AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

247-4030 LINES GP-FUEL S/N B9C561-UP PART OF 349-2548 COMMON AR 120M MOTOR GRADER


FUEL SYSTEM
LINES GP-FUEL
TANK GP-FUEL
PUMP GP-FUEL INJECTION

MOTOR GRADER 120M MOTOR GRADER B9C
 120M Motor Grader B9C00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4980 120M B9C   (2007)

FUEL SYSTEM

LINES GP-FUEL
FILTER & LINES GP-FUEL
380-1968 FILTER & LINES GP-FUEL
LINES GP-FUEL
247-4030 LINES GP-FUEL
LINES GP-FUEL
247-4030 LINES GP-FUEL
LINES GP-FUEL
247-4030 LINES GP-FUEL
LINES GP-FUEL
279-9346 LINES GP-FUEL
LINES GP-FUEL
279-9346 LINES GP-FUEL
 

#SEBP49800170
 

247-4030: LINES GP-FUEL

247-4030 LINES GP-FUEL
S/N B9C561-UP
PART OF 349-2548 COMMON AR
i03881862 SEBP4980
2474030 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 124-6256 [1] CLAMP-HOSE  
3. 8T-9655 [6] MOUNT-ISOLATION  
4. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
5. 191-1783 [2] SPACER (8.5X12.7X87.3-MM THK)  
6. 212-3657 Y [1] PUMP GP-FUEL PRM & WATER SEP (ELECTRIC)  
7. 8T-1889 [2] CLIP (SLOT)  
8. 316-4861 I [1] HOSE AS  
9. 319-6036 I [1] HOSE AS  
10. 319-6037 I [1] HOSE AS  
11. 100-4336 [1] CLIP (LOOP)  
12. 8T-1890 [2] CLIP (TAB)  
13. 148-8372 [1] ELBOW AS  
  6V-8721 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
14. 148-8378 [1] ELBOW AS  
  6V-8724 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
15. 164-5619 [2] PLUG AS  
    (EACH INCLUDES)
  9S-8006 [1] PLUG (7/8-14-THD)  
  2M-9780 [1] SEAL-O-RING  
16. 198-4777 C [1] WASHER-HARD (11X25X10-MM THK)  
17. 1S-0994 [4] CLIP (LOOP)  
18. 2U-6826 [1] CONNECTOR AS  
  260-9155 [1] CONNECTOR  
  6V-8397 [1] SEAL-O-RING  
  6V-9028 [1] SEAL-O-RING  
19. 353-7954 [2] GROMMET (16-MM ID)  
20. 5P-9299 [1] CLIP (LOOP)  
21. 6K-8178 [1] CLIP (LOOP)  
22. 6W-7636 [1] SPACER (11.13X19.05X30-MM THK)  
23. 8C-6959 CE HOSE (31-CM)  
24. 7X-2539 M [2] BOLT (M8X1.25X110-MM)  
25. 9N-0869 [6] WASHER-HARD (8.8X25.5X2-MM THK)  
26. 8T-4121 C [9] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 CM [2] NUT (M10X1.5-THD)  
28. 8T-4136 CM [2] BOLT (M10X1.5X25-MM)  
29. 8T-4137 CM [1] BOLT (M10X1.5X20-MM)  
31. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
32. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
33. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49800171
 

