ELECTRICAL AND STARTING SYSTEM
LIGHTING GPCAMERA GP
SENSOR GP
PANEL GP-CIRCUIT BREAKER
OPERATOR STATION
CONSOLE GPELECTRICAL AND STARTING SYSTEM
LIGHTING GP
#SEBP52330290
299-3014: LIGHTING GP-FLOOD
299-3014 LIGHTING GP-FLOOD -BOOM
S/N WAG1-UP
Type 2
FOR USE WITH @@@@@303-2690@@@@@
CANNOT BE USED WITH @@@@@303-2688@@@@@, @@@@@303-2689@@@@@
S/N WAG1-UP
Type 2
FOR USE WITH @@@@@303-2690@@@@@
CANNOT BE USED WITH @@@@@303-2688@@@@@, @@@@@303-2689@@@@@
For full view, you need register
Parts for your 390D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-4836 | [21] | CLIP | |
| 2. | 111-4837 | [1] | CLIP | |
| 3. | 116-0118 | [1] | CLIP | |
| 4. | 347-9427 CY | [4] | LAMP GP-FLOOD (24-VOLT, 35-WATT, HID) | |
| 5. | 442-7500 C | [1] | BRACKET AS | |
| 6. | 442-7501 C | [1] | BRACKET AS | |
| 7. | 444-2797 C | [1] | HARNESS AS-LIGHTING | |
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)((7-CM)) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)((10-CM)) | |||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8. | 3S-2093 C | [8] | STRAP-CABLE | |
| 9. | 7X-2548 CM | [2] | BOLT (M12X1.75X16-MM) | |
| 10. | 8T-4121 | [23] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4133 M | [19] | NUT (M10X1.5-THD) | |
| 12. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 13. | 8T-4139 CM | [4] | BOLT (M12X1.75X30-MM) | |
| 14. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 15. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP52330291
299-3015: LIGHTING GP-FLOOD
299-3015 LIGHTING GP-FLOOD -BOOM
S/N WAG1-UP
Type 1
FOR USE WITH @@@@@303-2689@@@@@
CANNOT BE USED WITH @@@@@303-2688@@@@@, @@@@@303-2690@@@@@
S/N WAG1-UP
Type 1
FOR USE WITH @@@@@303-2689@@@@@
CANNOT BE USED WITH @@@@@303-2688@@@@@, @@@@@303-2690@@@@@
For full view, you need register
Parts for your 390D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 111-4836 | [17] | CLIP | |
| 3. | 111-4837 | [1] | CLIP | |
| 4. | 116-0118 | [1] | CLIP | |
| 5. | 306-8328 | [2] | BRACKET AS | |
| 6. | 306-8332 | [2] | SHEET | |
| 7. | 332-9402 Y | [2] | LAMP GP-FLOOD (24-VOLT, 35-WATT, HID) | |
| 8. | 347-9427 Y | [2] | LAMP GP-FLOOD (24-VOLT, 35-WATT, HID) | |
| 9. | 350-8412 | [1] | HARNESS AS-LIGHTING | |
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 BE | TUBE-HEAT SHRINK (10.85-MM DIA) | |||
| 125-7875 BE | TUBE-HEAT SHRINK (7.44-MM DIA) | |||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE& INTERFACE SEAL) | ||||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 10. | 5C-9553 M | [12] | BOLT (M6X1X16-MM) | |
| 11. | 8P-8540 | [2] | GROMMET | |
| 12. | 8T-4121 | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4133 M | [15] | NUT (M10X1.5-THD) | |
| 14. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 15. | 8T-4179 M | [6] | BOLT (M12X1.75X20-MM) | |
| 16. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 17. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 9X-8256 | [12] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP52330292
299-3015: LIGHTING GP-FLOOD
299-3015 LIGHTING GP-FLOOD -BOOM
S/N WAG1-UP
Type 2
FOR USE WITH @@@@@303-2689@@@@@
CANNOT BE USED WITH @@@@@303-2688@@@@@, @@@@@303-2690@@@@@
S/N WAG1-UP
Type 2
FOR USE WITH @@@@@303-2689@@@@@
CANNOT BE USED WITH @@@@@303-2688@@@@@, @@@@@303-2690@@@@@
For full view, you need register
Parts for your 390D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-4836 | [17] | CLIP | |
| 2. | 111-4837 | [1] | CLIP | |
| 3. | 116-0118 | [1] | CLIP | |
| 4. | 347-9427 CY | [4] | LAMP GP-FLOOD (24-VOLT, 35-WATT, HID) | |
| 5. | 442-7500 C | [1] | BRACKET AS | |
| 6. | 442-7501 C | [1] | BRACKET AS | |
| 7. | 444-2798 C | [1] | HARNESS AS-LIGHTING | |
