AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

148-4626 DRIVE GP-SWING -WITHOUT MOTOR, REAR S/N BYP1-UP PART OF 227-6130 DRIVE GP-SWING 390D EXCAVATOR


HYDRAULIC SYSTEM
DRIVE GP
FILTER GP

EXCAVATOR 390D EXCAVATOR BYP
 390D Excavator BYP00001-UP (MACHINE) POWERED BY C18 Engine SEBP5615 390D BYP   (2010)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
DRIVE GP-SWING
148-4598 DRIVE GP-SWING
DRIVE GP-SWING
148-4626 DRIVE GP-SWING
DRIVE GP-SWING
227-6130 DRIVE GP-SWING
DRIVE GP-SWING
227-6131 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
148-4627 FASTENER GP-SWING & FINAL DR
 

#SEBP56150490
 

148-4626: DRIVE GP-SWING

148-4626 DRIVE GP-SWING -WITHOUT MOTOR, REAR
S/N BYP1-UP
PART OF 227-6130 DRIVE GP-SWING
i03545101 SEBP5615
1484626 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4602 [4] GEAR-PLANETARY (24-TEETH)  
2. 094-1528 [8] WASHER (53X84X1-MM THK)  
3. 148-4608 [4] SHAFT-PLANETARY  
4. 191-2525 [1] COVER-HOUSING  
5. 148-4600 [1] GEAR-SUN (17-TEETH)  
6. 7I-7684 M [2] SPACER (50X79.6X6-MM THK)  
7. 199-4672 [1] CONNECTOR AS  
  6V-9746 [1] SEAL-O-RING  
8. 199-4674 [1] PIPE AS  
9. 096-1441 [1] RING-RETAINING  
10. 093-1730 [1] RING-RETAINING  
11. 148-4601 [1] GEAR-SUN (17-TEETH)  
12. 191-2511 [1] CARRIER-PLANETARY  
13. 114-1322 [1] RING-RETAINING  
14. 148-4607 [1] CARRIER-PLANETARY  
15. 148-4604 [1] GEAR-RING (67-TEETH)  
18. 110-7149 [1] RING-RETAINING  
19. 9U-8693 [1] BEARING-ROLLER  
20. 7I-7619 [1] BEARING-ROLLER  
21. 128-9170 [2] SEAL-LIP TYPE  
22. 199-4496 [1] SHAFT-PINION  
23. 7I-7611 [1] CAGE  
24. 453-3447 M [10] BOLT (M12X1.75X40-MM)  
25. 451-2182 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 5M-4454 [1] SEAL-O-RING  
27. 191-2524 [1] HOUSING  
28. 6V-7238 [1] VALVE-SHUTOFF  
29. 3K-0360 [1] SEAL-O-RING  
30. 148-4611 [8] WASHER (71.3X112X1-MM THK)  
31. 191-2514 [8] BEARING AS  
32. 148-4609 [4] SHAFT-PLANETARY  
33. 148-4603 [4] GEAR-PLANETARY (24-TEETH)  
34. 099-5194 [8] PIN-SPRING  
35. 453-4169 M [24] BOLT (M16X2X200-MM)  
36. 451-2175 [24] WASHER-HARD (17.5X30X3.5-MM THK)  
37. 191-2513 [4] BEARING AS-ROLLER  
38. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 PIPE  
39. 171-9413 [1] SPACER (140.5X160X103.2-MM THK)  
40. 199-4681 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56150491
 

227-6130: DRIVE GP-SWING

227-6130 DRIVE GP-SWING -WITH MOTOR, REAR
S/N BYP1-UP
PART OF 227-6129 POWER TRAIN AR
i02121025 SEBP5615
2276130 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4626 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, REAR)  
2. 234-4534 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150492
 

227-6131: DRIVE GP-SWING

227-6131 DRIVE GP-SWING -WITH MOTOR, FRONT
S/N BYP1-UP
PART OF 227-6129 POWER TRAIN AR
i02124719 SEBP5615
2276131 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4598 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, FRONT)  
2. 234-4536 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150493
 

148-4627: FASTENER GP-SWING & FINAL DR

148-4627 FASTENER GP-SWING & FINAL DR
S/N BYP1-UP
PART OF 227-6129 POWER TRAIN AR
i01525436 SEBP5615
1484627 FASTENER GP-SWING & FINAL DR Parts scheme 1484627 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0283 M [48] BOLT (M30X3.5X110-MM)  
2. 9X-8399 [48] WASHER (33X56X6-MM THK)  
3. 173-9779 M [46] BOLT (M24X3X80-MM)  
4. 096-4755 [2] PIN  
6. 5P-0767 E HOSE (140-CM)  
6A. 5P-0767 E HOSE (70-CM)  
7. 2B-7561 [4] CORK  
8. 5D-1026 [2] CLAMP-BAND  
10. 114-1374 [1] SUPPORT  
11. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
12. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
13. 353-0518 [46] SPACER (24.5X44X14-MM THK)  
14. 199-4677 [1] SUPPORT  
15. 122-8705 M [1] U-BOLT (M10X1.5-MM THD)  
16. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
17. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
18. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 9V-5382 [1] GROMMET  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56150494
 

