303-8946 FRAME GP-UPPER S/N PJA1-UP PART OF 319-9260 SPECIAL AR AN ATTACHMENT 374D L EXCAVATOR

FRAME AND BODY

FRAME GP

0. 303-8946 FRAME GP-U

GEAR & BEARING GP

1. 296-6176 GEAR & BEA
2. 436-2846 GEAR & BEA

GUARD GP

3. 313-7810 GUARD GP-B
4. 284-7291 GUARD GP-S

HANDRAIL GP

5. 223-3008 HANDRAIL G
6. 223-3008 HANDRAIL G
7. 249-7108 HANDRAIL G
8. 259-3906 HANDRAIL G
9. 259-3906 HANDRAIL G
0. INFORMATION

EXCAVATOR 374D L EXCAVATOR PJA
374D L Excavator PJA00001-UP (MACHINE) POWERED BY C15 Engine SEBP5241 374D L PJA (2010)

FRAME AND BODY

FRAME GP

297-7537 FRAME GP-UPPER

303-8946 FRAME GP-UPPER

#SEBP52410320

303-8946: FRAME GP-UPPER

FRAME GP-UPPER

303-8946 FRAME GP-UPPER
S/N PJA1-UP
PART OF 319-9260 SPECIAL AR
AN ATTACHMENT

i03656988 SEBP5241

For full view, you need register

Parts for your 374D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	1K-8850	[2]	SPRING
2.	5V-3854	[2]	BUMPER
3.	087-3765	[1]	DOOR AS
	4K-8501	[2]	CLIP
3A.	9V-3659	[1]	HINGE
4.	364-4974 B	[2]	SHIM (1-MM THK)
5.	364-4975 B	[1]	SHIM (2-MM THK)
6.	364-4976 B	[1]	SHIM (0.5-MM THK)
7.	201-2771	[2]	WASHER (26X90X8-MM THK)
8.	367-1432	[2]	PIN AS
9.	208-1972 B	[2]	SHIM (0.5-MM THK)
10.	208-1973 B	[4]	SHIM (1-MM THK)
11.	208-1974 B	[2]	SHIM (2-MM THK)
12.	254-2869	[1]	DOOR AS
	4K-8501	[2]	CLIP
13.	297-7539	[1]	FRAME AS-UPPER
13A.	151-0474	[1]	BOSS
14.	308-8952	[1]	PLATE
15.	308-8953	[1]	PLATE
16.	359-5684	[1]	PIN AS
17.	093-0377	[3]	SPACER (143X210X14-MM THK)
18.	096-4885 M	[2]	LOCKNUT (M16X2-THD)
19.	5A-3604 M	[4]	BOLT-SOCKET HEAD (M8X1.25X25-MM)
20.	7X-2573 M	[2]	BOLT (M24X3X40-MM)
21.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
22.	8T-4133 M	[2]	NUT (M10X1.5-THD)
23.	8T-4140 M	[2]	BOLT (M16X2X60-MM)
24.	8T-4167	[3]	WASHER-HARD (26X44X4-MM THK)
25.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
26.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	8T-5379 M	[1]	BOLT (M24X3X50-MM)
28.	8T-5413 M	[2]	STUD-WELD (M10X1.5X25-MM)
29.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)

			THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
	184-5719 F	[1]	PLATE-SKIRT (1100-MM)
	184-5720 F	[1]	PLATE-SKIRT (2000-MM)
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP52410321

