FRAME AND BODY
HITCH GPHOOD GP
LADDER GP
LINES GP
FRAME AND BODY
HITCH GP
#SEBP54230500
112-6953: HITCH GP-ARTICULATING
112-6953 HITCH GP-ARTICULATING
S/N MAL1-UP
PART OF 237-4933, 368-8479 CHASSIS AR
S/N MAL1-UP
PART OF 237-4933, 368-8479 CHASSIS AR
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-3925 | [2] | CUP-BEARING | |
| 2. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 3F-5950 | [2] | CONE-BEARING | |
| 4. | 3K-2876 | [2] | SEAL-LIP TYPE | |
| 5. | 5K-0983 | [2] | SEAL-LIP TYPE | |
| 6. | 7D-8348 | [2] | CUP-BEARING | |
| 7. | 7D-8349 | [2] | CONE-BEARING | |
| 8. | 7G-8839 | [1] | SPACER (13.5X57X6-MM THK) | |
| 9. | 7V-8632 | [1] | SPACER | |
| 10. | 7V-8633 | [1] | SPACER | |
| 11. | 118-8267 | [1] | PIN AS | |
| 12. | 118-8269 | [2] | BEARING | |
| 13. | 118-8270 | [1] | CAP | |
| 14. | 118-8271 | [1] | PIN | |
| 15. | 118-8272 | [1] | CAP | |
| 16. | 118-8273 | [1] | CAP | |
| 17. | 118-8275 B | [1] | SHIM PACK (INCLUDES 18-SHIMS) | |
| 18. | 118-8276 B | [1] | SHIM PACK (INCLUDES 20-SHIMS) | |
| 19. | 127-6513 | [1] | CAP | |
| 20. | 127-6514 B | [1] | SHIM PACK (INCLUDES 20-SHIMS) | |
| 21. | 134-3079 | [1] | PLATE | |
| 22. | 7X-2550 M | [7] | BOLT (M12X1.75X110-MM) | |
| 23. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 24. | 8T-4176 M | [6] | BOLT (M12X1.75X90-MM) | |
| 25. | 8T-4183 M | [6] | BOLT (M12X1.75X40-MM) | |
| 26. | 8T-4223 | [19] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 106-4175 M | [2] | BOLT (M20X2.5X60-MM) | |
| 28. | 8T-4123 | [2] | WASHER (22X35X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP54230501
292-6000: HOOD & GUARD GP
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125-7037 | [1] | INSERT | |
| 2. | 371-0966 | [1] | PIPE AS | |
| 3. | 239-8410 | [1] | PLATE | |
| 4. | 243-1712 | [2] | BRACKET | |
| 5. | 243-1722 | [1] | BRACKET (RH) | |
| 6. | 243-1723 | [1] | BRACKET (LH) | |
| 7. | 248-0706 | [2] | ROD AS | |
| 8. | 251-1701 Y | [1] | PANEL GP-HOOD (TOP) | |
| 9. | 251-1705 Y | [1] | PANEL GP-HOOD (SIDE, RH) | |
| 10. | 251-1708 Y | [1] | PANEL GP-HOOD (SIDE, LH) | |
| 12. | 251-4755 | [1] | BRACKET AS (RH) | |
| 13. | 251-4756 | [1] | BRACKET AS (LH) | |
| 14. | 351-9911 Y | [1] | SUPPORT GP-HOOD | |
| 15. | 287-7893 | [1] | ANGLE | |
| 16. | 292-5999 | [1] | GRILL AS-TOP (HOOD) | |
| 17. | 292-6001 Y | [1] | DOOR GP-ACCESS (HOOD, LH) | |
| 18. | 292-6002 Y | [1] | DOOR GP-ACCESS (HOOD, RH) | |
| 19. | 3B-4611 | [2] | PIN-COTTER | |
| 20. | 4M-7470 | [6] | GROMMET | |
| 21. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 22. | 7X-7729 | [40] | WASHER (11X25X3-MM THK) | |
| 23. | 8T-4121 | [38] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 8T-4133 M | [24] | NUT (M10X1.5-THD) | |
| 25. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 26. | 8T-4196 M | [54] | BOLT (M10X1.5X35-MM) | |
| 27. | 9M-5884 | [6] | BUMPER | |
| 28. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 29. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 30. | 308-9131 H | SEAL (960-MM) | ||
