AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

363-4962 COVER GP-CAB S/N B9T1-UP PART OF 379-3677, 389-5970, 420-1977 CAB AR AN ATTACHMENT 160M MOTOR GRADER


OPERATOR STATION
CAB GP
SEAT GP
MONITOR GP
DOOR GP

MOTOR GRADER 160M MOTOR GRADER B9T
 160M Motor Grader - All Wheel Drive B9T00001-UP (MACHINE) POWERED BY C9 Engine SEBP5031 160M B9T   (2007)

OPERATOR STATION

CAB GP
420-1977 CAB AR
COVER GP-CAB
263-2590 COVER GP-CAB
COVER GP-CAB
363-4962 COVER GP-CAB
LINER GP-CAB
294-0987 LINER GP-CAB
LINER GP-CAB
368-8595 LINER GP-CAB
LINER GP-CAB
447-2230 LINER GP-CAB
 

#SEBP50311160
 

363-4962: COVER GP-CAB

363-4962 COVER GP-CAB
S/N B9T1-UP
PART OF 379-3677, 389-5970, 420-1977 CAB AR
AN ATTACHMENT
i04562502 SEBP5031
3634962 COVER GP-CAB Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 356-5177 [1] COVER-VENT  
2. 363-4961 [1] COVER  
3. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
4. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
5. 6V-5746 D TRIM (0.8-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP50311161
 

252-1805: CUSHION GP-ARM

252-1805 CUSHION GP-ARM
S/N B9T1-UP
PART OF 233-3224, 233-3225, 345-1271, 345-1272 SUPPORT GP-CONTROL
ALSO AN ATTACHMENT
i02178500 SEBP5031
2521805 CUSHION GP-ARM Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLATE  
2. 233-3272 [1] CUSHION AS  
3. 5C-9553 M [2] BOLT (M6X1X16-MM)  
4. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP50311162
 

278-0668: DISPLAY GP-CAMERA

278-0668 DISPLAY GP-CAMERA -WORK AREA VISUAL SYSTEM
S/N B9T1-UP
PART OF 278-1842 CAMERA AR
CANNOT BE USED WITH @@@@@233-3122@@@@@
AN ATTACHMENT
i02566574 SEBP5031
2780668 DISPLAY GP-CAMERA Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 251-8248 [1] CABLE AS-COMMUNICATION  
3. 333-8153 [1] CONNECTION AS  
4. 344-2733 [1] MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)  
  344-3847 [1] CABLE AS (DISPLAY)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS, & WEDGE)
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 372-7500 [1] PLATE  
6. 3E-8020 M [1] SCREW-TRUSS HEAD (M6X1X25-MM)  
7. 8T-2226 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
8. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP50311163
 

361-3145: DISPLAY GP-CAMERA

361-3145 DISPLAY GP-CAMERA
S/N B9T1-UP
PART OF 391-4396 CAMERA AR
AN ATTACHMENT
i04954949 SEBP5031
3613145 DISPLAY GP-CAMERA Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 251-8248 [1] CABLE AS-COMMUNICATION  
3. 333-8153 [1] CONNECTION AS  
4. 464-6047 [1] MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)  
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  344-3847 [1] CABLE AS (DISPLAY)  
5. 361-3146 [1] PLATE  
6. 3E-6924 M [1] SCREW-TRUSS HEAD (M6X1X50-MM)  
7. 8T-2226 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
8. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP50311164
 

447-2229: DISPLAY GP-CAMERA

447-2229 DISPLAY GP-CAMERA
S/N B9T1-UP
PART OF 391-4396 CAMERA AR
AN ATTACHMENT
i05498691 SEBP5031
4472229 DISPLAY GP-CAMERA Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 251-8248 [1] CABLE AS-COMMUNICATION  
2. 333-8153 [1] CONNECTION AS  
3. 464-6047 [1] MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)  
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  344-3847 [1] CABLE AS (DISPLAY)  
4. 3S-2093 [11] STRAP-CABLE  
5. 8T-2226 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
6. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP50311165
 

