WORK TOOLS
RIPPER GPHYDRAULIC SYSTEM
LINES GP-RIPPERWORK TOOLS
RIPPER GPWINCH GP
GROUND ENGAGING TOOLS (G.E.T.)
RIPPER GP
PIN GP
WORK TOOLS
RIPPER GP
#SEBP50881410
331-5072: FRAME GP-RIPPER
331-5072 FRAME GP-RIPPER -SINGLE SHANK
S/N TDC1-UP; ESS1-UP
PART OF 369-9253, 385-2711 RIPPER AR
AN ATTACHMENT
S/N TDC1-UP; ESS1-UP
PART OF 369-9253, 385-2711 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0990 | [4] | PIN | |
| 2. | 4T-1389 | [2] | PIN AS | |
| 3. | 4T-3522 B | [16] | WASHER (95X170X3-MM THK) | |
| 4. | 6J-9482 | [2] | PIN AS | |
| 5. | 6V-9313 | [2] | PLUG | |
| 6. | 7T-7305 | [6] | PLATE | |
| 7. | 132-7994 | [2] | PIN AS | |
| 8. | 329-2444 | [1] | FRAME & BEARING AS | |
| 8A. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 8B. | 4T-9751 | [4] | BUSHING | |
| 8C. | 7T-3746 | [4] | BUSHING | |
| 9. | 3E-6756 | [16] | SEAL-LIP TYPE | |
| 10. | 3E-6757 | [8] | SEAL-LIP TYPE | |
| 11. | 483-0424 M | [4] | LOCKNUT (M20X2.5-THD) | |
| 12. | 7X-2568 M | [4] | BOLT (M20X2.5X180-MM) | |
| 13. | 8T-5460 M | [12] | BOLT (M20X2.5X40-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP50881411
385-2714: FRAME GP-RIPPER
385-2714 FRAME GP-RIPPER -SINGLE SHANK
S/N ESA1-UP
PART OF 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
S/N ESA1-UP
PART OF 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0990 | [4] | PIN | |
| 2. | 4T-1389 | [2] | PIN AS | |
| 3. | 4T-3522 B | [16] | WASHER (95X170X3-MM THK) | |
| 4. | 6J-9482 | [2] | PIN AS | |
| 5. | 6V-9313 | [2] | PLUG | |
| 6. | 7T-7305 | [6] | PLATE | |
| 7. | 132-7994 | [2] | PIN AS | |
| 8. | 329-2444 | [1] | FRAME & BEARING AS | |
| 8A. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 8B. | 4T-9751 | [4] | BUSHING | |
| 8C. | 7T-3746 | [4] | BUSHING | |
| 9. | 3E-6756 | [16] | SEAL-LIP TYPE | |
| 10. | 3E-6757 | [8] | SEAL-LIP TYPE | |
| 11. | 483-0424 M | [4] | LOCKNUT (M20X2.5-THD) | |
| 12. | 7X-2568 M | [4] | BOLT (M20X2.5X180-MM) | |
| 13. | 8T-5460 M | [12] | BOLT (M20X2.5X40-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP50881412
385-2717: FRAME GP-RIPPER
385-2717 FRAME GP-RIPPER -MULTISHANK
S/N ESN1-UP
PART OF 385-2716 RIPPER AR
AN ATTACHMENT
S/N ESN1-UP
PART OF 385-2716 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0990 | [4] | PIN | |
| 2. | 4T-0203 | [2] | PIN AS | |
| 3. | 4T-1389 | [4] | PIN AS | |
| 4. | 4T-3522 | [16] | WASHER (95X170X3-MM THK) | |
| 5. | 6V-9313 | [2] | PLUG | |
| 6. | 7T-7305 | [6] | PLATE | |
| 7. | 251-1725 Y | [1] | FRAME & BEARING AS | |
| 8. | 3E-6756 | [16] | SEAL-LIP TYPE | |
| 9. | 3E-6757 | [8] | SEAL-LIP TYPE | |
| 10. | 483-0424 M | [4] | LOCKNUT (M20X2.5-THD) | |
| 11. | 7X-2568 M | [4] | BOLT (M20X2.5X180-MM) | |
| 12. | 8T-5460 M | [12] | BOLT (M20X2.5X40-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50881413
388-2548: KIT-RETROFIT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 438-8683 Y | [1] | CONTROL GP-JOYSTICK | ||
| 316-8641 | [1] | BRACKET AS (LH) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 316-8642 | [1] | BRACKET AS (RH) | ||
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 450-5796 | [1] | BRACKET AS | ||
| 317-2656 | [1] | HANDHOLD AS | ||
