AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

323-6079 JAW GP-COMBINATION S/N JMW1-UP PART OF 328-3991 JAW GP-COMBINATION MP15 MULTI PROCESSOR JAW


WORK TOOLS
JAW GP

MULTI PROCESSOR JAW MP15 MULTI PROCESSOR JAW JMW
 MP15, MP20, MP30 & MP40 Multi-Processor Jaws JMW00001-UP (MACHINE) SEBP5452 MP15 JMW   (2010)

WORK TOOLS

JAW GP
JAW GP-COMBINATION
323-6079 JAW GP-COMBINATION
JAW GP-COMBINATION
323-6091 JAW GP-COMBINATION
JAW GP-COMBINATION
325-0726 JAW GP-COMBINATION
JAW GP-COMBINATION
325-0812 JAW GP-COMBINATION
 

#SEBP54520001
 

323-6079: JAW GP-COMBINATION

323-6079 JAW GP-COMBINATION
S/N JMW1-UP
PART OF 328-3991 JAW GP-COMBINATION
i03593331 SEBP5452
3236079 JAW GP-COMBINATION Parts scheme
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0371 [1] PIN  
2. 169-0378 [1] SPACER (128X139X30-MM THK)  
3. 169-0379 B [2] SHIM (2.5-MM THK)  
4. 169-0380 B [2] SHIM (3-MM THK)  
5. 169-0381 B [2] SHIM (3.5-MM THK)  
6. 313-1305 [3] TOOTH  
7. 169-0385 [4] EDGE-CUTTING  
8. 169-0386 B [12] SHIM (1-MM THK)  
9. 169-0388 B [4] SHIM (1.5-MM THK)  
10. 169-3455 [2] BUSHING  
11. 169-6066 [1] EDGE-CUTTING  
12. 169-6072 B [5] SHIM (1-MM THK)  
13. 169-6073 B [1] SHIM (1.5-MM THK)  
14. 323-6080 [1] JAW AS (LOWER)  
14A. 318-1731 [1] PLATE-WEAR  
15. 323-6081 [1] JAW AS (UPPER)  
15A. 319-1575 [1] BAR-WEAR  
16. 145-4075 M [12] BOLT (M20X2.5X75-MM)  
17. 159-1122 [3] LOCKWASHER  
18. 7X-2454 M [3] BOLT (M24X3X110-MM)  
19. 7X-2575 M [2] BOLT (M24X3X60-MM)  
20. 7Y-5241 M [2] BOLT-SOCKET HEAD (M20X2.5X60-MM)  
21. 8T-3957 M [6] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
22. 8T-4001 M [5] NUT (M24X3-THD)  
23. 8T-4123 [14] WASHER (3.62X5.75X0.375-MM THK)  
24. 8T-4131 M [12] NUT (M20X2.5-THD)  
   
    AVAILABLE SERVICE REPAIR PARTS
25. 347-2495 J [1] HOLDER-TOOTH  
26. 347-2494 L [1] HOLDER-TOOTH  
  B   USE AS REQUIRED
  J   FOR LOWER JAW AS
  L   FOR UPPER JAW AS
  M   METRIC PART
 