296-6176: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

296-6176 GEAR & BEARING GP-SWING
S/N PJA1-155
PART OF 294-1299 FRAME AR-UNDERCARRIAGE

i03655528 SEBP5241

2966176 GEAR & BEARING GP-SWING Parts scheme

For full view, you need register

Parts for your 374D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	5K-9243	[4]	ELBOW-FLARED
3.	7Y-1647	[1]	GASKET
5.	199-4500 M	[37]	BOLT-SPECIAL (M30X3.5X210-MM)
6.	199-4501	[60]	SPACER (31.5X56X5-MM THK)
7.	296-6211	[1]	RETAINER
8.	296-6212	[1]	BOOT AS
9.	296-6213	[1]	RETAINER
10.	296-6214	[1]	RETAINER
11.	296-6254	[37]	SPACER (31.5X56X25-MM THK)
12.	367-8361	[1]	GEAR & BEARING GP (SWING)
	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	148-4685 E		SEAL (495-CM)
	227-6076	[2]	SEAL-DUST
13.	342-1895	[1]	TUBE AS (RH)
14.	342-1896	[1]	TUBE AS (LH)
15.	148-4703	[1]	COVER
16.	148-4704	[1]	GASKET
17.	171-9285 M	[60]	BOLT (M30X3.5X200-MM)
18.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
19.	4N-9170	[4]	CLIP (LOOP)
20.	7Y-1095	[1]	DOWEL
21.	7Y-1648	[1]	STRIP
22.	8T-4121	[22]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
24.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
25.	8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
26.	8T-4199 M	[4]	BOLT (M8X1.25X12-MM)
27.	8T-6757	[2]	PLUG-PIPE
28.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP52410322

436-2846: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

436-2846 GEAR & BEARING GP-SWING
S/N PJA156-UP
PART OF 294-1299 FRAME AR-UNDERCARRIAGE

i05530932 SEBP5241

4362846 GEAR & BEARING GP-SWING Parts scheme

For full view, you need register

Parts for your 374D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	5K-9243	[4]	ELBOW-FLARED
3.	7Y-1647	[1]	GASKET
5.	199-4500 M	[37]	BOLT-SPECIAL (M30X3.5X210-MM)
6.	453-1667	[60]	SPACER (31.5X56X5-MM THK)
7.	296-6211	[1]	RETAINER
8.	296-6212	[1]	BOOT AS
9.	296-6213	[1]	RETAINER
10.	296-6214	[1]	RETAINER
11.	296-6254	[37]	SPACER (31.5X56X25-MM THK)
12.	367-8361	[1]	GEAR & BEARING GP (SWING)
	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	148-4685 E		SEAL (495-CM)
	227-6076	[2]	SEAL-DUST
13.	342-1895	[1]	TUBE AS (RH)
14.	342-1896	[1]	TUBE AS (LH)
15.	148-4703	[1]	COVER
16.	148-4704	[1]	GASKET
17.	171-9285 M	[60]	BOLT (M30X3.5X200-MM)
18.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
19.	4N-9170	[4]	CLIP (LOOP)
20.	7Y-1095	[1]	DOWEL
21.	7Y-1648	[1]	STRIP
22.	8T-4121	[22]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
24.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
25.	8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
26.	8T-4199 M	[4]	BOLT (M8X1.25X12-MM)
27.	8T-6757	[2]	PLUG-PIPE

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART

#SEBP52410323

313-7810: GUARD GP-BOTTOM

GUARD GP-BOTTOM

313-7810 GUARD GP-BOTTOM -LOW NOISE
S/N PJA1-UP
PART OF 294-1230 CHASSIS AR

i03656484 SEBP5241

For full view, you need register

Parts for your 374D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	135-8575	[32]	BOLT AS
2.	135-8577	[29]	BOLT AS
3.	140-1493	[2]	SHEET
4.	237-8427	[1]	SHEET
5.	237-8431	[1]	SHEET
6.	237-8433	[1]	COVER AS
7.	237-8437	[1]	COVER AS
8.	237-8440	[1]	SHEET
9.	237-8441	[1]	SHEET
10.	241-2381	[1]	SHEET AS
11.	250-5135	[1]	SHEET AS
12.	250-5136	[1]	SHEET AS
	124-3243 E		SEAL (70-CM)
13.	250-5137	[1]	SHEET AS
	124-3243 E		SEAL (70-CM)
14.	307-8126	[1]	SHEET AS
15.	313-7820	[1]	SHEET
16.	320-5470	[1]	SHEET
17.	7Y-2853	[29]	SPACER (13X38X5-MM THK)
18.	7Y-2854	[2]	SPACER (24X38X3-MM THK)
	E		ORDER BY THE CENTIMETER

#SEBP52410324

284-7291: GUARD GP-SWIVEL

GUARD GP-SWIVEL

284-7291 GUARD GP-SWIVEL
S/N PJA1-UP
PART OF 294-1299 FRAME AR-UNDERCARRIAGE

i02617746 SEBP5241

For full view, you need register

Parts for your 374D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	284-7292	[2]	COVER AS
2.	284-7293	[1]	COVER AS
3.	453-2836 M	[8]	BOLT (M16X2X45-MM)
4.	451-2175	[8]	WASHER-HARD (17.5X30X3.5-MM THK)
	M		METRIC PART

