AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

322-9585 LINES GP-ANGLE & TILT S/N GHS1-1799; MLW1-UP PART OF 338-3522 C-FRAME GP-POWER ANGLING ALSO AN ATTACHMENT D6N


HYDRAULIC SYSTEM
LINES GP-CYLINDER

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR GHS
 D6N XL, LGP Differential Steering, Electrohydraulic Implement TRACK-TYPE TRACTOR GHS00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP5016 D6N GHS   (2009)

HYDRAULIC SYSTEM

LINES GP-CYLINDER
LINES GP-ANGLE & TILT
310-4288 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
322-9584 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
322-9585 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
324-0558 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
324-0559 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4928 LINES GP-ANGLE & TILT
 

#SEBP50160510
 

322-9585: LINES GP-ANGLE & TILT

322-9585 LINES GP-ANGLE & TILT
S/N GHS1-1799; MLW1-UP
PART OF 338-3522 C-FRAME GP-POWER ANGLING
ALSO AN ATTACHMENT
i03565216 SEBP5016
3229585 LINES GP-ANGLE & TILT Parts scheme 3229585 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [10] FITTING-GREASE (1/8-27 PTF)  
2. 114-6436 I [2] HOSE AS  
3. 197-2477 [2] PIN  
4. 197-2479 I [2] HOSE AS-GREASE  
5. 262-0647 I [2] HOSE AS  
6. 292-9380 [1] GUARD AS  
7. 294-5374 [2] PLATE  
8. 294-7277 [2] GUARD AS  
9. 294-7278 [2] PLATE  
10. 295-2151 [1] CHANNEL AS (RH)  
11. 295-2152 [1] CHANNEL AS (LH)  
12. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
13. 324-3403 [1] PLATE  
14. 324-3404 [1] PLATE  
15. 324-9469 [2] PLATE  
16. 357-4371 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
17. 357-4437 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
18. 096-7033 [2] PIN-COTTER  
19. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
20. 3B-6552 [2] ELBOW-PIPE  
21. 5P-7464 [2] CLIP (SLOT)  
22. 5P-7465 [2] CLIP (TAB)  
23. 5P-7466 [6] CLIP (SLOT)  
24. 5P-7467 [6] CLIP (TAB)  
25. 5P-8112 [6] GROMMET  
26. 6V-1249 [2] GROMMET (22-MM ID)  
27. 6V-7687 M [6] LOCKNUT (M12X1.75-THD)  
28. 6V-8398 [6] SEAL-O-RING  
29. 7G-3832 [2] GROMMET  
30. 7G-3833 [2] CLIP (TAB)  
31. 7G-3834 [2] CLIP (SLOT)  
32. 7X-7729 [6] WASHER (11X25X3-MM THK)  
33. 7Y-1858 [2] WASHER (21X37X3-MM THK)  
34. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [4] NUT (M10X1.5-THD)  
36. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
37. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
38. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
39. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
40. 8T-4184 M [6] BOLT (M12X1.75X45-MM)  
41. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
42. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
43. 8T-4223 [23] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4244 M [2] NUT (M12X1.75-THD)  
45. 310-1503 I [2] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP50160511
 

324-0558: LINES GP-ANGLE & TILT

324-0558 LINES GP-ANGLE & TILT
S/N MLW1-UP
PART OF 323-9294 GUARD GP-LINES
AN ATTACHMENT
i03566149 SEBP5016
3240558 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [10] FITTING-GREASE (1/8-27 PTF)  
2. 112-7455 I [2] HOSE AS  
3. 197-2477 [4] PIN  
4. 271-2038 [2] TUBE AS  
5. 273-3776 [1] CHANNEL AS (RH)  
6. 273-3777 [1] CHANNEL AS (LH)  
7. 274-3484 [1] PLATE (LH)  
8. 274-3485 [1] PLATE (RH)  
9. 292-9380 [1] GUARD AS  
10. 294-5374 [4] PLATE  
11. 294-7277 [2] GUARD AS  
12. 294-7278 [4] PLATE  
13. 306-8866 [4] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
14. 310-1502 I [2] HOSE AS  
15. 322-9605 [1] COVER AS (RH)  
16. 322-9606 [1] COVER AS (RH)  
17. 322-9607 [1] COVER AS (LH)  
18. 322-9608 [1] COVER AS (LH)  
19. 096-7033 [4] PIN-COTTER  
20. 357-4371 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
21. 357-4437 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
22. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
23. 3B-6552 [2] ELBOW-PIPE  
24. 5P-7466 [4] CLIP (SLOT)  
25. 5P-7467 [4] CLIP (TAB)  
26. 5P-8112 [4] GROMMET  
27. 6V-7687 M [4] LOCKNUT (M12X1.75-THD)  
28. 6V-8398 [10] SEAL-O-RING  
29. 7G-3832 [2] GROMMET  
30. 7G-3833 [2] CLIP (TAB)  
31. 7G-3834 [2] CLIP (SLOT)  
32. 7X-7729 [8] WASHER (11X25X3-MM THK)  
33. 7Y-1858 [6] WASHER (21X37X3-MM THK)  
34. 8T-1887 [8] CLIP (SLOT)  
35. 8T-1888 [8] CLIP (TAB)  
36. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [8] NUT (M10X1.5-THD)  
38. 8T-4136 M [16] BOLT (M10X1.5X25-MM)  
39. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
40. 8T-4139 M [14] BOLT (M12X1.75X30-MM)  
41. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
42. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
43. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
44. 8T-4223 [17] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 197-2479 I [2] HOSE AS-GREASE  
46. 271-2039 I [2] HOSE AS  
47. 271-2040 I [2] HOSE AS  
48. 202-5293 H SEAL (4-DM EACH)  
  H   SOLD BY THE DECIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP50160512
 