#SEBP54520002
 

323-6091: JAW GP-COMBINATION

323-6091 JAW GP-COMBINATION
S/N JMX1-UP
PART OF 328-4010 JAW GP-COMBINATION
i03593721 SEBP5452
3236091 JAW GP-COMBINATION Parts scheme
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0385 [2] EDGE-CUTTING  
2. 169-0386 B [6] SHIM (1-MM THK)  
3. 169-0388 B [2] SHIM (1.5-MM THK)  
4. 169-4641 [2] BUSHING  
5. 169-6066 [1] EDGE-CUTTING  
6. 169-6072 B [5] SHIM (1-MM THK)  
7. 169-6073 B [1] SHIM (1.5-MM THK)  
8. 169-7109 [1] PIN  
9. 169-7111 [1] SPACER (143X159X42-MM THK)  
10. 169-7112 B [2] SHIM (2.5-MM THK)  
11. 169-7113 B [2] SHIM (3-MM THK)  
12. 169-7114 B [2] SHIM (3.5-MM THK)  
13. 169-7117 [2] EDGE-CUTTING  
14. 169-7118 B [6] SHIM (1-MM THK)  
15. 169-7119 B [2] SHIM (1.5-MM THK)  
16. 280-9200 [3] TOOTH  
17. 323-6092 [1] JAW AS (LOWER)  
17A. 226-3798 [2] PLATE-WEAR  
18. 323-6093 [1] JAW AS (UPPER)  
18A. 306-1121 [1] PLATE-WEAR  
19. 159-1122 [3] LOCKWASHER  
20. 170-3524 M [12] SCREW-FLAT HEAD  
21. 174-6390 M [2] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
22. 7X-2575 M [2] BOLT (M24X3X60-MM)  
23. 8T-0363 M [3] BOLT (M24X3X120-MM)  
24. 8T-3957 M [6] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
25. 8T-4001 M [5] NUT (M24X3-THD)  
26. 8T-4123 [14] WASHER (3.62X5.75X0.375-MM THK)  
27. 8T-4131 M [12] NUT (M20X2.5-THD)  
   
    AVAILABLE SERVICE REPAIR PARTS
28. 347-0729 J [1] HOLDER-TOOTH  
29. 347-0728 L [1] HOLDER-TOOTH  
  B   USE AS REQUIRED
  J   FOR LOWER JAW AS
  L   FOR UPPER JAW AS
  M   METRIC PART
 

#SEBP54520003
 

325-0726: JAW GP-COMBINATION

325-0726 JAW GP-COMBINATION
S/N JMY1-UP
PART OF 329-3573 JAW GP-COMBINATION
i03596342 SEBP5452
3250726 JAW GP-COMBINATION Parts scheme
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0385 [1] EDGE-CUTTING  
2. 169-0386 B [4] SHIM (1-MM THK)  
3. 169-0388 B [1] SHIM (1.5-MM THK)  
4. 169-7117 [4] EDGE-CUTTING  
5. 169-7118 B [12] SHIM (1-MM THK)  
6. 169-7119 B [4] SHIM (1.5-MM THK)  
7. 172-3722 [1] PIN  
8. 172-3723 [2] BUSHING  
9. 172-3724 [1] SPACER (180X194X42-MM THK)  
10. 172-3725 B [2] SHIM (2.5-MM THK)  
11. 172-3726 B [2] SHIM (3-MM THK)  
12. 172-3727 B [2] SHIM (3.5-MM THK)  
13. 280-9200 [3] TOOTH  
14. 325-0727 [1] JAW AS (LOWER)  
14A. 317-0894 [2] PLATE-WEAR  
15. 325-0728 [1] JAW AS (UPPER)  
15A. 317-3573 [1] PLATE-WEAR  
16. 144-2715 M [9] SCREW-FLAT HEAD (M20X2.5X100-MM)  
17. 159-1122 [3] LOCKWASHER  
18. 170-3524 M [6] SCREW-FLAT HEAD  
19. 6V-8200 M [6] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
20. 7X-2575 M [2] BOLT (M24X3X60-MM)  
21. 8T-0363 M [3] BOLT (M24X3X120-MM)  
22. 8T-4001 M [5] NUT (M24X3-THD)  
23. 8T-4123 [15] WASHER (3.62X5.75X0.375-MM THK)  
24. 8T-4131 M [15] NUT (M20X2.5-THD)  
   
    AVAILABLE SERVICE REPAIR PARTS
25. 347-2503 J [1] HOLDER-TOOTH  
26. 347-2502 L [1] HOLDER-TOOTH  
  B   USE AS REQUIRED
  J   FOR LOWER JAW AS
  L   FOR UPPER JAW AS
  M   METRIC PART
 