279-9346: LINES GP-FUEL

279-9346 LINES GP-FUEL
S/N C6E617-4878
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY
AN ATTACHMENT
i02905932 SEBP4980
2799346 LINES GP-FUEL Parts scheme 2799346 LINES GP-FUEL Parts scheme 2799346 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0260 M [2] BOLT (M8X1.25X25-MM)  
2. 6I-0593 M [2] BOLT (M10X1.5X30-MM)  
3. 106-8916 CM [2] BOLT (M6X16-MM)  
4. 124-3815 CM [2] BOLT (M8X1.25X16-MM)  
5. 215-9509 [1] FITTING (QUICK DISCONNECT, MALE)  
6. 216-9752 [2] WASHER  
7. 234-3063 C [8] CLIP  
8. 277-6165 [2] CONNECTION-FUEL  
9. 293-9820 C [1] BRACKET AS  
11. 295-4670 [1] BOLT-SPECIAL (BANJO)  
12. 305-7306 C [1] BRACKET AS  
12A. 232-1115 [3] CLIP-PIPE  
13. 305-7307 C [1] BRACKET AS  
13A. 232-1115 [2] CLIP-PIPE  
14. 305-7308 C [1] TUBE  
15. 323-5736 C [1] BRACKET  
15A. 232-1115 [4] CLIP-PIPE  
16. 309-0776 C [1] BRACKET AS  
16A. 232-1115 [1] CLIP-PIPE  
17. 312-2568 C [1] BRACKET AS  
17A. 232-1115 [7] CLIP-PIPE  
18. 312-2570 C [1] TUBE-FUEL  
19. 312-2571 C [1] TUBE-FUEL  
20. 312-2572 C [1] TUBE-FUEL  
21. 312-2573 C [1] TUBE-FUEL  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP49800172
 

279-9346: LINES GP-FUEL

279-9346 LINES GP-FUEL
S/N C6E4879-6722
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY
AN ATTACHMENT
i02939621 SEBP4980
2799346 LINES GP-FUEL Parts scheme 2799346 LINES GP-FUEL Parts scheme 2799346 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0260 M [2] BOLT (M8X1.25X25-MM)  
2. 6I-0593 M [2] BOLT (M10X1.5X30-MM)  
3. 106-8916 M [2] BOLT (M6X16-MM)  
4. 124-3815 M [2] BOLT (M8X1.25X16-MM)  
5. 215-9509 [1] FITTING (QUICK DISCONNECT, MALE)  
6. 317-8476 C [2] WASHER-SEALING  
7. 234-3063 [8] CLIP  
8. 277-6165 [2] CONNECTION-FUEL  
9. 293-9820 [1] BRACKET AS  
9A. 232-1115 [6] CLIP-PIPE  
10. 6I-0217 CM [1] BOLT (M8X1.25X20-MM)  
11. 295-4670 [1] BOLT-SPECIAL (BANJO)  
12. 305-7306 [1] BRACKET AS  
12A. 232-1115 [3] CLIP-PIPE  
13. 305-7307 [1] BRACKET AS  
13A. 232-1115 [2] CLIP-PIPE  
14. 305-7308 [1] TUBE  
15. 323-5736 [1] BRACKET  
15A. 232-1115 [4] CLIP-PIPE  
16. 309-0776 [1] BRACKET AS  
16A. 232-1115 [1] CLIP-PIPE  
17. 321-3112 C [1] BRACKET  
18. 312-2570 [1] TUBE-FUEL  
19. 312-2571 [1] TUBE-FUEL  
20. 328-9551 [1] TUBE-FUEL  
21. 328-9552 [1] TUBE-FUEL  
22. 317-7147 [1] CLIP  
23. 6I-0654 M [2] BOLT (M10X1.5X25-MM)  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP49800173
 

