FRAME AND BODY
FENDER GPFRAME GP
FENDER GP
HITCH GP
HOOD GP
LADDER GP
LINES GP
FRAME AND BODY
FENDER GP
#SEBP54240550
274-7051: HARDWARE GP-FENDER
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 243-4013 | [2] | BLOCK |
#SEBP54240551
387-5523: HARDWARE GP-REAR FRAME
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS#SEBP54240552
300-5461: HINGE GP-ROADING FENDER
300-5461 HINGE GP-ROADING FENDER -RH
S/N TAL1-UP
PART OF 274-7040 FENDER GP-ROADING
S/N TAL1-UP
PART OF 274-7040 FENDER GP-ROADING
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-4627 | [2] | PIN-COTTER | |
| 2. | 3B-4629 | [1] | PIN-COTTER | |
| 3. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 132-1928 | [1] | PIN AS | |
| 5. | 300-5399 | [1] | HINGE AS (RH) | |
| 6. | 300-5451 | [1] | ROD AS | |
| 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 7. | 300-5458 | [1] | CHANNEL AS (RH) | |
| 8. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) |
#SEBP54240553
300-5462: HINGE GP-ROADING FENDER
300-5462 HINGE GP-ROADING FENDER -LH
S/N TAL1-UP
PART OF 274-7040 FENDER GP-ROADING
S/N TAL1-UP
PART OF 274-7040 FENDER GP-ROADING
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-4627 | [2] | PIN-COTTER | |
| 2. | 3B-4629 | [1] | PIN-COTTER | |
| 3. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 132-1928 | [1] | PIN AS | |
| 5. | 300-5400 | [1] | HINGE AS (LH) | |
| 6. | 300-5451 | [1] | ROD AS | |
| 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 7. | 300-5456 | [1] | CHANNEL AS (LH) | |
| 8. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) |
#SEBP54240554
119-4401: HITCH GP-ARTICULATING
119-4401 HITCH GP-ARTICULATING
S/N TAL1-UP
PART OF 236-9000, 369-7106 CHASSIS AR
S/N TAL1-UP
PART OF 236-9000, 369-7106 CHASSIS AR
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-3934 | [2] | CUP-BEARING | |
| 2. | 1V-8848 B | [1] | SHIM PACK (INCLUDES 20-SHIMS) | |
| 3. | 1V-8852 | [1] | CAP | |
| 4. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 5. | 3F-7183 | [2] | CONE-BEARING | |
| 6. | 4K-6780 | [1] | SPACER | |
| 7. | 4K-6781 | [1] | SPACER | |
| 8. | 4K-7461 | [1] | SEAL-LIP TYPE | |
| 9. | 4K-7462 | [1] | SEAL-LIP TYPE | |
| 10. | 6H-3999 | [2] | SEAL-LIP TYPE | |
| 11. | 7D-8636 | [2] | CONE-BEARING | |
| 12. | 7D-8637 | [2] | CUP-BEARING | |
| 13. | 7G-8839 | [1] | SPACER (13.5X57X6-MM THK) | |
| 14. | 115-2955 | [1] | PIN AS | |
| 15. | 115-3183 | [1] | CAP | |
| 16. | 118-8276 B | [1] | SHIM PACK (INCLUDES 20-SHIMS) | |
| 17. | 134-3079 | [1] | PLATE | |
| 18. | 134-3080 | [1] | PIN | |
| 19. | 134-3081 | [1] | CAP | |
| 20. | 137-7668 B | [1] | SHIM PACK (INCLUDES 19-SHIMS) | |
| 21. | 137-7669 | [1] | CAP | |
| 22. | 4V-1901 | [2] | BUSHING | |
| 23. | 7X-2549 M | [6] | BOLT (M12X1.75X100-MM) | |
| 24. | 8T-4123 | [2] | WASHER (3.62X5.75X0.375-MM THK) | |
| 25. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 26. | 259-2627 M | [6] | BOLT (M12X1.75X40-MM) | |
| 27. | 8T-4223 | [20] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 8T-5041 M | [8] | BOLT (M12X1.75X120-MM) | |
| 29. | 287-5701 M | [2] | BOLT (M20X2.5X50-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP54240555
292-6010: HOOD & GUARD GP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125-7037 | [1] | INSERT | |
| 2. | 131-1586 | [2] | ROD AS | |