296-7116: FILTER & LINES GP-HYDRAULIC

296-7116 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N BYP1-UP
PART OF 294-1296 FILTER AR-HYDRAULIC
AN ATTACHMENT
i03907372 SEBP5615
2967116 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 7K-1181 [3] STRAP-CABLE  
3. 250-0729 Y [1] FILTER GP-OIL (HYDRAULIC)  
4. 307-4946 I [1] HOSE AS  
5. 307-4949 I [1] HOSE AS  
6. 307-5110 [1] SUPPORT  
7. 333-7152 [1] SUPPORT AS  
8. 148-8365 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-6876 [1] ELBOW  
9. 148-8372 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8721 [1] ELBOW  
10. 148-8418 [1] REDUCER AS  
  6V-8398 [1] SEAL-O-RING  
  6V-8942 [1] REDUCER-O-RING  
11. 164-5574 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8784 [1] TEE-FACE SEAL  
  6V-9746 [2] SEAL-O-RING  
12. 1S-0994 [1] CLIP (LOOP)  
13. 241-6215 [1] ELBOW AS  
  6V-8076 [1] ELBOW  
  3J-1907 [2] SEAL-O-RING  
14. 3J-1907 [1] SEAL-O-RING  
15. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
16. 6V-8556 [1] NUT (1-3/16-12-THD)  
17. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
18. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
20. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
21. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150495
 

294-1296: FILTER AR-HYDRAULIC

294-1296 FILTER AR-HYDRAULIC -FINE FILTRATION
S/N BYP1-UP
AN ATTACHMENT
i03907366 SEBP5615
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  296-7116 Y [1] FILTER & LINES GP-HYDRAULIC (FINE FILTRATION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150496
 

185-0336: FILTER GP-OIL

185-0336 FILTER GP-OIL -HYDRAULIC
S/N BYP1-UP
PART OF 296-7109 LINES GP-PILOT
i02281100 SEBP5615
1850336 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-0337 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
    -OR-
  126-1814 [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC, PILOT)  
2. 373-9231 [1] RING  
 

#SEBP56150497
 

188-4142: FILTER GP-OIL

188-4142 FILTER GP-OIL -HYDRAULIC RETURN
S/N BYP1-UP
PART OF 234-4531, 242-6878 FILTER GP-OIL
FIELD REPLACEMENT ORDER @@@@@419-8528@@@@@
i01674366 SEBP5615
1884142 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-2762 [1] PLATE  
2. 173-3529 JM [6] BOLT (M6X1X15-MM)  
3. 3T-7528 J [6] SEAL-O-RING  
4. 173-3513 [1] BASE  
5. 3E-4297 J [2] SEAL-O-RING  
6. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
7. 188-4143 [1] FILM-INSTRUCTION (HYDRAULIC OIL RETURN FILTER)  
8. 179-9806 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)(HYDRAULIC RETURN)  
9. 137-3623 J [4] SEAL-O-RING  
10. 6V-7658 J [2] SEAL-O-RING  
11. 177-2553 J [1] SEAL-O-RING  
12. 095-1681 J [1] SEAL-O-RING  
13. 173-3515 [1] RING-RETAINING  
14. 173-3516 [1] HANDLE  
15. 4J-7533 J [1] SEAL-O-RING  
16. 9S-4180 J [1] PLUG  
17. 137-3624 JM [8] SCREW (M3X0.5X5-MM)  
18. 137-3625 J [2] PAD  
19. 173-3517 [1] PLATE  
20. 137-3628 J [1] SHIM (0.1-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  201-9299 J [1] KIT-SERVICE (HYDRAULIC RETURN FILTER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP56150498
 

234-4531: FILTER GP-OIL

234-4531 FILTER GP-OIL -HYDRAULIC RETURN
S/N BYP1-UP
PART OF 227-0367 TANK & FILTER GP-HYDRAULIC
Type 1
i02110703 SEBP5615
2344531 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-8034 [2] VALVE AS-BYPASS  
2. 129-8053 Y [1] BASE GP-OIL FILTER (HYDRAULIC)  
3. 129-8055 [2] FLANGE  
4. 129-8056 [1] COVER  
5. 129-7815 [1] COVER  
6. 173-3507 [2] HOUSING AS  
7. 173-3510 [2] COVER  
8. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
9. 188-4142 Y [2] FILTER GP-OIL (HYDRAULIC RETURN)  
11. 242-6882 [1] COVER  
12. 242-6883 [1] GASKET  
13. 095-0759 M [2] SCREW-MACHINE (M6X1X3.4-MM)  
15. 123-2003 [4] SEAL-O-RING  
16. 159-7784 [1] SEAL-O-RING  
17. 3J-7354 [1] SEAL-O-RING  
18. 6J-2680 [4] SEAL-O-RING  
19. 6V-4298 M [8] BOLT (M5X0.8X16-MM)  
20. 6V-7609 [2] SEAL-O-RING  
21. 8T-0328 [8] WASHER-HARD (5.5X10X1-MM THK)  
22. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
23. 8T-4194 M [16] BOLT (M12X1.75X50-MM)  
24. 8T-4223 [32] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4956 M [10] BOLT (M12X1.75X35-MM)  
26. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
27. 9S-4182 [1] PLUG (7/16-20-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150499
 

