448-4913 CYLINDER GP-RIPPER -LIFT S/N B3Z1-UP 127-MM (5-IN) BORE X 362-MM (14.25-IN) STROKE PART OF 321-5607 RIPPER AR AN ATTACHMENT D6N

HYDRAULIC SYSTEM

CYLINDER GP

0. 448-4913 CYLINDER G
1. 233-9134 CYLINDER G
2. 328-4267 CYLINDER G

FILTER GP

3. 169-4019 FILTER GP-

HYDRAULIC GP

4. 321-8160 HYDRAULIC
5. 310-9950 HYDRAULIC
6. 317-4192 HYDRAULIC
7. 321-8161 HYDRAULIC

LINES GP-CYLINDER

8. 310-4288 LINES GP-A
9. 322-9584 LINES GP-A
0. INFORMATION

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR GHS
D6N XL, LGP Differential Steering, Electrohydraulic Implement TRACK-TYPE TRACTOR GHS00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP5016 D6N GHS (2009)

HYDRAULIC SYSTEM

CYLINDER GP

379-3506 CYLINDER GP-BULLDOZER TILT

325-5723 CYLINDER GP-RIPPER

448-4913 CYLINDER GP-RIPPER

233-9134 CYLINDER GP-TILT

328-4267 CYLINDER GP-TILT

138-7033 MOUNTING GP-CYLINDER

#SEBP50160500

448-4913: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

448-4913 CYLINDER GP-RIPPER -LIFT
S/N B3Z1-UP
127-MM (5-IN) BORE X 362-MM (14.25-IN) STROKE
PART OF 321-5607 RIPPER AR
AN ATTACHMENT

i05946015 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	448-6997	[1]	CYLINDER AS
1A.	4K-3128	[2]	BUSHING
2.	2J-0564	[1]	LOCKNUT (2-12-THD)
3.	3G-1753	[1]	PISTON
4.	4J-3420 J	[1]	RING-WEAR
5.	9X-7264 J	[1]	SEAL AS
6.	3G-1757	[1]	WASHER (50.95X82X12-MM THK)
7.	2K-4096 J	[1]	RING-BACKUP
8.	310-2189	[1]	SEAL-O-RING
9.	230-4872	[1]	HEAD
10.	9T-2714	[1]	ROD AS
10A.	2K-4507	[1]	BUSHING
11.	8T-5668 J	[1]	RING-WEAR
12.	289-2937 J	[1]	SEAL AS-BUFFER
13.	289-2948 J	[1]	SEAL-U-CUP
14.	225-3281 J	[1]	SEAL-WIPER
15.	6V-8237	[4]	WASHER (26X44X4-MM THK)
16.	173-9779 M	[4]	BOLT (M24X3X80-MM)
17.	1P-4576	[4]	FLANGE-HALF
18.	8T-4186 M	[8]	BOLT (M10X1.5X40-MM)
19.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)

			AVAILABLE REPAIR KIT(S):
	242-2542 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP50160501

233-9134: CYLINDER GP-TILT

CYLINDER GP-TILT

233-9134 CYLINDER GP-TILT
S/N S6A1-UP
165.1-MM (6.5-IN) BORE X 128-MM (5.0-IN) STROKE
PART OF 320-5056 PUSH ARM GP
AN ATTACHMENT

i02423029 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1U-4069	[1]	ROD AS
2.	4T-0259	[1]	PISTON
3.	8E-5703	[24]	SHIM (0.8-MM THK)
4.	8J-2880	[1]	CAP AS-BEARING
5.	225-3284	[1]	SEAL-WIPER
6.	233-9135	[1]	CYLINDER AS
6A.	2J-8489	[1]	BEARING
7.	233-9138	[1]	HEAD-CYLINDER
8.	167-2208	[1]	SEAL AS-BUFFER
9.	167-2319	[1]	SEAL-U-CUP
10.	1J-2921	[1]	BOLT (1-1/2-12X3.75-IN)
11.	3J-9703	[1]	RING-WEAR
12.	3S-6162	[1]	WASHER-HARD (40.5X67X6-MM THK)
13.	5J-4991	[1]	SEAL AS
14.	6V-7742 M	[4]	NUT-FULL (M20X2.5-THD)
15.	6V-8133 M	[4]	BOLT (M24X3X80-MM)
16.	6V-8237	[4]	WASHER (26X44X4-MM THK)
17.	6V-9167 M	[4]	BOLT (M20X2.5X140-MM)
18.	7J-8955	[1]	RING-BACKUP
19.	7J-8956	[1]	SEAL-O-RING
20.	8T-8379	[1]	SEAL-HEAD
21.	9T-0094	[1]	RING-WEAR
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP50160502

