273-0030 BULLDOZER AR-SEMI-UNIVERSAL S/N S6A1-UP PART OF 342-2615 OPTION AR-BULLDOZER Type 1 FOR USE WITH @@@@@273-9852@@@@@, @@@@@274-5590@@@@@, @@@@@273-9851@@@@@, @@@@@321-8160@@@@@, WITHOUT SOUND SUPPRESSION, WITHOUT SOUND SUPPRESSION, WITH SOUND SUPPRESSION, HYDRAULIC AR-2 VALVE, WHEN MACHINE IS NOT RIPPER READY CANNOT BE USED WITH GRADE CONTROL AR AN ATTACHMENT D6N

IMPLEMENTS

BULLDOZER GP

0. 273-0030 BULLDOZER
1. 273-0030 BULLDOZER

C-FRAME GP

2. 359-3350 C-FRAME AR
3. 321-5602 C-FRAME GP
4. 321-5603 C-FRAME GP
5. 338-3521 C-FRAME GP
6. 338-3521 C-FRAME GP
7. 338-3522 C-FRAME GP
8. 338-3522 C-FRAME GP
9. 358-2190 C-FRAME GP
0. INFORMATION

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR GHS
D6N XL, LGP Differential Steering, Electrohydraulic Implement TRACK-TYPE TRACTOR GHS00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP5016 D6N GHS (2009)

IMPLEMENTS

BULLDOZER GP

435-1882 BULLDOZER AR

435-1883 BULLDOZER AR

273-0030 BULLDOZER AR-SEMI-UNIVERSAL

190-5328 LINK GP-PITCH

348-6250 LINK GP-PITCH

#SEBP50160570

273-0030: BULLDOZER AR-SEMI-UNIVERSAL

BULLDOZER AR-SEMI-UNIVERSAL

273-0030 BULLDOZER AR-SEMI-UNIVERSAL
S/N S6A1-UP
PART OF 342-2615 OPTION AR-BULLDOZER
Type 1
FOR USE WITH @@@@@273-9852@@@@@, @@@@@274-5590@@@@@, @@@@@273-9851@@@@@, @@@@@321-8160@@@@@, WITHOUT SOUND SUPPRESSION, WITHOUT SOUND SUPPRESSION, WITH SOUND SUPPRESSION, HYDRAULIC AR-2 VALVE, WHEN MACHINE IS NOT RIPPER READY
CANNOT BE USED WITH GRADE CONTROL AR
AN ATTACHMENT

i03149970 SEBP5016

2730030 BULLDOZER AR-SEMI-UNIVERSAL Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	320-5056 Y	[1]	PUSH ARM GP
2.	115-4594 Y	[1]	BLADE & EDGE GP-SEMI-UNIVERSAL
3.	138-7033 Y	[1]	MOUNTING GP-CYLINDER
4.	319-7125 CY	[1]	TRUNNION GP-BULLDOZER
5.	271-8871 Y	[1]	LINES GP-LIFT CYLINDER
6.	320-5928 Y	[1]	LINES GP-TILT CYLINDER
7.	275-8416 Y	[2]	CYLINDER GP-BULLDOZER LIFT
8.	6V-5344	[1]	PLATE & FILM GP
	8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
			(ON UPPER RH CORNER OF BLADE)
	4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP50160571

273-0030: BULLDOZER AR-SEMI-UNIVERSAL

BULLDOZER AR-SEMI-UNIVERSAL

273-0030 BULLDOZER AR-SEMI-UNIVERSAL
S/N S6A1-UP
PART OF 342-2615 OPTION AR-BULLDOZER
Type 2
FOR USE WITH @@@@@273-9852@@@@@, @@@@@274-5590@@@@@, @@@@@273-9851@@@@@, @@@@@321-8160@@@@@, WITHOUT SOUND SUPPRESSION, WITHOUT SOUND SUPPRESSION, WITH SOUND SUPPRESSION, HYDRAULIC AR-2 VALVE, WHEN MACHINE IS NOT RIPPER READY
CANNOT BE USED WITH GRADE CONTROL AR
AN ATTACHMENT

i03988229 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	320-5056 Y	[1]	PUSH ARM GP
2.	115-4594 Y	[1]	BLADE & EDGE GP-SEMI-UNIVERSAL
3.	138-7033 Y	[1]	MOUNTING GP-CYLINDER
4.	319-7125 Y	[1]	TRUNNION GP-BULLDOZER
5.	271-8871 Y	[1]	LINES GP-LIFT CYLINDER
6.	346-1721 CY	[1]	LINES GP-TILT CYLINDER
7.	275-8416 Y	[2]	CYLINDER GP-BULLDOZER LIFT
8.	6V-5344	[1]	PLATE & FILM GP
	8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
			(ON UPPER RH CORNER OF BLADE)
	4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP50160572

