ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP50540810
375-4294: WIRING GP-MACHINE
375-4294 WIRING GP-MACHINE -HEALTH INTERFACE MODULE
S/N SPD1-UP
PART OF 438-1659 WIRING GP-MACHINE
S/N SPD1-UP
PART OF 438-1659 WIRING GP-MACHINE
Parts for your 789D TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 382-0995 Y | [1] | CABLE AS-COMMUNICATION (ETHERNET, EXTENSION) | ||
| 343-8446 Y | [1] | CABLE GP-BATTERY (5-FT) | ||
| 375-4279 Y | [1] | HARNESS AS-CONTROL | ||
| 357-7167 Y | [1] | HARNESS AS-POWER (GPS) | ||
| 348-2154 Y | [1] | MOUNTING GP-ELECTRONIC CONTROL (ECM) | ||
| 343-8440 Y | [1] | MOUNTING GP-WIRING (HIM, TIM) | ||
| 343-8438 | [2] | MOUNTING GP-CIRCUIT BREAKER | ||
| (EACH INCLUDES) | ||||
| 096-6166 | [1] | WASHER-HARD (4.5X9X1-MM THK) | ||
| 9X-8486 | [1] | SCREW-MACHINE (8-32X0.75-IN) | ||
| 439-2621 | [1] | MOUNTING GP-WIRING (ETHERNET) | ||
| 2D-0388 | [1] | GROMMET (25.4-MM ID) | ||
| 3S-2093 | [15] | STRAP-CABLE | ||
| 7K-1181 | [15] | STRAP-CABLE | ||
| 435-9854 | [1] | ADAPTER-SEAL (PLUG) | ||
| 419-5974 | [1] | ADAPTER AS (AT04-6P TO RJ45) | ||
| 432-2668 | [1] | NUT (13/16-28-THD) | ||
| 435-9854 | [1] | ADAPTER-SEAL (PLUG) | ||
| 343-8444 | [1] | HARNESS AS-WIRING (BREAKOUT) | ||
| 6T-3642 | [2] | CIRCUIT BREAKER AS (10-AMPERE) | ||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 433-9728 | [1] | FILM-WARNING (EXPLOSION, WIRELESS, OMM, U.S.) | ||
| 433-9730 | [1] | FILM-WARNING (EXPLOSION, WIRELESS, OMM, INTL) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50540811
438-1659: WIRING GP-MACHINE
Parts for your 789D TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 438-1670 Y | [1] | WIRING GP-COMMUNICATION (TIRE PRESSURE MONITOR) | ||
| 375-4294 Y | [1] | WIRING GP-MACHINE (HEALTH INTERFACE MODULE) | ||
| 454-7546 Y | [1] | WIRING GP-MONITOR | ||
| 285-1142 | [1] | CONTROL GP-UNPROGRAMMED (ELECTRONIC) | ||
| 7X-6315 | [1] | STRAP AS-GROUND | ||
| 101-0852 | [1] | SCREW-PAN HEAD (8-32X0.375-IN) | ||
| 136-0156 | [1] | WASHER (4.3X0.8X0.8-MM THK) | ||
| 160-3518 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50540812
531-4592: WIRING GP-MACHINE
Parts for your 789D TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4M-7146 | [1] | STRAP AS-GROUND | |
| 2. | 7K-1181 | [12] | STRAP-CABLE | |
| 3. | 118-7226 Y | [1] | SENSOR GP-TEMPERATURE (REAR BRAKE OIL, RH) | |
| 3A. | 118-7226 Y | [1] | SENSOR GP-TEMPERATURE (REAR BRAKE OIL, LH) | |
| 3B. | 118-7226 Y | [1] | SENSOR GP-TEMPERATURE (TORQUE CONVERTER) | |
| 4. | 125-8534 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 142-1657 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 160-0564 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 7. | 192-8959 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 192-8961 | [1] | BRACKET | |
| 9. | 193-5576 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 10. | 229-3177 | [1] | PLATE AS | |
| 6V-6716 | [2] | RIVET-TRUSS HEAD | ||
| 109-1645 | [1] | CLIP | ||
| 11. | 243-5821 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 246-7387 | [1] | BRACKET | ||
| 12. | 289-9520 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 289-9519 | [1] | BRACKET | ||
| 13. | 297-5513 | [1] | CABLE AS | |
| 3L-7634 | [2] | TERMINAL-RING (0000-GA, 1/2-IN SCREW) | ||
| 159-8054 E | CABLE-ELECTRICAL (0000-GA, BLACK)(85-CM) | |||
| 16. | 347-1858 Y | [1] | HARNESS AS-TRANSMISSION | |
| 17. | 347-1860 Y | [1] | HARNESS AS-SENSOR (FUEL LEVEL) | |
| 18. | 347-1865 Y | [1] | HARNESS AS-ENGINE | |
| 19. | 539-6144 Y | [1] | HARNESS AS-CHASSIS | |
| 20. | 351-6021 | [2] | PLATE | |
| 21. | 352-4203 | [2] | STRAP-CABLE | |
| 26. | 091-9035 | [3] | SPACER (11X25X20-MM THK) | |
| 27. | 483-4287 | [8] | PLATE | |
| 28. | 162-2165 M | [4] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 29. | 172-6833 | [1] | CLIP (LOOP) | |