#SEBP54520004
 

325-0812: JAW GP-COMBINATION

325-0812 JAW GP-COMBINATION
S/N JMZ1-UP
PART OF 329-3575 JAW GP-COMBINATION
i03598060 SEBP5452
3250812 JAW GP-COMBINATION Parts scheme 3250812 JAW GP-COMBINATION Parts scheme
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0385 [1] EDGE-CUTTING  
2. 169-0386 B [3] SHIM (1-MM THK)  
3. 169-0388 B [1] SHIM (1.5-MM THK)  
4. 313-1306 [3] TOOTH  
5. 172-5903 [2] EDGE-CUTTING  
6. 172-5904 B [6] SHIM (1-MM THK)  
7. 172-5905 B [2] SHIM (1.5-MM THK)  
8. 172-5931 [2] EDGE-CUTTING  
9. 172-5932 B [2] SHIM (1.5-MM THK)  
10. 172-5933 B [6] SHIM (1-MM THK)  
11. 173-1681 [1] PIN  
12. 173-1682 [2] BUSHING  
13. 173-1684 [1] SPACER (210X224X69-MM THK)  
14. 173-1686 B [2] SHIM (4.5-MM THK)  
15. 173-1687 B [2] SHIM (5-MM THK)  
16. 173-1688 B [2] SHIM (5.5-MM THK)  
17. 325-0802 [1] JAW AS (LOWER)  
17A. 321-9877 [3] PLATE-WEAR  
18. 325-0807 [1] JAW AS (UPPER)  
18A. 321-9913 [1] PLATE  
18B. 321-9921 [1] PLATE-WEAR  
19. 144-2698 M [7] SCREW-FLAT HEAD (M20X2.5X90-MM)  
20. 144-3087 M [10] SCREW-FLAT HEAD (M20X2.5X120-MM)  
21. 169-3177 [3] LOCKWASHER  
22. 7X-2575 M [2] BOLT (M24X3X60-MM)  
23. 7X-2584 M [3] BOLT (M30X3.5X140-MM)  
24. 8C-8722 M [3] NUT (M30X3.5-THD)  
25. 8T-4001 M [2] NUT (M24X3-THD)  
26. 8T-4123 [17] WASHER (3.62X5.75X0.375-MM THK)  
27. 8T-4131 M [17] NUT (M20X2.5-THD)  
28. 8T-4944 M [6] BOLT-SOCKET HEAD (M16X2X40-MM)  
   
    AVAILABLE SERVICE REPAIR KITS
29. 347-2511 J [1] TOOTH AS  
30. 347-2510 L [1] TOOTH AS  
  B   USE AS REQUIRED
  J   FOR LOWER JAW AS
  L   FOR UPPER JAW AS
  M   METRIC PART
 

#SEBP54520005
 

328-3991: JAW GP-COMBINATION

328-3991 JAW GP-COMBINATION
S/N JMW1-UP
FOR USE WITH MP15 MULTI-PROCESSOR
i03593308 SEBP5452
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  323-6079 Y [1] JAW GP-COMBINATION  
  Y [1] PLATE & FILM GP  
   
  169-6047 [1] KIT-MAINTENANCE  
  169-0386 J [8] SHIM (1-MM THK)  
  169-0388 J [4] SHIM (1.5-MM THK)  
  169-6072 J [3] SHIM (1-MM THK)  
  169-6073 J [1] SHIM (1.5-MM THK)  
  202-6344 [1] BOX AS-STORAGE  
  136-0155 M [2] SETSCREW (M4X0.7X8-MM)  
  J   THESE PARTS MUST BE PACKED INTO THE BOX AS-STORAGE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54520006
 