| 31. | 126-8472 E | SEAL (7.5-CM EACH) | ||
| 32. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 33. | 300-7318 E | SEAL (147-CM) | ||
| 34. | 120-5281 E | SEAL (88-CM EACH) | ||
| 36. | 5P-4115 | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| H | ORDER BY THE MILLIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54230502
237-0430: LADDER GP
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-8106 | [32] | SPACER (11.13X19.05X15-MM THK) | |
| 2. | 234-1530 | [4] | STEP AS | |
| 3. | 234-3545 | [16] | PLATE | |
| 4. | 234-5107 | [8] | SUPPORT-STEP (RUBBER) | |
| 5. | 234-5110 | [2] | PLATE | |
| 6. | 245-3834 | [1] | HANDRAIL AS (LH) | |
| 7. | 245-3835 | [1] | HANDRAIL AS (RH) | |
| 8. | 245-3852 | [1] | HANDRAIL AS (LH) | |
| 9. | 245-3853 | [1] | HANDRAIL AS (RH) | |
| 10. | 246-6727 | [4] | BRACKET AS | |
| 11. | 246-7934 | [1] | LADDER AS (LH) | |
| 12. | 246-7935 | [1] | LADDER AS (RH) | |
| 13. | 304-5182 | [1] | SUPPORT AS | |
| 14. | 5P-1076 | [10] | WASHER-HARD (13.5X30X4-MM THK) | |
| 15. | 8T-4121 | [56] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 17. | 8T-4139 M | [14] | BOLT (M12X1.75X30-MM) | |
| 18. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
| 19. | 8T-4186 M | [32] | BOLT (M10X1.5X40-MM) | |
| 20. | 8T-4195 M | [20] | BOLT (M10X1.5X30-MM) | |
| 21. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
#SEBP54230503
237-0430: LADDER GP
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-8106 | [32] | SPACER (11.13X19.05X15-MM THK) | |
| 2. | 234-1530 | [4] | STEP AS | |
| 3. | 234-3545 | [16] | PLATE | |
| 4. | 234-5107 | [8] | SUPPORT-STEP (RUBBER) | |
| 6. | 245-3834 | [1] | HANDRAIL AS (LH) | |
| 7. | 245-3835 | [1] | HANDRAIL AS (RH) | |
| 8. | 245-3852 | [1] | HANDRAIL AS (LH) | |
| 9. | 245-3853 | [1] | HANDRAIL AS (RH) | |
| 10. | 246-6727 | [4] | BRACKET AS | |
| 11. | 246-7934 | [1] | LADDER AS (LH) | |
| 12. | 246-7935 | [1] | LADDER AS (RH) | |
| 14. | 368-5091 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 15. | 344-1199 | [64] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 344-5675 M | [8] | NUT (M10X1.5-THD) | |
| 17. | 368-5078 | [9] | BOLT (M12X1.75X30-MM) | |
| 18. | 259-2627 M | [9] | BOLT (M12X1.75X40-MM) | |
| 19. | 368-5079 | [32] | BOLT (M10X1.5X40-MM) | |
| 20. | 368-5080 | [24] | BOLT (M10X1.5X30-MM) | |
| 21. | 279-6632 | [12] | WASHER (13.5X25.5X3-MM THK) | |
| 22. | 248-6818 | [2] | PLATE | |
| 23. | 248-6820 | [2] | PLATE | |
| M | METRIC PART | |||
#SEBP54230504
372-4849: LADDER GP
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-8106 | [8] | SPACER (11.13X19.05X15-MM THK) | |
| 2. | 234-3545 | [4] | PLATE | |
| 3. | 234-5110 | [2] | PLATE | |
| 4. | 372-4852 | [1] | HANDRAIL AS (LH) | |
| 5. | 372-4855 | [1] | HANDRAIL AS (RH) | |
| 6. | 372-4857 | [1] | HANDRAIL AS (LH) | |
| 7. | 372-4861 | [1] | HANDRAIL AS (RH) | |
| 8. | 372-4863 | [1] | LADDER AS (LH) | |
| 9. | 372-4866 | [1] | LADDER AS | |
| 10. | 376-6511 Y | [2] | STEP GP | |
| 11. | 376-6512 Y | [1] | STEP GP | |
| 12. | 380-5783 | [1] | SUPPORT AS | |
