246-5719 WIRING GP-REAR S/N B9F834-UP PART OF 349-2550 COMMON AR Type 3 12M MOTOR GRADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 246-5719 WIRING GP-
1. 246-5720 WIRING GP-

LIGHTING GP

2. 233-4623 WIRING GP-
3. 233-4623 WIRING GP-
4. 233-4623 WIRING GP-
5. 247-6430 WIRING GP-

WIRING GP

6. 255-1317 WIRING GP-

SENSOR GP

7. 296-5910 WIRING GP-
8. 311-8585 WIRING GP-
9. 323-5169 WIRING GP-
0. INFORMATION

MOTOR GRADER 12M MOTOR GRADER B9F
12M Motor Grader B9F00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4979 12M B9F (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

246-5719 WIRING GP-REAR

246-5720 WIRING GP-REAR

233-4623 WIRING GP-REAR LIGHTING

#SEBP49790420

246-5719: WIRING GP-REAR

WIRING GP-REAR

246-5719 WIRING GP-REAR
S/N B9F834-UP
PART OF 349-2550 COMMON AR
Type 3

i05275460 SEBP4979

For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	7K-1181 C	[45]	STRAP-CABLE
3.	106-0735 Y	[1]	SENSOR GP-TEMPERATURE (TRANSMISSION, HYDRAULIC OIL)
4.	116-0118	[1]	CLIP
5.	178-0572 M	[1]	STUD-TAPERLOCK (M10X1.5X140-MM)
6.	189-3158	[2]	SUPPRESSOR-ARC
7.	274-6717	[1]	SENSOR-PRESSURE (TURBOCHARGER INLET)
8.	197-6453	[1]	BRACKET AS
9.	240-7193	[1]	RESISTOR AS (500-OHM, 2-WATT)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	251-3265 C	[1]	LINK AS
	6F-0612	[1]	NUT-JAM (1/4-28-THD)
	8S-7048	[1]	ROD END
	9L-3334	[1]	NUT-PLATED (1/4-28-THD, LH)
	036-7232	[1]	ROD END
11.	258-8949 C	[2]	SPACER (7.5X12X56-MM THK)
12.	373-4328 C	[1]	SENSOR GP-POSITION (ROTARY)(ARTICULATION ANGLE)
13.	266-6698	[1]	BRACKET
14.	268-8235	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
	9R-2672 M	[2]	BOSS-THREADED (M10X1.5X120-MM)
15.	279-9658 C	[1]	LEVER
16.	358-3847	[1]	HARNESS AS-PUMP (FUEL PRIMING)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[6]	PLUG-SEAL
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	9X-1056	[3]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	100-5041	[1]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
17.	286-7287	[1]	HARNESS AS-REAR CHASSIS
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[16]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[10]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (20-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
18.	286-7289	[1]	CABLE AS
	030-1707	[1]	TERMINAL-RING (0-GA, 3/8-IN SCREW)
	030-1709	[1]	TERMINAL-RING (0-GA, 1/4-IN SCREW)
	159-8048 E		CABLE-ELECTRICAL (0-GA, BLACK)(64-CM)
19.	287-6687	[1]	BRACKET AS
20.	291-2162	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
21.	301-3034	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
22.	398-4875 C	[1]	HARNESS AS-REAR LIGHTING
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	7N-9017	[2]	TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)