| 30. | 173-2090 | [2] | SPACER (11X20X15-MM THK) | |
| 31. | 177-4562 | [3] | GROMMET | |
| 32. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 33. | 186-0357 | [5] | CLIP | |
| 34. | 1S-0994 | [2] | CLIP (LOOP) | |
| 35. | 204-2281 | [48] | STRAP-CABLE | |
| 36. | 204-8000 | [2] | MOUNTING-CABLE TIE | |
| 37. | 214-7568 | [3] | SEAL-O-RING | |
| 38. | 231-0336 M | [9] | STUD-TAPERLOCK (M10X1.5X70-MM) | |
| 39. | 274-4478 | [1] | CABLE AS (VIDEO, 11-M) | |
| 40. | 533-4159 | [6] | BOLT AS | |
| 41. | 2Y-3812 | [4] | CLIP | |
| 42. | 302-3908 | [1] | SPACER (11X20X30-MM THK) | |
| 43. | 305-0660 | [2] | SPACER (10.5X15X15-MM THK) | |
| 44. | 344-5675 M | [13] | NUT (M10X1.5-THD) | |
| 45. | 3S-8664 | [1] | CLIP (LOOP) | |
| 46. | 4D-7388 | [14] | CLIP (LOOP) | |
| 47. | 4D-7735 | [3] | CLIP | |
| 48. | 4D-7794 | [21] | CLIP | |
| 49. | 4S-1962 | [9] | CLIP (LOOP) | |
| 50. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 51. | 5G-3676 | [2] | GROMMET | |
| 52. | 5K-5338 | [17] | CLIP (LOOP) | |
| 53. | 5P-7470 | [2] | CLIP (SLOT) | |
| 54. | 5P-7471 | [2] | CLIP (TAB) | |
| 55. | 5P-8182 | [2] | GROMMET (46-MM ID) | |
| 56. | 5P-8444 | [1] | GROMMET (37-MM ID) | |
| 57. | 6D-4244 | [1] | CLIP (LOOP) | |
| 58. | 6D-4246 | [2] | CLIP (LOOP) | |
| 59. | 6H-7062 | [1] | SPACER (13.5X25X19-MM THK) | |
| 60. | 8C-9660 | [8] | WASHER (4.6X7.9X0.8-MM THK) | |
| 61. | 8M-2770 | [3] | CLIP (LOOP) | |
| 62. | 8M-2773 | [1] | CLIP (LOOP) | |
| 63. | 8R-0721 | [1] | SPACER (11X16X35-MM THK) | |
| 64. | 8T-1889 | [5] | CLIP (SLOT) | |
| 65. | 8T-1890 | [5] | CLIP (TAB) | |
| 66. | 8T-4121 | [56] | WASHER-HARD (11X21X2.5-MM THK) | |
| 67. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 68. | 8T-4137 M | [36] | BOLT (M10X1.5X20-MM) | |
| 69. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 70. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 71. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 72. | 470-4908 | [4] | PLATE | |
| 73. | 470-4909 | [4] | PLATE | |
| 74. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 75. | 8T-4835 | [1] | BOLT (1/2-13X2-IN) | |
| 76. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| 77. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 78. | 9C-9458 | [1] | BRACKET AS | |
| 79. | 9M-4972 | [1] | CLIP (LOOP) | |
| 80. | 9M-8406 | [1] | CLIP (LOOP) | |
| 81. | 479-2171 | [8] | BOLT AS | |
| 82. | 479-2172 | [2] | BOLT AS | |
| 83. | 292-2893 E | CONDUIT (10.1-MM ID)(10-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50540813
531-4594: WIRING GP-MACHINE
Parts for your 789D TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [20] | STRAP-CABLE | |
| 2. | 124-3019 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 144-4138 | [1] | SUPPORT GP-LIGHT (ROD) | |
| 5C-7261 M | [1] | NUT (M8X1.25-THD) | ||
| 7X-7915 | [1] | ROD END | ||
| 8T-4133 M | [1] | NUT (M10X1.5-THD) | ||
| 8T-6431 | [1] | ROD END | ||
| 144-4139 | [1] | ROD | ||
| 4. | 198-4271 | [1] | LEVER | |
| 5. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5623 BD | WIRE-ELECTRICAL (16-GA, BLACK) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 6. | 248-4760 | [2] | PLATE | |
| 7. | 266-2338 | [1] | SENSOR GP-POSITION (ROTARY) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 9X-1813 E | SLEEVE (17-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8. | 359-9192 | [1] | PLATE | |
| 9. | 423-9677 Y | [1] | HARNESS AS-LIGHTING (TAIL) | |
| 10. | 450-4949 | [2] | LAMP GP-SIGNAL (24-VOLT, STOP, TAIL) | |
| (EACH INCLUDES) | ||||
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 11. | 539-6143 Y | [1] | HARNESS AS-REAR CHASSIS | |
| 12. | 033-8248 | [5] | CLIP (LOOP) | |
| 13. | 067-3045 | [1] | CLIP (LOOP) | |
| 14. | 105-3487 M | [1] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 15. | 107-0269 M | [5] | BOLT-HEAD (M8X1.25X50-MM) | |
