AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

271-9248 MANIFOLD GP-VALVE -INLET S/N JAD1-UP PART OF 256-3643, 261-3682, 261-3683, 261-4171 VALVE GP-MAIN CONTROL 950H


HYDRAULIC SYSTEM
MANIFOLD GP
TANK GP
PUMP GP

WHEEL LOADER 950H WHEEL LOADER JAD
 950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine SEBP5422 950H JAD   (2009)

HYDRAULIC SYSTEM

MANIFOLD GP
MANIFOLD GP-CONTROL
242-1307 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
352-1587 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
366-9955 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
366-9955 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
458-2253 MANIFOLD GP-CONTROL
MANIFOLD GP-VALVE
269-9398 MANIFOLD GP-VALVE
MANIFOLD GP-VALVE
269-9398 MANIFOLD GP-VALVE
MANIFOLD GP-VALVE
271-9248 MANIFOLD GP-VALVE
 

#SEBP54220680
 

271-9248: MANIFOLD GP-VALVE

271-9248 MANIFOLD GP-VALVE -INLET
S/N JAD1-UP
PART OF 256-3643, 261-3682, 261-3683, 261-4171 VALVE GP-MAIN CONTROL
i03570034 SEBP5422
2719248 MANIFOLD GP-VALVE Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1T-0936 [1] PLUG-ORIFICE  
3. 6E-5066 [1] SCREEN (HYDRAULIC)  
4. 193-1665 Y [1] VALVE GP-PRESSURE REDUCING (SIGNAL DUPLICATION)  
5. 247-8632 [1] VALVE GP-RELIEF (LOAD SENSING SIGNAL)  
  225-9611 KIT-SEAL (RELIEF VALVE)  
    (INCLUDES SEAL-0-RINGS & RING-BACKUPS)
8. 148-8395 [1] PLUG AS  
8A. 3K-0360 [1] SEAL-O-RING  
8B. 9S-8005 [1] PLUG (3/4-16-THD)  
9. 162-0177 [1] PLUG AS  
9A. 3J-1907 [1] SEAL-O-RING  
9B. 9S-8004 [1] PLUG (9/16-18-THD)  
10. 173-3993 [6] PLUG AS  
    (EACH INCLUDES)
10A. 4J-7533 [1] SEAL-O-RING  
10B. 9S-8001 [1] PLUG  
  Y   SEPARATE ILLUSTRATION
 

#SEBP54220681
 

237-0960: MOUNTING GP-HYDRAULIC TANK

237-0960 MOUNTING GP-HYDRAULIC TANK
S/N JAD1-UP
PART OF 237-0238, 393-6422 HYDRAULIC AR-2 VALVE
i03558000 SEBP5422
2370960 MOUNTING GP-HYDRAULIC TANK Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-6080 [8] MOUNT-RUBBER  
2. 392-8762 [1] BRACKET AS (LH)  
3. 392-8761 [1] BRACKET AS (RH)  
4. 8T-4123 [4] WASHER (22X35X3.5-MM THK)  
5. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
6. 8T-6381 M [4] BOLT (M20X2.5X120-MM)  
7. 8T-7971 [8] WASHER-HARD (13.5X25.5X5-MM THK)  
8. 8X-0674 [4] WASHER (22X100X10-MM THK)  
  M   METRIC PART
 

#SEBP54220682
 

385-8575: PUMP & MOUNTING GP-AIR

385-8575 PUMP & MOUNTING GP-AIR -VARIABLE PITCH FAN
S/N JAD1-UP
24-VOLT
PART OF 390-0035 LINES GP-HYDRAULIC FAN
Type 1
i04778571 SEBP5422
3858575 PUMP & MOUNTING GP-AIR Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-9658 [3] SPACER (8.2X12.7X25.4-MM THK)  
3. 9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
4. 155-0576 [6] MOUNT-ISOLATION  
5. 321-8167 [1] BRACKET AS  
  6V-8224 M [1] NUT-WELD (M10X1.5-THD)  
6. 321-8168 [1] BRACKET AS  
7. 321-8191 [1] PUMP AS-AIR (VARIABLE PITCH FAN)  
  M   METRIC PART
 