| 13. | 259-2627 M | [5] | BOLT (M12X1.75X40-MM) | |
| 14. | 279-6632 | [12] | WASHER (13.5X25.5X3-MM THK) | |
| 15. | 344-1199 | [32] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 368-5078 | [13] | BOLT (M12X1.75X30-MM) | |
| 17. | 368-5079 | [8] | BOLT (M10X1.5X40-MM) | |
| 18. | 368-5080 | [20] | BOLT (M10X1.5X30-MM) | |
| 19. | 368-5091 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 20. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54230505
372-4849: LADDER GP
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 397-9301 | [8] | WASHER-HARD (11.5X20X15-MM THK) | |
| 3. | 440-4805 | [2] | PLATE | |
| 4. | 372-4852 | [1] | HANDRAIL AS (LH) | |
| 5. | 372-4855 | [1] | HANDRAIL AS (RH) | |
| 6. | 432-8513 | [1] | GUARDRAIL AS (LH) | |
| 7. | 372-4861 | [1] | HANDRAIL AS (RH) | |
| 8. | 372-4863 | [1] | LADDER AS (LH) | |
| 9. | 372-4866 | [1] | LADDER AS | |
| 10. | 376-6511 Y | [2] | STEP GP | |
| 11. | 376-6512 Y | [1] | STEP GP | |
| 12. | 380-5783 | [1] | SUPPORT AS | |
| 13. | 8T-4183 CM | [6] | BOLT (M12X1.75X40-MM) | |
| 14. | 8T-4223 C | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4121 C | [32] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4139 CM | [12] | BOLT (M12X1.75X30-MM) | |
| 17. | 8T-4182 CM | [8] | BOLT (M10X1.5X45-MM) | |
| 18. | 8T-4195 CM | [20] | BOLT (M10X1.5X30-MM) | |
| 19. | 5P-1076 C | [10] | WASHER-HARD (13.5X30X4-MM THK) | |
| 20. | 344-5675 CM | [4] | NUT (M10X1.5-THD) | |
| 21. | 234-3545 C | [4] | PLATE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54230506
269-2010: LINES GP-CENTRAL LUBRICATION
269-2010 LINES GP-CENTRAL LUBRICATION -HIGH LIFT MACHINES
S/N MAL1-103
PART OF 264-1082 LUBRICATION AR-AUTOMATIC
S/N MAL1-103
PART OF 264-1082 LUBRICATION AR-AUTOMATIC
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 6K-0806 | [1] | STRAP-CABLE | |
| 3. | 111-4839 | [1] | STRAP | |
| 4. | 114-9325 | [1] | CLAMP-DOUBLE | |
| 5. | 178-2776 | [2] | HOSE AS | |
| 6. | 198-3897 | [3] | SPACER (11X20X25-MM THK) | |
| 7. | 220-1581 | [2] | HOSE AS | |
| 8. | 268-6372 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 7X-2545 M | [1] | BOLT (M10X1.5X150-MM) | |
| 10. | 8C-8451 M | [1] | BOLT (M6X1X40-MM) | |
| 11. | 111-4838 | [1] | CLIP | |
| 12. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4136 M | [11] | BOLT (M10X1.5X25-MM) | |
| 14. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 15. | 9M-4995 | [14] | CLIP | |
| 16. | 206-2722 E | GUARD-HOSE (59-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP54230507
269-2010: LINES GP-CENTRAL LUBRICATION
269-2010 LINES GP-CENTRAL LUBRICATION -HIGH LIFT MACHINES
S/N MAL1-UP
PART OF 264-1082, 345-7039 LUBRICATION AR-AUTOMATIC
S/N MAL1-UP
PART OF 264-1082, 345-7039 LUBRICATION AR-AUTOMATIC
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 114-9325 | [1] | CLAMP-DOUBLE | |
| 2. | 177-3433 | [2] | HOSE AS | |
| 3. | 198-3897 | [1] | SPACER (11X20X25-MM THK) | |
| 4. | 220-1581 | [2] | HOSE AS | |
| 6. | 268-6372 | [1] | BRACKET AS | |
| 7. | 111-4836 | [1] | CLIP | |