| 16. | 124-9633 | [2] | CLIP (SLOT) | |
| 17. | 130-5300 | [8] | CLIP | |
| 18. | 130-5301 | [3] | CLIP | |
| 19. | 173-2090 | [2] | SPACER (11X20X15-MM THK) | |
| 20. | 174-5907 | [3] | CLIP (LOOP) | |
| 21. | 186-0357 | [8] | CLIP | |
| 22. | 1S-0994 | [3] | CLIP (LOOP) | |
| 23. | 204-2281 | [2] | STRAP-CABLE | |
| 24. | 204-8000 | [2] | MOUNTING-CABLE TIE | |
| 25. | 259-7140 M | [2] | STUD-TAPERLOCK (M10X1.5X80-MM) | |
| 26. | 297-1546 | [1] | CLIP | |
| 27. | 344-5675 M | [8] | NUT (M10X1.5-THD) | |
| 28. | 3S-8665 | [1] | CLIP (LOOP) | |
| 29. | 4D-7735 | [1] | CLIP | |
| 30. | 4D-7794 | [6] | CLIP | |
| 31. | 4P-7581 | [2] | CLIP (LADDER) | |
| 32. | 5C-2890 M | [6] | NUT (M6X1-THD) | |
| 33. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 34. | 5K-3294 | [2] | CLIP (SLOT) | |
| 35. | 5K-5338 | [1] | CLIP (LOOP) | |
| 36. | 6D-3479 | [3] | CLIP (LOOP) | |
| 37. | 6D-4244 | [4] | CLIP (LOOP) | |
| 38. | 6D-4246 | [2] | CLIP (LOOP) | |
| 39. | 7C-4354 | [3] | CLIP | |
| 40. | 7X-2541 M | [2] | BOLT (M8X1.25X140-MM) | |
| 41. | 8M-2770 | [4] | CLIP (LOOP) | |
| 42. | 8M-2773 | [5] | CLIP (LOOP) | |
| 43. | 8R-0721 | [2] | SPACER (11X16X35-MM THK) | |
| 44. | 8T-4121 | [54] | WASHER-HARD (11X21X2.5-MM THK) | |
| 45. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 46. | 8T-4137 M | [32] | BOLT (M10X1.5X20-MM) | |
| 47. | 8T-4179 M | [2] | BOLT (M12X1.75X20-MM) | |
| 48. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 49. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 50. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 51. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 52. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 53. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 54. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 55. | 9M-4972 | [3] | CLIP (LOOP) | |
| 56. | 9M-8406 | [1] | CLIP (LOOP) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50540814
345-8962: WIRING GP-MIRROR
345-8962 WIRING GP-MIRROR -HEATED
S/N SPD1-UP
PART OF 348-8737, 348-8738 MIRROR AR-REAR VIEW
AN ATTACHMENT
S/N SPD1-UP
PART OF 348-8737, 348-8738 MIRROR AR-REAR VIEW
AN ATTACHMENT
Parts for your 789D TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [23] | STRAP-CABLE | |
| 2. | 352-8802 | [1] | HARNESS AS-WIRING (PLATFORM, RH) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (60-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 3. | 352-8803 | [1] | HARNESS AS-WIRING (PLATFORM, LH) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 4. | 357-7765 | [1] | HARNESS AS-WIRING (HEATED MIRROR, RH) | |
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 5. | 130-5300 | [4] | CLIP | |
| 6. | 4D-7794 | [1] | CLIP | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP50540815
192-7419: WIRING GP-MONITOR
Parts for your 789D TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 192-7420 Y | [1] | CONTROL & MTG GP-MONITOR (ROAD ANALYSIS CONTROL) | ||
| 5P-7854 | [1] | CLIP (LOOP) | ||
| 8M-2770 | [2] | CLIP (LOOP) | ||
| 192-7413 | [1] | HARNESS AS-CONTROL | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8T-8730 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [132] | PLUG-SEAL | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 9X-3402 | [9] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [9] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2255 | KIT-CONNECTING PLUG (12-PIN) | |||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 7K-1181 | [2] | STRAP-CABLE | ||
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50540816
345-8906: WIRING GP-MONITOR
345-8906 WIRING GP-MONITOR -PAYLOAD CONTROL SYSTEM
S/N SPD1-724
PLATFORM, RH, LAMP
PART OF 344-0258 INSTALLATION AR-PAYLOAD
AN ATTACHMENT
S/N SPD1-724
PLATFORM, RH, LAMP