#SEBP54220683
 

385-8575: PUMP & MOUNTING GP-AIR

385-8575 PUMP & MOUNTING GP-AIR -VARIABLE PITCH FAN
S/N JAD1-UP
24-VOLT
PART OF 390-0035 LINES GP-HYDRAULIC FAN
Type 2
i05246753 SEBP5422
3858575 PUMP & MOUNTING GP-AIR Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-9658 [3] SPACER (8.2X12.7X25.4-MM THK)  
3. 9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
4. 155-0576 [6] MOUNT-ISOLATION  
5. 374-1603 C [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 394-1108 C [1] BRACKET AS  
7. 368-4198 C [1] PUMP AS-AIR (VARIABLE PITCH FAN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP54220684
 

237-0954: PUMP & MTG GP-BRAKE & HYD FAN

237-0954 PUMP & MTG GP-BRAKE & HYD FAN
S/N JAD1-UP
PART OF 237-0238, 393-6422 HYDRAULIC AR-2 VALVE
i03558320 SEBP5422
2370954 PUMP & MTG GP-BRAKE & HYD FAN Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-8088 [2] SPACER (11.66X15.88X18-MM THK)  
2. 191-3678 [1] GEAR (50-TEETH)  
3. 243-3696 [1] PLATE  
4. 245-7456 [1] ADAPTER  
5. 254-5146 Y [1] PUMP GP-PISTON (BRAKE, HYDRAULIC FAN)  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
7. 3D-0053 [1] BALL BEARING  
8. 6V-8467 [1] SEAL-O-RING  
9. 8T-2561 [1] WASHER-HARD (10.5X28.5X5-MM THK)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
12. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
13. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
14. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
16. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
17. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
18. 135-9819 [1] SEAL-INTEGRAL  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP54220685
 

246-2054: PUMP & MTG GP-HYDRAULIC

246-2054 PUMP & MTG GP-HYDRAULIC
S/N JAD1-UP
PART OF 237-0238, 393-6422 HYDRAULIC AR-2 VALVE
i03558963 SEBP5422
2462054 PUMP & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 241-9299 Y [1] PUMP GP-PISTON (STEERING)  
2. 246-2099 [1] BRACKET AS  
3. 246-2887 [1] COUPLING AS  
  246-2886 [1] COUPLING  
  8C-3312 [1] RING-RETAINING  
4. 292-8767 CY [1] PUMP GP-PISTON (IMPLEMENT, PILOT)  
5. 222-5792 [1] SEAL-O-RING  
6. 226-4192 [4] WASHER-HARD (21.5X35X8-MM THK)  
7. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
8. 7D-9014 [1] SEAL-O-RING  
9. 7X-2563 M [4] BOLT (M20X2.5X60-MM)  
10. 7X-7729 [2] WASHER (11X25X3-MM THK)  
11. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
12. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
13. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4244 M [2] NUT (M12X1.75-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP54220686
 

311-3170: PUMP GP-AIR

311-3170 PUMP GP-AIR -VARIABLE PITCH FAN
S/N JAD1-UP
PART OF 311-0065 LINES GP-HYDRAULIC FAN
i04257889 SEBP5422
3113170 PUMP GP-AIR Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 8T-9658 [3] SPACER (8.2X12.7X25.4-MM THK)  
3. 155-0576 [6] MOUNT-ISOLATION  
4. 374-1603 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
5. 394-1108 [1] BRACKET AS  
6. 368-4198 [1] PUMP AS-AIR (VARIABLE PITCH FAN)  
7. 130-5300 [2] CLIP  
8. 102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
9. 0A-2926 [1] FITTING  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
12. 9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
13. 331-3257 [1] VALVE AS  
  M   METRIC PART
 