328-4267: CYLINDER GP-TILT

CYLINDER GP-TILT

328-4267 CYLINDER GP-TILT -BULLDOZER
S/N GHS1-1799; MLW1-1099
139.7-MM (5.5-IN) BORE X 114-MM (4.5-IN) STROKE
PART OF 338-3521, 338-3522 C-FRAME GP-POWER ANGLING
ALSO AN ATTACHMENT

i03514941 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
2.	3J-9545	[1]	LOCKNUT (2-12-THD)
3.	1U-4049	[1]	WASHER (51X73X12.7-MM THK)
4.	160-0060	[1]	PISTON
5.	6E-0465	[1]	SEAL AS
6.	4J-4606	[1]	RING-WEAR
7.	2H-9247	[1]	SEAL-O-RING
8.	2K-2961	[1]	RING-BACKUP
9.	204-9542	[1]	ROD AS
9A.	1S-3311	[1]	RING-RETAINING
9B.	7J-1309	[1]	BEARING
10.	110-4771	[1]	HEAD
11.	328-4266	[1]	CYLINDER AS-HYDRAULIC
11A.	9T-7045	[2]	ELBOW
11B.	8T-7567	[1]	RING-RETAINING (INTERNAL)
11C.	160-0305	[1]	BEARING
12.	225-3281	[1]	SEAL-WIPER
13.	167-2312	[1]	SEAL-U-CUP
14.	167-2201	[1]	SEAL AS-BUFFER
15.	8T-5668	[1]	RING-WEAR
16.	329-5398	[1]	CROWN

#SEBP50160503

169-4019: FILTER GP-OIL

FILTER GP-OIL

169-4019 FILTER GP-OIL -IMPLEMENT-CASE DRAIN
S/N GHS1-UP; MLW1-UP
PART OF 311-1991 LINES GP-PUMP
ALSO AN ATTACHMENT

i01434594 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-8578	[1]	FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)
			-OR-
	144-0832 A	[1]	FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC)
	A		NOT PART OF THIS GROUP

#SEBP50160504

321-8160: HYDRAULIC AR-2 VALVE

HYDRAULIC AR-2 VALVE

321-8160 HYDRAULIC AR-2 VALVE
S/N GHS1-UP; MLW1-UP
FOR USE WITH SEMI-UNIVERSAL BULLDOZER
CANNOT BE USED WITH COVER GP-CONSOLE (RIPPER), RIPPER
AN ATTACHMENT

i03963491 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
319-5955 Y	[1]	CONTROL GP-JOYSTICK (BULLDOZER)
322-6635 Y	[1]	LINES GP-TILT CYLINDER
		S/N GHS1-291; MLW1-158
346-1738 Y	[1]	LINES GP-TILT CYLINDER
		S/N GHS292-UP; MLW159-UP