	8T-8737	[4]	PLUG-SEAL
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
23.	301-7323	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	4D-1248	[1]	TERMINAL (00-GA, 3/8-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(22-CM)
24.	322-4651	[1]	CHANNEL AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
25.	322-5719	[1]	CABLE AS
	317-3356	[1]	TERMINAL-RING
	9X-9120	[1]	BOOT (RED)
	159-8047 E		CABLE-ELECTRICAL (0-GA, RED)(205-CM)
	9X-0195	[1]	TERMINAL-RING (0-GA, 3/8-IN SCREW)
	328-8425	[1]	COVER-TERMINAL (RED)
26.	329-5794	[2]	BLOCK
27.	398-2943 C	[1]	HARNESS AS-CHASSIS
	267-9572	[33]	SOCKET-CONNECTION (18-GA)
	7K-1181	[2]	STRAP-CABLE
	2L-8069	[4]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	7N-9017	[1]	TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8801	[3]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACEL AS & WEDGE)
	9X-6857	[17]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	371-8115 E		HOSE (89-CM)
	159-9322	[1]	SEAL-O-RING
	155-2255	[5]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
	9X-1056	[5]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	100-5041	[7]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	135-5010 E		TUBE-HEAT SHRINK (52-MM DIA)(40-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(52-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(90-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	8N-1545	[1]	SOCKET-CONNECTOR (8-GA)
	8N-1541	[5]	SOCKET-CONNECTOR (12-GA TO 14-GA)
	8N-1549	[4]	SOCKET-CONNECTOR (4-GA)
	8T-8730	[108]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[18]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3402	[123]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	126-1768	[11]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[5]	STRAP-CABLE
	245-1042	[1]	PLUG AS-CONNECTOR (64-PIN)
	267-7207 M	[1]	BOLT-SPECIAL (M6X1-THD)
	245-1048	[31]	PLUG-CONNECTOR (1-PIN)
	8T-8737	[85]	PLUG-SEAL
	7G-7917	[15]	PLUG-SEAL
	7G-7918	[3]	PLUG-SEAL
	7G-7919	[5]	PLUG-SEAL
	245-1044	[2]	LOCK-CONNECTOR
	8N-1544	[1]	PIN-CONNECTOR (8-GA)
	8T-8729	[30]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	8N-1518	[2]	PLUG AS-CONNECTOR (25-PIN)
	9X-1054	[3]	PLUG AS-CONNECTOR (4-PIN)
	9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-5615	[2]	SEAL (INTERFACE, 70-PIN)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	147-1446	[1]	PLUG AS-CONNECTOR (70-PIN)
			(EACH PLUG AS INCLUDES)
	159-9322	[1]	SEAL-O-RING
	274-3774	[2]	CAP-CONNECTOR
	8N-1521	[2]	BELL AS-END
	126-1774	[2]	COVER-CONNECTOR
	245-1045	[1]	COVER
28.	335-1704	[1]	HARNESS AS-CHASSIS (BRAKE, FAN, STARTING)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8N-1545	[1]	SOCKET-CONNECTOR (8-GA)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(6-CM)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	274-3774	[1]	CAP-CONNECTOR