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8. | 3S-2093 | [8] | STRAP-CABLE | |
| 9. | 7X-2548 M | [2] | BOLT (M12X1.75X16-MM) | |
| 10. | 8T-4121 | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4133 M | [15] | NUT (M10X1.5-THD) | |
| 12. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 13. | 8T-4139 CM | [4] | BOLT (M12X1.75X30-MM) | |
| 14. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 15. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP52330293
307-7757: MOUNTING GP-CAMERA
For full view, you need register
Parts for your 390D L EXCAVATOR:
CATERPILLAR SIS#SEBP52330294
320-5621: MOUNTING GP-CAMERA
For full view, you need register
Parts for your 390D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 327-3087 | [1] | BRACKET |
#SEBP52330295
328-0107: MOUNTING GP-CAMERA
For full view, you need register
Parts for your 390D L EXCAVATOR:
CATERPILLAR SIS#SEBP52330296
197-7415: MOUNTING GP-SENSOR
197-7415 MOUNTING GP-SENSOR -ATMOSPHERIC, ENGINE OIL
S/N TXH1-UP; RHX6011-UP
PART OF 283-2438, 286-9798, 349-4446 ENGINE AR-COMPLETE
S/N TXH1-UP; RHX6011-UP
PART OF 283-2438, 286-9798, 349-4446 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 390D L EXCAVATOR:
CATERPILLAR SIS#SEBP52330297
349-5418: MOUNTING GP-SENSOR
For full view, you need register
Parts for your 390D L EXCAVATOR:
CATERPILLAR SIS#SEBP52330298
299-2627: PANEL GP-CIRCUIT BREAKER
299-2627 PANEL GP-CIRCUIT BREAKER
S/N WAG1-UP
PART OF 299-2635 BATTERY & WIRING GP
S/N WAG1-UP
PART OF 299-2635 BATTERY & WIRING GP
For full view, you need register
Parts for your 390D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-8320 | [1] | PLATE-INSTRUCTION (BATTERY) | |
| 2. | 3S-2093 | [9] | STRAP-CABLE | |
| 3. | 7I-2673 | [1] | STRAP-CABLE | |
| 4. | 7N-0719 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 5. | 7Y-5499 | [1] | BLOCK AS-TERMINAL | |
| 6. | 9G-8451 | [1] | BLOCK AS | |
| 1H-3244 | [1] | LOCKWASHER | ||
| 4B-4276 | [2] | WASHER (7X16X1.6-MM THK) | ||
| 4L-7124 | [1] | BOLT (1/4-20X1.25-IN) | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 7. | 9R-7941 | [1] | SOCKET AS | |
| 9R-7980 | [1] | COVER | ||
| 8. | 105-9983 | [2] | CLIP | |
| 9. | 105-9986 | [2] | CLIP | |
| 10. | 106-0193 | [1] | RESISTOR AS | |
| 11. | 113-8490 | [21] | FUSE (10-AMPERE) | |
| 12. | 113-8491 | [11] | FUSE (15-AMPERE) | |
| 13. | 124-3548 | [2] | FUSE (30-AMPERE) | |
| 14. | 125-1302 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 15. | 136-4055 | [1] | STRIP | |
| 16. | 141-2759 | [4] | FUSE (5-AMPERE) | |
| 17. | 145-3084 | [1] | RESISTOR AS | |
| 18. | 149-5050 | [1] | RELAY (24-VOLT) | |
| 19. | 151-9360 | [2] | RESISTOR AS | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 20. | 161-3128 | [8] | RELAY (24-VOLT) | |
| 21. | 163-6704 | [1] | TIMER AS (TIME DELAY LIGHTING)(TIME DELAY LIGHTING) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE AS INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 22. | 167-3593 | [1] | STRAP | |
| 23. | 170-6888 | [1] | PULLER-FUSE | |
| 24. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 25. | 171-2212 | [1] | CIRCUIT BREAKER AS (105-AMPERE) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 1H-3244 | [2] | LOCKWASHER | ||
| 26. | 213-0772 | [1] | SWITCH AS-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 27. | 234-1194 | [1] | WIRE AS | |
| 28. | 234-1196 | [1] | WIRE AS | |
| 29. | 234-1198 | [1] | WIRE AS | |
| 30. | 234-1199 | [1] | WIRE AS | |
| 31. | 238-2392 | [2] | BAR-BUS | |
| 32. | 238-2526 | [1] | COVER | |
| 33. | 328-0213 | [1] | BRACKET AS | |
| 34. | 328-0307 | [1] | WIRE AS | |
| 35. | 328-0308 | [1] | WIRE AS | |
| 36. | 342-2890 | [1] | HARNESS AS-PANEL | |
