AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

297-9153 ADJUSTMENT GP-HYDRAULIC TRACK S/N GSZ1-UP PART OF 136-2427, 297-9127 IDLER GP-FRONT FIELD REPLACEMENT FOR @@@@@136-2430@@@@@ 365C L


UNDERCARRIAGE
ADJUSTMENT GP-HYDRAULIC TRACK
UNDERCARRIAGE GP

MOBILE HYD POWER UNIT 365C L MOBILE HYD POWER UNIT GSZ
 365C L Mobile Hydraulic Power Unit GSZ00001-UP (MACHINE) POWERED BY C15 Engine SEBP5216 365C L GSZ   (2007)

UNDERCARRIAGE

ADJUSTMENT GP-HYDRAULIC TRACK
ADJUSTMENT GP-HYDRAULIC TRACK
136-2430 ADJUSTMENT GP-HYDRAULIC TRACK
ADJUSTMENT GP-HYDRAULIC TRACK
297-9153 ADJUSTMENT GP-HYDRAULIC TRACK
 

#SEBP52160410
 

297-9153: ADJUSTMENT GP-HYDRAULIC TRACK

297-9153 ADJUSTMENT GP-HYDRAULIC TRACK
S/N GSZ1-UP
PART OF 136-2427, 297-9127 IDLER GP-FRONT
FIELD REPLACEMENT FOR @@@@@136-2430@@@@@
i02991840 SEBP5216
2979153 ADJUSTMENT GP-HYDRAULIC TRACK Parts scheme
  For full view, you need register

Parts for your 365C L MOBILE HYD POWER UNIT:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-5926 [1] VALVE-RELIEF  
2. 357-7540 [1] VALVE-FILL  
3. 136-2439 [1] PLATE AS  
  4B-4158 [4] SCREW-DRIVE (NO 4X0.25-IN)  
  136-2440 [1] PLATE  
  253-1346 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
4. 136-2441 [1] CYLINDER  
5. 136-2443 [1] SEAL-LIP TYPE  
6. 136-2444 [1] RING  
7. 136-2445 [2] RING-BACKUP  
8. 248-7179 [2] SEAL-O-RING  
9. 297-9158 [1] PISTON  
10. 7Y-4633 [2] RING-BACKUP  
11. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
  M   METRIC PART
 

#SEBP52160411
 

203-9303: FRAME AR-UNDERCARRIAGE

203-9303 FRAME AR-UNDERCARRIAGE
S/N GSZ1-UP
CONSISTS OF AN EXTRA LONG 365C UNDERCARRIAGE
PART OF 203-9307 OEM AR-MOBILE HYD POWER UNIT
i03245779 SEBP5216
  For full view, you need register

Parts for your 365C L MOBILE HYD POWER UNIT:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  136-2935 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
  261-2792 Y [1] FRAME GP-UNDERCARRIAGE  
  230-4174 Y [1] GEAR & BEARING GP-SWING  
  284-7291 Y [1] GUARD GP-SWIVEL  
  141-3748 Y [1] GUARD GP-TRACK GUIDE (CENTER)  
  204-5682 Y [1] GUARD GP-TRAVEL MOTOR  
  136-2427 Y [1] IDLER GP-FRONT  
    -OR-
  297-9127 Y [1] IDLER GP-FRONT  
  204-5681 Y [1] LINES GP-TRAVEL MOTOR  
  201-2580 Y [1] ROLLER AR-TRACK & CARRIER  
  136-2461 Y [2] SPROCKET GP (NON-SEGMENTED)  
  203-9304 Y [2] TRACK GP  
   
  7X-2580 M [40] BOLT (M30X3.5X90-MM)  
  9X-8258 [40] WASHER (33X56X6-MM THK)  
    (TO FASTEN FINAL DRIVE)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52160412
 

276-6285: FRAME AR-UNDERCARRIAGE

276-6285 FRAME AR-UNDERCARRIAGE -345, ADJ GAUGE, H-CARBODY
S/N GSZ1-UP
FOR USE WITH 365C UPPER
AN ATTACHMENT
i03527165 SEBP5216
  For full view, you need register