281-5635: MOUNTING GP-FUEL TANK

281-5635 MOUNTING GP-FUEL TANK
S/N B9C1-UP
PART OF 234-7715, 349-2548 COMMON AR
i02793667 SEBP4980
2815635 MOUNTING GP-FUEL TANK Parts scheme 2815635 MOUNTING GP-FUEL TANK Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-7187 [1] LOCK  
3. 7J-6356 [2] TUBE  
4. 216-2211 [4] CLAMP  
5. 509-6660 [2] HOSE-FUEL  
6. 270-3650 [4] PLATE  
7. 270-3651 [2] PLATE AS  
8. 270-9583 [2] PLATE  
9. 281-3431 [1] BRACKET AS  
10. 281-3432 [1] TUBE  
11. 281-3433 [2] HOSE  
12. 286-7280 [1] PLATE AS  
13. 370-7334 [1] GUARD  
15. 335-9214 [4] CLAMP-BAND  
16. 1V-7801 [2] SPACER (0.546X0.840X2.38-IN THK)  
17. 287-5718 [2] WASHER-HARD (22X60X6-MM THK)  
18. 5P-1076 [30] WASHER-HARD (13.5X30X4-MM THK)  
19. 5P-7470 [1] CLIP (SLOT)  
20. 5P-7471 [1] CLIP (TAB)  
21. 5P-7703 [1] GROMMET (52-MM ID)  
22. 7X-2557 M [2] BOLT (M16X2X140-MM)  
23. 7X-7729 [4] WASHER (11X25X3-MM THK)  
24. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
26. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
27. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
28. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
29. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
31. 8T-4192 M [16] BOLT (M12X1.75X25-MM)  
32. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
36. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
37. 340-5140 [1] BRACKET  
38. 148-8415 [1] REDUCER AS  
  6V-8936 [1] REDUCER  
  6V-8397 [1] SEAL-O-RING  
39. 8C-0620 [4] PROTECTOR-THREAD  
  M   METRIC PART
 

#SEBP49800174
 

276-8398: PUMP GP-FUEL INJECTION

276-8398 PUMP GP-FUEL INJECTION
S/N C6E617-5432
PART OF 303-2929 PUMP GP-FUEL INJECTION
AN ATTACHMENT
i02814311 SEBP4980
2768398 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-7100 [1] SEAL-O-RING  
2. 238-0120 [1] SENSOR GP-SPEED (SECONDARY, TIMING)  
3. 247-6019 [1] SEAL-O-RING  
4. 248-1066 [1] FITTING-FUEL  
5. 293-0249 [1] PUMP GP-FUEL TRANSFER  
6. 117-1385 [1] SEAL-O-RING  
7. 5A-3604 M [5] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
8. 6D-7889 [1] SEAL-O-RING  
9. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
 

#SEBP49800175
 

303-2929: PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E617-3159
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY
AN ATTACHMENT
i02814304 SEBP4980
3032929 PUMP GP-FUEL INJECTION Parts scheme 3032929 PUMP GP-FUEL INJECTION Parts scheme 3032929 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 276-8398 Y [1] PUMP GP-FUEL INJECTION  
2. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 232-3149 [6] WASHER (8.35X16.85X1.55-MM THK)  
5. 310-7918 [1] BRACKET-SUPPORT  
6. 287-6838 [1] BRACKET  
7. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
8. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
9. 287-6839 [2] BOLT  
10. 308-8426 [1] RAIL AS-FUEL  
11. 300-2940 [1] BRACKET  
12. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
13. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
14. 217-9039 [1] STRAP-CABLE  
15. 290-3910 [1] LINE-FUEL INJECTION  
16. 280-1889 [4] CLAMP  
17. 280-1890 [4] CLAMP  
18. 280-1891 [4] ISOLATOR  
19. 241-4291 [4] SCREW  
20. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
21. 292-3790 Y [6] INJECTOR GP-FUEL  
22. 278-5168 [6] CLAMP-INJECTOR  
23. 278-5170 [6] BOLT  
24. 290-3911 [1] LINE-FUEL INJECTION (CYL NO. 1)  
25. 290-3912 [1] LINE-FUEL INJECTION (CYL NO. 2)  
26. 290-3913 [1] LINE-FUEL INJECTION (CYL NO. 3)  
27. 290-3914 [1] LINE-FUEL INJECTION (CYL NO. 4)  
28. 290-3915 [1] LINE-FUEL INJECTION (CYL NO. 5)  
29. 290-3916 [1] LINE-FUEL INJECTION (CYL NO. 6)  
30. 278-5180 [2] CLIP  
31. 292-0848 [1] TUBE  
32. 225-8524 [1] BOLT-SPECIAL  
33. 216-9752 [2] WASHER  
34. 286-3683 [1] CONTROL GP-UNPROGRAMMED  
35. 278-5201 [2] CONNECTION  
36. 278-5202 [2] SEAL-O-RING  
37. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
38. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
39. 155-0576 [8] MOUNT-ISOLATION  
40. 278-5203 [4] SPACER  
41. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
42. 293-9901 [1] BRACKET  
43. 268-6678 [1] BRACKET AS  
  260-3719 [1] BRACKET  
43A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
44. 268-6677 [1] BRACKET AS  
  260-3718 [1] BRACKET  
44A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
45. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
45A. 278-5226 [1] SEAL-O-RING  
46. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
46A. 274-1639 [1] SEAL  
47. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
48. 278-5272 [1] KIT-SENSOR (AIR TEMPERATURE)  
48A. 278-5226 [1] SEAL-O-RING  
49. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
49A. 199-9252 [1] SEAL-O-RING  
50. 278-5307 [1] KIT-SENSOR (WATER TEMPERATURE)  
50A. 199-9267 [1] SEAL-O-RING  
51. 311-6342 [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
51A. 309-8006 [1] WASHER  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP49800176
 