| 3. | 239-8410 | [1] | PLATE | |
| 4. | 242-0772 Y | [1] | GRILL GP-RADIATOR | |
| 5. | 244-1046 | [2] | BRACKET | |
| 6. | 361-4443 | [1] | PIPE AS | |
| 8. | 250-5593 Y | [1] | PANEL GP-SIDE (HOOD, LH) | |
| 9. | 250-5594 | [1] | PANEL GP-SIDE (RH) | |
| 7X-0603 | [7] | WASHER-HARD (9.9X35X2.5-MM THK) | ||
| 148-8240 | [7] | CLIP | ||
| 240-9133 | [1] | INSULATION-HOOD (RH) | ||
| 250-5596 | [1] | PANEL AS-SIDE (RH) | ||
| 10. | 250-5599 Y | [1] | PANEL GP-TOP (HOOD) | |
| 11. | 252-5175 | [1] | BRACKET AS | |
| 12. | 258-7481 | [1] | SUPPORT AS | |
| 13. | 252-5182 | [1] | BRACKET AS | |
| 14. | 292-6003 Y | [1] | DOOR GP-ACCESS (HOOD SIDE, LH) | |
| 15. | 292-6004 Y | [1] | DOOR GP-ACCESS (HOOD SIDE, RH) | |
| 16. | 292-6009 | [1] | GRILL AS-TOP (HOOD) | |
| 17. | 3B-4611 | [2] | PIN-COTTER | |
| 18. | 4M-7470 | [6] | GROMMET | |
| 19. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 20. | 7X-7729 | [42] | WASHER (11X25X3-MM THK) | |
| 21. | 8T-4121 | [38] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4133 M | [20] | NUT (M10X1.5-THD) | |
| 23. | 8T-4196 M | [56] | BOLT (M10X1.5X35-MM) | |
| 24. | 9M-5884 | [6] | BUMPER | |
| 25. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 26. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 27. | 6V-6604 D | SEAL (0.9-M) | ||
| 28. | 126-8472 E | SEAL (7.5-CM EACH) | ||
| 29. | 310-7066 J | SEAL (1160-MM) | ||
| 29A. | 310-7066 J | SEAL (250-MM) | ||
| 29B. | 310-7066 J | SEAL (290-MM) | ||
| 30. | 300-7318 E | SEAL (148-CM) | ||
| 31. | 120-5281 E | SEAL (103.5-CM EACH) | ||
| 32. | 190-6616 E | SEAL (115-CM) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE MILLIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54240556
236-8978: LADDER GP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-8106 | [32] | SPACER (11.13X19.05X15-MM THK) | |
| 2. | 234-1530 | [4] | STEP AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 234-1531 | [3] | STEP | |
| 4. | 234-3545 | [16] | PLATE | |
| 5. | 234-5101 | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 234-5107 | [8] | SUPPORT-STEP (RUBBER) | |
| 7. | 243-6390 | [1] | HANDRAIL AS (LH) | |
| 8. | 243-6391 | [1] | HANDRAIL AS (RH) | |
| 9. | 243-6409 | [1] | HANDRAIL AS (LH) | |
| 10. | 243-6410 | [1] | HANDRAIL AS (RH) | |
| 11. | 244-3541 | [1] | LADDER AS (LH) | |
| 12. | 309-3949 | [1] | SUPPORT AS | |
| 13. | 245-9087 | [1] | LADDER AS (RH) | |
| 14. | 5P-1076 | [10] | WASHER-HARD (13.5X30X4-MM THK) | |
| 15. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 16. | 8T-4121 | [48] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4139 M | [22] | BOLT (M12X1.75X30-MM) | |
| 18. | 8T-4186 M | [32] | BOLT (M10X1.5X40-MM) | |
| 19. | 8T-4195 M | [28] | BOLT (M10X1.5X30-MM) | |
| 20. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
#SEBP54240557
236-8978: LADDER GP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-8106 | [32] | SPACER (11.13X19.05X15-MM THK) | |
| 2. | 234-1530 | [4] | STEP AS | |
| 3. | 234-1531 | [3] | STEP | |
| 4. | 234-3545 | [16] | PLATE | |
| 5. | 234-5101 | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 234-5107 | [8] | SUPPORT-STEP (RUBBER) | |
| 7. | 243-6390 | [1] | HANDRAIL AS (LH) | |
| 8. | 243-6391 | [1] | HANDRAIL AS (RH) | |
| 9. | 243-6409 | [1] | HANDRAIL AS (LH) | |