#SEBP54220687
 

241-9299: PUMP GP-PISTON

241-9299 PUMP GP-PISTON
S/N JAD1-UP
PART OF 246-2054 PUMP & MTG GP-HYDRAULIC
i03558967 SEBP5422
2419299 PUMP GP-PISTON Parts scheme 2419299 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6594 [1] BEARING-SWASH  
2. 6E-4224 [1] PLUG-SWASHPLATE  
3. 033-6036 [1] SEAL-O-RING  
4. 100-8252 [1] HEAD-PUMP  
5. 9T-1699 [1] SPRING  
6. 9T-1710 [1] POPPET  
7. 9T-1636 [1] SEAT  
8. 6E-6596 [1] COVER-TRUNNION  
9. 6V-3834 [1] SEAL-O-RING  
10. 3E-4302 M [2] SCREW-FLAT HEAD (M4X0.7X10-MM)  
11. 6V-8214 M [3] BOLT (M6X1X20-MM)  
12. 6E-6597 [1] BEARING-SWASH  
13. 6V-8004 M [2] BOLT (M12X1.75X120-MM)  
14. 8T-0372 M [2] BOLT (M12X1.75X90-MM)  
15. 260-0411 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
16. 8T-5039 [3] SEAL-O-RING  
17. 6V-8337 M [4] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
18. 4H-1440 [2] PIN-SPRING  
19. [1] SHAFT-PUMP  
20. 100-8203 [1] HOUSING-PUMP  
21. 006-8663 [1] RING  
22. 8T-4750 [1] SEAL-LIP TYPE  
23. 6E-6599 [1] KIT-BIAS PISTON  
    (INCLUDES SPRING, ROD, PISTON & SEAL)
24. 6E-6600 [1] SPRING-BIAS  
25. 6E-6571 Y [1] ROTATING GP-PUMP  
26. 6E-6601 [1] GASKET  
27. 7L-9061 [2] SEAL-O-RING  
28. 3E-7417 [2] PLUG  
29. 8T-7876 [2] SEAL-O-RING  
30. 9T-1633 [1] PLATE  
31. 9T-2197 B [1] SHIM PACK (INCLUDES 17-SHIMS)  
32. 1P-6872 [1] CUP-BEARING  
33. 004-9040 [1] CONE-BEARING  
34. 9T-1652 [1] PIN  
35. 6E-6602 [1] KIT-PISTON CONTROL  
    (INCLUDES PISTON, ROD, & SEAL)
36. 167-1802 [1] SWASHPLATE GP  
  1H-3937 [2] PIN  
  167-1801 [2] STOP  
37. 7T-8273 [1] CUP-BEARING  
38. 7T-8272 [1] CONE-BEARING  
39. 3K-0360 [1] SEAL-O-RING  
40. 9S-4185 [1] PLUG (3/4-16-THD)  
41. 259-7060 [2] STUD  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54220688
 

254-5146: PUMP GP-PISTON

254-5146 PUMP GP-PISTON
S/N JAD1-UP
PART OF 237-0954 PUMP & MTG GP-BRAKE & HYD FAN
i03558326 SEBP5422
2545146 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-5504 Y [1] ROTATING GP-PUMP (BRAKE, HYDRAULIC FAN)  
2. 168-7861 [1] PISTON-ACTUATOR  
3. 259-5507 [1] ROD-PISTON  
4. 259-5509 [1] SWASHPLATE  
5. 233-6306 [1] SHAFT-DRIVE  
6. 198-5351 [1] PLUG  
7. 194-9472 [1] SPRING  
8. 191-7582 B [1] SHIM (2.5-MM THK)  
9. 194-9473 [1] RING  
10. 155-9125 [1] BEARING AS-ROLLER  
11. 191-7583 [1] BEARING-TAPERED  
12. 194-9474 [2] BEARING-CRADLE  
13. 155-9127 [1] SEAL  
14. 133-6578 [1] SEAL-O-RING  
15. 8T-7525 [1] SEAL-O-RING  
16. 168-3504 [1] SEAL  
17. 8T-9597 [1] RING-RETAINING  
18. 8T-9515 M [4] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
19. 9S-8005 [1] PLUG (3/4-16-THD)  
20. 120-4394 [1] PLUG-BREAK OFF  
21. 099-3047 [1] DOWEL  
22. 3K-0360 [1] SEAL-O-RING  
23. 207-0697 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
24. 155-9133 [1] KEY  
25. 9S-8002 [1] PLUG (7/16-20-THD)  
26. 3J-7354 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54220689
 