	274-3781	[1]	CAP-SEAL
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
29.	353-3810	[1]	HARNESS AS-SENSOR (BRAKE ACCUMULATOR)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
30.	353-4515	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
31.	033-8248 C	[4]	CLIP (LOOP)
32.	124-1479	[1]	CLIP
33.	130-5300 C	[12]	CLIP
34.	132-5789	[12]	CLIP (LADDER)
35.	091-0081	[1]	SPACER (10.5X20X10-MM THK)
36.	133-6934	[1]	SPACER (11X20X25-MM THK)
37.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
38.	134-3355	[1]	STRAP AS
39.	147-0385	[1]	CLIP
40.	156-6175	[1]	CLIP (LADDER)
41.	166-0690 C	[1]	BLOCK AS-MOUNTING
42.	174-5907	[2]	CLIP (LOOP)
43.	1P-7009	[1]	CLIP
45.	2F-7888 C	[2]	SCREW-MACHINE (10-32X1.25-IN)
46.	3B-4619 C	[1]	PIN-COTTER
47.	3E-5169	[1]	GUARD-SWITCH
48.	3E-5239	[1]	RELAY AS (24-VOLT)(FUEL PUMP RELAY)
48A.	3E-5239	[1]	RELAY AS (24-VOLT)(BACKUP ALARM)
48B.	3E-5239	[1]	RELAY AS (24-VOLT)(AIR CONDITIONER)
48C.	3E-5239	[1]	RELAY AS (24-VOLT)(SECONDARY STEERING)
49.	3J-1907	[1]	SEAL-O-RING
50.	3K-0360	[1]	SEAL-O-RING
51.	4B-4274 C	[2]	WASHER (5.5X13X1.2-MM THK)
52.	4D-7388	[2]	CLIP (LOOP)
53.	4D-7794	[4]	CLIP
54.	4D-9517	[1]	CLIP
55.	4K-8864	[8]	CLIP (LOOP)
56.	4P-7429	[1]	CLIP (LADDER)
57.	4P-7581 C	[5]	CLIP (LADDER)
58.	4P-7582	[1]	CLIP (LADDER)
59.	4P-8134	[1]	CLIP (LADDER)
60.	4S-1962	[3]	CLIP (LOOP)
62.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
63.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
64.	6D-4244	[2]	CLIP (LOOP)
65.	6V-0894 C	[1]	SEAL-O-RING
66.	6V-1228	[1]	CLIP
67.	8T-2920	[1]	GROMMET (27-MM ID)
69.	6V-7357 CM	[1]	BOLT (M6X1X25-MM)
70.	6V-7744 M	[2]	LOCKNUT (M10X1.5-THD)
71.	6W-6672	[1]	SPACER (10.5X20X38-MM THK)
72.	7C-4354	[1]	CLIP
73.	7D-7233	[2]	CLIP (LOOP)
74.	7V-6571	[4]	GROMMET
75.	8C-3793 C	[2]	BOLT (1/4-20X3.75-IN)
76.	8M-2773	[1]	CLIP (LOOP)
77.	8R-0721	[2]	SPACER (11X16X35-MM THK)
78.	8T-4121 C	[57]	WASHER-HARD (11X21X2.5-MM THK)
79.	344-5675 M	[3]	NUT (M10X1.5-THD)
80.	8T-4136 M	[19]	BOLT (M10X1.5X25-MM)
81.	8T-4137 CM	[27]	BOLT (M10X1.5X20-MM)
82.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
83.	8T-4191 CM	[1]	BOLT (M10X1.5X16-MM)
84.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
86.	8T-4205 C	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
87.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
88.	8T-6870 M	[2]	BOLT (M8X1.25X70-MM)
89.	9C-5344	[1]	SPACER (10.5X20X18-MM THK)
90.	9M-8406	[5]	CLIP (LOOP)
91.	9X-8256 C	[6]	WASHER (6.6X12X2-MM THK)
92.	204-8000	[7]	MOUNTING-CABLE TIE
93.	204-2281	[7]	STRAP-CABLE
94.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
95.	067-2551	[1]	CLIP
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49790421