| 10. | 243-6410 | [1] | HANDRAIL AS (RH) | |
| 11. | 244-3541 | [1] | LADDER AS (LH) | |
| 13. | 245-9087 | [1] | LADDER AS (RH) | |
| 14. | 5P-1076 | [10] | WASHER-HARD (13.5X30X4-MM THK) | |
| 15. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 16. | 8T-4121 | [48] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4139 M | [22] | BOLT (M12X1.75X30-MM) | |
| 18. | 8T-4186 M | [32] | BOLT (M10X1.5X40-MM) | |
| 19. | 8T-4195 M | [28] | BOLT (M10X1.5X30-MM) | |
| 20. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
#SEBP54240558
236-8978: LADDER GP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-8106 | [32] | SPACER (11.13X19.05X15-MM THK) | |
| 2. | 234-1530 C | [6] | STEP AS | |
| 3. | 234-1531 C | [1] | STEP | |
| 4. | 234-3545 C | [12] | PLATE | |
| 6. | 234-5107 | [8] | SUPPORT-STEP (RUBBER) | |
| 7. | 243-6390 | [1] | HANDRAIL AS (LH) | |
| 8. | 243-6391 | [1] | HANDRAIL AS (RH) | |
| 9. | 243-6409 | [1] | HANDRAIL AS (LH) | |
| 10. | 243-6410 | [1] | HANDRAIL AS (RH) | |
| 11. | 244-3541 | [1] | LADDER AS (LH) | |
| 13. | 245-9087 | [1] | LADDER AS (RH) | |
| 14. | 368-5091 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 15. | 368-5090 C | [4] | WASHER-HARD (11X25X3-MM THK) | |
| 16. | 344-1199 | [48] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 368-5078 | [17] | BOLT (M12X1.75X30-MM) | |
| 18. | 368-5079 | [32] | BOLT (M10X1.5X40-MM) | |
| 19. | 368-5080 C | [20] | BOLT (M10X1.5X30-MM) | |
| 20. | 279-6632 | [12] | WASHER (13.5X25.5X3-MM THK) | |
| 21. | 339-5757 C | [2] | PLATE | |
| 22. | 339-5758 C | [2] | PLATE | |
| 23. | 259-2627 M | [1] | BOLT (M12X1.75X40-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP54240559
276-8075: LINES GP-AUTOMATIC LUBRICATION
276-8075 LINES GP-AUTOMATIC LUBRICATION -LOADER FRAME, REAR
S/N TAL1-2274
PART OF 261-1443, 276-8093, 299-3912, 391-2012, 391-2015, 396-0770, 396-0771 LUBRICATION AR-AUTOMATIC
S/N TAL1-2274
PART OF 261-1443, 276-8093, 299-3912, 391-2012, 391-2015, 396-0770, 396-0771 LUBRICATION AR-AUTOMATIC
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [6] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3S-2093 | [1] | STRAP-CABLE | |
| 3. | 6K-0806 C | [4] | STRAP-CABLE | |
| 4. | 177-3463 C | [9] | CONNECTOR AS | |
| 5. | 177-3464 C | [4] | ELBOW AS | |
| 6. | 177-3465 | [1] | CONNECTOR AS | |
| 7. | 177-3466 | [2] | CONNECTOR | |
| 8. | 177-3468 | [2] | ELBOW | |
| 9. | 177-3475 | [2] | CONNECTOR (REDUCER) | |
| 10. | 250-0241 | [2] | TEE | |
| 11. | 277-3413 Y | [1] | VALVE & LINES GP-LUBRICATION (REAR) | |
| 12. | 277-3437 | [1] | TUBE | |
| 13. | 291-4211 | [4] | TEE | |
| 14. | 2B-2404 | [1] | CLIP | |
| 15. | 3B-8822 C | [2] | ELBOW | |
| 16. | 4D-8123 | [1] | CLIP | |
| 19. | 6D-4244 | [2] | CLIP (LOOP) | |
| 20. | 7D-1728 C | [1] | CLIP | |
| 21. | 4H-1225 | [1] | WASHER (11X22X6-MM THK) | |
| 22. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 23. | 8M-2770 C | [1] | CLIP (LOOP) | |
| 24. | 8M-2772 C | [14] | CLIP (LOOP) | |
| 25. | 8M-2773 | [3] | CLIP (LOOP) | |
| 26. | 8T-4121 | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 28. | 8T-4137 M | [16] | BOLT (M10X1.5X20-MM) | |
| 29. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 30. | 9X-8582 C | [5] | CLIP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