PART OF 344-0258 INSTALLATION AR-PAYLOAD
AN ATTACHMENT
Parts for your 789D TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-2687 | [6] | SCREW-PAN HEAD (10-24X1-IN) | |
| 2. | 9F-8125 | [6] | LOCKWASHER | |
| 3. | 248-1264 | [1] | PLATE AS | |
| 8F-9836 | [1] | BOSS (3/8-16-THD) | ||
| 4. | 248-1265 | [1] | BRACKET AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 285-9275 | [1] | BRACKET AS | |
| 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [3] | NUT-WELD (M12X1.75-THD) | ||
| 6. | 353-2588 | [1] | HARNESS AS-LIGHTING | |
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 5P-0695 E | CONDUIT (266-CM) | |||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM) | |||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 7. | 033-8248 | [1] | CLIP (LOOP) | |
| 8. | 130-5300 | [2] | CLIP | |
| 9. | 1S-0994 | [9] | CLIP (LOOP) | |
| 10. | 246-9869 | [1] | LAMP GP-PAYLOAD SIGNAL (24-VOLT) | |
| 11. | 246-9870 | [1] | LAMP GP-PAYLOAD SIGNAL (24-VOLT) | |
| 12. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 13. | 5P-7648 | [1] | GROMMET | |
| 14. | 8D-1470 | [1] | GROMMET | |
| 15. | 8T-4121 | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4137 M | [19] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50540817
345-8906: WIRING GP-MONITOR
345-8906 WIRING GP-MONITOR -PAYLOAD CONTROL SYSTEM
S/N SPD725-UP
PLATFORM, RH, LAMP
PART OF 344-0258 INSTALLATION AR-PAYLOAD
AN ATTACHMENT
S/N SPD725-UP
PLATFORM, RH, LAMP
PART OF 344-0258 INSTALLATION AR-PAYLOAD
AN ATTACHMENT
Parts for your 789D TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-2687 | [6] | SCREW-PAN HEAD (10-24X1-IN) | |
| 2. | 096-0192 | [6] | LOCKWASHER | |
| 3. | 248-1264 | [1] | PLATE AS | |
| 8F-9836 | [1] | BOSS (3/8-16-THD) | ||
| 4. | 248-1265 | [1] | BRACKET AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 285-9275 | [1] | BRACKET AS | |
| 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [3] | NUT-WELD (M12X1.75-THD) | ||
| 6. | 353-2588 | [1] | HARNESS AS-LIGHTING | |
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 5P-0695 E | CONDUIT (266-CM) | |||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM) | |||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 7. | 033-8248 | [1] | CLIP (LOOP) | |
| 8. | 130-5300 | [2] | CLIP | |
| 9. | 1S-0994 | [9] | CLIP (LOOP) | |
| 10. | 246-9869 | [1] | LAMP GP-PAYLOAD SIGNAL (24-VOLT)(RED) | |
| 11. | 246-9870 | [1] | LAMP GP-PAYLOAD SIGNAL (24-VOLT)(GREEN) | |
| (EACH LAMP GP INCLUDES) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 12. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 13. | 5P-7648 | [1] | GROMMET | |
| 14. | 8D-1470 | [1] | GROMMET | |
| 15. | 8T-4121 C | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4137 CM | [15] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 18. | 5M-3062 C | [4] | BOLT (3/8-16X0.75-IN) | |
| 19. | 8T-4896 C | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP50540818
345-8907: WIRING GP-MONITOR
345-8907 WIRING GP-MONITOR -PAYLOAD CONTROL SYSTEM
S/N SPD1-UP
PART OF 344-0259 MONITOR AR-PAYLOAD
AN ATTACHMENT
S/N SPD1-UP
PART OF 344-0259 MONITOR AR-PAYLOAD
AN ATTACHMENT
Parts for your 789D TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 285-9275 | [1] | BRACKET AS | |
| 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [3] | NUT-WELD (M12X1.75-THD) | ||
| 2. | 377-3046 | [1] | BRACKET AS | |
| 8T-3490 M | [6] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 204-2281 | [11] | STRAP-CABLE | |
| 4. | 204-8000 | [10] | MOUNTING-CABLE TIE | |
| 5. | 220-8650 Y | [1] | MONITOR GP-PAYLOAD | |
| 6. | 479-2171 | [12] | BOLT AS | |
| 7. | 539-0028 | [1] | GUARD | |
| 8. | 541-2031 Y | [1] | HARNESS AS-MONITOR | |
| 9. | 5P-1076 | [7] | WASHER-HARD (13.5X30X4-MM THK) | |
| 10. | 8D-1470 | [1] | GROMMET | |
| 11. | 8M-2784 | [1] | GROMMET | |