Parts for your 365C L MOBILE HYD POWER UNIT:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  276-6286 Y [1] FRAME GP-UNDERCARRIAGE  
  276-6287 Y [1] LINES GP-TRAVEL MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52160413
 

315-1645: FRAME AR-UNDERCARRIAGE

315-1645 FRAME AR-UNDERCARRIAGE -345C, ADJ GAUGE, H-CARBODY
S/N GSZ1-UP
AN ATTACHMENT
i03998676 SEBP5216
  For full view, you need register

Parts for your 365C L MOBILE HYD POWER UNIT:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  315-1638 Y [1] FRAME GP-UNDERCARRIAGE  
  276-6287 Y [1] LINES GP-TRAVEL MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP52160414
 

261-2792: FRAME GP-UNDERCARRIAGE

261-2792 FRAME GP-UNDERCARRIAGE
S/N GSZ1-UP
PART OF 203-9303 FRAME AR-UNDERCARRIAGE
i02845426 SEBP5216
2612792 FRAME GP-UNDERCARRIAGE Parts scheme
  For full view, you need register

Parts for your 365C L MOBILE HYD POWER UNIT:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8147 B [12] PLUG  
2. 107-9711 [4] SPACER (37X70X65-MM THK)  
3. 109-8506 [16] SPACER (37X70X50-MM THK)  
4. 147-3828 [4] PLATE  
5. 147-3830 [8] SPACER (37X70X60-MM THK)  
6. 151-0562 [1] FRAME AS-CARBODY  
7. 261-2795 [1] FRAME AS (LH)  
8. 261-2793 [1] FRAME AS (RH)  
9. 234-3788 [3] STEP  
10. 234-3789 [3] STEP  
11. 235-7695 [1] STEP AS  
12. 235-7696 [1] STEP AS  
13. 147-2001 M [4] BOLT (M36X4X100-MM)  
14. 7X-2552 M [8] BOLT (M16X2X30-MM)  
15. 7Y-5245 M [44] BOLT (M36X4X150-MM)  
16. 7Y-8942 [2] PLATE  
17. 8T-7338 M [32] BOLT (M16X2X45-MM)  
18. 9X-8257 [40] WASHER (17.5X30X3.5-MM THK)  
19. 9X-8259 [20] WASHER (39X66X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP52160415
 

276-6286: FRAME GP-UNDERCARRIAGE

276-6286 FRAME GP-UNDERCARRIAGE -ADJUSTABLE GAUGE
S/N GSZ1-UP
PART OF 276-6285 FRAME AR-UNDERCARRIAGE
Type 1
AN ATTACHMENT
i03528162 SEBP5216
2766286 FRAME GP-UNDERCARRIAGE Parts scheme
  For full view, you need register

