AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

364-2742 CONTROL GP-GOVERNOR Type 1 C1.5 INDUSTRIAL ENGINE


FUEL SYSTEM
CONTROL GP-GOVERNOR
FILTER GP-FUEL
GOVERNOR GP

INDUSTRIAL ENGINE C1.5 INDUSTRIAL ENGINE G7P
 C1.5 Industrial Engine G7P00001-UP SEBP5281 C1.5 G7P   (2007)

FUEL SYSTEM

CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
364-2720 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
364-2720 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
364-2742 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
364-2742 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
370-7836 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
370-7836 CONTROL GP-GOVERNOR
 

#SEBP52810210
 

364-2742: CONTROL GP-GOVERNOR

364-2742 CONTROL GP-GOVERNOR
Type 1
i05141352 SEBP5281
3642742 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C1.5 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8916 M [4] BOLT (M6X16-MM)  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [2] WASHER  
6. 153-7983 [1] PIN  
7. 095-1574 [1] SEAL-O-RING  
8. 162-2207 M [1] NUT  
9. 217-7115 [1] CAP (TAMPER RESISTANT)  
10. 423-7724 [1] GASKET  
11. 308-1882 [1] SPRING  
12. 308-1889 M [1] NUT (M10X1.25-THD)  
13. 308-1892 M [1] NUT (M6X1-THD)  
14. 308-1897 [2] RING  
15. 336-2965 [1] SPRING  
16. 308-4266 [1] SHAFT  
17. 309-6729 [1] SEAL-O-RING  
18. 495-0737 [1] BOLT  
19. 311-0655 [1] SPRING  
20. 313-2025 M [1] BOLT-SPECIAL (M10X1.25-MM THD)  
21. 315-5236 [1] BOLT AS  
21A. 153-7987 [1] WASHER  
21B. 191-9297 M [1] NUT (M10X1.25-THD)  
21C. 315-5235 [1] SPRING  
22. 364-7487 [1] SPRING  
23. 321-4249 [1] NUT  
24. 324-3400 [1] LEVER-CONTROL  
25. 330-9189 [1] PLUG  
26. 334-0732 [1] ARM (FRONT HOUSING)  
27. 335-5578 [1] BRACKET  
28. 369-4486 M [2] BOLT (M6X1X35-MM)  
29. 390-3729 [1] LEVER-CONTROL  
30. 390-3731 [1] SHAFT  
31. 425-7065 [1] CAP-TAMPER PROOF  
  M   METRIC PART
 

#SEBP52810211
 

364-2742: CONTROL GP-GOVERNOR

364-2742 CONTROL GP-GOVERNOR
Type 2
i07167241 SEBP5281
3642742 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C1.5 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8916 M [4] BOLT (M6X16-MM)  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [2] WASHER  
6. 153-7983 [1] PIN  
7. 095-1574 [1] SEAL-O-RING  
8. 162-2207 M [1] NUT  
9. 217-7115 [1] CAP (TAMPER RESISTANT)  
10. 423-7724 [1] GASKET  
11. 308-1882 [1] SPRING  
12. 308-1889 M [1] NUT (M10X1.25-THD)  
13. 308-1892 M [1] NUT (M6X1-THD)  
14. 308-1897 C [1] RING  
15. 336-2965 [1] SPRING  
16. 308-4266 [1] SHAFT  
17. 309-6729 [1] SEAL-O-RING  
18. 495-0737 [1] BOLT  
19. 311-0655 [1] SPRING  
20. 313-2025 M [1] BOLT-SPECIAL (M10X1.25-MM THD)  
21. 315-5236 [1] BOLT AS  
21A. 153-7987 [1] WASHER  
21B. 191-9297 M [1] NUT (M10X1.25-THD)  
21C. 315-5235 [1] SPRING  
22. 364-7487 [1] SPRING  
23. 502-9478 C [1] NUT  
24. 324-3400 [1] LEVER-CONTROL  
25. 330-9189 [1] PLUG  
26. 334-0732 [1] ARM (FRONT HOUSING)  
27. 335-5578 [1] BRACKET  
28. 369-4486 M [2] BOLT (M6X1X35-MM)  
29. 390-3729 [1] LEVER-CONTROL  
30. 390-3731 [1] SHAFT  
31. 503-9707 C [1] CAP  
32. 503-9731 C [1] SHROUD  
33. 502-5421 C [1] PIN  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP52810212
 