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [15] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [43] | STRAP-CABLE | ||
| 9X-0196 | [1] | TERMINAL AS (16-GA) | ||
| 7Y-3951 | [31] | TERMINAL-BLADE (14-GA)(FEMALE) | ||
| 7Y-3952 | [16] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3963 | [7] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3993 | [1] | TERMINAL-BLADE (12-GA)(FEMALE) | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9W-0852 | [13] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [24] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 BE | TUBE-HEAT SHRINK (10.85-MM DIA) | |||
| 121-1022 | [16] | DIODE | ||
| 125-7875 BE | TUBE-HEAT SHRINK (7.44-MM DIA) | |||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8065 | [3] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8066 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 2L-8067 | [4] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8076 | [13] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 9X-3401 | [24] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 149-5051 | [10] | CONNECTOR-RECEPTACLE | ||
| 149-5069 | [12] | TERMINAL-BLADE (14-GA TO 20-GA)(FEMALE) | ||
| 149-5070 | [20] | TERMINAL-BLADE (16-GA TO 20-GA)(FEMALE) | ||
| 149-5071 | [8] | TERMINAL-BLADE (12-GA TO 14-GA)(FEMALE) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 170-6890 | [10] | TERMINAL-BLADE (14-GA) | ||
| 170-6891 | [18] | TERMINAL-BLADE (16-GA TO 18-GA) | ||
| 183-1000 | [1] | PANEL AS-FUSE | ||
| 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 239-7356 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4510 | [2] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 272-5000 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 37. | 095-0735 M | [14] | SCREW-MACHINE (M5X0.8X8-MM) | |
| 38. | 096-4833 M | [2] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 39. | 096-5962 | [4] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 40. | 096-6166 | [8] | WASHER-HARD (4.5X9X1-MM THK) | |
| 41. | 111-4874 | [1] | COVER | |
| 42. | 3E-8048 M | [4] | SCREW-MACHINE (M3X0.5X6-MM) | |
| 43. | 6V-5645 | [4] | SCREW-MACHINE (10-32X0.87-IN) | |
| 44. | 7X-2619 M | [5] | BOLT (M6X1X10-MM) | |
| 45. | 8C-7581 M | [8] | SCREW-MACHINE (M4X0.7X8-MM) | |
| 46. | 8T-0328 | [20] | WASHER-HARD (5.5X10X1-MM THK) | |
| 47. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 48. | 8T-4171 M | [6] | BOLT (M6X1X12-MM) | |
| 49. | 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | |
| 50. | 8T-4970 M | [4] | BOLT (M6X1X14-MM) | |
| 51. | 8T-6411 M | [12] | SCREW-MACHINE (M6X1X12-MM) | |
| 52. | 9X-8256 | [27] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP52330299
251-0542: PANEL GP-SWITCH
251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N WAG1-UP
PART OF 340-4002, 340-4003, 340-4004, 366-6256, 366-6257, 366-6258 OPTION AR-CAB
Type 1
S/N WAG1-UP
PART OF 340-4002, 340-4003, 340-4004, 366-6256, 366-6257, 366-6258 OPTION AR-CAB
Type 1
For full view, you need register
Parts for your 390D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 319-4420 CY | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 4. | 170-9324 | [1] | LAMP AS-INDICATOR (24-VOLT, 3-WATT) | |
| 5. | 185-9208 | [1] | KNOB AS (THROTTLE POSITION) | |
| 6. | 234-1156 | [1] | COVER | |
| 7. | 234-1158 | [1] | COVER | |
| 8. | 267-7976 | [1] | PANEL | |
| 9. | 328-0021 C | [1] | HARNESS AS-CONSOLE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [14] | TERMINAL (MALE) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 153-2540 | [10] | TERMINAL (FEMALE) | ||
| 153-2541 | [1] | PLUG-CONNECTOR (10-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 6V-9491 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