| 12. | 8T-4139 M | [3] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50540819
454-7546: WIRING GP-MONITOR
Parts for your 789D TRUCK:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Technical Information Bulletin
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Troubleshooting
MID 036 - CID 0091 - FMI 08 Throttle Position signal abnormal
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0101 - FMI 03 Crankcase Pressure open/short to +batt
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0101 - FMI 04 Crankcase Pressure short to ground
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0262 - FMI 04 5 Volt Sensor DC Power Supply short to ground
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0262 - FMI 03 5 Volt Sensor DC Power Supply short to +batt
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0263 - FMI 03 Digital Sensor Supply short to +batt
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0263 - FMI 04 Digital Sensor Supply short to ground
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0274 - FMI 04 Atmospheric Pressure short to ground
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0274 - FMI 13 Atmospheric Pressure calibration required
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0827 - FMI 08 Left Exhaust Temperature signal abnormal
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0261 - FMI 13 Engine Timing calibration required
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0101 - FMI 13 Crankcase Pressure calibration required
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0110 - FMI 04 Engine Coolant Temperature short to ground
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0168 - FMI 02 System Voltage intermittent/erratic
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0274 - FMI 03 Atmospheric Pressure open/short to +batt
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0542 - FMI 13 Unfiltered Engine Oil Pressure cal required
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0100 - FMI 13 Engine Oil Pressure calibration required
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0542 - FMI 02 Unfiltered Engine Oil Pressure misinstalled
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0190 - FMI 02 Loss of Engine Speed signal
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0190 - FMI 03 Engine Speed open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0190 - FMI 08 Engine Speed signal abnormal
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
Analog Sensor - Calibrate
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
Electrical Connectors and Functions
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
Engine Sensor Open/Short Test
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0542 - FMI 03 Unfiltered Engine Oil Pressure open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0828 - FMI 08 Right Exhaust Temperature signal abnormal
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
MID 036 - CID 0091 - FMI 02 Incorrect Throttle Switch inputs
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0580 - FMI 03 Power Shift Pres Sensor open/short to +batt
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0580 - FMI 04 Power Shift Pres Sensor short to ground
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0580 - FMI 08 Power Shift Pres Sensor signal is abnormal
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0581 - FMI 05 Power Shift Solenoid open circuit
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0581 - FMI 06 Power Shift Solenoid short to ground
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
MID 036 - CID 0581 - FMI 13 Power Shift Solenoid cal required
3500B Engines for 5130B and 5230B Excavators
3500B Engines for 5130B and 5230B Excavators
Service Magazine