359-3350: C-FRAME AR

C-FRAME AR

359-3350 C-FRAME AR
S/N GHS1800-UP
PART OF 435-1883 BULLDOZER AR
ALSO AN ATTACHMENT

i04642450 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	107-8126	[2]	BEARING
2.	134-6775 Y	[1]	PIN GP-CYLINDER (BULLDOZER)
3.	348-6250 Y	[1]	LINK GP-PITCH
4.	359-3360 Y	[1]	C-FRAME GP-POWER ANGLING
5.	362-1055 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
6.	379-3506 Y	[1]	CYLINDER GP-BULLDOZER TILT
7.	379-3507 Y	[2]	CYLINDER GP-ANGLING
8.	379-3508 Y	[2]	CYLINDER GP-BULLDOZER LIFT
9.	109-0959	[4]	RING
	Y		SEPARATE ILLUSTRATION

#SEBP50160573

321-5602: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

321-5602 C-FRAME GP-POWER ANGLING
S/N MLW1-1099
PART OF 338-3521 C-FRAME GP-POWER ANGLING

i03565263 SEBP5016

3215602 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	4Y-4905 B	[6]	WASHER (79X175X2-MM THK)
2.	8G-5747	[6]	SPACER (45X50X15-MM THK)
3.	8T-1482	[4]	WASHER-HARD (26X50X8-MM THK)
4.	089-8249	[2]	SPACER (64X72X13-MM THK)
5.	104-4817	[1]	PIN
6.	104-7391	[1]	CAP
7.	104-7434	[1]	RETAINER
8.	105-2058	[1]	BRACKET AS
9.	110-5217	[2]	PLATE
10.	104-7498	[2]	RETAINER
11.	124-5234	[4]	RETAINER
12.	124-5235 B	[6]	SHIM (0.8-MM THK)
13.	124-5741	[4]	PIN
14.	145-0803	[1]	PIN
15.	160-5691	[1]	PIN
16.	161-2113	[1]	SPACER (60X89.8X231-MM THK)
17.	298-2764 M	[4]	BOLT (M24X3X190-MM)
18.	321-5604	[1]	FRAME AS
19.	104-4746	[2]	DOWEL
20.	108-5794	[4]	PLUG-PIPE
21.	109-0958	[2]	PIN
22.	7X-2562 M	[5]	BOLT (M20X2.5X45-MM)
23.	8T-4123	[3]	WASHER (22X35X3.5-MM THK)
24.	8T-4139 M	[12]	BOLT (M12X1.75X30-MM)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP50160574

321-5603: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

321-5603 C-FRAME GP-POWER ANGLING
S/N GHS1-1799; MLW1-UP
PART OF 338-3522 C-FRAME GP-POWER ANGLING
ALSO AN ATTACHMENT

i03565261 SEBP5016

3215603 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	4Y-4905 B	[6]	WASHER (79X175X2-MM THK)
2.	8G-5747	[6]	SPACER (45X50X15-MM THK)
3.	8T-1482	[4]	WASHER-HARD (26X50X8-MM THK)
4.	089-8249	[2]	SPACER (64X72X13-MM THK)
5.	104-4817	[1]	PIN
6.	104-7391	[1]	CAP
7.	104-7434	[1]	RETAINER
8.	105-2058	[1]	BRACKET AS
9.	110-5217	[2]	PLATE
10.	104-7498	[2]	RETAINER
11.	124-5234	[4]	RETAINER
12.	124-5235 B	[6]	SHIM (0.8-MM THK)
13.	124-5741	[4]	PIN
14.	145-0803	[1]	PIN
15.	160-5691	[1]	PIN
16.	161-2113	[1]	SPACER (60X89.8X231-MM THK)
17.	298-2764 M	[4]	BOLT (M24X3X190-MM)
18.	321-5599	[1]	FRAME AS
19.	104-4746	[2]	DOWEL
20.	108-5794	[4]	PLUG-PIPE
21.	109-0958	[2]	PIN
22.	7X-2562 M	[5]	BOLT (M20X2.5X45-MM)
23.	8T-4123	[3]	WASHER (22X35X3.5-MM THK)
24.	8T-4139 M	[12]	BOLT (M12X1.75X30-MM)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP50160575

