AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

366-6425 DOOR GP-ACCESS -HYDRAULIC OIL FILTER S/N PAX446-UP PART OF 313-7804 HOOD & GUARD GP 374D L EXCAVATOR


FRAME AND BODY
DOOR GP
FRAME GP
GEAR & BEARING GP
GUARD GP
HANDRAIL GP

EXCAVATOR 374D L EXCAVATOR PAX
 374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine SEBP5242 374D L PAX   (2010)

FRAME AND BODY

DOOR GP
DOOR GP-ACCESS
366-6424 DOOR GP-ACCESS
DOOR GP-ACCESS
366-6425 DOOR GP-ACCESS
DOOR GP-ACCESS
366-6425 DOOR GP-ACCESS
DOOR GP-ACCESS
366-6426 DOOR GP-ACCESS
DOOR GP-ACCESS
366-6426 DOOR GP-ACCESS
 

#SEBP52420370
 

366-6425: DOOR GP-ACCESS

366-6425 DOOR GP-ACCESS -HYDRAULIC OIL FILTER
S/N PAX446-UP
PART OF 313-7804 HOOD & GUARD GP
i05363316 SEBP5242
3666425 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 250-4938 [1] LINER  
2. 250-4939 [1] SHEET-RUBBER  
3. 417-9117 C [1] DOOR AS-ACCESS (PUMP)  
3A. 366-6468 [2] HINGE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP52420371
 

366-6426: DOOR GP-ACCESS

366-6426 DOOR GP-ACCESS -BATTERY, CIRCUIT BREAKER
S/N PAX309-441
PART OF 313-7808 HOOD & GUARD GP
i04319754 SEBP5242
3666426 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 307-7655 [1] LOCK AS  
2. 250-5329 [1] SHEET-RUBBER  
3. 366-6443 [1] DOOR AS-ACCESS  
3A. 366-6468 [2] HINGE  
4. 096-4882 M [6] LOCKNUT (M8X1.25-THD)  
5. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP52420372
 

366-6426: DOOR GP-ACCESS

366-6426 DOOR GP-ACCESS -BATTERY, CIRCUIT BREAKER
S/N PAX442-UP
PART OF 313-7808 HOOD & GUARD GP
i05363315 SEBP5242
3666426 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 396-7961 C [1] LOCK AS  
2. 250-5329 [1] SHEET-RUBBER  
3. 417-9127 C [1] DOOR AS-ACCESS  
3A. 366-6468 [2] HINGE  
4. 096-4882 M [6] LOCKNUT (M8X1.25-THD)  
5. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP52420373
 

297-7537: FRAME GP-UPPER

297-7537 FRAME GP-UPPER
S/N PAX1-UP
PART OF 294-1231 CHASSIS AR
i03656414 SEBP5242
2977537 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-8850 [2] SPRING  
2. 5V-3854 [2] BUMPER  
3. 087-3765 [1] DOOR AS  
  4K-8501 [2] CLIP  
3A. 9V-3659 [1] HINGE  
4. 364-4974 B [2] SHIM (1-MM THK)  
5. 364-4975 B [1] SHIM (2-MM THK)  
6. 364-4976 B [1] SHIM (0.5-MM THK)  
7. 201-2771 [3] WASHER (26X90X8-MM THK)  
8. 367-1432 [2] PIN AS  
9. 208-1972 B [2] SHIM (0.5-MM THK)  
10. 208-1973 B [4] SHIM (1-MM THK)  
11. 208-1974 B [2] SHIM (2-MM THK)  
12. 359-5666 [1] PIN AS  
13. 254-2869 [1] DOOR AS  
  4K-8501 [2] CLIP  
14. 297-7539 [1] FRAME AS-UPPER  
14A. 151-0474 [1] BOSS  
15. 093-0377 [3] SPACER (143X210X14-MM THK)  
16. 453-2852 M [3] BOLT (M24X3X40-MM)  
17. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4133 M [2] NUT (M10X1.5-THD)  
19. 451-2177 [3] WASHER-HARD (26X44X4-MM THK)  
20. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
21. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-5413 M [2] STUD-WELD (M10X1.5X25-MM)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  184-5719 F [1] PLATE-SKIRT (1100-MM)  
  184-5720 F [1] PLATE-SKIRT (2000-MM)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP52420374
 

