ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP54070820
350-9924: WIRING GP-ENGINE
For full view, you need register
Parts for your 3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 | [5] | STRAP-CABLE | |
| 2. | [1] | HARNESS AS-ENGINE (INTERFACE) | ||
| 6I-4348 | [2] | BOOT (40-PIN) | ||
| 8T-8729 | [23] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [22] | PLUG-SEAL | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-1339 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 8T-8730 | [21] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.4-M) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 124-0284 E | TUBE-HEAT SHRINK (3.2-MM DIA)(40-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 3. | 4P-8134 | [3] | CLIP (LADDER) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP54070821
415-1145: WIRING GP-ENGINE
415-1145 WIRING GP-ENGINE
S/N 1KZ1-UP
PART OF 440-1647 ENGINE AR, 437-8263 ENGINE AR-COMPLETE
Type 1
FOR USE WITH 12 CYLINDER ENGINE
ALSO AN ATTACHMENT
S/N 1KZ1-UP
PART OF 440-1647 ENGINE AR, 437-8263 ENGINE AR-COMPLETE
Type 1
FOR USE WITH 12 CYLINDER ENGINE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-4594 | [2] | SPACER (0.406X0.875X0.75-IN THK) | |
| 2. | 102-2240 Y | [1] | SENSOR GP-TEMPERATURE (ENGINE OIL) | |
| 2A. | 102-2240 Y | [1] | SENSOR GP-TEMPERATURE (ENGINE COOLANT) | |
| 3. | 228-7100 | [1] | SEAL-O-RING | |
| 4. | 318-1181 Y | [2] | SENSOR GP-SPEED (MAGNETIC)(ENGINE) | |
| 5. | 320-3060 | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 6. | 353-5441 | [1] | ADAPTER-ELBOW | |
| 7. | 0L-1143 | [4] | BOLT (3/8-16X2.5-IN) | |
| 8. | 0S-0509 | [16] | BOLT (3/8-16X0.75-IN) | |
| 9. | 0S-1590 | [2] | BOLT (3/8-16X2-IN) | |
| 10. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 11. | 112-0034 | [2] | SEAL-O-RING | |
| 12. | 1V-7753 | [4] | SPACER (0.546X0.841X1.75-IN THK) | |
| 13. | 214-7566 | [1] | SEAL-O-RING | |
| 14. | 112-3231 | [2] | ADAPTER (1/2-14-THD) | |
| 15. | 415-1144 Y | [1] | HARNESS GP-WIRING (ENGINE) | |
| 16. | 4P-7429 | [2] | CLIP (LADDER) | |
| 17. | 4P-7581 | [7] | CLIP (LADDER) | |
| 18. | 4P-8134 | [28] | CLIP (LADDER) | |
| 19. | 5M-2894 | [23] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 6W-6672 | [4] | SPACER (10.5X20X38-MM THK) | |
| 23. | 7K-1181 | [45] | STRAP-CABLE | |
| 24. | 9X-8874 | [4] | BOLT (1/2-13X3-IN) | |
| 25. | 8C-6427 | [1] | ADAPTER | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54070822
415-1145: WIRING GP-ENGINE
415-1145 WIRING GP-ENGINE
S/N 1KZ1-UP
PART OF 440-1647 ENGINE AR, 437-8263 ENGINE AR-COMPLETE
Type 2
FOR USE WITH 12 CYLINDER ENGINE
ALSO AN ATTACHMENT
S/N 1KZ1-UP
PART OF 440-1647 ENGINE AR, 437-8263 ENGINE AR-COMPLETE
Type 2
FOR USE WITH 12 CYLINDER ENGINE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 | [50] | STRAP-CABLE | |
| 2. | 102-2240 Y | [1] | SENSOR GP-TEMPERATURE (ENGINE OIL) | |
| 2A. | 102-2240 Y | [1] | SENSOR GP-TEMPERATURE (ENGINE COOLANT) | |
| 3. | 112-3231 | [2] | ADAPTER (1/2-14-THD) | |
| 4. | 228-7100 | [1] | SEAL-O-RING | |
| 5. | 318-1181 Y | [2] | SENSOR GP-SPEED (MAGNETIC)(ENGINE) | |
| 6. | 320-3060 | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 7. | 353-5441 | [1] | ADAPTER-ELBOW | |
| 8. | 465-3345 CY | [1] | WIRING GP-ENGINE | |
| 9. | 0L-1143 | [4] | BOLT (3/8-16X2.5-IN) | |
| 10. | 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | |
| 11. | 0S-0509 | [17] | BOLT (3/8-16X0.75-IN) | |
| 12. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 13. | 1V-7753 | [4] | SPACER (0.546X0.841X1.75-IN THK) | |
| 14. | 214-7566 | [1] | SEAL-O-RING | |
| 15. | 310-1898 | [1] | CLIP (LADDER) | |
| 16. | 3K-0360 | [2] | SEAL-O-RING | |
| 17. | 4P-7429 | [2] | CLIP (LADDER) | |
| 18. | 4P-7581 | [5] | CLIP (LADDER) | |
| 19. | 4P-7582 | [1] | CLIP | |
| 20. | 4P-8134 | [27] | CLIP (LADDER) | |
| 21. | 5M-2894 | [25] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 22. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 6W-6672 | [6] | SPACER (10.5X20X38-MM THK) | |
| 24. | 7K-1181 | [7] | STRAP-CABLE | |
| 25. | 8C-6427 | [1] | ADAPTER | |
| 26. | 0L-1329 | [4] | BOLT (1/2-13X3-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54070823
416-4558: WIRING GP-ENGINE
416-4558 WIRING GP-ENGINE -INTERCONNECT
S/N YAX1-UP
FOR USE WITH EMCP 4.3/4.4
AN ATTACHMENT
S/N YAX1-UP
FOR USE WITH EMCP 4.3/4.4
AN ATTACHMENT
For full view, you need register
Parts for your 3512 GENERATOR SET:
CATERPILLAR SIS#SEBP54070824