294-1033: DOOR GP-CAB

294-1033 DOOR GP-CAB -LH
S/N B9T1-UP
PART OF 254-5399 CAB AR
FIELD REPLACEMENT ORDER @@@@@357-9200@@@@@
ALSO AN ATTACHMENT
i02644914 SEBP5031
2941033 DOOR GP-CAB Parts scheme 2941033 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7636 [2] PIN AS-SPRING  
2. 4E-8722 [5] NUT (RETAINER)  
3. 184-0983 M [1] NUT-HEX FLANGE (M12X1.75-THD)  
4. 252-1862 J [1] HANDLE AS-PULL  
5. 252-1863 [1] GASKET  
6. 261-1731 [1] BOOT  
7. 361-0421 [1] COVER  
8. 269-2890 [1] CLEVIS  
9. 269-2892 [1] PIN  
10. 269-2893 [1] CLIP  
11. 272-1623 [1] BELLCRANK AS  
12. 285-3692 [1] SPACER-SPECIAL  
13. 352-1643 [1] DOOR AS-CAB (LH)  
14. 295-1114 Y [1] WIPER GP-WINDOW (DOOR, LH)  
15. 295-1200 [2] HINGE (LH)  
16. 295-5648 [1] PLATE  
17. 295-5665 [1] BRACKET AS  
18. 295-6393 [1] COVER (LH)  
19. 328-4984 [1] LATCH AS-DOOR (LH)  
20. 295-6400 [1] LINKAGE AS (LH)  
21. 295-6406 [1] LATCH AS (LH)  
22. 295-6652 [1] GLASS (DOOR, LH)  
23. 296-2991 [1] BRACKET  
24. 296-4040 [1] STRIKER AS  
25. 296-4109 [1] COVER  
26. 296-4924 [1] HARNESS AS-WINDOW WIPER  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [2] PLUG-SEAL  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  144-0195 E HOSE (95-CM)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  297-4169 [2] GROMMET  
27. 297-4169 [1] GROMMET  
28. 299-1021 [1] LEVER GP-CAB DOOR  
  8T-7971 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  115-9345 [1] KNOB-CONTROL (DOOR RELEASE)  
29. 299-1660 [1] CABLE AS  
  7S-9930 [2] RING-RETAINING  
  159-0052 [2] PIN-CLEVIS  
30. 114-6658 [4] WASHER (6.5X17X1-MM THK)  
31. 109-5008 [1] BUMPER-CONICAL  
32. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 5C-7261 M [1] NUT (M8X1.25-THD)  
34. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
37. 9X-2043 M [11] SCREW-TRUSS HEAD (M6X1X14-MM)  
38. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
39. 328-5492 L SEAL (50-DM)  
40. 331-9731 E SEAL (4-CM)  
41. 110-7524 [8] BUTTON  
42. 3S-2093 [3] STRAP-CABLE  
43. 7X-0605 [1] WASHER-HARD (13X28X1.6-MM THK)  
44. 214-9186 [6] BUTTON  
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  L   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50311166
 