Parts for your 365C L MOBILE HYD POWER UNIT:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Q-5691 [2] VALVE  
2. 6V-0406 [2] SEAL-BONDED  
3. 095-0692 M [16] BOLT-SOCKET HEAD (M14X2X110-MM)  
4. 124-3296 [2] SPROCKET-TRACK  
5. 124-7280 Y [4] ROLLER GP-TRACK CARRIER  
6. 152-0865 [2] COVER  
7. 163-4839 [2] VALVE GP-CONTROL  
8. 178-7293 Y [28] ROLLER GP-TRACK-SINGLE FLANGE  
9. 200-0372 Y [2] TRACK GP  
10. 200-0396 [4] BLOCK  
11. 200-0397 [4] GUARD AS-TRACK GUIDE  
12. 200-0401 [4] CYLINDER  
13. 200-0404 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
14. 200-0409 Y [2] TRACK ADJUSTER & RECOIL GP  
15. 200-0411 [4] COVER  
16. 200-0412 [4] PIN-CYLINDER  
17. 200-0413 [8] LOCK AS  
18. 200-0414 [4] PIN AS  
19. 200-0417 [4] PIN AS  
20. 200-0494 [2] STEP AS  
21. 200-0495 [2] PIN  
22. 216-2359 [2] PLATE  
23. 248-7151 Y [2] IDLER GP (FRONT)  
24. 276-6288 [1] FRAME AS-CARBODY  
25. 276-6292 [1] FRAME AS-UNDERCARRIAGE (RH)  
26. 276-6293 [1] FRAME AS-UNDERCARRIAGE (LH)  
27. 148-4703 [1] COVER  
28. 148-4704 [1] GASKET  
29. 3B-4631 [4] PIN-COTTER  
30. 3T-0852 M [4] LOCKNUT (M8X1.25-THD)  
31. 7X-2454 M [60] BOLT (M24X3X110-MM)  
32. 7X-2553 M [16] BOLT (M16X2X40-MM)  
33. 7X-2565 M [8] BOLT (M20X2.5X100-MM)  
34. 7X-2575 M [56] BOLT (M24X3X60-MM)  
35. 8T-0363 M [112] BOLT (M24X3X120-MM)  
36. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
38. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
39. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
40. 8T-4167 [228] WASHER-HARD (26X44X4-MM THK)  
41. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
42. 8T-4200 M [8] BOLT (M8X1.25X16-MM)  
43. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
45. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
46. 9X-8268 [8] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52160416
 

276-6286: FRAME GP-UNDERCARRIAGE

276-6286 FRAME GP-UNDERCARRIAGE -ADJUSTABLE GAUGE
S/N GSZ1-UP
PART OF 276-6285 FRAME AR-UNDERCARRIAGE
Type 2
AN ATTACHMENT
i03869109 SEBP5216
2766286 FRAME GP-UNDERCARRIAGE Parts scheme
  For full view, you need register

Parts for your 365C L MOBILE HYD POWER UNIT:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Q-5691 [2] VALVE  
2. 6V-0406 [2] SEAL-BONDED  
3. 095-0692 M [16] BOLT-SOCKET HEAD (M14X2X110-MM)  
4. 124-3296 [2] SPROCKET-TRACK  
5. 300-4610 CY [4] ROLLER GP-TRACK CARRIER  
6. 152-0865 [2] COVER  
7. 163-4839 Y [2] VALVE GP-CONTROL  
8. 178-7293 Y [28] ROLLER GP-TRACK-SINGLE FLANGE  
9. 200-0372 Y [2] TRACK GP  
10. 200-0396 [4] BLOCK  
11. 200-0397 [4] GUARD AS-TRACK GUIDE  
12. 200-0401 [4] CYLINDER  
13. 200-0404 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
14. 200-0409 Y [2] TRACK ADJUSTER & RECOIL GP  
15. 200-0411 [4] COVER  
16. 200-0412 [4] PIN-CYLINDER  
17. 200-0413 [8] LOCK AS  
18. 200-0414 [4] PIN AS  
19. 200-0417 [4] PIN AS  
20. 200-0494 [2] STEP AS  
21. 200-0495 [2] PIN  
22. 216-2359 [2] PLATE  
23. 248-7151 Y [2] IDLER GP (FRONT)  
24. 276-6288 [1] FRAME AS-CARBODY  
25. 276-6292 [1] FRAME AS-UNDERCARRIAGE (RH)  
26. 276-6293 [1] FRAME AS-UNDERCARRIAGE (LH)  
27. 148-4703 [1] COVER  
28. 148-4704 [1] GASKET  
29. 3B-4631 [4] PIN-COTTER  
30. 3T-0852 M [4] LOCKNUT (M8X1.25-THD)  
31. 7X-2454 M [60] BOLT (M24X3X110-MM)  
32. 7X-2553 M [16] BOLT (M16X2X40-MM)  
33. 7X-2565 M [8] BOLT (M20X2.5X100-MM)  
34. 7X-2575 M [56] BOLT (M24X3X60-MM)  
35. 8T-0363 M [112] BOLT (M24X3X120-MM)  
36. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
38. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
39. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
40. 8T-4167 [228] WASHER-HARD (26X44X4-MM THK)  
41. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
42. 8T-4200 M [8] BOLT (M8X1.25X16-MM)  
43. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
45. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
46. 9X-8268 [8] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52160417
 