303-2929: PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E3160-5432
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY
AN ATTACHMENT
i02861631 SEBP4980
3032929 PUMP GP-FUEL INJECTION Parts scheme 3032929 PUMP GP-FUEL INJECTION Parts scheme 3032929 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 276-8398 Y [1] PUMP GP-FUEL INJECTION  
2. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 232-3149 [6] WASHER (8.35X16.85X1.55-MM THK)  
5. 310-7918 [1] BRACKET-SUPPORT  
6. 287-6838 [1] BRACKET  
7. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
8. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
9. 287-6839 [2] BOLT  
10. 311-6632 C [1] RAIL AS-FUEL  
11. 300-2940 [1] BRACKET  
12. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
13. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
14. 217-9039 [1] STRAP-CABLE  
15. 290-3910 [1] LINE-FUEL INJECTION  
16. 280-1889 [4] CLAMP  
17. 280-1890 [4] CLAMP  
18. 280-1891 [4] ISOLATOR  
19. 241-4291 [4] SCREW  
20. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
21. 306-9390 CY [6] INJECTOR GP-FUEL  
22. 278-5168 [6] CLAMP-INJECTOR  
23. 278-5170 [6] BOLT  
24. 290-3911 [1] LINE-FUEL INJECTION (CYL NO. 1)  
25. 290-3912 [1] LINE-FUEL INJECTION (CYL NO. 2)  
26. 290-3913 [1] LINE-FUEL INJECTION (CYL NO. 3)  
27. 290-3914 [1] LINE-FUEL INJECTION (CYL NO. 4)  
28. 290-3915 [1] LINE-FUEL INJECTION (CYL NO. 5)  
29. 290-3916 [1] LINE-FUEL INJECTION (CYL NO. 6)  
30. 278-5180 [2] CLIP  
31. 321-1270 [1] TUBE-OIL  
32. 225-8524 [1] BOLT-SPECIAL  
33. 320-2391 [2] WASHER  
34. 286-3683 [1] CONTROL GP-UNPROGRAMMED  
35. 278-5201 [2] CONNECTION  
36. 278-5202 [2] SEAL-O-RING  
37. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
38. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
39. 155-0576 [8] MOUNT-ISOLATION  
40. 278-5203 [4] SPACER  
41. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
42. 293-9901 [1] BRACKET  
43. 268-6678 [1] BRACKET AS  
43A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
44. 268-6677 [1] BRACKET AS  
44A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
45. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
45A. 199-9267 [1] SEAL-O-RING  
46. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
46A. 274-1639 [1] SEAL  
47. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
48. 278-5272 [1] KIT-SENSOR (AIR TEMPERATURE)  
48A. 278-5226 [1] SEAL-O-RING  
49. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
49A. 199-9252 [1] SEAL-O-RING  
50. 278-5307 [1] KIT-SENSOR (WATER TEMPERATURE)  
50A. 199-9267 [1] SEAL-O-RING  
51. 311-6342 [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
51A. 309-8006 [1] WASHER  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP49800177
 