| 374-3652 | [1] | HARNESS AS-CONTROL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 190-7615 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8736 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 8T-8737 | [29] | PLUG-SEAL | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 230-5008 | [3] | PLUG AS-CONNECTOR (4-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7031 | [1] | SEAL-CONNECTOR | ||
| 230-5009 | [3] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 248-5358 | [1] | PLUG AS-CONNECTOR (39-PIN) | ||
| 343-8751 | [1] | HARNESS AS-RADIO (SATELLITE) | ||
| 1S-9593 | [1] | STRAP-CABLE | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [23] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(45-CM) | |||
| 134-2540 | [2] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 167-8987 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 253-8110 | [1] | PLUG (12-PIN) | ||
| 268-3371 | [1] | CAP AS-CONNECTOR | ||
| 274-3777 | [1] | CAP-CONNECTOR | ||
| 283-8106 | [4] | SOCKET-CONNECTOR (20-GA) | ||
| -OR- | ||||
| 374-8372 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 312-8811 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 363-9053 | [1] | CAP AS-CONNECTOR | ||
| 341-8274 | [1] | HARNESS AS-WIRING (MAST, LH) | ||
| 5P-0742 E | HOSE (34-CM) | |||
| 9W-0844 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 108-1304 E | TUBE-HEAT SHRINK (33-MM DIA)(16-CM) | |||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 228-3323 | [2] | CLIP-SPRING | ||
| 341-8275 | [1] | HARNESS AS-WIRING (MAST, RH) | ||
| 5P-0742 E | HOSE (35-CM) | |||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 108-1304 E | TUBE-HEAT SHRINK (33-MM DIA)(16-CM) | |||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 228-3323 | [1] | CLIP-SPRING | ||
| 261-4983 | [1] | PLATE AS | ||
| 373-6744 | [1] | PLATE AS | ||
| 245-4252 | [1] | SHIELD AS | ||
| 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | ||
| 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | ||
| 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | ||
| 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | ||
| 236-8826 | [3] | BOSS (1-1/8-18X0.708-IN) | ||
| 224-4905 | [1] | BUMPER | ||
| 7R-3029 | [3] | CAP-DUST | ||
| 4P-7428 | [2] | CLIP (LADDER) | ||
| 5P-7854 | [2] | CLIP (LOOP) | ||
| 373-6203 | [1] | COVER | ||
| 325-1558 | [2] | FILM-IDENTIFICATION (DUAL RECEIVER MAST) | ||
| 325-9417 | [1] | FILM-IDENTIFICATION (TILT SENSOR) | ||
| 364-3718 | [1] | FILM-IDENTIFICATION (JOYSTICK) | ||
| 214-2015 | [1] | LATCH | ||
| 458-0118 | [1] | PLATE | ||
| 245-4245 | [1] | PLATE | ||
| 308-1395 | [3] | PLATE | ||
| 373-6745 | [1] | PLATE | ||
| 434-3129 | [1] | PLATE | ||
| 131-3539 M | [3] | SCREW-FLAT HEAD (M8X1.25X30-MM) | ||
| 6D-3033 | [12] | SCREW-SOCKET HEAD (4-40X0.5-IN) | ||
| 3E-3892 | [18] | SEAL | ||
| 7K-1181 | [17] | STRAP-CABLE | ||
| 204-2281 | [2] | STRAP-CABLE | ||
| 7X-7729 | [4] | WASHER (11X25X3-MM THK) | ||
| 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50881414
215-6421: MOUNTING GP-RIPPER
215-6421 MOUNTING GP-RIPPER
S/N ESA1-UP; TDC1-UP; TDD1-UP; ESM1-UP; ESN1-UP; ESS1-UP
