade File Limit{7490}

AccuGrade® CD700 Devices not Responding{7220, 7490}
AccuGrade^® CD700 Devices not Responding{7220, 7490}

Incorrect Part Number In CAT Electronic Technician (ET) And In Messenger Display Flashing ECM{0785, 7490, 7620}
Incorrect Part Number In CAT Electronic Technician (ET) And In Messenger Display Flashing ECM{0785, 7490, 7620}

Grade Control Offset Value Can Be Incorrect On Certain Motor Graders{7220, 7490, 7620}
Grade Control Offset Value Can Be Incorrect On Certain Motor Graders{7220, 7490, 7620}

Systems Operation

General Information
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Monitoring System
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Display Module
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Input Components
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Output Components
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Warning Operation
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Menu Navigation
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Performance Menu
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Totals Menu
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Settings Menu
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Service Menu
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Testing and Adjusting

Self Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Module - Replace
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Connector Contact Description
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Troubleshooting

Indicator Lamp Is On Continuously
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Using Messenger to Determine Diagnostic Codes
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Indicator Lamp Is On Continuously
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Indicator Lamp Does Not Illuminate
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0588 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0588 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Indicator Lamp Does Not Illuminate
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0588 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0588 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Indicator Lamp Does Not Illuminate During the Power Up Self Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Indicator Lamp Is On Continuously
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Action Alarm Does Not Sound
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Action Alarm Is On Continuously
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Diagnostic Code List
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

MID 053 - CID 0248 - FMI 09
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

MID 053 - CID 0248 - FMI 14
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

MID 053 - CID 0811 - FMI 09
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Diagnostic Trouble Codes
Cat^® Grade Control Cross Slope System for Motor Graders

Determining Diagnostic Trouble Codes
Cat^® Grade Control Cross Slope System for Motor Graders

Service Magazine

New AccuGrade ® Software is Now Available {7220, 7620}
2007/08/27

A Repair Kit for the Magnet is Now Available for the AccuGrade CD700 Display {7490}
2009/05/04

New Software for the AccuGrade® Laser CD610 Display Is Now Available {7220, 7620}
2009/06/22

New AccuGrade Version 11.10 Software is Now Available {7220, 7620}
2009/06/22

Improved Monitoring System Is Now Used for the Steering System on M-Series Motor Graders {509T, 7490, 7620}
2009/11/24

A New Parameter Is Now Used for Selecting the Hydraulic Oil Type on M-Series Motor Grader {509T, 7490, 7620}
2009/11/24

New Software Is Now Used for the Steering System on M-Series Motor Grader {509T, 7490, 7620}
2009/11/24

New Messenger Display Is Now Used on Certain Motor Graders {7490, 7610, 7620}
2009/12/16

New AccuGrade Software Version 11.21 for the CD700 Display Is Now Available on SISweb {7220, 7620}
2010/07/08

New Gauges Available {7450}
2010/07/08

New Monitor Software Is Now Used On M-Series Motor Graders {7620}
2010/08/04

Improved VisionLinkTM Software Is Now Available for Certain Caterpillar Machines {7601}
2012/06/07

Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04

New Software is Now Used on Certain M Series and M Series II Motor Graders {7490, 7610, 7620}
2013/02/18

New Phone Number for VIMS Support Is Now Available for All Cat® Products Equipped with VIMS {7601}
2015/03/02

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}
A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}

Caterpillar Parts SIS Catalog 140M :

447-2229 DISPLAY GP-CAMERA

361-3145 DISPLAY GP-CAMERA

278-0668 DISPLAY GP-CAMERA

331-7530 DISPLAY AR-MONITOR

292-7980 DISPLAY AR-MONITOR

292-7975 DISPLAY AR-MONITOR

252-1805 CUSHION GP-ARM

363-4962 COVER GP-CAB

286-9124 DISPLAY GP-MONITOR

292-0309 DISPLAY GP-MONITOR

Truck sale:

176,000

Caterpillar 140M2, Construction
- motor graders
HOLT CAT

164,000

Caterpillar 140M2, Construction
- motor graders
HOLT CAT

139,800

Caterpillar 140M2, Construction
- motor graders
FOLEY EQUIPMENT COMPANY

Caterpillar TRADE-IN 140M2, Construction
- motor graders
TRACTORS AND EQUIPMENT (I.T.E.) LTD.
Israel

167,614

Caterpillar 140M2, Construction
- motor graders
CAVPOWER
Australia