328-4010: JAW GP-COMBINATION

328-4010 JAW GP-COMBINATION
S/N JMX1-UP
FOR USE WITH MP20 MULTI-PROCESSOR
i03593681 SEBP5452
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  323-6091 Y [1] JAW GP-COMBINATION  
  Y [1] PLATE & FILM GP  
   
  169-6051 [1] KIT-MAINTENANCE  
  169-0386 J [4] SHIM (1-MM THK)  
  169-0388 J [2] SHIM (1.5-MM THK)  
  169-6072 J [3] SHIM (1-MM THK)  
  169-6073 J [1] SHIM (1.5-MM THK)  
  169-7118 J [4] SHIM (1-MM THK)  
  169-7119 J [2] SHIM (1.5-MM THK)  
  202-6344 [1] BOX AS-STORAGE  
  136-0155 M [2] SETSCREW (M4X0.7X8-MM)  
  J   PARTS MUST BE PACKED IN THE BOX AS-STORAGE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54520007
 

329-3573: JAW GP-COMBINATION

329-3573 JAW GP-COMBINATION
S/N JMY1-UP
FOR USE WITH MP30 MULTI-PROCESSOR
i03596280 SEBP5452
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  325-0726 Y [1] JAW GP-COMBINATION  
  Y [1] PLATE & FILM GP  
   
  172-3738 [1] KIT-MAINTENANCE  
  169-0386 J [3] SHIM (1-MM THK)  
  169-0388 J [1] SHIM (1.5-MM THK)  
  169-7118 J [8] SHIM (1-MM THK)  
  169-7119 J [4] SHIM (1.5-MM THK)  
  202-6344 [1] BOX AS-STORAGE  
  136-0155 M [2] SETSCREW (M4X0.7X8-MM)  
  J   THESE PARTS MUST BE PACKED IN THE BOX AS-STORAGE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54520008
 

329-3575: JAW GP-COMBINATION

329-3575 JAW GP-COMBINATION
S/N JMZ1-UP
FOR USE WITH MP40 MULTI-PROCESSOR
i03597975 SEBP5452
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  325-0812 Y [1] JAW GP-COMBINATION  
  329-3570 Y [1] PLATE & FILM GP  
   
  173-1690 [1] KIT-MAINTENANCE  
  169-0386 J [2] SHIM (1-MM THK)  
  169-0388 J [1] SHIM (1.5-MM THK)  
  172-5904 J [4] SHIM (1-MM THK)  
  172-5905 J [2] SHIM (1.5-MM THK)  
  172-5932 J [2] SHIM (1.5-MM THK)  
  172-5933 J [4] SHIM (1-MM THK)  
  202-6344 [1] BOX AS-STORAGE  
  136-0155 M [2] SETSCREW (M4X0.7X8-MM)  
  J   THESE PARTS MUST BE PACKED IN THE BOX AS-STORAGE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54520009
 

323-6082: JAW GP-CRUSHER

323-6082 JAW GP-CRUSHER
S/N JMW1-UP
PART OF 328-3994 JAW GP-CRUSHER
i03593337 SEBP5452
3236082 JAW GP-CRUSHER Parts scheme
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0371 [1] PIN  
2. 169-0378 [1] SPACER (128X139X30-MM THK)  
3. 169-0379 B [2] SHIM (2.5-MM THK)  
4. 169-0380 B [2] SHIM (3-MM THK)  
5. 169-0381 B [2] SHIM (3.5-MM THK)  
6. 313-1305 [6] TOOTH  
7. 169-0385 [2] EDGE-CUTTING  
8. 169-0386 B [6] SHIM (1-MM THK)  
9. 169-0388 B [2] SHIM (1.5-MM THK)  
10. 169-3455 [2] BUSHING  
11. 323-6083 [1] JAW AS (LOWER)  
11A. 318-1731 [1] PLATE-WEAR  
12. 323-6084 [1] JAW AS (UPPER)  
13. 145-4075 M [6] BOLT (M20X2.5X75-MM)  
14. 159-1122 [6] LOCKWASHER  
15. 7X-2454 M [6] BOLT (M24X3X110-MM)  
16. 7X-2575 M [2] BOLT (M24X3X60-MM)  
17. 8T-3957 M [6] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
18. 8T-4001 M [8] NUT (M24X3-THD)  
19. 8T-4123 [6] WASHER (3.62X5.75X0.375-MM THK)  
20. 8T-4131 M [6] NUT (M20X2.5-THD)  
   