294-1034: DOOR GP-CAB

294-1034 DOOR GP-CAB -RH
S/N B9T161-UP
PART OF 349-2554 COMMON AR, 364-1991 OPTION AR-MACHINE
FIELD REPLACEMENT ORDER @@@@@357-9199@@@@@
OPTIONAL FIELD REPLACEMENT ORDER 500-384-4004 SEAL
CANNOT BE USED WITH @@@@@294-1035@@@@@
ALSO AN ATTACHMENT
i02756074 SEBP5031
2941034 DOOR GP-CAB Parts scheme 2941034 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7636 [2] PIN AS-SPRING  
2. 4E-8722 [5] NUT (RETAINER)  
3. 184-0983 M [1] NUT-HEX FLANGE (M12X1.75-THD)  
4. 252-1862 J [1] HANDLE AS-PULL  
5. 252-1863 [1] GASKET  
6. 261-1731 [1] BOOT  
7. 361-0421 [1] COVER  
8. 269-2890 [1] CLEVIS  
9. 269-2892 [1] PIN  
10. 269-2893 [1] CLIP  
11. 272-1623 [1] BELLCRANK AS  
12. 285-3692 [1] SPACER-SPECIAL  
13. 294-1032 [1] DOOR AS (RH)  
14. 295-1043 [2] HINGE (RH)  
15. 295-1113 Y [1] WIPER GP-WINDOW (DOOR, RH)  
16. 295-5648 [1] PLATE  
17. 295-5649 [1] BRACKET  
18. 295-5665 [1] BRACKET AS  
19. 295-6374 [1] GLASS (DOOR, RH)  
20. 295-6390 [1] COVER  
21. 295-6391 [1] COVER (RH)  
22. 328-4985 [1] LATCH AS-DOOR (RH)  
23. 295-6399 [1] LINKAGE AS (RH)  
24. 295-6405 [1] LATCH AS (RH)  
25. 296-4040 [1] STRIKER AS  
26. 296-4924 [1] HARNESS AS-WINDOW WIPER  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  186-3736 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [2] PLUG-SEAL  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  144-0195 E HOSE (95-CM)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  297-4169 [2] GROMMET  
27. 297-4169 [1] GROMMET  
28. 299-1020 [1] LEVER AS  
  8T-7971 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  115-9345 [1] KNOB-CONTROL (DOOR RELEASE)  
29. 299-1660 [1] CABLE AS  
  2B-1560 [2] PIN  
  3B-4605 [2] PIN-COTTER  
30. 114-6658 [4] WASHER (6.5X17X1-MM THK)  
31. 109-5008 [1] BUMPER-CONICAL  
32. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 5C-7261 M [1] NUT (M8X1.25-THD)  
34. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
37. 9X-2043 M [11] SCREW-TRUSS HEAD (M6X1X14-MM)  
38. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
39. 328-5492 H SEAL (50-DM)  
40. 110-7524 [8] BUTTON  
41. 331-9731 E SEAL (4-CM)  
42. 3S-2093 [4] STRAP-CABLE  
43. 7X-0605 [1] WASHER-HARD (13X28X1.6-MM THK)  
44. 214-9186 [6] BUTTON  
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50311167
 

294-1035: DOOR GP-CAB

294-1035 DOOR GP-CAB -RH
S/N B9T1-UP
CANNOT BE USED WITH @@@@@294-1034@@@@@
AN ATTACHMENT
i02718116 SEBP5031
2941035 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 331-9731 E SEAL (4-CM)  
3. 4E-8722 [5] NUT (RETAINER)  
4. 184-0983 M [1] NUT-HEX FLANGE (M12X1.75-THD)  
5. 110-7524 [8] BUTTON  
6. 268-3533 [1] LATCH AS  
7. 278-0674 [1] PLATE  
8. 294-1032 [1] DOOR AS (RH)  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
9. 295-1043 [2] HINGE (RH)  
10. 295-1113 Y [1] WIPER GP-WINDOW (DOOR, RH)  
11. 295-6374 [1] GLASS (DOOR, RH)  
12. 295-6391 [1] COVER (RH)  
13. 296-4040 [1] STRIKER AS  
14. 296-4924 [1] HARNESS AS-WINDOW WIPER  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  297-4169 [2] GROMMET  
  186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  186-3736 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
15. 297-3092 [1] PLATE  
16. 297-4169 [1] GROMMET  
17. 298-2019 [1] PLATE  
18. 302-9098 [1] COVER  
19. 114-6658 [5] WASHER (6.5X17X1-MM THK)  
22. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
23. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
24. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
25. 9X-2043 M [13] SCREW-TRUSS HEAD (M6X1X14-MM)  
26. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
27. 328-5492 J SEAL (50-DM)  
28. 3S-2093 [4] STRAP-CABLE  
29. 7X-0605 [1] WASHER-HARD (13X28X1.6-MM THK)  
30. 214-9186 [6] BUTTON  
  E   ORDER BY THE CENTIMETER
  J   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50311168
 