303-2929: PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E5433-UP; G9G1-UP
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY
AN ATTACHMENT
i03106537 SEBP4980
3032929 PUMP GP-FUEL INJECTION Parts scheme 3032929 PUMP GP-FUEL INJECTION Parts scheme 3032929 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 317-8021 CY [1] PUMP GP-FUEL INJECTION  
2. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 232-3149 C [3] WASHER (8.35X16.85X1.55-MM THK)  
5. 310-7918 [1] BRACKET-SUPPORT  
6. 287-6838 [1] BRACKET  
7. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
8. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
9. 287-6839 [2] BOLT  
10. 318-2396 [1] RAIL AS-FUEL  
  305-5291 [1] VALVE AS-RELIEF (FUEL RAIL)  
  228-7102 [1] SEAL-O-RING  
11. 300-2940 [1] BRACKET  
12. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
13. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
14. 217-9039 [1] STRAP-CABLE  
15. 336-8180 [1] LINE-FUEL INJECTION  
16. 330-3685 [4] CLAMP  
17. 330-3687 [4] CLAMP  
18. 330-5467 [4] ISOLATOR  
19. 241-4291 [4] SCREW  
20. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
21. 320-0690 CY [6] INJECTOR GP-FUEL  
22. 278-5168 [6] CLAMP-INJECTOR  
23. 278-5170 [6] BOLT  
24. 336-8174 [1] LINE-FUEL INJECTION (CYL NO. 1)  
25. 336-8175 [1] LINE-FUEL INJECTION (CYL NO. 2)  
26. 336-8176 [1] LINE-FUEL INJECTION (CYL NO. 3)  
27. 336-8177 [1] LINE-FUEL INJECTION (CYL NO. 4)  
28. 336-8178 [1] LINE-FUEL INJECTION (CYL NO. 5)  
29. 336-8179 [1] LINE-FUEL INJECTION (CYL NO. 6)  
30. 278-5180 [2] CLIP  
31. 321-1270 [1] TUBE-OIL  
32. 225-8524 [1] BOLT-SPECIAL  
33. 160-0162 C [2] WASHER  
34. 331-7539 [1] CONTROL GP-UNPROGRAMMED  
35. 278-5201 [2] CONNECTION  
36. 278-5202 [2] SEAL-O-RING  
37. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
38. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
39. 155-0576 [8] MOUNT-ISOLATION  
40. 278-5203 [4] SPACER  
41. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
42. 293-9901 [1] BRACKET  
43. 268-6678 [1] BRACKET AS  
43A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
44. 268-6677 [1] BRACKET AS  
44A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
45. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
45A. 199-9267 [1] SEAL-O-RING  
46. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
46A. 274-1639 [1] SEAL  
  238-0120 [1] SENSOR GP-SPEED  
47. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
48. 278-5272 [1] KIT-SENSOR (AIR TEMPERATURE)  
48A. 278-5226 [1] SEAL-O-RING  
49. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
49A. 199-9252 [1] SEAL-O-RING  
50. 278-5307 [1] KIT-SENSOR (WATER TEMPERATURE)  
50A. 199-9267 [1] SEAL-O-RING  
51. 311-6342 [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
51A. 309-8006 [1] WASHER  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP49800178
 