370-7836: CONTROL GP-GOVERNOR

370-7836 CONTROL GP-GOVERNOR
Type 1
i05141363 SEBP5281
3707836 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C1.5 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8916 M [4] BOLT (M6X16-MM)  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [2] WASHER  
6. 153-7983 [1] PIN  
7. 095-1574 [1] SEAL-O-RING  
8. 162-2207 M [1] NUT  
9. 217-7115 [1] CAP (TAMPER RESISTANT)  
10. 423-7724 [1] GASKET  
11. 308-1882 [1] SPRING  
12. 308-1889 M [1] NUT (M10X1.25-THD)  
13. 308-1892 M [1] NUT (M6X1-THD)  
14. 308-1897 [2] RING  
16. 308-4266 [1] SHAFT  
17. 309-6729 [1] SEAL-O-RING  
18. 495-0737 [1] BOLT  
19. 311-0655 [1] SPRING  
20. 315-5236 [1] BOLT AS  
20A. 153-7987 [1] WASHER  
20B. 191-9297 M [1] NUT (M10X1.25-THD)  
20C. 315-5235 [1] SPRING  
21. 317-7195 [1] SPRING  
22. 319-3250 [1] SENSOR-SPEED  
23. 321-4249 [1] NUT  
24. 324-3400 [1] LEVER-CONTROL  
25. 330-9189 [1] PLUG  
26. 334-0732 [1] ARM (FRONT HOUSING)  
27. 335-5578 [1] BRACKET  
28. 369-4486 M [2] BOLT (M6X1X35-MM)  
29. 390-3729 [1] LEVER-CONTROL  
30. 390-3731 [1] SHAFT  
31. 425-7065 [1] CAP-TAMPER PROOF  
32. 336-2965 [1] SPRING  
  M   METRIC PART
 

#SEBP52810213
 

370-7836: CONTROL GP-GOVERNOR

370-7836 CONTROL GP-GOVERNOR
Type 2
i07160698 SEBP5281
3707836 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C1.5 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8916 M [4] BOLT (M6X16-MM)  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [2] WASHER  
6. 153-7983 [1] PIN  
7. 095-1574 [1] SEAL-O-RING  
8. 162-2207 M [1] NUT  
9. 217-7115 [1] CAP (TAMPER RESISTANT)  
10. 423-7724 [1] GASKET  
11. 308-1882 [1] SPRING  
12. 308-1889 M [1] NUT (M10X1.25-THD)  
13. 308-1892 M [1] NUT (M6X1-THD)  
14. 308-1897 C [1] RING  
16. 308-4266 [1] SHAFT  
17. 309-6729 [1] SEAL-O-RING  
18. 495-0737 [1] BOLT  
19. 311-0655 [1] SPRING  
20. 315-5236 [1] BOLT AS  
20A. 153-7987 [1] WASHER  
20B. 191-9297 M [1] NUT (M10X1.25-THD)  
20C. 315-5235 [1] SPRING  
21. 317-7195 [1] SPRING  
22. 319-3250 [1] SENSOR-SPEED (TIMING)  
23. 502-9478 C [1] NUT  
24. 324-3400 [1] LEVER-CONTROL  
25. 330-9189 [1] PLUG  
26. 334-0732 [1] ARM (FRONT HOUSING)  
27. 335-5578 [1] BRACKET  
28. 369-4486 M [2] BOLT (M6X1X35-MM)  
29. 390-3729 [1] LEVER-CONTROL  
30. 390-3731 [1] SHAFT  
31. 503-9707 C [1] CAP  
32. 336-2965 [1] SPRING  
33. 502-5421 C [1] PIN  
34. 503-9731 C [1] SHROUD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP52810214
 

396-6915: CONTROL GP-GOVERNOR

396-6915 CONTROL GP-GOVERNOR
PART OF 435-1655 ENGINE AR-PRIMARY
Type 1
i05141360 SEBP5281
3966915 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C1.5 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8916 M [4] BOLT (M6X16-MM)  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [2] WASHER  
6. 153-7983 [1] PIN  
7. 153-7987 [1] WASHER  
8. 095-1574 [1] SEAL-O-RING  
9. 162-2207 M [1] NUT  
10. 423-7724 [1] GASKET  
11. 308-1882 [1] SPRING  
12. 308-1892 M [1] NUT (M6X1-THD)  
13. 308-1897 [1] RING  
15. 308-4266 [1] SHAFT  
16. 309-6729 [1] SEAL-O-RING  
17. 311-0655 [1] SPRING  
18. 313-2037 [1] PLUG  
19. 321-4249 [1] NUT  
20. 495-0737 [1] BOLT  
21. 324-3400 [1] LEVER-CONTROL  
22. 330-9189 [1] PLUG  
23. 334-0732 [1] ARM (FRONT HOUSING)  
24. 335-5578 [1] BRACKET  
25. 342-9620 [1] SPRING  
26. 369-4486 M [2] BOLT (M6X1X35-MM)  
27. 390-3729 [1] LEVER-CONTROL  
28. 390-3731 [1] SHAFT  
29. 425-7065 [1] CAP-TAMPER PROOF  
30. 336-2965 [1] SPRING  
31. 313-2025 M [1] BOLT-SPECIAL (M10X1.25-MM THD)  
  M   METRIC PART
 