292-8767: PUMP GP-PISTON

292-8767 PUMP GP-PISTON
S/N JAD1-UP
PART OF 246-2054 PUMP & MTG GP-HYDRAULIC
Type 1
i03559284 SEBP5422
2928767 PUMP GP-PISTON Parts scheme 2928767 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4215 [1] SPACER  
3. 096-4389 [9] SPRING  
4. 129-7853 [1] PLATE  
5. 129-7921 [1] RING-RETAINING  
6. 341-2862 [2] SEAL-LIP TYPE  
7. 129-7927 [1] BEARING  
8. 150-5782 [2] COVER  
9. 173-3427 [1] GUIDE-BALL  
10. 192-0573 [2] PIN-DOWEL  
11. 254-6555 [1] BLOCK  
12. 256-0083 [1] BARREL AS-PUMP  
13. 256-7485 [1] PISTON AS  
14. 263-7474 [1] SET-BEARING  
15. 272-5672 [1] SHAFT  
16. 292-3264 B [1] SEAL-O-RING  
17. 292-8769 [1] BODY AS-PUMP  
18. 292-8771 [1] CASE  
19. 298-8919 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
20. 067-3161 [1] RING-RETAINING  
21. 094-1875 [3] DOWEL  
22. 094-1883 [1] PLUG  
23. 095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
24. 095-0946 [1] RING-RETAINING  
25. 094-1882 [1] PLUG  
26. 129-7979 [2] DOWEL  
27. 189-9763 [1] SEAL-O-RING  
28. 193-1736 [2] SEAL-O-RING  
29. 236-6919 [1] SEAL-O-RING  
30. 242-6801 [1] SWASHPLATE AS  
  094-1875 [1] DOWEL  
  173-3428 [1] BUSHING  
  242-6803 [2] PIN-DOWEL  
31. 242-6804 [2] BEARING  
32. 3D-2824 [2] SEAL-O-RING  
33. 3J-1907 [1] SEAL-O-RING  
34. 3K-0360 [3] SEAL-O-RING  
36. 4I-1022 [1] ORIFICE  
37. 6V-3907 [1] SEAL-O-RING  
38. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
39. 8T-4140 M [4] BOLT (M16X2X60-MM)  
40. 9S-4183 [2] PLUG (1-1/16-12-THD)  
41. 9S-4185 [2] PLUG (3/4-16-THD)  
42. 9S-8004 [1] PLUG (9/16-18-THD)  
43. 9S-8005 [1] PLUG (3/4-16-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950H :

MANIFOLD GP-VALVE
269-9398 MANIFOLD GP-VALVE
MANIFOLD GP-VALVE
269-9398 MANIFOLD GP-VALVE
MANIFOLD GP-CONTROL
458-2253 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
366-9955 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
366-9955 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
352-1587 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
242-1307 MANIFOLD GP-CONTROL
LINES GP-TILT CYLINDER
244-5588 LINES GP-TILT CYLINDER
MOUNTING GP-HYDRAULIC TANK
237-0960 MOUNTING GP-HYDRAULIC TANK
PUMP & MOUNTING GP-AIR
385-8575 PUMP & MOUNTING GP-AIR
PUMP & MOUNTING GP-AIR
385-8575 PUMP & MOUNTING GP-AIR
PUMP & MTG GP-BRAKE & HYD FAN
237-0954 PUMP & MTG GP-BRAKE & HYD FAN
PUMP & MTG GP-HYDRAULIC
246-2054 PUMP & MTG GP-HYDRAULIC
PUMP GP-AIR
311-3170 PUMP GP-AIR
PUMP GP-PISTON
241-9299 PUMP GP-PISTON
PUMP GP-PISTON
254-5146 PUMP GP-PISTON

Truck sale:

Caterpillar 950H
 
Caterpillar 950H
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 950H, Wheel Loaders, Construction
70,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
 
50,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.
Caterpillar 950H, Wheel Loaders, Construction
99,500 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
HOLT CAT
 
60,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.