357-9199: DOOR GP-CAB

357-9199 DOOR GP-CAB -RH
S/N B9T1-UP
PART OF 381-7048, 381-7049 ROPS GP
AN ATTACHMENT
i04562517 SEBP5031
3579199 DOOR GP-CAB Parts scheme 3579199 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [3] NUT-CLIP (M6X1-THD)  
2. 6V-7636 [2] PIN AS-SPRING  
3. 184-0983 M [1] NUT-HEX FLANGE (M12X1.75-THD)  
4. 252-1862 J [1] HANDLE AS-PULL  
5. 252-1863 [1] GASKET  
6. 261-1731 [1] BOOT  
7. 269-2890 [1] CLEVIS  
8. 269-2892 [1] PIN  
9. 269-2893 [1] CLIP  
10. 272-1623 [1] BELLCRANK AS  
11. 285-3692 [1] SPACER-SPECIAL  
12. 295-6405 [1] LATCH AS (RH)  
13. 507-2767 [1] STRIKER AS  
14. 299-1020 [1] LEVER AS  
  8T-7971 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  115-9345 [1] KNOB-CONTROL  
  299-1024 [1] LEVER  
  299-1441 [1] SPRING  
  299-1442 [1] SPRING  
15. 299-1660 [1] CABLE AS  
  7S-9930 [2] RING-RETAINING  
  159-0052 [2] PIN-CLEVIS  
16. 328-4985 [1] LATCH AS-DOOR (RH)  
17. 357-0728 [1] HARNESS AS-WINDOW WIPER (LH)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-2225 E TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM)  
  8T-8737 [2] PLUG-SEAL  
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  144-0195 E HOSE (119-CM)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  297-4169 [2] GROMMET  
  329-3734 B TAPE-ELECTRICAL  
18. 357-9181 [1] DOOR AS (RH)  
  7Y-9096 M [2] SCREW-TRUSS HEAD (M6X1X6-MM)  
  9X-2042 M [3] SCREW-TRUSS HEAD (M6X1X12-MM)  
  308-2903 M [3] NUT-WELD (M6X1-THD)  
19. 357-9187 [1] HANDLE AS-PULL  
20. 357-9188 [1] PLATE  
21. 357-9190 [1] BRACKET AS  
22. 357-9191 [1] BUMPER  
23. 357-9236 [1] GLASS (DOOR)  
24. 357-9260 [1] COVER (WIPER-RH)  
25. 357-9261 [1] COVER-LATCH  
26. 357-9652 Y [1] WIPER GP-WINDOW (DOOR, RH)  
27. 357-9755 [1] LINKAGE  
28. 361-0421 [1] COVER  
29. 372-7541 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
30. 376-4793 [1] HANDLE AS-PULL  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
31. 380-6158 [2] HINGE AS  
    (EACH INCLUDES)
31A. 372-5042 [2] BUSHING  
32. 4E-1384 [1] BUMPER-CONICAL  
33. 114-6658 [4] WASHER (6.5X17X1-MM THK)  
34. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
35. 5C-7261 M [1] NUT (M8X1.25-THD)  
36. 6D-4244 [2] CLIP (LOOP)  
37. 8T-4000 M [2] SCREW-WASHER HEAD (M8X1.25X4.8-MM)  
38. 7X-7729 [12] WASHER (11X25X3-MM THK)  
39. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
40. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
41. 9X-2043 M [13] SCREW-TRUSS HEAD (M6X1X14-MM)  
42. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 9X-2125 M [10] BOLT-LOCKING (M10X1.5X25-MM)  
44. 331-9731 E SEAL (4-CM)  
45. 353-7114 E SEAL (440-CM)  
46. 367-2761 E SEAL (500-CM)  
47. 108-5471 [1] CLEVIS  
48. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
49. 6V-8185 [1] NUT (1/4-20-THD)  
50. 3S-2093 [1] STRAP-CABLE  
51. 7X-0605 [1] WASHER-HARD (13X28X1.6-MM THK)  
52. 242-5206 [4] SPACER (6.4X12.5X0.76-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50311169
 