338-3521: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

338-3521 C-FRAME GP-POWER ANGLING
S/N MLW1-341
PART OF 338-8038 BULLDOZER AR

i03565185 SEBP5016

3383521 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	107-8126	[2]	BEARING
2.	110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
3.	134-6775 Y	[1]	PIN GP-CYLINDER (BULLDOZER)
4.	190-5328 Y	[1]	LINK GP-PITCH
5.	220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
6.	242-5055	[2]	FILM-WARNING (NO STEP)
7.	321-5602 Y	[1]	C-FRAME GP-POWER ANGLING
8.	321-7048 Y	[2]	CYLINDER GP-ANGLING (BULLDOZER)
9.	322-9584 Y	[1]	LINES GP-ANGLE & TILT
10.	328-4267 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
11.	109-0959	[4]	RING
	Y		SEPARATE ILLUSTRATION

#SEBP50160576

338-3521: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

338-3521 C-FRAME GP-POWER ANGLING
S/N MLW342-1099
PART OF 338-8038 BULLDOZER AR

i04788316 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	107-8126	[2]	BEARING
2.	110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
3.	134-6775 Y	[1]	PIN GP-CYLINDER (BULLDOZER)
4.	190-5328 Y	[1]	LINK GP-PITCH
5.	220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
6.	242-5055	[2]	FILM-WARNING (NO STEP)
7.	321-5602 Y	[1]	C-FRAME GP-POWER ANGLING
8.	358-6503 CY	[2]	CYLINDER GP-ANGLING (BULLDOZER)
9.	322-9584 Y	[1]	LINES GP-ANGLE & TILT
10.	328-4267 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
11.	109-0959	[4]	RING
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP50160577

338-3522: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

338-3522 C-FRAME GP-POWER ANGLING
S/N GHS1-358; MLW1-341
PART OF 338-8039 BULLDOZER AR, 357-5902 GRADER AR-FINE, 338-2607 OPTION AR-GRADE CONTROL
ALSO AN ATTACHMENT

i03565186 SEBP5016

3383522 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	107-8126	[2]	BEARING
2.	110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
3.	134-6775 Y	[1]	PIN GP-CYLINDER
4.	190-5328 Y	[1]	LINK GP-PITCH
5.	220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
6.	242-5055	[2]	FILM-WARNING (NO STEP)
7.	321-5603 Y	[1]	C-FRAME GP-POWER ANGLING
8.	321-7048 Y	[2]	CYLINDER GP-ANGLING (BULLDOZER)
9.	322-9585 Y	[1]	LINES GP-ANGLE & TILT
10.	328-4267 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
11.	109-0959	[4]	RING
	Y		SEPARATE ILLUSTRATION

#SEBP50160578

338-3522: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

338-3522 C-FRAME GP-POWER ANGLING
S/N GHS359-1799; MLW342-UP
PART OF 338-8039 BULLDOZER AR, 357-5902 GRADER AR-FINE, 338-2607 OPTION AR-GRADE CONTROL
ALSO AN ATTACHMENT

i04685215 SEBP5016

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	107-8126	[2]	BEARING
2.	110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
3.	134-6775 Y	[1]	PIN GP-CYLINDER
4.	190-5328 Y	[1]	LINK GP-PITCH
5.	220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
6.	242-5055	[2]	FILM-WARNING (NO STEP)
7.	321-5603 Y	[1]	C-FRAME GP-POWER ANGLING
8.	358-6503 CY	[2]	CYLINDER GP-ANGLING (BULLDOZER)
9.	322-9585 Y	[1]	LINES GP-ANGLE & TILT
10.	328-4267 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
11.	109-0959	[4]	RING
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP50160579

358-2190: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

358-2190 C-FRAME GP-POWER ANGLING
S/N MLW1100-UP
PART OF 435-1882 BULLDOZER AR
FOR USE WITH LINES GP-ANGLE & TILT
CANNOT BE USED WITH BLADE GP-SEMI-UNIVERSAL

i04667469 SEBP5016

3582190 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	107-8126	[2]	BEARING
2.	134-6775 Y	[1]	PIN GP-CYLINDER (BULLDOZER)
3.	348-6250 Y	[1]	LINK GP-PITCH
4.	358-2200 Y	[1]	C-FRAME GP-POWER ANGLING
5.	362-1055 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
6.	379-3506 Y	[1]	CYLINDER GP-BULLDOZER TILT
7.	379-3507 Y	[2]	CYLINDER GP-ANGLING
8.	379-3508 Y	[2]	CYLINDER GP-BULLDOZER LIFT
9.	109-0959	[4]	RING
	Y		SEPARATE ILLUSTRATION