324-0559: LINES GP-ANGLE & TILT

324-0559 LINES GP-ANGLE & TILT
S/N GHS1-UP; MLW1-UP
PART OF 323-9296 GUARD GP-LINES
AN ATTACHMENT
i03566360 SEBP5016
3240559 LINES GP-ANGLE & TILT Parts scheme 3240559 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [10] FITTING-GREASE (1/8-27 PTF)  
2. 114-6436 I [2] HOSE AS  
3. 197-2477 [4] PIN  
4. 197-2479 I [2] HOSE AS-GREASE  
5. 268-2744 [2] TUBE AS  
6. 273-3776 [1] CHANNEL AS (RH)  
7. 273-3777 [1] CHANNEL AS (LH)  
8. 274-3484 [1] PLATE (LH)  
9. 274-3485 [1] PLATE (RH)  
10. 292-9380 [1] GUARD AS  
11. 294-5374 [4] PLATE  
12. 294-7277 [2] GUARD AS  
13. 294-7278 [4] PLATE  
14. 306-8866 [4] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
15. 310-1503 I [2] HOSE AS  
16. 322-9605 [1] COVER AS (RH)  
17. 322-9607 [1] COVER AS (LH)  
18. 323-9297 [1] COVER AS (LH)  
19. 323-9298 [1] COVER AS (RH)  
20. 096-7033 [4] PIN-COTTER  
21. 357-4371 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
22. 357-4437 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
23. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
24. 3B-6552 [2] ELBOW-PIPE  
25. 5P-7466 [4] CLIP (SLOT)  
26. 5P-7467 [4] CLIP (TAB)  
27. 5P-8112 [4] GROMMET  
28. 6V-7687 M [4] LOCKNUT (M12X1.75-THD)  
29. 6V-8398 [10] SEAL-O-RING  
30. 7G-3832 [2] GROMMET  
31. 7G-3833 [2] CLIP (TAB)  
32. 7G-3834 [2] CLIP (SLOT)  
33. 7X-7729 [8] WASHER (11X25X3-MM THK)  
34. 7Y-1858 [6] WASHER (21X37X3-MM THK)  
35. 8T-1887 [8] CLIP (SLOT)  
36. 8T-1888 [8] CLIP (TAB)  
37. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [8] NUT (M10X1.5-THD)  
39. 8T-4136 M [16] BOLT (M10X1.5X25-MM)  
40. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
41. 8T-4139 M [14] BOLT (M12X1.75X30-MM)  
42. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
45. 8T-4223 [17] WASHER-HARD (13.5X25.5X3-MM THK)  
46. 268-2742 I [2] HOSE AS  
47. 271-2040 I [2] HOSE AS  
48. 202-5293 H SEAL (4-DM EACH)  
  H   ORDER BY THE DECIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP50160513
 