357-9200: DOOR GP-CAB

357-9200 DOOR GP-CAB -LH
S/N B9T1-UP
PART OF 381-7048, 381-7049 ROPS GP
AN ATTACHMENT
i04562527 SEBP5031
3579200 DOOR GP-CAB Parts scheme 3579200 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [3] NUT-CLIP (M6X1-THD)  
2. 6V-7636 [2] PIN AS-SPRING  
3. 184-0983 M [1] NUT-HEX FLANGE (M12X1.75-THD)  
4. 252-1862 J [1] HANDLE AS-PULL  
5. 252-1863 [1] GASKET  
6. 261-1731 [1] BOOT  
7. 269-2890 [1] CLEVIS  
8. 269-2892 [1] PIN  
9. 269-2893 [1] CLIP  
10. 272-1623 [1] BELLCRANK AS  
11. 285-3692 [1] SPACER-SPECIAL  
12. 295-6406 [1] LATCH AS (LH)  
13. 507-2767 [1] STRIKER AS  
14. 299-1021 Y [1] LEVER GP-CAB DOOR  
15. 299-1660 [1] CABLE AS  
  7S-9930 [2] RING-RETAINING  
  159-0052 [2] PIN-CLEVIS  
16. 328-4984 [1] LATCH AS-DOOR (LH)  
17. 357-0728 [1] HARNESS AS-WINDOW WIPER (LH)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-2225 E TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM)  
  8T-8737 [2] PLUG-SEAL  
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  144-0195 E HOSE (134-CM)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  297-4169 [2] GROMMET  
  329-3734 B TAPE-ELECTRICAL  
18. 357-9182 [1] DOOR AS (LH)  
  308-2903 M [3] NUT-WELD (M6X1-THD)  
  7Y-9096 M [2] SCREW-TRUSS HEAD (M6X1X6-MM)  
  9X-2042 M [3] SCREW-TRUSS HEAD (M6X1X12-MM)  
19. 357-9187 [1] HANDLE AS-PULL  
20. 357-9188 [1] PLATE  
21. 357-9190 [1] BRACKET AS  
22. 357-9191 [1] BUMPER  
23. 357-9236 [1] GLASS (DOOR)  
24. 357-9257 [1] COVER (WIPER-LH)  
25. 357-9258 [1] COVER-LATCH  
26. 357-9653 Y [1] WIPER GP-WINDOW (DOOR, LH)  
27. 357-9755 [1] LINKAGE  
28. 361-0421 [1] COVER  
29. 372-7541 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
30. 376-4794 [1] HANDLE AS-PULL  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
31. 380-6158 [2] HINGE AS  
    (EACH INCLUDES)
31A. 372-5042 [2] BUSHING  
32. 4E-1384 [1] BUMPER-CONICAL  
33. 114-6658 [4] WASHER (6.5X17X1-MM THK)  
34. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
35. 5C-7261 M [1] NUT (M8X1.25-THD)  
36. 6D-4244 [2] CLIP (LOOP)  
37. 8T-4000 M [2] SCREW-WASHER HEAD (M8X1.25X4.8-MM)  
38. 7X-7729 [12] WASHER (11X25X3-MM THK)  
39. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
40. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
41. 9X-2043 M [13] SCREW-TRUSS HEAD (M6X1X14-MM)  
42. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 9X-2125 M [10] BOLT-LOCKING (M10X1.5X25-MM)  
44. 331-9731 E SEAL (4-CM)  
45. 353-7114 E SEAL (440-CM)  
46. 367-2761 E SEAL (500-CM)  
47. 108-5471 [1] CLEVIS  
48. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
49. 6V-8185 [1] NUT (1/4-20-THD)  
50. 3S-2093 [1] STRAP-CABLE  
51. 7X-0605 [1] WASHER-HARD (13X28X1.6-MM THK)  
52. 242-5206 [4] SPACER (6.4X12.5X0.76-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Alternate Exit
160M Motor Grader
Rollover Protective Structure (ROPS) - Inspect
160M Motor Grader
Operator Controls
160M Motor Grader
Mirror - If Equipped
160M Motor Grader
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Installation of Zip-In Window Door Kits on Certain M-Series and M-Series 2 Motor Graders{7305, 7308, 7310}