315-1638: FRAME GP-UNDERCARRIAGE

315-1638 FRAME GP-UNDERCARRIAGE -ADJUSTABLE GAUGE
S/N GSZ1-UP
PART OF 315-1645 FRAME AR-UNDERCARRIAGE
Type 1
AN ATTACHMENT
i03998684 SEBP5216
3151638 FRAME GP-UNDERCARRIAGE Parts scheme
  For full view, you need register

Parts for your 365C L MOBILE HYD POWER UNIT:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Q-5691 [2] VALVE  
2. 6V-0406 [2] SEAL-BONDED  
3. 095-0692 M [16] BOLT-SOCKET HEAD (M14X2X110-MM)  
4. 124-3296 [2] SPROCKET-TRACK  
5. 300-4610 Y [4] ROLLER GP-TRACK CARRIER  
6. 152-0865 [2] COVER  
7. 163-4839 Y [2] VALVE GP-CONTROL  
8. 178-7293 Y [28] ROLLER GP-TRACK-SINGLE FLANGE  
9. 200-0372 Y [2] TRACK GP  
10. 200-0396 [4] BLOCK  
11. 200-0397 [4] GUARD AS-TRACK GUIDE  
12. 200-0401 [4] CYLINDER  
13. 315-1639 Y [2] DRIVE GP-FINAL  
14. 200-0409 Y [2] TRACK ADJUSTER & RECOIL GP  
15. 200-0411 [4] COVER  
16. 200-0412 [4] PIN-CYLINDER  
17. 200-0413 [8] LOCK AS  
18. 200-0414 [4] PIN AS  
19. 200-0417 [4] PIN AS  
20. 200-0494 [2] STEP AS  
21. 200-0495 [2] PIN  
22. 216-2359 [2] PLATE  
23. 248-7151 Y [2] IDLER GP (FRONT)  
24. 276-6288 [1] FRAME AS-CARBODY  
25. 276-6292 [1] FRAME AS-UNDERCARRIAGE (RH)  
26. 276-6293 [1] FRAME AS-UNDERCARRIAGE (LH)  
27. 148-4703 [1] COVER  
28. 148-4704 [1] GASKET  
29. 3B-4631 [4] PIN-COTTER  
30. 3T-0852 M [4] LOCKNUT (M8X1.25-THD)  
31. 7X-2454 M [60] BOLT (M24X3X110-MM)  
32. 7X-2553 M [16] BOLT (M16X2X40-MM)  
33. 7X-2565 M [8] BOLT (M20X2.5X100-MM)  
34. 7X-2575 M [56] BOLT (M24X3X60-MM)  
35. 8T-0363 M [112] BOLT (M24X3X120-MM)  
36. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
38. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
39. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
40. 8T-4167 [228] WASHER-HARD (26X44X4-MM THK)  
41. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
42. 8T-4200 M [8] BOLT (M8X1.25X16-MM)  
43. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
45. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
46. 9X-8268 [8] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52160418
 

315-1638: FRAME GP-UNDERCARRIAGE

315-1638 FRAME GP-UNDERCARRIAGE -ADJUSTABLE GAUGE
S/N GSZ1-UP
PART OF 315-1645 FRAME AR-UNDERCARRIAGE
Type 2
AN ATTACHMENT
i05259921 SEBP5216
3151638 FRAME GP-UNDERCARRIAGE Parts scheme
  For full view, you need register