#SEBP52810215
 

396-6915: CONTROL GP-GOVERNOR

396-6915 CONTROL GP-GOVERNOR
PART OF 435-1655 ENGINE AR-PRIMARY
Type 2
i07160705 SEBP5281
3966915 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C1.5 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8916 M [4] BOLT (M6X16-MM)  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [2] WASHER  
6. 153-7983 [1] PIN  
7. 153-7987 [1] WASHER  
8. 095-1574 [1] SEAL-O-RING  
9. 162-2207 M [1] NUT  
10. 423-7724 [1] GASKET  
11. 308-1882 [1] SPRING  
12. 308-1892 M [1] NUT (M6X1-THD)  
13. 308-1897 [1] RING  
15. 308-4266 [1] SHAFT  
16. 309-6729 [1] SEAL-O-RING  
17. 311-0655 [1] SPRING  
18. 313-2037 [1] PLUG  
19. 502-9478 C [1] NUT  
20. 495-0737 [1] BOLT  
21. 324-3400 [1] LEVER-CONTROL  
22. 330-9189 [1] PLUG  
23. 334-0732 [1] ARM (FRONT HOUSING)  
24. 335-5578 [1] BRACKET  
25. 342-9620 [1] SPRING  
26. 369-4486 M [2] BOLT (M6X1X35-MM)  
27. 390-3729 [1] LEVER-CONTROL  
28. 390-3731 [1] SHAFT  
29. 503-9707 C [1] CAP  
30. 336-2965 [1] SPRING  
31. 313-2025 M [1] BOLT-SPECIAL (M10X1.25-MM THD)  
32. 502-5421 C [1] PIN  
33. 503-9731 C [1] SHROUD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP52810216
 

325-5671: FILTER GP-FUEL

325-5671 FILTER GP-FUEL
i02962248 SEBP5281
3255671 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your C1.5 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-8080 [1] FILTER GP-FUEL  
1A. 150-4142 [1] FILTER-FUEL  
1B. [1] PLUG  
1C. [5] WASHER  
1D. [2] BOLT  
2. 155-8082 [2] CONNECTOR  
 

#SEBP52810217
 

311-5814: GOVERNOR GP

311-5814 GOVERNOR GP
PART OF 435-1631 ENGINE AR
Type 1
i05340400 SEBP5281
3115814 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your C1.5 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 139-5511 [1] CAP (TAMPER RESISTANT)  
3. 153-5592 M [1] NUT (M8X1.25-THD)  
4. 153-6415 [2] WASHER  
5. 153-7983 [1] PIN  
6. 095-1574 [1] SEAL-O-RING  
7. 369-4486 M [2] BOLT (M6X1X35-MM)  
8. 162-2207 M [1] NUT  
9. 183-3572 [4] BOLT  
10. 217-7115 [1] CAP (TAMPER RESISTANT)  
11. 335-5578 [1] BRACKET  
12. 423-7724 [1] GASKET  
13. 334-0732 [1] ARM (FRONT HOUSING)  
14. 308-1882 [1] SPRING  
15. 390-3729 [1] LEVER-CONTROL  
16. 308-1892 M [1] NUT (M6X1-THD)  
17. 313-5832 [1] BOLT AS  
17A. 153-7987 [1] WASHER  
17B. 191-9297 M [1] NUT (M10X1.25-THD)  
17C. 313-5833 [1] SPRING  
18. 308-1897 [2] RING  
19. 425-7065 [1] CAP-TAMPER PROOF  
20. 321-4249 [1] NUT  
21. 308-1889 M [1] NUT (M10X1.25-THD)  
22. 311-9622 [1] SPRING  
23. 308-4266 [1] SHAFT  
24. 390-3731 [1] SHAFT  
25. 309-6729 [1] SEAL-O-RING  
26. 309-6732 [1] BOLT  
27. 311-0655 [1] SPRING  
28. 324-3399 [1] LEVER-CONTROL  
29. 336-2965 [1] SPRING  
30. 330-9189 [1] PLUG  
31. 354-7429 [1] SENSOR-SPEED (TIMING)  
  M   METRIC PART
 