246-5720: WIRING GP-REAR

WIRING GP-REAR

246-5720 WIRING GP-REAR -CIRCUIT BREAKER PANEL
S/N B9F1-UP
PART OF 276-1420, 349-2550 COMMON AR

i02793832 SEBP4979

For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	280-8969 Y	[1]	PANEL GP-CIRCUIT BREAKER
2.	287-6435	[1]	BRACKET
3.	287-8827	[1]	PLATE
4.	289-9520	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
	289-9519	[1]	BRACKET
5.	312-2126	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(95-CM)
6.	312-2128	[1]	BRACKET AS
7.	312-2129	[2]	PLATE AS
8.	140-0860	[1]	STRAP AS-GROUND
9.	160-0018 M	[2]	SCREW-FLAT HEAD (M12X1.75X45-MM)
10.	4S-1962	[3]	CLIP (LOOP)
11.	7V-6571	[3]	GROMMET
12.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
14.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
15.	8T-4139 M	[3]	BOLT (M12X1.75X30-MM)
16.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
17.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
18.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49790422

233-4623: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

233-4623 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N B9F1-608
PART OF 298-7463, 298-7464, 298-7465, 300-1086 LIGHTING GP-ROADING

i02776425 SEBP4979

2334623 WIRING GP-REAR LIGHTING Parts scheme

For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[22]	STRAP-CABLE
2.	7X-2393	[4]	BUMPER-CONICAL
3.	9S-1316	[2]	SPRING
4.	116-0118	[2]	CLIP
5.	135-0426 Y	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
6.	199-3368 Y	[2]	LAMP GP-SIGNAL (24-VOLT, TURN)
7.	245-2810	[1]	BRACKET AS (RH)
8.	245-2811	[1]	BRACKET AS (LH)
9.	245-2812	[1]	ARM AS (RH)
	5D-9629	[2]	ROD
10.	245-2813	[1]	ARM AS (LH)
	5D-9629	[3]	ROD
11.	245-2814	[2]	ROD
12.	261-1502 Y	[2]	LAMP GP (24-VOLT)
13.	286-9718	[1]	HARNESS AS-REAR LIGHTING
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
14.	117-9409	[2]	GROMMET
16.	156-6175	[2]	CLIP (LADDER)
17.	1V-6688	[1]	GROMMET
18.	292-9390	[2]	FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)
19.	3B-5301	[2]	PIN-COTTER
20.	5C-2890 M	[18]	NUT (M6X1-THD)
21.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
22.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
24.	6V-7687 M	[2]	LOCKNUT (M12X1.75-THD)
25.	7X-7729	[4]	WASHER (11X25X3-MM THK)
26.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
27.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
28.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	9X-8256	[12]	WASHER (6.6X12X2-MM THK)
30.	292-9391	[2]	FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)
31.	8D-5641 B	[8]	BEARING
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49790423

233-4623: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

233-4623 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N B9F609-693
PART OF 298-7463, 298-7464, 298-7465, 300-1086 LIGHTING GP-ROADING

i03427440 SEBP4979

For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[22]	STRAP-CABLE
2.	7X-2393	[4]	BUMPER-CONICAL
3.	9S-1316	[2]	SPRING
4.	116-0118	[2]	CLIP
5.	135-0426 Y	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
6.	201-5464 CY	[2]	LAMP GP-SIGNAL (12-VOLT, 24-VOLT, TURN)
7.	245-2810	[1]	BRACKET AS (RH)
8.	245-2811	[1]	BRACKET AS (LH)
9.	245-2812	[1]	ARM AS (RH)
10.	245-2813	[1]	ARM AS (LH)
11.	245-2814	[2]	ROD
12.	261-1502 Y	[2]	LAMP GP (24-VOLT)
13.	286-9718	[1]	HARNESS AS-REAR LIGHTING
14.	117-9409	[2]	GROMMET
16.	156-6175	[2]	CLIP (LADDER)
17.	1V-6688	[1]	GROMMET
18.	292-9390	[2]	FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)
19.	3B-5301	[2]	PIN-COTTER
20.	5C-2890 M	[18]	NUT (M6X1-THD)
21.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
22.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
24.	6V-7687 M	[2]	LOCKNUT (M12X1.75-THD)
25.	7X-7729	[4]	WASHER (11X25X3-MM THK)
26.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
27.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
28.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	9X-8256	[12]	WASHER (6.6X12X2-MM THK)
30.	292-9391	[2]	FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)
31.	8D-5641 B	[8]	BEARING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49790424

233-4623: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

233-4623 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N B9F694-UP
PART OF 298-7463, 298-7465 LIGHTING GP-ROADING

i03747092 SEBP4979

For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[22]	STRAP-CABLE
2.	7X-2393	[4]	BUMPER-CONICAL
3.	9S-1316	[2]	SPRING
4.	116-0118	[2]	CLIP
5.	334-8049 CY	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
6.	201-5464 Y	[2]	LAMP GP-SIGNAL (12-VOLT, 24-VOLT, TURN)
7.	245-2810	[1]	BRACKET AS (RH)
8.	245-2811	[1]	BRACKET AS (LH)
9.	245-2812	[1]	ARM AS (RH)
	5D-9629	[2]	ROD
10.	245-2813	[1]	ARM AS (LH)
	5D-9629	[3]	ROD
11.	245-2814	[2]	ROD
12.	261-1502 Y	[2]	LAMP GP (24-VOLT)
13.	286-9718	[1]	HARNESS AS-REAR LIGHTING
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[26]	PLUG-SEAL
	9W-0844	[23]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
16.	117-9409	[2]	GROMMET
17.	156-6175	[2]	CLIP (LADDER)
18.	1V-6688	[1]	GROMMET
19.	3B-4623	[2]	PIN-COTTER
20.	5C-2890 M	[18]	NUT (M6X1-THD)
21.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
22.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
23.	129-3180 M	[2]	LOCKNUT (M12X1.75-THD)
24.	7X-7729	[4]	WASHER (11X25X3-MM THK)
25.	132-0338 B	[8]	WASHER-PLASTIC (13X31.7X0.8-MM THK)
26.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
27.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
28.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	9X-8256	[12]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49790425