Parts for your 365C L MOBILE HYD POWER UNIT:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Q-5691 [2] VALVE  
2. 6V-0406 [2] SEAL-BONDED  
3. 095-0692 M [16] BOLT-SOCKET HEAD (M14X2X110-MM)  
4. 124-3296 [2] SPROCKET-TRACK  
5. 300-4610 Y [4] ROLLER GP-TRACK CARRIER  
6. 152-0865 [2] COVER  
7. 163-4839 Y [2] VALVE GP-CONTROL  
8. 370-4381 CY [28] ROLLER GP-TRACK-SINGLE FLANGE  
9. 200-0372 Y [2] TRACK GP  
10. 200-0396 [4] BLOCK  
11. 200-0397 [4] GUARD AS-TRACK GUIDE  
12. 200-0401 [4] CYLINDER  
13. 315-1639 Y [2] DRIVE GP-FINAL  
14. 200-0409 Y [2] TRACK ADJUSTER & RECOIL GP  
15. 200-0411 [4] COVER  
16. 200-0412 [4] PIN-CYLINDER  
17. 200-0413 [8] LOCK AS  
18. 200-0414 [4] PIN AS  
19. 200-0417 [4] PIN AS  
20. 200-0494 [2] STEP AS  
21. 200-0495 [2] PIN  
22. 216-2359 [2] PLATE  
23. 248-7151 Y [2] IDLER GP (FRONT)  
24. 276-6288 [1] FRAME AS-CARBODY  
25. 276-6292 [1] FRAME AS-UNDERCARRIAGE (RH)  
26. 276-6293 [1] FRAME AS-UNDERCARRIAGE (LH)  
27. 148-4703 [1] COVER  
28. 148-4704 [1] GASKET  
29. 3B-4631 [4] PIN-COTTER  
30. 3T-0852 M [4] LOCKNUT (M8X1.25-THD)  
31. 7X-2454 M [60] BOLT (M24X3X110-MM)  
32. 7X-2553 M [16] BOLT (M16X2X40-MM)  
33. 7X-2565 M [8] BOLT (M20X2.5X100-MM)  
34. 7X-2575 M [56] BOLT (M24X3X60-MM)  
35. 8T-0363 M [112] BOLT (M24X3X120-MM)  
36. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
38. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
39. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
40. 8T-4167 [228] WASHER-HARD (26X44X4-MM THK)  
41. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
42. 8T-4200 M [8] BOLT (M8X1.25X16-MM)  
43. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
45. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
46. 9X-8268 [8] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP52160419
 

315-1638: FRAME GP-UNDERCARRIAGE

315-1638 FRAME GP-UNDERCARRIAGE -ADJUSTABLE GAUGE
S/N GSZ1-UP
PART OF 315-1645 FRAME AR-UNDERCARRIAGE
Type 3
AN ATTACHMENT
i07177664 SEBP5216
3151638 FRAME GP-UNDERCARRIAGE Parts scheme
  For full view, you need register