#SEBP52810218
 

311-5814: GOVERNOR GP

311-5814 GOVERNOR GP
PART OF 435-1631 ENGINE AR
Type 2
i07157262 SEBP5281
3115814 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your C1.5 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 139-5511 [1] CAP (TAMPER RESISTANT)  
3. 153-5592 M [1] NUT (M8X1.25-THD)  
4. 153-6415 [2] WASHER  
5. 153-7983 [1] PIN  
6. 095-1574 [1] SEAL-O-RING  
7. 369-4486 M [2] BOLT (M6X1X35-MM)  
8. 162-2207 M [1] NUT  
9. 183-3572 [4] BOLT  
10. 217-7115 [1] CAP (TAMPER RESISTANT)  
11. 335-5578 [1] BRACKET  
12. 423-7724 [1] GASKET  
13. 334-0732 [1] ARM (FRONT HOUSING)  
14. 308-1882 [1] SPRING  
15. 390-3729 [1] LEVER-CONTROL  
16. 308-1892 M [1] NUT (M6X1-THD)  
17. 313-5832 [1] BOLT AS  
17A. 153-7987 [1] WASHER  
17B. 191-9297 M [1] NUT (M10X1.25-THD)  
17C. 313-5833 [1] SPRING  
18. 308-1897 C [1] RING  
19. 503-9707 C [1] CAP  
20. 502-9478 C [1] NUT  
21. 308-1889 M [1] NUT (M10X1.25-THD)  
22. 311-9622 [1] SPRING  
23. 308-4266 [1] SHAFT  
24. 390-3731 [1] SHAFT  
25. 309-6729 [1] SEAL-O-RING  
26. 495-0737 [1] BOLT  
27. 311-0655 [1] SPRING  
28. 324-3399 [1] LEVER-CONTROL  
29. 336-2965 [1] SPRING  
30. 330-9189 [1] PLUG  
31. 354-7429 [1] SENSOR-SPEED (TIMING)  
32. 503-9731 C [1] SHROUD  
33. 502-5421 C [1] PIN  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP52810219
 

322-0562: GOVERNOR GP

322-0562 GOVERNOR GP
PART OF 435-1654 CYLINDER BLOCK GP-LONG
Type 1
i02899349 SEBP5281
3220562 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your C1.5 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 139-5511 [1] CAP (TAMPER RESISTANT)  
3. 153-5592 M [1] NUT (M8X1.25-THD)  
4. 153-6415 [2] WASHER  
5. 153-7983 [1] PIN  
6. 095-1574 [1] SEAL-O-RING  
7. 154-2715 [1] WASHER  
8. 369-4486 M [2] BOLT (M6X1X35-MM)  
9. 162-2207 M [1] NUT  
10. 106-8916 M [4] BOLT (M6X16-MM)  
11. 217-7115 [1] CAP (TAMPER RESISTANT)  
12. 335-5578 [1] BRACKET  
13. 423-7724 [1] GASKET  
14. 334-0732 [1] ARM (FRONT HOUSING)  
15. 308-1882 [1] SPRING  
16. 308-1889 M [1] NUT (M10X1.25-THD)  
17. 308-1892 M [1] NUT (M6X1-THD)  
18. 308-1897 [2] RING  
19. 425-7065 [2] CAP-TAMPER PROOF  
20. 321-4249 [1] NUT  
21. 330-9189 [1] PLUG  
22. 308-4266 [1] SHAFT  
23. 390-3731 [1] SHAFT  
24. 495-0737 [1] BOLT  
25. 319-3250 [1] SENSOR-SPEED (ENGINE TIMING)  
26. 324-3400 [1] LEVER-CONTROL  
27. 390-3729 [1] LEVER-CONTROL  
28. 315-5236 [1] BOLT AS  
28A. 153-7987 [1] WASHER  
28B. 191-9297 M [1] NUT (M10X1.25-THD)  
28C. 315-5235 [1] SPRING  
29. 317-7195 [1] SPRING  
30. 308-1875 [1] SEAL-O-RING  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog C1.5 :

CONTROL GP-GOVERNOR
364-2720 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
364-2720 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
364-2717 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
331-4506 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
331-4506 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
330-3011 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
330-3011 CONTROL GP-GOVERNOR
TURBOCHARGER GP
396-6918 TURBOCHARGER GP
CONTROL GP-GOVERNOR
364-2742 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
370-7836 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
370-7836 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
396-6915 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
396-6915 CONTROL GP-GOVERNOR
FILTER GP-FUEL
325-5671 FILTER GP-FUEL
GOVERNOR GP
311-5814 GOVERNOR GP
GOVERNOR GP
311-5814 GOVERNOR GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.