Installation of Zip-In Window Door Kits on Certain M-Series and M-Series 2 Motor Graders{7305, 7308, 7310}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation Procedure for a Vent Louver on Certain M Series Motor Graders{734D}
Installation Procedure for a Vent Louver on Certain M Series Motor Graders{734D}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Instructions for Installing Cab Storage Compartments on Certain M, M Series 2 and M Series 3 Motor Graders{7266, 7301, 7329}
Instructions for Installing Cab Storage Compartments on Certain M, M Series 2 and M Series 3 Motor Graders{7266, 7301, 7329}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 7X-2465 CAB MOUNTING BOLTS ON CERTAIN 12M, 14M, 16M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, 120M SERIES 2, 140M SERIES 2, AND 160M SERIES 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A VENT LOUVER ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 120M K, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
Disassembly and Assembly
Cab - Remove
160M Motor Grader Machine Systems
Cab - Install
160M Motor Grader Machine Systems
Service Magazine
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557}
2009/04/20
Procedure for Replacing the Cab Bolts on Certain Motor Graders {7266, 7301}
2009/01/26
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
Blade Lift Modulation that is Selectable is Available {5063, 5102, 7300, 7451, 7610, 7620}
2009/09/07
Zip-In Window Door Kits Are Now Available on Certain M and M-Series 2 Motor Graders {7305, 7308, 7310}
2009/12/08
New Threaded Inserts are Now Used in the Cab Roof Group on Certain Motor Graders {7301}
2009/11/11
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02
A New Foot Support is Available for Certain M and M Series 2 Motor Graders {7301}
2011/08/22
A New Special Instruction , "Instructions for Installing Cab Storage Compartments on Certain M, M Series 2 and M Series 3 Motor Graders" is Now Available {7266, 7301, 7329}
2015/07/07
Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}
Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}

Caterpillar Parts SIS Catalog 160M :

COVER GP-CAB
263-2590 COVER GP-CAB
CONTROL GP-UNPRGMED MONITOR
308-3869 CONTROL GP-UNPRGMED MONITOR
CONTROL GP-JOYSTICK
458-8701 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
441-0362 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
441-0358 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
434-2233 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
434-2232 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
360-2987 CONTROL GP-JOYSTICK
CUSHION GP-ARM
252-1805 CUSHION GP-ARM
DISPLAY GP-CAMERA
278-0668 DISPLAY GP-CAMERA
DISPLAY GP-CAMERA
361-3145 DISPLAY GP-CAMERA
DISPLAY GP-CAMERA
447-2229 DISPLAY GP-CAMERA
DOOR GP-CAB
294-1033 DOOR GP-CAB
DOOR GP-CAB
294-1034 DOOR GP-CAB
DOOR GP-CAB
294-1035 DOOR GP-CAB
DOOR GP-CAB
357-9199 DOOR GP-CAB

Truck sale:

Caterpillar 160M2, Construction
207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.