    AVAILABLE SERVICE REPAIR PARTS
21. 347-2495 J [1] HOLDER-TOOTH  
22. 347-2494 L [1] HOLDER-TOOTH  
  B   USE AS REQUIRED
  J   FOR LOWER JAW AS
  L   FOR UPPER JAW AS
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Jaw - Check
MP15, MP20, MP30 and MP40 Multi-Processors
Jaw - Repair
MP15, MP20, MP30 and MP40 Multi-Processors
Special Instruction
Replacement Procedure for the Service Repair Parts on the Multi-Processor Crusher Jaws{6349}
Replacement Procedure for the Service Repair Parts on the Multi-Processor Crusher Jaws{6349}
Replacement Procedure for the Service Repair Parts on the Multi Processor Shear Jaws{0679, 6349}
Replacement Procedure for the Service Repair Parts on the Multi Processor Shear Jaws{0679, 6349}
Replacement Procedure Service Repair Parts on Multi-Processor Pulverizer Jaws{6349}
Replacement Procedure Service Repair Parts on Multi-Processor Pulverizer Jaws{6349}
Conversion Procedure on Certain Multi Processor Jaw Sets{6307, 6348, 6349}
Conversion Procedure on Certain Multi Processor Jaw Sets{6307, 6348, 6349}
Specifications
Combination Jaw, Crusher Jaw, Pulverizer Jaw, and Shear Jaw
MP15, MP20, MP30 and MP40 Multi-Processors
Disassembly and Assembly
Shear Jaw - Disassemble
MP15, MP20, MP30 and MP40 Multi-Processors
Shear Jaw - Assemble
MP15, MP20, MP30 and MP40 Multi-Processors
Crusher Jaw - Disassemble
MP15, MP20, MP30 and MP40 Multi-Processors
Crusher Jaw - Assemble
MP15, MP20, MP30 and MP40 Multi-Processors
Pulverizer Jaw - Disassemble
MP15, MP20, MP30 and MP40 Multi-Processors
Pulverizer Jaw - Assemble
MP15, MP20, MP30 and MP40 Multi-Processors
Combination Jaw - Disassemble
MP15, MP20, MP30 and MP40 Multi-Processors
Combination Jaw - Assemble
MP15, MP20, MP30 and MP40 Multi-Processors
Combination Jaw, Crusher Jaw, Pulverizer Jaw and Shear Jaw - Remove
MP15, MP20, MP30 and MP40 Multi-Processors
Combination Jaw, Crusher Jaw, Pulverizer Jaw and Shear Jaw - Install
MP15, MP20, MP30 and MP40 Multi-Processors
Service Magazine
Cracks In Wear Plates on Certain Work Tools {6110, 6344, 6349, 7000}
Cracks In Wear Plates on Certain Work Tools {6110, 6344, 6349, 7000}
Service Repair Parts Are Available for Certain Multi-Processor Jaws {6349}
2011/01/31

Caterpillar Parts SIS Catalog MP15 :

JAW GP-COMBINATION
323-6091 JAW GP-COMBINATION
JAW GP-COMBINATION
325-0726 JAW GP-COMBINATION
JAW GP-COMBINATION
325-0812 JAW GP-COMBINATION
328-3991 JAW GP-COMBINATION
328-4010 JAW GP-COMBINATION
329-3573 JAW GP-COMBINATION
329-3575 JAW GP-COMBINATION
JAW GP-CRUSHER
323-6082 JAW GP-CRUSHER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.