303-2929: PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E5433-22184; G9G1-UP
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY
AN ATTACHMENT
i04880289 SEBP4980
3032929 PUMP GP-FUEL INJECTION Parts scheme 3032929 PUMP GP-FUEL INJECTION Parts scheme 3032929 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 351-0973 CY [1] PUMP GP-FUEL INJECTION  
2. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 232-3149 C [3] WASHER (8.35X16.85X1.55-MM THK)  
5. 310-7918 [1] BRACKET-SUPPORT  
6. 287-6838 [1] BRACKET  
7. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
8. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
9. 287-6839 [2] BOLT  
10. 318-2396 [1] RAIL AS-FUEL  
10A. 305-5291 [1] VALVE AS-RELIEF (FUEL RAIL)  
11. 300-2940 [1] BRACKET  
12. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
13. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
14. 217-9039 [1] STRAP-CABLE  
15. 336-8180 [1] LINE-FUEL INJECTION  
16. 330-3685 [4] CLAMP  
17. 330-3687 [4] CLAMP  
18. 330-5467 [4] ISOLATOR  
19. 241-4291 [4] SCREW  
20. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
21. 320-0690 CY [6] INJECTOR GP-FUEL  
22. 278-5168 [6] CLAMP-INJECTOR  
23. 278-5170 [6] BOLT  
24. 336-8174 [1] LINE-FUEL INJECTION (CYL NO. 1)  
25. 336-8175 [1] LINE-FUEL INJECTION (CYL NO. 2)  
26. 336-8176 [1] LINE-FUEL INJECTION (CYL NO. 3)  
27. 336-8177 [1] LINE-FUEL INJECTION (CYL NO. 4)  
28. 336-8178 [1] LINE-FUEL INJECTION (CYL NO. 5)  
29. 336-8179 [1] LINE-FUEL INJECTION (CYL NO. 6)  
30. 278-5180 [2] CLIP  
31. 321-1270 [1] TUBE-OIL  
32. 225-8524 [1] BOLT-SPECIAL  
33. 160-0162 C [2] WASHER  
34. 331-7539 [1] CONTROL GP-UNPROGRAMMED  
35. 278-5201 [2] CONNECTION  
36. 278-5202 [2] SEAL-O-RING  
37. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
38. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
39. 155-0576 [8] MOUNT-ISOLATION  
40. 278-5203 [4] SPACER  
41. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
42. 293-9901 [1] BRACKET  
43. 268-6678 [1] BRACKET AS  
43A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
44. 268-6677 [1] BRACKET AS  
44A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
45. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
45A. 199-9267 [1] SEAL-O-RING  
46. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
46A. 274-1639 [1] SEAL  
  238-0120 [1] SENSOR GP-SPEED  
47. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
48. 278-5272 [1] KIT-SENSOR (AIR TEMPERATURE)  
48A. 278-5226 [1] SEAL-O-RING  
49. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
49A. 199-9252 [1] SEAL-O-RING  
50. 278-5307 [1] KIT-SENSOR (WATER TEMPERATURE)  
50A. 199-9267 [1] SEAL-O-RING  
51. 311-6342 [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
51A. 309-8006 [1] WASHER  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP49800179
 