PART OF 369-9253, 369-9254, 385-2711, 385-2715, 385-2716 RIPPER AR, 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
S/N ESA1-UP; TDC1-UP; TDD1-UP; ESM1-UP; ESN1-UP; ESS1-UP
PART OF 369-9253, 369-9254, 385-2711, 385-2715, 385-2716 RIPPER AR, 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-6660 | [1] | PLATE | |
| 2. | 9W-7990 | [2] | BRACKET | |
| 3. | 162-0390 | [2] | PIN | |
| 4. | 162-5218 | [1] | PLATE AS | |
| 162-7222 | [2] | BAR | ||
| 5. | 162-5220 | [1] | PLATE AS | |
| 3B-0551 | [1] | PLUG-PIPE | ||
| 162-7220 | [4] | BLOCK | ||
| 6. | 215-6415 | [1] | BRACKET AS (RH) | |
| 7. | 215-6420 | [1] | BRACKET AS (LH) | |
| 8. | 6F-4161 | [2] | DOWEL | |
| 9. | 7X-2562 M | [2] | BOLT (M20X2.5X45-MM) | |
| 10. | 7X-2581 M | [20] | BOLT (M30X3.5X100-MM) | |
| 11. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4123 | [2] | WASHER (22X35X3.5-MM THK) | |
| 13. | 8T-4131 M | [4] | NUT (M20X2.5-THD) | |
| 14. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 15. | 8T-4141 M | [4] | BOLT (M20X2.5X70-MM) | |
| 16. | 8T-5439 | [16] | WASHER-HARD (21.5X45X6-MM THK) | |
| 17. | 8T-6430 M | [8] | BOLT (M20X2.5X50-MM) | |
| 18. | 9X-8258 | [20] | WASHER (33X56X6-MM THK) | |
| M | METRIC PART | |||
#SEBP50881415
217-3392: MOUNTING GP-WINCH
217-3392 MOUNTING GP-WINCH
S/N MLN1-UP
PART OF 216-9006 WINCH AR-TOWING
AN ATTACHMENT
S/N MLN1-UP
PART OF 216-9006 WINCH AR-TOWING
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-5320 | [2] | PIN-COTTER | |
| 2. | 7X-0427 | [10] | BOLT (1-1/4-7X3.5-IN) | |
| 3. | 7X-0533 | [10] | WASHER-HARD (34X55X6-MM THK) | |
| 4. | 7X-2580 M | [14] | BOLT (M30X3.5X90-MM) | |
| 5. | 9X-8258 | [14] | WASHER (33X56X6-MM THK) | |
| 6. | 152-8371 | [1] | ADAPTER-TIP (RH) | |
| 7. | 152-8372 | [1] | ADAPTER-TIP (LH) | |
| 8. | 197-7837 | [1] | PIN-DRAWBAR | |
| 9. | 245-9829 | [12] | PLUG | |
| M | METRIC PART | |||
#SEBP50881416
6Y-7243: PLATE AS-WEAR
6Y-7243 PLATE AS-WEAR
S/N DK31-UP; MLN1-1499
PART OF 257-0005 BLADE AS-UNIVERSAL, 256-5314 BLADE GP-UNIVERSAL
AN ATTACHMENT
S/N DK31-UP; MLN1-1499
PART OF 257-0005 BLADE AS-UNIVERSAL, 256-5314 BLADE GP-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP50881417
9W-2707: PLATE AS-WEAR
9W-2707 PLATE AS-WEAR
S/N DK21-UP; DMS1-UP
PART OF 4Z-9507 BLADE AS-SEMI-UNIVERSAL, 245-8152 BLADE GP-SEMI-UNIVERSAL
AN ATTACHMENT
S/N DK21-UP; DMS1-UP
PART OF 4Z-9507 BLADE AS-SEMI-UNIVERSAL, 245-8152 BLADE GP-SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP50881418
380-1214: PROTECTOR GP-SHANK
380-1214 PROTECTOR GP-SHANK
S/N MLN1-UP
PART OF 445-2035, 445-2036 TOOTH GP-RIPPER
FOR USE WITH CR450 RIPPER
AN ATTACHMENT
S/N MLN1-UP
PART OF 445-2035, 445-2036 TOOTH GP-RIPPER
FOR USE WITH CR450 RIPPER
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP50881419
160-3616: PULLER AR-PIN
160-3616 PULLER AR-PIN
S/N MLN1-UP
PART OF 379-0232, 379-0233, 379-0309, 379-0310 RIPPER AR-SINGLE SHANK
FOR USE WITH @@@@@211-9501@@@@@, SINGLE SHANK RIPPERS
AN ATTACHMENT
S/N MLN1-UP
PART OF 379-0232, 379-0233, 379-0309, 379-0310 RIPPER AR-SINGLE SHANK
FOR USE WITH @@@@@211-9501@@@@@, SINGLE SHANK RIPPERS
AN ATTACHMENT
For full view, you need register