	[2]	PLUG AS
		(EACH INCLUDES)
3D-2824	[1]	SEAL-O-RING
9S-4183	[1]	PLUG (1-1/16-12-THD)
Y		SEPARATE ILLUSTRATION

#SEBP50160505

310-9950: HYDRAULIC AR-3 VALVE

HYDRAULIC AR-3 VALVE

310-9950 HYDRAULIC AR-3 VALVE
S/N GHS1-UP; MLW1-UP
PART OF 310-9903, 310-9904 GENERAL AR
ALSO AN ATTACHMENT

i03547642 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
310-4288 Y	[1]	LINES GP-ANGLE & TILT
310-6370 Y	[1]	LINES GP-DIAGNOSTIC (REMOTE PRESSURE TAPS)
310-4600 Y	[1]	LINES GP-LIFT CYLINDER
317-7820 Y	[1]	LINES GP-PILOT
311-1991 Y	[1]	LINES GP-PUMP
311-1992 Y	[1]	LINES GP-STEERING
309-1916 Y	[1]	MOTOR GP-PISTON (STEERING)(STEERING)
311-1993 Y	[1]	PLATE GP-MOUNTING
320-8637 Y	[1]	PUMP GP-PISTON (STEERING)(STEERING)
230-9131 Y	[1]	TANK & FILTER GP-HYDRAULIC
309-1573 Y	[1]	VALVE GP-BANK 3 (BULLDOZER)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP50160506

317-4192: HYDRAULIC AR-4 VALVE

HYDRAULIC AR-4 VALVE

317-4192 HYDRAULIC AR-4 VALVE
S/N GHS1-UP; MLW1-UP
PART OF 338-2570, 339-9623, 339-9624 OPTION AR-HYDRAULIC
FOR USE WITH COVER GP-CONSOLE (RIPPER), RIPPER, COVER GP-CONSOLE (RIPPER, WINCH)
CANNOT BE USED WITH COVER GP-CONSOLE (WINCH)
AN ATTACHMENT

i03562340 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
298-4372 Y	[1]	CONTROL GP-JOYSTICK (RIPPER)
311-2848 Y	[1]	LINES GP-PILOT
311-0225 Y	[1]	LINES GP-RIPPER
309-1574 Y	[1]	VALVE GP-BANK 4 (BULLDOZER, RIPPER)
Y		SEPARATE ILLUSTRATION

#SEBP50160507

321-8161: HYDRAULIC AR-4 VALVE

HYDRAULIC AR-4 VALVE

321-8161 HYDRAULIC AR-4 VALVE
S/N GHS1-UP; MLW1-UP
PART OF 342-2615 OPTION AR-BULLDOZER
FOR USE WITH SEMI-UNIVERSAL BULLDOZER, COVER GP-CONSOLE (RIPPER), COVER GP-CONSOLE (RIPPER, WINCH)
CANNOT BE USED WITH COVER GP-CONSOLE (WINCH)
AN ATTACHMENT

i03963531 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
319-5955 Y	[1]	CONTROL GP-JOYSTICK (BULLDOZER)
298-4372 Y	[1]	CONTROL GP-JOYSTICK (RIPPER)
311-2848 Y	[1]	LINES GP-PILOT
311-0225 Y	[1]	LINES GP-RIPPER
322-6635 Y	[1]	LINES GP-TILT CYLINDER
		S/N GHS1-291; MLW1-158
346-1738 Y	[1]	LINES GP-TILT CYLINDER
		S/N GHS292-UP; MLW159-UP
309-1574 Y	[1]	VALVE GP-BANK 4 (BULLDOZER, RIPPER)