303-8946: FRAME GP-UPPER

303-8946 FRAME GP-UPPER
S/N PAX1-UP
PART OF 319-9260 SPECIAL AR
AN ATTACHMENT
i03656988 SEBP5242
3038946 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-8850 [2] SPRING  
2. 5V-3854 [2] BUMPER  
3. 087-3765 [1] DOOR AS  
  4K-8501 [2] CLIP  
3A. 9V-3659 [1] HINGE  
4. 364-4974 B [2] SHIM (1-MM THK)  
5. 364-4975 B [1] SHIM (2-MM THK)  
6. 364-4976 B [1] SHIM (0.5-MM THK)  
7. 201-2771 [2] WASHER (26X90X8-MM THK)  
8. 367-1432 [2] PIN AS  
9. 208-1972 B [2] SHIM (0.5-MM THK)  
10. 208-1973 B [4] SHIM (1-MM THK)  
11. 208-1974 B [2] SHIM (2-MM THK)  
12. 254-2869 [1] DOOR AS  
  4K-8501 [2] CLIP  
13. 297-7539 [1] FRAME AS-UPPER  
13A. 151-0474 [1] BOSS  
14. 308-8952 [1] PLATE  
15. 308-8953 [1] PLATE  
16. 359-5684 [1] PIN AS  
17. 093-0377 [3] SPACER (143X210X14-MM THK)  
18. 096-4885 M [2] LOCKNUT (M16X2-THD)  
19. 5A-3604 M [4] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
20. 7X-2573 M [2] BOLT (M24X3X40-MM)  
21. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4133 M [2] NUT (M10X1.5-THD)  
23. 8T-4140 M [2] BOLT (M16X2X60-MM)  
24. 8T-4167 [3] WASHER-HARD (26X44X4-MM THK)  
25. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
26. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-5379 M [1] BOLT (M24X3X50-MM)  
28. 8T-5413 M [2] STUD-WELD (M10X1.5X25-MM)  
29. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  184-5719 F [1] PLATE-SKIRT (1100-MM)  
  184-5720 F [1] PLATE-SKIRT (2000-MM)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP52420375
 

296-6176: GEAR & BEARING GP-SWING

296-6176 GEAR & BEARING GP-SWING
S/N PAX1-451
PART OF 294-1299 FRAME AR-UNDERCARRIAGE
i03655528 SEBP5242
2966176 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9243 [4] ELBOW-FLARED  
3. 7Y-1647 [1] GASKET  
5. 199-4500 M [37] BOLT-SPECIAL (M30X3.5X210-MM)  
6. 199-4501 [60] SPACER (31.5X56X5-MM THK)  
7. 296-6211 [1] RETAINER  
8. 296-6212 [1] BOOT AS  
9. 296-6213 [1] RETAINER  
10. 296-6214 [1] RETAINER  
11. 296-6254 [37] SPACER (31.5X56X25-MM THK)  
12. 367-8361 [1] GEAR & BEARING GP (SWING)  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  148-4685 E SEAL (495-CM)  
  227-6076 [2] SEAL-DUST  
13. 342-1895 [1] TUBE AS (RH)  
14. 342-1896 [1] TUBE AS (LH)  
15. 148-4703 [1] COVER  
16. 148-4704 [1] GASKET  
17. 171-9285 M [60] BOLT (M30X3.5X200-MM)  
18. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
19. 4N-9170 [4] CLIP (LOOP)  
20. 7Y-1095 [1] DOWEL  
21. 7Y-1648 [1] STRIP  
22. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
24. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
25. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
26. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
27. 8T-6757 [2] PLUG-PIPE  
28. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP52420376
 

436-2846: GEAR & BEARING GP-SWING

436-2846 GEAR & BEARING GP-SWING
S/N PAX452-UP
PART OF 294-1299 FRAME AR-UNDERCARRIAGE
i05530932 SEBP5242
4362846 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9243 [4] ELBOW-FLARED  
3. 7Y-1647 [1] GASKET  
5. 199-4500 M [37] BOLT-SPECIAL (M30X3.5X210-MM)  
6. 453-1667 [60] SPACER (31.5X56X5-MM THK)  
7. 296-6211 [1] RETAINER  
8. 296-6212 [1] BOOT AS  
9. 296-6213 [1] RETAINER  
10. 296-6214 [1] RETAINER  
11. 296-6254 [37] SPACER (31.5X56X25-MM THK)  
12. 367-8361 [1] GEAR & BEARING GP (SWING)  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  148-4685 E SEAL (495-CM)  
  227-6076 [2] SEAL-DUST  
13. 342-1895 [1] TUBE AS (RH)  
14. 342-1896 [1] TUBE AS (LH)  
15. 148-4703 [1] COVER  
16. 148-4704 [1] GASKET  
17. 171-9285 M [60] BOLT (M30X3.5X200-MM)  
18. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
19. 4N-9170 [4] CLIP (LOOP)  
20. 7Y-1095 [1] DOWEL  
21. 7Y-1648 [1] STRIP  
22. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
24. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
25. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
26. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
27. 8T-6757 [2] PLUG-PIPE  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP52420377
 