361-4928: LINES GP-ANGLE & TILT

361-4928 LINES GP-ANGLE & TILT
S/N MLW1100-UP
PART OF 435-1882 BULLDOZER AR
CANNOT BE USED WITH SEMI-UNIVERSAL BULLDOZER
i04647890 SEBP5016
3614928 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [2] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 357-4371 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4934 [1] CHANNEL AS (RH)  
8. 361-4935 [1] CHANNEL AS (LH)  
9. 361-4939 I [2] HOSE AS  
10. 361-4940 I [2] HOSE AS  
11. 361-4941 I [1] HOSE AS  
12. 371-4000 I [1] HOSE AS  
13. 387-5239 [2] GUARD AS  
14. 3B-6552 [2] ELBOW-PIPE  
15. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
16. 3G-8047 [2] GROMMET  
17. 3G-8054 [2] CLIP (TAB)  
18. 3G-8057 [2] CLIP (SLOT)  
19. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
20. 5P-7464 [6] CLIP (SLOT)  
21. 5P-7465 [6] CLIP (TAB)  
22. 6V-1249 [6] GROMMET (22-MM ID)  
23. 6V-8398 [6] SEAL-O-RING  
24. 7C-4354 [4] CLIP  
25. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [6] NUT (M10X1.5-THD)  
27. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
28. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
29. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
30. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
31. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
32. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4244 M [2] NUT (M12X1.75-THD)  
34. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
35. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 096-7033 [2] PIN-COTTER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP50160514
 

361-4928: LINES GP-ANGLE & TILT

361-4928 LINES GP-ANGLE & TILT
S/N MLW1-UP
PART OF 435-1882 BULLDOZER AR
CANNOT BE USED WITH SEMI-UNIVERSAL BULLDOZER
i05591540 SEBP5016
3614928 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [2] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 148-8340 C [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4934 [1] CHANNEL AS (RH)  
8. 361-4935 [1] CHANNEL AS (LH)  
9. 361-4939 CI [2] HOSE AS  
10. 361-4940 I [2] HOSE AS  
11. 361-4941 I [1] HOSE AS  
12. 371-4000 I [1] HOSE AS  
13. 387-5239 [2] GUARD AS  
14. 3B-6552 [2] ELBOW-PIPE  
15. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
16. 3G-8047 [2] GROMMET  
17. 3G-8054 [2] CLIP (TAB)  
18. 3G-8057 [2] CLIP (SLOT)  
19. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
20. 5P-7464 [6] CLIP (SLOT)  
21. 5P-7465 [6] CLIP (TAB)  
22. 6V-1249 [6] GROMMET (22-MM ID)  
23. 6V-8398 [6] SEAL-O-RING  
25. 8T-4121 C [14] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 CM [4] NUT (M10X1.5-THD)  
27. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
28. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
30. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
31. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
32. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4244 M [2] NUT (M12X1.75-THD)  
34. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
35. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 5P-0370 C [2] LOCK PIN  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP50160515
 

361-4929: LINES GP-ANGLE & TILT

361-4929 LINES GP-ANGLE & TILT
S/N GHS1800-UP
PART OF 435-1883 BULLDOZER AR
i04611049 SEBP5016
3614929 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [2] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 357-4371 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4934 [1] CHANNEL AS (RH)  
8. 361-4935 [1] CHANNEL AS (LH)  
9. 361-4936 [2] CHANNEL AS  
10. 361-4942 I [2] HOSE AS  
11. 361-4943 I [2] HOSE AS  
12. 361-4944 I [1] HOSE AS  
13. 371-4001 I [1] HOSE AS  
14. 3B-6552 [2] ELBOW-PIPE  
15. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
16. 3G-8047 [2] GROMMET  
17. 3G-8054 [2] CLIP (TAB)  
18. 3G-8057 [2] CLIP (SLOT)  
19. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
20. 5P-7464 [6] CLIP (SLOT)  
21. 5P-7465 [6] CLIP (TAB)  
22. 6V-1249 [6] GROMMET (22-MM ID)  
23. 6V-8398 [6] SEAL-O-RING  
24. 7C-4354 [4] CLIP  
25. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [6] NUT (M10X1.5-THD)  
27. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
28. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
29. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
30. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
31. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
32. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4244 M [2] NUT (M12X1.75-THD)  
34. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
35. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 096-7033 [2] PIN-COTTER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP50160516
 