247-6430: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

247-6430 WIRING GP-REAR LIGHTING -TAIL
S/N B9F1-UP
CANNOT BE USED WITH @@@@@233-4610@@@@@, @@@@@233-4624@@@@@, @@@@@298-7463@@@@@, @@@@@298-7465@@@@@, @@@@@298-7464@@@@@, @@@@@300-1086@@@@@

i02783026 SEBP4979

2476430 WIRING GP-REAR LIGHTING Parts scheme

For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[25]	STRAP-CABLE
2.	116-0118	[2]	CLIP
3.	334-8049 Y	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
4.	236-1928	[1]	BRACKET AS
5.	239-6379	[1]	BRACKET AS
6.	261-1502 Y	[2]	LAMP GP (24-VOLT)
7.	286-9718	[1]	HARNESS AS-REAR LIGHTING
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8.	156-6175	[2]	CLIP (LADDER)
9.	1V-6688	[1]	GROMMET
10.	5C-2890 M	[12]	NUT (M6X1-THD)
11.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
13.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4172 M	[6]	BOLT (M10X1.5X80-MM)
15.	9X-8256	[6]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49790426

255-1317: WIRING GP-SECONDARY STEERING

WIRING GP-SECONDARY STEERING

255-1317 WIRING GP-SECONDARY STEERING
S/N B9F1-UP
PART OF 276-1420, 349-2550 COMMON AR

i02793835 SEBP4979

2551317 WIRING GP-SECONDARY STEERING Parts scheme

For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	179-0006 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT TO 32-VOLT)(SECONDARY STEERING RELAY)
3.	268-6609	[1]	CABLE AS
	1S-7252	[2]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	9G-8909	[2]	COVER-TERMINAL (BLACK)
	6V-2722 D		TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)
	159-8050 E		CABLE (00-GA, BLACK)(28-CM)
4.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
7.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
8.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49790427

296-5910: WIRING GP-SENSOR

WIRING GP-SENSOR

296-5910 WIRING GP-SENSOR -STEERING CYLINDER POSITION
S/N B9F1-UP
NON ALL WHEEL DRIVE, FRONT
PART OF 276-1420, 349-2550 COMMON AR

i02787946 SEBP4979

For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	296-5907	[1]	HARNESS AS-SENSOR (STEERING, LH)
2.	296-5908	[1]	HARNESS AS-SENSOR (STEERING, RH)
3.	297-8049	[2]	GROMMET
4.	7K-1181	[4]	STRAP-CABLE
5.	9M-8406	[2]	CLIP (LOOP)

#SEBP49790428

311-8585: WIRING GP-SENSOR

WIRING GP-SENSOR

311-8585 WIRING GP-SENSOR -STEERING CYLINDER POSITION
S/N B9F1300-UP
NON ALL WHEEL DRIVE, FRONT
PART OF 366-0364 INSTALLATION AR-FIELD

i03916504 SEBP4979

For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	355-5078	[1]	HARNESS AS-SENSOR (STEERING, LH)
	8T-8737	[1]	PLUG-SEAL
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	232-0895 E		CONDUIT-FLEXIBLE (9.6-MM ID)(81-CM)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2.	355-5079	[1]	HARNESS AS-SENSOR (STEERING, RH)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	232-0895 E		CONDUIT-FLEXIBLE (9.6-MM ID)(120-CM)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3.	355-5085	[2]	PLATE AS
4.	355-5086	[2]	COVER
5.	8M-2770	[7]	CLIP (LOOP)
6.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4137 M	[9]	BOLT (M10X1.5X20-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49790429

323-5169: WIRING GP-SENSOR

WIRING GP-SENSOR

323-5169 WIRING GP-SENSOR -COLD WEATHER OPERATION
S/N B9F1-UP
PART OF 333-1218 COLD WEATHER AR

i03460121 SEBP4979

For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	463-8243	[1]	SENSOR GP-PRESSURE (TRANSMISSION PUMP)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	194-5226	[3]	WIRE AS (16-GA)
			-OR-
	194-5227	[3]	WIRE AS (14-GA)
2.	324-3355 Y	[1]	HARNESS AS-WIRING (XSMSN PUMP PRESSURE SENSOR)
3.	324-3356 Y	[1]	HARNESS AS-SOLENOID (XMSN PUMP BYPASS)
4.	130-5300	[1]	CLIP
5.	132-5789	[1]	CLIP (LADDER)
6.	148-8309	[1]	ADAPTER AS
	2P-8421	[1]	ADAPTER-O-RING
	3D-2824	[1]	SEAL-O-RING
7.	3J-1907	[1]	SEAL-O-RING
8.	4P-7581	[3]	CLIP (LADDER)
9.	4P-8134	[1]	CLIP (LADDER)
10.	7K-1181	[9]	STRAP-CABLE
11.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Fuses - Replace
120M and 12M Motor Graders