465-3345: WIRING GP-ENGINE
465-3345 WIRING GP-ENGINE
S/N 1KZ1-UP
PART OF 415-1145 WIRING GP-ENGINE
ALSO AN ATTACHMENT
S/N 1KZ1-UP
PART OF 415-1145 WIRING GP-ENGINE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 147-3348 Y | [1] | ENCLOSURE GP-WIRING | ||
| 465-3339 Y | [1] | HARNESS AS-WIRING | ||
| 147-3360 | [1] | HARNESS AS-MOTOR (STARTING) | ||
| 8T-8827 | [2] | BOOT (RED) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 2L-8052 | [1] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [1] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 3T-4692 | [1] | TERMINAL-RING (6-GA, 7/16-IN SCREW) | ||
| -OR- | ||||
| 3T-4693 | [1] | TERMINAL-RING (8-GA, 7/16-IN SCREW) | ||
| 2L-8054 | [2] | TERMINAL-RING (6-GA, 1/2-IN SCREW) | ||
| -OR- | ||||
| 2L-8061 | [2] | TERMINAL-RING (8-GA, 1/2-IN SCREW) | ||
| 8L-8413 B | [6] | STRAP-CABLE (WHITE) | ||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54070825
473-8722: WIRING GP-ENGINE
For full view, you need register
Parts for your 3512 GENERATOR SET:
CATERPILLAR SIS#SEBP54070826
278-4895: WIRING GP-GENERATOR
278-4895 WIRING GP-GENERATOR -CURRENT TRANSFORMER
S/N YAX1-UP
Type 1
FOR USE WITH LOW VOLTAGE
AN ATTACHMENT
S/N YAX1-UP
Type 1
FOR USE WITH LOW VOLTAGE
AN ATTACHMENT
For full view, you need register
Parts for your 3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 | [2] | STRAP-CABLE | |
| 2. | 293-9452 | [2] | MOUNTING-CABLE TIE | |
| 3. | 278-4896 | [1] | HARNESS AS-WIRING (CURRENT TRANSFORMER) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7K-1181 | [16] | STRAP-CABLE | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP54070827
278-4895: WIRING GP-GENERATOR
278-4895 WIRING GP-GENERATOR -CURRENT TRANSFORMER
S/N YAX1-UP
Type 2
FOR USE WITH LOW VOLTAGE
AN ATTACHMENT
S/N YAX1-UP
Type 2
FOR USE WITH LOW VOLTAGE
AN ATTACHMENT
For full view, you need register
Parts for your 3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 | [3] | STRAP-CABLE | |
| 2. | 293-9452 | [2] | MOUNTING-CABLE TIE | |
| 3. | 390-2752 CY | [1] | HARNESS AS-WIRING | |
| 4. | 8T-4244 CM | [1] | NUT (M12X1.75-THD) | |
| 5. | 8T-4223 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 8T-4139 CM | [1] | BOLT (M12X1.75X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54070828
278-4897: WIRING GP-GENERATOR
278-4897 WIRING GP-GENERATOR -VOLTAGE SENSING
S/N YAX1-UP
FOR USE WITH LOW VOLTAGE
AN ATTACHMENT
S/N YAX1-UP
FOR USE WITH LOW VOLTAGE
AN ATTACHMENT
For full view, you need register
Parts for your 3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 244-9599 | [1] | HARNESS AS-WIRING (EMCP 3) | |
| 102-8805 | [2] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH INCLUDES RECEPTACLE ASSEMBLY & WEDGE) | ||||
| 7K-1181 | [8] | STRAP-CABLE | ||
| 186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 109-3038 | [4] | END-WIRE (16-GA) | ||
| 2. | 278-4898 | [1] | HARNESS AS-WIRING (VOLTAGE SENSING) | |
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 7K-1181 | [8] | STRAP-CABLE | ||
| 109-3038 | [4] | END-WIRE (16-GA) | ||
| 3. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 4. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 5. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| M | METRIC PART | |||
#SEBP54070829
278-4899: WIRING GP-GENERATOR
278-4899 WIRING GP-GENERATOR -VOLTAGE REGULATOR
S/N YAX1-UP
FOR USE WITH LOW VOLTAGE
AN ATTACHMENT
S/N YAX1-UP
FOR USE WITH LOW VOLTAGE
AN ATTACHMENT
For full view, you need register
Parts for your 3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 244-9612 | [1] | HARNESS AS-WIRING (PERMANENT MAGNET) | |
| 109-3038 | [1] | END-WIRE (16-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 234-1856 | [1] | PLUG-CONNECTOR (6-PIN) | ||
| 244-0452 | [6] | END-WIRE (14-GA TO 20-GA) | ||
| 246-7013 | [1] | SEAL (6-POSITION) | ||
| 2. | 278-4901 | [1] | HARNESS AS-WIRING (VOLTAGE SENSING) | |
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2L-8081 | [3] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 7K-1181 | [4] | STRAP-CABLE | ||
| 3. | 278-4902 | [1] | HARNESS AS-WIRING (CURRENT TRANSFORMER) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7K-1181 | [4] | STRAP-CABLE | ||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Operation and Maintenance Manual
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Testing and Adjusting
Service Magazine
Caterpillar Parts SIS Catalog 3512 :
Truck sale:
230,416
230,416
238,453
178,974
178,974