361-4929: LINES GP-ANGLE & TILT

361-4929 LINES GP-ANGLE & TILT
S/N GHS1800-UP
PART OF 435-1883 BULLDOZER AR
ALSO AN ATTACHMENT
i05591551 SEBP5016
3614929 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [2] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 148-8340 C [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4934 [1] CHANNEL AS (RH)  
8. 361-4935 [1] CHANNEL AS (LH)  
9. 361-4936 [2] CHANNEL AS  
10. 361-4942 CI [2] HOSE AS  
11. 361-4943 I [2] HOSE AS  
12. 361-4944 I [1] HOSE AS  
13. 371-4001 I [1] HOSE AS  
14. 3B-6552 [2] ELBOW-PIPE  
15. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
16. 3G-8047 [2] GROMMET  
17. 3G-8054 [2] CLIP (TAB)  
18. 3G-8057 [2] CLIP (SLOT)  
19. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
20. 5P-7464 [6] CLIP (SLOT)  
21. 5P-7465 [6] CLIP (TAB)  
22. 6V-1249 [6] GROMMET (22-MM ID)  
23. 6V-8398 [6] SEAL-O-RING  
25. 8T-4121 C [14] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 CM [4] NUT (M10X1.5-THD)  
27. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
28. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
30. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
31. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
32. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4244 M [2] NUT (M12X1.75-THD)  
34. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
35. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 5P-0370 C [2] LOCK PIN  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP50160517
 

446-7054: LINES GP-ANGLE & TILT

446-7054 LINES GP-ANGLE & TILT
S/N MLW1-UP
CANNOT BE USED WITH SEMI-UNIVERSAL DOZER
AN ATTACHMENT
i05523810 SEBP5016
4467054 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [2] PIN  
2. 361-4930 [1] COVER  
3. 361-4931 [1] COVER  
4. 452-9237 [1] COVER AS (LH)  
5. 452-9239 [1] COVER AS (RH)  
6. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
7. 5P-0370 [2] LOCK PIN  
8. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
9. 8T-4994 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
10. 202-5293 H SEAL (3.5-DM EACH)  
  H   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP50160518
 

220-0897: LINES GP-LIFT CYLINDER

220-0897 LINES GP-LIFT CYLINDER
S/N GHS1-1799; MLW1-1099
PART OF 338-3521, 338-3522 C-FRAME GP-POWER ANGLING
ALSO AN ATTACHMENT
i03281876 SEBP5016
2200897 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 294-9969 [2] BRACKET AS  
2. 314-9391 C [2] TUBE AS  
3. 314-9392 CI [2] HOSE AS  
4. 357-4375 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8713 [1] CONNECTOR  
  3D-2824 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
5. 357-4444 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-9007 [1] ELBOW  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
6. 220-0906 CI [2] HOSE AS  
7. 6V-9746 C [2] SEAL-O-RING  
8. 8T-1887 [2] CLIP (SLOT)  
9. 8T-1888 [2] CLIP (TAB)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [2] NUT (M10X1.5-THD)  
12. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP50160519
 

271-8871: LINES GP-LIFT CYLINDER

271-8871 LINES GP-LIFT CYLINDER
S/N S6A1-UP
PART OF 273-0030 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i02554972 SEBP5016
2718871 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8341 [4] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8713 [1] CONNECTOR  
  3D-2824 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
2. 272-1387 I [2] HOSE AS  
3. 272-1388 I [2] HOSE AS  
4. 5P-7464 [4] CLIP (SLOT)  
5. 5P-7465 [4] CLIP (TAB)  
6. 5P-7468 [2] CLIP (SLOT)  
7. 5P-7469 [2] CLIP (TAB)  
8. 6V-7359 [4] GROMMET (25-MM ID, 37-MM OD)  
9. 7G-3833 [2] CLIP (TAB)  
10. 7G-3834 [2] CLIP (SLOT)  
11. 8C-3174 [2] GROMMET  
12. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
14. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
15. 329-3356 M [4] NUT (M12X1.75-THD)  
16. 7X-3392 [8] WASHER-HARD (13.5X22.5X3-MM THK)  
17. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D6N :

LINES GP-ANGLE & TILT
322-9584 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
310-4288 LINES GP-ANGLE & TILT
321-8161 HYDRAULIC AR-4 VALVE
317-4192 HYDRAULIC AR-4 VALVE
310-9950 HYDRAULIC AR-3 VALVE
321-8160 HYDRAULIC AR-2 VALVE
FILTER GP-OIL
169-4019 FILTER GP-OIL
CYLINDER GP-TILT
328-4267 CYLINDER GP-TILT
LINES GP-ANGLE & TILT
324-0558 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
324-0559 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4928 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4928 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4929 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4929 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
446-7054 LINES GP-ANGLE & TILT
LINES GP-LIFT CYLINDER
220-0897 LINES GP-LIFT CYLINDER

Truck sale:

 
 
Caterpillar D6N
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6NL AZ2, Crawler dozers, Construction
152,512 
Caterpillar D6NL AZ2, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D6N, Crawler dozers, Construction
139,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
110,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6N, Crawler dozers, Construction
 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.