313-7810: GUARD GP-BOTTOM

313-7810 GUARD GP-BOTTOM -LOW NOISE
S/N PAX1-UP
PART OF 294-1231 CHASSIS AR
i03656484 SEBP5242
3137810 GUARD GP-BOTTOM Parts scheme
  For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8575 [32] BOLT AS  
2. 135-8577 [29] BOLT AS  
3. 140-1493 [2] SHEET  
4. 237-8427 [1] SHEET  
5. 237-8431 [1] SHEET  
6. 237-8433 [1] COVER AS  
7. 237-8437 [1] COVER AS  
8. 237-8440 [1] SHEET  
9. 237-8441 [1] SHEET  
10. 241-2381 [1] SHEET AS  
11. 250-5135 [1] SHEET AS  
12. 250-5136 [1] SHEET AS  
  124-3243 E SEAL (70-CM)  
13. 250-5137 [1] SHEET AS  
  124-3243 E SEAL (70-CM)  
14. 307-8126 [1] SHEET AS  
15. 313-7820 [1] SHEET  
16. 320-5470 [1] SHEET  
17. 7Y-2853 [29] SPACER (13X38X5-MM THK)  
18. 7Y-2854 [2] SPACER (24X38X3-MM THK)  
  E   ORDER BY THE CENTIMETER
 

#SEBP52420378
 

284-7291: GUARD GP-SWIVEL

284-7291 GUARD GP-SWIVEL
S/N PAX1-UP
PART OF 294-1299 FRAME AR-UNDERCARRIAGE
i02617746 SEBP5242
2847291 GUARD GP-SWIVEL Parts scheme
  For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 284-7292 [2] COVER AS  
2. 284-7293 [1] COVER AS  
3. 453-2836 M [8] BOLT (M16X2X45-MM)  
4. 451-2175 [8] WASHER-HARD (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

#SEBP52420379
 

223-3008: HANDRAIL GP

223-3008 HANDRAIL GP -FRONT, UPPER
S/N PAX1-445
PART OF 294-1231 CHASSIS AR
i02098331 SEBP5242
2233008 HANDRAIL GP Parts scheme
  For full view, you need register

Parts for your 374D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8577 [20] BOLT AS  
2. 148-4977 [1] HANDRAIL AS  
3. 178-5870 [1] CLIP (TAB)  
4. 178-5871 [1] CLIP (SLOT)  
5. 223-3064 [1] HANDRAIL AS  
6. 223-3067 [1] HANDRAIL AS  
7. 236-3710 [2] HANDRAIL AS  
8. 259-3906 Y [1] HANDRAIL GP  
9. 259-3905 [1] SHEET  
10. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
11. 8T-2920 [1] GROMMET (27-MM ID)  
12. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
13. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
14. 8T-4194 M [10] BOLT (M12X1.75X50-MM)  
15. 8T-4244 M [2] NUT (M12X1.75-THD)  
16. 135-8575 [3] BOLT AS  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 374D L :

DOOR GP-ACCESS
366-6425 DOOR GP-ACCESS
DOOR GP-ACCESS
366-6424 DOOR GP-ACCESS
DOOR GP-ACCESS
366-6424 DOOR GP-ACCESS
DOOR GP-ACCESS
298-3362 DOOR GP-ACCESS
DOOR GP-ACCESS
298-3360 DOOR GP-ACCESS
DOOR GP-ACCESS
298-3357 DOOR GP-ACCESS
DOOR GP-ACCESS
250-5138 DOOR GP-ACCESS
DOOR GP-ACCESS
250-5138 DOOR GP-ACCESS
DOOR GP-ACCESS
366-6426 DOOR GP-ACCESS
DOOR GP-ACCESS
366-6426 DOOR GP-ACCESS
FRAME GP-UPPER
297-7537 FRAME GP-UPPER
FRAME GP-UPPER
303-8946 FRAME GP-UPPER
GEAR & BEARING GP-SWING
296-6176 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
436-2846 GEAR & BEARING GP-SWING
GUARD GP-BOTTOM
313-7810 GUARD GP-BOTTOM
GUARD GP-SWIVEL
284-7291 GUARD GP-SWIVEL

Truck sale:

Caterpillar 374DL, Construction
233,901 
Caterpillar 374DL, Construction
- Crawler Excavators
TOROMONT CAT
Canada
Caterpillar 374DL, Construction
172,886 
Caterpillar 374DL, Construction
- Crawler Excavators
FINNING CANADA
Canada
Caterpillar 374DL, Construction
558,900 
Caterpillar 374DL, Construction
- Crawler Excavators
FOLEY EQUIPMENT COMPANY
Caterpillar 374DL, Construction
289,000 
Caterpillar 374DL, Construction
- Crawler Excavators
HOLT CAT
Caterpillar 374DL, Construction
278,000 
Caterpillar 374DL, Construction
- Crawler Excavators
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.