	[2]	PLUG AS
		(EACH INCLUDES)
3D-2824	[1]	SEAL-O-RING
9S-4183	[1]	PLUG (1-1/16-12-THD)
Y		SEPARATE ILLUSTRATION

#SEBP50160508

310-4288: LINES GP-ANGLE & TILT

LINES GP-ANGLE & TILT

310-4288 LINES GP-ANGLE & TILT
S/N GHS1-UP; MLW1-UP
PART OF 310-9950 HYDRAULIC AR-3 VALVE
ALSO AN ATTACHMENT

i03549400 SEBP5016

3104288 LINES GP-ANGLE & TILT Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	273-8326	[1]	TUBE AS
2.	273-8327	[1]	TUBE AS
3.	273-8328	[1]	TUBE AS
4.	273-8329	[1]	TUBE AS
5.	273-8330	[1]	TUBE AS
6.	273-8331	[1]	TUBE AS
7.	310-4284	[1]	TUBE AS
8.	310-4285	[1]	TUBE AS
9.	310-4286	[1]	TUBE AS
10.	310-4287	[1]	TUBE AS
11.	357-4378	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8637	[1]	CONNECTOR
	6V-9746	[1]	SEAL-O-RING
12.	360-3556	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-9162	[1]	CONNECTOR
	6V-9746	[1]	SEAL-O-RING
13.	5K-2697	[4]	CLIP
14.	6V-8398	[6]	SEAL-O-RING
15.	6V-9169	[6]	NUT (13/16-16-THD)
16.	6V-9746	[2]	SEAL-O-RING
17.	7J-9108	[4]	SEAL-O-RING
18.	7W-0534	[2]	WASHER (10.3X22.2X4-MM THK)
19.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4133 M	[3]	NUT (M10X1.5-THD)
21.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
22.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
23.	9M-8406	[5]	CLIP (LOOP)
24.	9R-1004	[2]	CLIP (TAB)
25.	9R-1005	[2]	CLIP (SLOT)
26.	6K-8178	[1]	CLIP (LOOP)
	M		METRIC PART

#SEBP50160509

322-9584: LINES GP-ANGLE & TILT

LINES GP-ANGLE & TILT

322-9584 LINES GP-ANGLE & TILT
S/N MLW1-1099
PART OF 338-3521 C-FRAME GP-POWER ANGLING

i03565214 SEBP5016

3229584 LINES GP-ANGLE & TILT Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	112-7455 I	[2]	HOSE AS
2.	197-2477	[2]	PIN
3.	262-0649 I	[2]	HOSE AS
4.	292-9380	[1]	GUARD AS
5.	294-5374	[2]	PLATE
6.	294-7277	[2]	GUARD AS
7.	294-7278	[2]	PLATE
8.	295-2151	[1]	CHANNEL AS (RH)
9.	295-2152	[1]	CHANNEL AS (LH)
10.	306-8866	[2]	BAFFLE AS
			(EACH INCLUDES)
	7G-5186	[4]	SPACER (13X19X4.5-MM THK)
11.	324-0566	[2]	PLATE
12.	096-7033	[2]	PIN-COTTER
13.	357-4371	[4]	CONNECTOR AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-8639	[1]	CONNECTOR
14.	357-4437	[2]	ELBOW AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-8625	[1]	ELBOW
15.	3B-6552	[2]	ELBOW-PIPE
16.	3B-8489	[10]	FITTING-GREASE (1/8-27 PTF)
17.	5P-7464	[2]	CLIP (SLOT)
18.	5P-7465	[2]	CLIP (TAB)
19.	5P-7466	[6]	CLIP (SLOT)
20.	5P-7467	[6]	CLIP (TAB)
21.	5P-8112	[6]	GROMMET
22.	6V-1249	[2]	GROMMET (22-MM ID)
23.	6V-7687 M	[6]	LOCKNUT (M12X1.75-THD)
24.	6V-8398	[6]	SEAL-O-RING
25.	7G-3832	[2]	GROMMET
26.	7G-3833	[2]	CLIP (TAB)
27.	7G-3834	[2]	CLIP (SLOT)
28.	7X-7729	[4]	WASHER (11X25X3-MM THK)
29.	7Y-1858	[2]	WASHER (21X37X3-MM THK)
30.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4133 M	[4]	NUT (M10X1.5-THD)
32.	8T-4136 M	[8]	BOLT (M10X1.5X25-MM)
33.	8T-4139 M	[10]	BOLT (M12X1.75X30-MM)
34.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
35.	8T-4184 M	[6]	BOLT (M12X1.75X45-MM)
36.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
37.	8T-4194 M	[1]	BOLT (M12X1.75X50-MM)
38.	8T-4223	[23]	WASHER-HARD (13.5X25.5X3-MM THK)
39.	8T-4244 M	[2]	NUT (M12X1.75-THD)
40.	197-2479 I	[2]	HOSE AS-GREASE
41.	310-1502 I	[2]	HOSE AS
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART