WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)RIPPER GP
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
WINCH GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP50160790
371-0790: PLATE GP-WEAR
371-0790 PLATE GP-WEAR -FOLDABLE
S/N MLW1-UP
FOR USE WITH XL FOLDABLE BLADE
AN ATTACHMENT
S/N MLW1-UP
FOR USE WITH XL FOLDABLE BLADE
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP50160791
371-0800: PLATE GP-WEAR
371-0800 PLATE GP-WEAR -FOLDABLE
S/N GHS1-UP
FOR USE WITH 6VPAT LGP FOLDABLE BLADE
AN ATTACHMENT
S/N GHS1-UP
FOR USE WITH 6VPAT LGP FOLDABLE BLADE
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP50160792
321-5607: RIPPER AR
321-5607 RIPPER AR
S/N B3Z1-UP
Type 1
FOR USE WITH VALVE GP-BANK 4, TOOTH GP, HYDRAULIC AR-4 VALVE, COVER GP-CONSOLE (RIPPER), COVER GP-CONSOLE (RIPPER, WINCH)
CANNOT BE USED WITH WINCH AR OR DRAWBAR
AN ATTACHMENT
S/N B3Z1-UP
Type 1
FOR USE WITH VALVE GP-BANK 4, TOOTH GP, HYDRAULIC AR-4 VALVE, COVER GP-CONSOLE (RIPPER), COVER GP-CONSOLE (RIPPER, WINCH)
CANNOT BE USED WITH WINCH AR OR DRAWBAR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3A-8609 Y | [1] | MOUNTING GP-RIPPER | |
| 2. | 8M-3494 | [1] | PLATE-SERIAL NUMBER (RIPPER) | |
| 2A. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 2B. | 7X-7644 | [2] | FILM-IDENTIFICATION (TIE-DOWN) | |
| 3. | 322-3351 Y | [1] | RIPPER GP | |
| 4. | 322-4932 Y | [1] | LINES GP-RIPPER | |
| 5. | 325-5723 Y | [1] | CYLINDER GP-RIPPER | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160793
321-5607: RIPPER AR
321-5607 RIPPER AR
S/N B3Z1-UP
Type 2
FOR USE WITH VALVE GP-BANK 4, TOOTH GP, HYDRAULIC AR-4 VALVE, COVER GP-CONSOLE (RIPPER), COVER GP-CONSOLE (RIPPER, WINCH)
CANNOT BE USED WITH WINCH AR OR DRAWBAR
AN ATTACHMENT
S/N B3Z1-UP
Type 2
FOR USE WITH VALVE GP-BANK 4, TOOTH GP, HYDRAULIC AR-4 VALVE, COVER GP-CONSOLE (RIPPER), COVER GP-CONSOLE (RIPPER, WINCH)
CANNOT BE USED WITH WINCH AR OR DRAWBAR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3A-8609 Y | [1] | MOUNTING GP-RIPPER | |
| 2. | 8M-3494 | [1] | PLATE-SERIAL NUMBER (RIPPER) | |
| 2A. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 2B. | 7X-7644 | [2] | FILM-IDENTIFICATION (TIE-DOWN) | |
| 3. | 322-3351 Y | [1] | RIPPER GP | |
| 4. | 420-4315 CY | [1] | LINES GP-RIPPER | |
| 5. | 448-4913 CY | [1] | CYLINDER GP-RIPPER | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160794
322-3351: RIPPER GP
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-0703 | [1] | BAR | |
| 2. | 3A-8612 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 2A. | 7J-9682 | [2] | BUSHING | |
| 3. | 3B-8489 | [11] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 3K-8510 | [1] | PIN | |
| 5. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 6. | 6H-3616 | [4] | PLUG-PROTECTION | |
| 7. | 8J-2189 Y | [3] | TOOTH GP-RIPPER | |
| 8. | 9T-5900 B | [6] | WASHER (51.2X98X4.76-MM THK) | |
| 9. | 322-3353 | [1] | CARRIAGE AS | |
| 8P-9770 | [1] | PLATE | ||
| 10. | 322-3354 | [1] | LINK AS | |
| 10A. | 9W-0099 | [4] | BUSHING | |
| 10B. | 322-3355 | [1] | LINK AS-LOWER | |
| 6Y-3376 | [1] | PLATE | ||
| 6Y-3385 | [1] | PLATE | ||
| 8P-9770 | [1] | PLATE | ||
| 11. | 1U-0159 | [2] | PIN | |
| 12. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 13. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 14. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 15. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 16. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4244 M | [8] | NUT (M12X1.75-THD) | |
| 18. | 8T-4648 M | [8] | BOLT (M12X1.75X70-MM) | |
| 19. | 8T-7929 M | [2] | BOLT (M12X1.75X180-MM) | |
| 20. | 9J-9598 | [2] | PIN | |
| 21. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 22. | 3B-5325 | [1] | PIN-COTTER | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160795
498-6447: SHIM GP-SPECIAL
For full view, you need register
#SEBP50160796
135-9795: TOOTH GP-RIPPER
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9J-8926 Y | [3] | TOOTH GP-RIPPER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160797
8J-2189: TOOTH GP-RIPPER
8J-2189 TOOTH GP-RIPPER -STRAIGHT
S/N B3Z1-UP
PART OF 322-3351 RIPPER GP
AN ATTACHMENT
S/N B3Z1-UP
PART OF 322-3351 RIPPER GP
AN ATTACHMENT
For full view, you need register
#SEBP50160798
9J-8926: TOOTH GP-RIPPER
9J-8926 TOOTH GP-RIPPER -CURVED
S/N GHS1-UP; MLW1-UP
PART OF 135-9795 TOOTH GP-RIPPER
AN ATTACHMENT
S/N GHS1-UP; MLW1-UP
PART OF 135-9795 TOOTH GP-RIPPER
AN ATTACHMENT
For full view, you need register
#SEBP50160799
273-3763: WINCH AR
273-3763 WINCH AR
S/N GHS1-UP; MLW1-UP
PART OF 339-9623, 339-9624 OPTION AR-HYDRAULIC, 338-2590 OPTION AR-WORK TOOL
FOR USE WITH 237-7070 WINCH AR-TOWING, COVER GP-CONSOLE (WINCH), WINCH AR-TOWING
AN ATTACHMENT
S/N GHS1-UP; MLW1-UP
PART OF 339-9623, 339-9624 OPTION AR-HYDRAULIC, 338-2590 OPTION AR-WORK TOOL
FOR USE WITH 237-7070 WINCH AR-TOWING, COVER GP-CONSOLE (WINCH), WINCH AR-TOWING
AN ATTACHMENT
For full view, you need register