303-2929: PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E22185-UP; G9G1-UP
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY
AN ATTACHMENT
i04889462 SEBP4980
3032929 PUMP GP-FUEL INJECTION Parts scheme 3032929 PUMP GP-FUEL INJECTION Parts scheme 3032929 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 317-8021 Y [1] PUMP GP-FUEL INJECTION  
2. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
5. 310-7918 [1] BRACKET-SUPPORT  
6. 287-6838 [1] BRACKET  
7. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
8. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
9. 287-6839 [2] BOLT  
10. 438-3416 [1] RAIL AS-FUEL  
10A. 416-7101 [1] VALVE AS-RELIEF (FUEL RAIL)  
  228-7102 [1] SEAL-O-RING  
13. 6I-4793 CM [3] BOLT (M8X1.25X50-MM)  
15. 355-1582 C [1] TUBE AS  
16. 330-3685 C [3] CLAMP  
17. 330-3687 C [3] CLAMP  
18. 330-5467 C [3] ISOLATOR  
20. 6I-0254 CM [3] BOLT (M8X1.25X30-MM)  
21. 320-0690 Y [6] INJECTOR GP-FUEL  
22. 278-5168 [6] CLAMP-INJECTOR  
23. 278-5170 [6] BOLT  
24. 336-8174 [1] LINE-FUEL INJECTION (CYL NO. 1)  
25. 336-8175 [1] LINE-FUEL INJECTION (CYL NO. 2)  
26. 336-8176 [1] LINE-FUEL INJECTION (CYL NO. 3)  
27. 336-8177 [1] LINE-FUEL INJECTION (CYL NO. 4)  
28. 336-8178 [1] LINE-FUEL INJECTION (CYL NO. 5)  
29. 336-8179 [1] LINE-FUEL INJECTION (CYL NO. 6)  
30. 278-5180 [2] CLIP  
31. 321-1270 [1] TUBE-OIL  
32. 346-0006 [1] BOLT-SPECIAL  
33. 346-0007 [2] WASHER  
34. 331-7539 [1] CONTROL GP-UNPROGRAMMED  
35. 278-5201 [2] CONNECTION  
36. 228-7100 [2] SEAL-O-RING  
37. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
38. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
39. 155-0576 [8] MOUNT-ISOLATION  
40. 278-5203 [4] SPACER  
41. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
42. 293-9901 [1] BRACKET  
43. 268-6678 [1] BRACKET AS  
43A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
44. 268-6677 [1] BRACKET AS  
44A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
45. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
45A. 199-9267 [1] SEAL-O-RING  
46. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
46A. 274-1639 [1] SEAL  
  238-0120 [1] SENSOR GP-SPEED  
47. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
48. 278-5272 [1] KIT-SENSOR (AIR TEMPERATURE)  
48A. 278-5226 [1] SEAL-O-RING  
49. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
49A. 199-9252 [1] SEAL-O-RING  
50. 278-5307 [1] KIT-SENSOR (WATER TEMPERATURE)  
50A. 199-9267 [1] SEAL-O-RING  
51. 311-6342 [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
51A. 309-8006 [1] WASHER  
52. 280-1892 C [3] BOLT  
53. 1N-3361 C [1] SPACER  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Fuel System Water Separator - Drain
120M and 12M Motor Graders
Special Instruction
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN ADDITIONAL FUEL FILTER ON CERTAIN 12M AND 120M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN ADDITIONAL FUEL FILTER ON CERTAIN 12M AND 120M MOTOR GRADERS
Service Letter-CFEL
Service Letter-Americas
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN ADDITIONAL FUEL FILTER ON CERTAIN 12M AND 120M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN ADDITIONAL FUEL FILTER ON CERTAIN 12M AND 120M MOTOR GRADERS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Manifold (Rail) - Remove and Install
C6.6 Engines for Caterpillar Built Machines
Service Magazine
A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Machine Engines {1261, 1274, 5067}
2010/04/15
Fuel Injection Pump on Certain C6.6 and C6.4 Engines {1251, 1274}
2011/11/23
A Two Piece Clip and Grommet Are Used On the Fuel Lines On Certain Machine Engines {1250, 1250, 7553}
2013/09/02

Caterpillar Parts SIS Catalog 120M :

LINES GP-FUEL
247-4030 LINES GP-FUEL
LINES GP-FUEL
247-4030 LINES GP-FUEL
INJECTOR GP-FUEL
320-0690 INJECTOR GP-FUEL
INJECTOR GP-FUEL
306-9390 INJECTOR GP-FUEL
INJECTOR GP-FUEL
292-3790 INJECTOR GP-FUEL
FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
FILTER GP-SECONDARY FUEL
280-1394 FILTER GP-SECONDARY FUEL
FILTER GP-FUEL
325-3613 FILTER GP-FUEL
LINES GP-FUEL
279-9346 LINES GP-FUEL
LINES GP-FUEL
279-9346 LINES GP-FUEL
MOUNTING GP-FUEL TANK
281-5635 MOUNTING GP-FUEL TANK
PUMP GP-FUEL INJECTION
276-8398 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
303-2929 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
303-2929 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
303-2929 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
303-2929 PUMP GP-FUEL INJECTION

Truck sale:

 
212,000 
Caterpillar 120M2, Construction
- motor graders

Caterpillar 120M2, Construction
317,000 
Caterpillar 120M2, Construction
- motor graders
HOLT CAT
 
On Request 
Caterpillar 120M2, Construction
- motor graders
BERGERAT MONNOYEUR S.A.S.
France
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.