Parts for your 365C L MOBILE HYD POWER UNIT:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 508-8366 C [2] VALVE AS  
    (EACH INCLUDES)
  6V-0406 [1] SEAL-BONDED  
3. 095-0692 M [16] BOLT-SOCKET HEAD (M14X2X110-MM)  
4. 124-3296 [2] SPROCKET-TRACK  
5. 300-4610 CY [4] ROLLER GP-TRACK CARRIER  
6. 152-0865 [2] COVER  
7. 457-1131 CY [2] VALVE GP-CONTROL  
8. 370-4381 Y [28] ROLLER GP-TRACK-SINGLE FLANGE  
9. 200-0372 Y [2] TRACK GP  
10. 200-0396 [4] BLOCK  
11. 200-0397 [4] GUARD AS-TRACK GUIDE  
12. 200-0401 [4] CYLINDER  
13. 315-1639 Y [2] DRIVE GP-FINAL  
14. 200-0409 Y [2] TRACK ADJUSTER & RECOIL GP  
15. 200-0411 [4] COVER  
16. 200-0412 [4] PIN-CYLINDER  
17. 200-0413 [8] LOCK AS  
18. 200-0414 [4] PIN AS  
19. 200-0417 [4] PIN AS  
20. 200-0494 [2] STEP AS  
21. 200-0495 [2] PIN  
22. 216-2359 [2] PLATE  
23. 248-7151 Y [2] IDLER GP (FRONT)  
24. 276-6288 [1] FRAME AS-CARBODY  
25. 276-6292 [1] FRAME AS-UNDERCARRIAGE (RH)  
26. 276-6293 [1] FRAME AS-UNDERCARRIAGE (LH)  
27. 148-4703 [1] COVER  
28. 148-4704 [1] GASKET  
29. 3B-4631 [4] PIN-COTTER  
30. 3T-0852 M [4] LOCKNUT (M8X1.25-THD)  
31. 7X-2454 M [60] BOLT (M24X3X110-MM)  
32. 7X-2553 M [16] BOLT (M16X2X40-MM)  
33. 7X-2565 M [8] BOLT (M20X2.5X100-MM)  
34. 7X-2575 M [56] BOLT (M24X3X60-MM)  
35. 8T-0363 M [112] BOLT (M24X3X120-MM)  
36. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
38. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
39. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
40. 8T-4167 [228] WASHER-HARD (26X44X4-MM THK)  
41. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
42. 8T-4200 M [8] BOLT (M8X1.25X16-MM)  
43. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
45. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
46. 9X-8268 [8] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158}
Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TRACK ADJUSTMENT GROUP ON CERTAIN 336D, 345D, 365C, 374D, 385C, AND 390D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TRACK ADJUSTMENT GROUP ON CERTAIN 336D, 345D, 365C, 374D, 385C, AND 390D EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Improvements Have Been Made to Manufacturing Processes of the Piston for the Track Adjuster on Certain Excavators and Mobile Hydraulic Power Units {4157}
2012/01/03

Caterpillar Parts SIS Catalog 365C L :

ADJUSTMENT GP-HYDRAULIC TRACK
136-2430 ADJUSTMENT GP-HYDRAULIC TRACK
SUPPORT GP-HOOD
256-1953 SUPPORT GP-HOOD
SUPPORT GP-HOOD
256-1953 SUPPORT GP-HOOD
SUPPORT GP-HOOD
256-1953 SUPPORT GP-HOOD
SUPPORT GP-HOOD
237-8401 SUPPORT GP-HOOD
SUPPORT GP-HOOD
237-8400 SUPPORT GP-HOOD
SUPPORT AS-ENCLOSURE
293-6962 SUPPORT AS-ENCLOSURE
SUPPORT AS-ENCLOSURE
256-1540 SUPPORT AS-ENCLOSURE
203-9303 FRAME AR-UNDERCARRIAGE
276-6285 FRAME AR-UNDERCARRIAGE
315-1645 FRAME AR-UNDERCARRIAGE
FRAME GP-UNDERCARRIAGE
261-2792 FRAME GP-UNDERCARRIAGE
FRAME GP-UNDERCARRIAGE
276-6286 FRAME GP-UNDERCARRIAGE
FRAME GP-UNDERCARRIAGE
276-6286 FRAME GP-UNDERCARRIAGE
FRAME GP-UNDERCARRIAGE
315-1638 FRAME GP-UNDERCARRIAGE
FRAME GP-UNDERCARRIAGE
315-1638 FRAME GP-UNDERCARRIAGE

Truck sale:

Caterpillar 365CL, Construction
200,000 
Caterpillar 365CL, Construction
- Crawler Excavators
CATERPILLAR FINANCIAL SERVICES CORPORATION
Caterpillar 365CL, Construction
190,000 
Caterpillar 365CL, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 365CL, Construction
157,500 
Caterpillar 365CL, Construction
- Crawler Excavators
MICHIGAN CAT
Caterpillar 365CL, Construction
269,500 
Caterpillar 365CL, Construction
- Crawler Excavators
HAWTHORNE MACHINERY CO.
Caterpillar 365CL, Construction
333,000 
Caterpillar 365CL, Construction
- Crawler Excavators
NMC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.