Circuit Breakers - Reset
120M and 12M Motor Graders

Battery Disconnect Switch
120M and 12M Motor Graders

Engine Shutdown Switch
120M and 12M Motor Graders

Engine Shutdown Switch - Check
120M and 12M Motor Graders

Battery or Battery Cable - Inspect/Replace
120M and 12M Motor Graders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}

A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}

Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}
Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}

Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}
Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}

Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}
Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Install a Forward Facing Camera on the Front Cover on Certain Motor Graders{1408, 7348}
Procedure to Install a Forward Facing Camera on the Front Cover on Certain Motor Graders{1408, 7348}

Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SECONDARY STEERING HARNESS ON CERTAIN 120M AND 12M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SECONDARY STEERING HARNESS ON CERTAIN 120M AND 12M MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION OIL PRESSURE SENSOR ON CERTAIN 120M, 120M 2, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION OIL PRESSURE SENSOR ON CERTAIN 120M, 120M 2, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Technical Information Bulletin

Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}
Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}

Specifications

Magnetic Switch (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Solenoid Valve (Hydraulic Fan)
120M and 12M Motor Graders Braking and Hydraulic Fan System

Pressure Sensor (Brake Oil Accumulator) - Use with the <B>251-8256</B> Control Manifold Gp
120M and 12M Motor Graders Braking and Hydraulic Fan System

Temperature Sensor (Transmission Oil)
120M, 12M, 140M and 160M Motor Graders Power Train

Speed Sensor (Transmission) - Intermediate
120M, 12M, 140M and 160M Motor Graders Power Train

Pressure Sensor (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Toggle Switch (Ground Level Shutdown)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Speed Sensor (Transmission) - Input and Output
120M, 12M, 140M and 160M Motor Graders Power Train

Ball Switch (Centershift Indicator)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train

Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Pressure Sensor (Brake Oil Accumulator)
120M and 12M Motor Graders Braking and Hydraulic Fan System

Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Testing and Adjusting

Electrical Connector - Inspect
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Electric Starting System - Test
C6.6 Engines for Caterpillar Built Machines

Magnetic Switch (Secondary Steering Relay) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Electrical Connector - Inspect
AccuGrade® GPS v11 for CD700

Wiring Harness (Open Circuit) - Test
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

Wiring Harness (Short Circuit) - Test
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Electrical Connector - Inspect
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Electrical Connector - Inspect
AccuGrade^® (CD610)

Wiring Harness (Open Circuit) - Test
AccuGrade^® (CD610)

Wiring Harness (Short Circuit) - Test
AccuGrade^® (CD610)

Connector Contact Description
AccuGrade^® (CD610)

Connector Contact Description
AccuGrade® GPS v11 for CD700

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

System Schematic
MSS3s Machine Security System

Connector Contact Description
Cat^® Grade Control Cross Slope System for Motor Graders

Troubleshooting

Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0070 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0070 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Switch Circuits
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 082 - CID 0490 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0490 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 0368 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0368 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Electrical Power Supply
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 114 - CID 1396 - FMI 03
AccuGrade® GPS v11 for CD700

MID 114 - CID 1396 - FMI 05
AccuGrade® GPS v11 for CD700

MID 114 - CID 1396 - FMI 06
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

MID 027 - CID 2304 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2304 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2304 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0627 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0627 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Electrical Connectors - Inspect
C6.6 Engines For Caterpillar Built Machines