| 8. | 3S-2093 | [5] | STRAP-CABLE | |
| 9. | 8C-8451 M | [1] | BOLT (M6X1X40-MM) | |
| 10. | 8T-4121 C | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4136 CM | [5] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 13. | 9M-4995 C | [12] | CLIP | |
| 14. | 7Y-5074 E | GUARD-HOSE (73-CM) | ||
| 15. | 168-6514 | [1] | SPACER (10.74X17.14X50.8-MM THK) | |
| 16. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 17. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP54230508
281-0626: LINES GP-CENTRAL LUBRICATION
281-0626 LINES GP-CENTRAL LUBRICATION
S/N MAL1-UP
PART OF 264-1081 LUBRICATION AR-AUTOMATIC
S/N MAL1-UP
PART OF 264-1081 LUBRICATION AR-AUTOMATIC
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 114-9325 | [1] | CLAMP-DOUBLE | |
| 2. | 178-2776 | [2] | HOSE AS | |
| 3. | 198-3897 | [1] | SPACER (11X20X25-MM THK) | |
| 4. | 220-1581 | [2] | HOSE AS | |
| 5. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 6. | 268-6372 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 7. | 111-4836 | [1] | CLIP | |
| 8. | 3S-2093 | [5] | STRAP-CABLE | |
| 9. | 8C-8451 M | [1] | BOLT (M6X1X40-MM) | |
| 10. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 13. | 9M-4995 | [12] | CLIP | |
| 14. | 7Y-5074 E | GUARD-HOSE (75-CM) | ||
| 15. | 168-6514 | [1] | SPACER (10.74X17.14X50.8-MM THK) | |
| 16. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP54230509
269-2011: LINES GP-FRONT LUBRICATION
269-2011 LINES GP-FRONT LUBRICATION -HIGH LIFT MACHINES
S/N MAL1-103
PART OF 264-1082 LUBRICATION AR-AUTOMATIC
S/N MAL1-103
PART OF 264-1082 LUBRICATION AR-AUTOMATIC
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 177-3475 | [4] | CONNECTOR (REDUCER) | |
| 3. | 177-3477 | [1] | ELBOW | |
| 4. | 177-3484 | [2] | BOLT AS-SPECIAL (BANJO) | |
| 5. | 177-3489 | [1] | COUPLING AS | |
| 6. | 177-3490 | [2] | ELBOW AS | |
| 7. | 178-2723 | [2] | ELBOW | |
| 8. | 192-5918 | [2] | BRACKET AS | |
| 9. | 251-2138 | [2] | ELBOW | |
| 10. | 251-2139 | [10] | BRACKET | |
| 11. | 251-7294 | [2] | BUSHING-SPECIAL (BANJO) | |
| 12. | 256-4884 | [1] | BRACKET | |
| 13. | 269-1884 | [1] | TUBE AS | |
| 14. | 269-1885 | [1] | TUBE AS | |
| 15. | 278-2078 | [1] | ELBOW | |
| 16. | 282-8798 Y | [1] | VALVE & LINES GP-LUBRICATION | |
| 17. | 299-5321 | [2] | CLAMP AS | |
| 18. | 300-4616 | [1] | TUBE AS | |
| 19. | 300-4617 | [1] | TUBE AS | |
| 20. | 033-8248 | [3] | CLIP (LOOP) | |
| 21. | 4M-8973 | [1] | ELBOW | |
| 22. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 23. | 5P-9299 | [16] | CLIP (LOOP) | |
| 24. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 25. | 7X-2536 M | [2] | BOLT (M8X1.25X14-MM) | |
| 26. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 27. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4136 M | [12] | BOLT (M10X1.5X25-MM) | |
| 29. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 30. | 8T-4200 M | [10] | BOLT (M8X1.25X16-MM) | |
| 31. | 8T-4224 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| 32. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