#SEBP52410325

223-3008: HANDRAIL GP

HANDRAIL GP

223-3008 HANDRAIL GP -FRONT, UPPER
S/N PJA1-152
PART OF 294-1230 CHASSIS AR

i02098331 SEBP5241

For full view, you need register

Parts for your 374D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	135-8577	[20]	BOLT AS
2.	148-4977	[1]	HANDRAIL AS
3.	178-5870	[1]	CLIP (TAB)
4.	178-5871	[1]	CLIP (SLOT)
5.	223-3064	[1]	HANDRAIL AS
6.	223-3067	[1]	HANDRAIL AS
7.	236-3710	[2]	HANDRAIL AS
8.	259-3906 Y	[1]	HANDRAIL GP
9.	259-3905	[1]	SHEET
10.	5P-1076	[16]	WASHER-HARD (13.5X30X4-MM THK)
11.	8T-2920	[1]	GROMMET (27-MM ID)
12.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
13.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
14.	8T-4194 M	[10]	BOLT (M12X1.75X50-MM)
15.	8T-4244 M	[2]	NUT (M12X1.75-THD)
16.	135-8575	[3]	BOLT AS
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP52410326

223-3008: HANDRAIL GP

HANDRAIL GP

223-3008 HANDRAIL GP -FRONT, UPPER
S/N PJA153-UP
PART OF 294-1230 CHASSIS AR

i05363301 SEBP5241

For full view, you need register

Parts for your 374D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	135-8577	[20]	BOLT AS
2.	148-4977	[1]	HANDRAIL AS
3.	178-5870	[1]	CLIP (TAB)
4.	178-5871	[1]	CLIP (SLOT)
5.	418-9257 C	[1]	HANDRAIL AS
6.	418-9258 C	[1]	HANDRAIL AS
7.	418-9259 C	[2]	HANDRAIL AS
8.	259-3906 Y	[1]	HANDRAIL GP
9.	418-9260 C	[1]	SHEET
10.	5P-1076	[16]	WASHER-HARD (13.5X30X4-MM THK)
11.	8T-2920	[1]	GROMMET (27-MM ID)
12.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
13.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
14.	8T-4194 M	[10]	BOLT (M12X1.75X50-MM)
15.	8T-4244 M	[2]	NUT (M12X1.75-THD)
16.	135-8575	[3]	BOLT AS
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP52410327

249-7108: HANDRAIL GP

HANDRAIL GP

249-7108 HANDRAIL GP -CAB
S/N PJA1-UP
PART OF 249-7109 GUARD AR-OVERHEAD
AN ATTACHMENT

i03179229 SEBP5241

For full view, you need register

Parts for your 374D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	331-7263 C	[1]	HANDRAIL AS
2.	229-8062	[4]	SEAL
3.	8T-4179 M	[4]	BOLT (M12X1.75X20-MM)
4.	8T-4192 M	[1]	BOLT (M12X1.75X25-MM)
5.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	8T-4956 M	[1]	BOLT (M12X1.75X35-MM)
			(USE WITH CAB AS WITHOUT WELDED BOSSES)
			-OR-
	8T-4192 M	[1]	BOLT (M12X1.75X25-MM)
			(USE WITH CAB AS WITH WELDED BOSSES)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP52410328

259-3906: HANDRAIL GP

HANDRAIL GP

259-3906 HANDRAIL GP
S/N PJA1-152
PART OF 223-3008 HANDRAIL GP

i02221313 SEBP5241

For full view, you need register

Parts for your 374D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	135-8577	[4]	BOLT AS
2.	135-8578	[2]	BOLT AS
3.	177-5879	[2]	CLAMP
4.	177-5880	[4]	SLEEVE
5.	259-3907	[1]	HANDRAIL
6.	259-3908	[1]	SUPPORT AS

#SEBP52410329

259-3906: HANDRAIL GP

HANDRAIL GP

259-3906 HANDRAIL GP
S/N PJA153-UP
PART OF 223-3008 HANDRAIL GP

i05363328 SEBP5241

For full view, you need register

Parts for your 374D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	135-8577	[4]	BOLT AS
2.	135-8578	[2]	BOLT AS
3.	177-5879	[2]	CLAMP
4.	177-5880	[4]	SLEEVE
5.	418-9261 C	[1]	HANDRAIL
6.	418-9262 C	[1]	SUPPORT AS
	C		CHANGE FROM PREVIOUS TYPE