234-4531: FILTER GP-OIL

234-4531 FILTER GP-OIL -HYDRAULIC RETURN
S/N BYP1-UP
PART OF 227-0367 TANK & FILTER GP-HYDRAULIC
Type 2
i05402440 SEBP5615
2344531 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-8034 [2] VALVE AS-BYPASS  
2. 129-8053 Y [1] BASE GP-OIL FILTER (HYDRAULIC)  
3. 129-8055 [2] FLANGE  
4. 129-8056 [1] COVER  
5. 129-7815 [1] COVER  
6. 173-3507 [2] HOUSING AS  
7. 173-3510 [2] COVER  
8. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
9. 419-8528 Y [2] FILTER GP-OIL (HYDRAULIC RETURN)  
11. 242-6882 [1] COVER  
12. 242-6883 [1] GASKET  
13. 095-0759 M [2] SCREW-MACHINE (M6X1X3.4-MM)  
15. 123-2003 [4] SEAL-O-RING  
16. 159-7784 [1] SEAL-O-RING  
17. 3J-7354 [1] SEAL-O-RING  
18. 6J-2680 [4] SEAL-O-RING  
19. 6V-4298 M [8] BOLT (M5X0.8X16-MM)  
20. 6V-7609 [2] SEAL-O-RING  
21. 8T-0328 [8] WASHER-HARD (5.5X10X1-MM THK)  
22. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
23. 8T-4194 M [16] BOLT (M12X1.75X50-MM)  
24. 8T-4223 [32] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4956 M [10] BOLT (M12X1.75X35-MM)  
26. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
27. 9S-4182 [1] PLUG (7/16-20-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Swing Drive Oil Level - Check
390D Excavator
Swing Drive Oil Sample - Obtain
390D Excavator
Swing Drive Oil - Change
390D Excavator
Specifications
Swing Drive
390D Excavator Machine System Specifications
Fasteners - Swing Drive and Final Drive
390D Excavator Machine System Specifications
Swing Drive
390D Excavator Machine System Specifications
Systems Operation
Swing Drive
390D Excavator Hydraulic System
Testing and Adjusting
Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
390D Excavator Hydraulic System
Disassembly and Assembly
Pump (Hydraulic Oil Cooler and Fan Drive) - Disassemble
390D Excavator Machine Systems
Pump (Hydraulic Oil Cooler and Fan Drive) - Assemble
390D Excavator Machine Systems
Swing Motor - Disassemble
390D Excavator Machine Systems
Swing Motor - Assemble
390D Excavator Machine Systems
Swing Drive - Remove
390D Excavator Machine Systems
Swing Drive - Install
390D Excavator Machine Systems
Swing Drive - Disassemble
390D Excavator Machine Systems
Swing Drive - Assemble
390D Excavator Machine Systems
Pump (Hydraulic Oil Cooler and Fan Drive) - Remove
390D Excavator Machine Systems
Pump (Hydraulic Oil Cooler and Fan Drive) - Install
390D Excavator Machine Systems
Service Magazine
Procedure for the Measurement of the Movement of the Swing Bearing {5459, 7063}
2012/11/30
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 390D :

DRIVE GP-SWING
148-4598 DRIVE GP-SWING
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
CYLINDER GP-STICK
570-1981 CYLINDER GP-STICK
CYLINDER GP-STICK
365-3312 CYLINDER GP-STICK
CYLINDER GP-STICK
363-1685 CYLINDER GP-STICK
CYLINDER GP-STICK
353-9625 CYLINDER GP-STICK
CYLINDER GP-BUCKET
570-1989 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
362-5365 CYLINDER GP-BUCKET
DRIVE GP-SWING
227-6130 DRIVE GP-SWING
DRIVE GP-SWING
227-6131 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
148-4627 FASTENER GP-SWING & FINAL DR
FILTER & LINES GP-HYDRAULIC
296-7116 FILTER & LINES GP-HYDRAULIC
294-1296 FILTER AR-HYDRAULIC
FILTER GP-OIL
185-0336 FILTER GP-OIL
FILTER GP-OIL
188-4142 FILTER GP-OIL
FILTER GP-OIL
234-4531 FILTER GP-OIL

Truck sale:

Caterpillar 390D
 
Caterpillar 390D
- Crawler Excavators
FINNING CANADA
Caterpillar 390D, bucket, Construction
14,264 
Caterpillar 390D, bucket, Construction
- bucket
FINNING CANADA
Caterpillar 390D, schaufel, Bau-Und Bergbauausrüstung
29.311 
Caterpillar 390D, schaufel, Bau-Und Bergbauausrüstung
- bucket
FINNING CANADA
 
387,487 
Caterpillar 390D, Construction
- Crawler Excavators
EMPIRE MACHINERY
Caterpillar CATBKT390D_47, Construction
12,500 
Caterpillar CATBKT390D_47, Construction
- bucket
KELLY TRACTOR CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.