ECM Harness Connector Terminals
C6.6 Engines For Caterpillar Built Machines

CID 0168 FMI 00
C6.6 Engines For Caterpillar Built Machines

CID 0168 FMI 01
C6.6 Engines For Caterpillar Built Machines

CID 0172 FMI 03
C6.6 Engines For Caterpillar Built Machines

CID 0172 FMI 04
C6.6 Engines For Caterpillar Built Machines

Connector Locations
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

CID 0168 FMI 02
C6.6 Engines For Caterpillar Built Machines

CID 1785 FMI 03
C6.6 Engines For Caterpillar Built Machines

CID 1785 FMI 04
C6.6 Engines For Caterpillar Built Machines

CID 1785 FMI 10
C6.6 Engines For Caterpillar Built Machines

CID 1834 FMI 02
C6.6 Engines For Caterpillar Built Machines

Sensors and Electrical Connectors
C6.6 Engines For Caterpillar Built Machines

Engine Wiring Information
C6.6 Engines For Caterpillar Built Machines

CAN Data Link
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

MID 145 - CID 0650 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 145 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

CID 0168 FMI 03
C6.6 Engines For Caterpillar Built Machines

CID 0168 FMI 04
C6.6 Engines For Caterpillar Built Machines

Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C6.6 Engines For Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

MID 027 - CID 2976 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2976 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2976 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
Cat^® Grade Control Cross Slope System for Motor Graders

Wiring Harness (Short Circuit) - Test
Cat^® Grade Control Cross Slope System for Motor Graders

Disassembly and Assembly

Battery - Remove and Install
120M and 12M Motor Graders Engine Supplement

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

A new Cab Wiring Group Updates the Cab Arrangement {1408, 7301, 7332}
2008/10/13

New Parts Update the Rear Wiring Group {1408}
2009/02/23

A New Circuit Breaker and a Cover are Available for the High Intensity Discharge Lights on Certain Motor Graders {1420, 1434}
2009/12/21

New Wiring Harnesses Are Now Used on Certain M-Series Motor Graders {1408}
2010/02/10

A New Design for the Secondary Steering Relay is Now Used on Some M-Series Motor Graders {1408, 4344, 7499}
2009/12/24

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

New Steering Cylinder Sensor Harnesses are now Available for Certain M Series Motor Graders {1408}
2011/05/09

An Improved Flasher Assembly Is Now Used On Certain M Series and M 2 Series Motor Graders {1430, 4493}
2013/07/25

Heated Anti-Icing Glass is Now Available for Certain M and M Series 2 Motor Graders {1408, 7305, 7308, 7310}
2011/12/26

Improvements Have Been Made to the Steering Position Sensing System on Certain M Series Motor Graders {1408, 430S, 7620}
2011/12/14

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

New Cable Strap and Cable Tie Mounting for the Rear Wiring Group is Now Used on Certain Motor Graders {1408}
2012/12/11

New Joystick Kit Is Now Available as a Service Replacement for Push Button Faceplate on Certain M Series and M Series 2 Motor Graders {1408, 3168, 4343, 5063, 5705}
2013/06/13

A New Flasher Assembly for the Turn Signal Is Now Available for Certain M and M Series 2 Motor Graders {1408}
2014/03/31

An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/11/12

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

New Lighting Harness As Is Now Available for Certain M Series, and M Series 2 Motor Graders {1408, 1429}
New Lighting Harness As Is Now Available for Certain M Series, and M Series 2 Motor Graders {1408, 1429}

A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}
A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}

New AccuGrade Brackets are Now Used on Certain K and M Series Motor Graders {1408}
New AccuGrade Brackets are Now Used on Certain K and M Series Motor Graders {1408}

Caterpillar Parts SIS Catalog 12M :

246-5719 WIRING GP-REAR

431-4286 WIRING GP-POWER RECEPTACLE

352-1595 WIRING GP-POWER RECEPTACLE

253-1967 WIRING GP-MONITOR

246-5720 WIRING GP-REAR

233-4623 WIRING GP-REAR LIGHTING

247-6430 WIRING GP-REAR LIGHTING

255-1317 WIRING GP-SECONDARY STEERING

296-5910 WIRING GP-SENSOR

311-8585 WIRING GP-SENSOR

Truck sale:

181,000

Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA

187,500

Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA

289,000

Caterpillar 12M2, Construction
- motor graders
WAGNER EQUIPMENT CO

170,000

Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA

205,000

Caterpillar 12M2, Construction
- motor graders
CAROLINA CAT