AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

374-0032 LINES GP-BOOM S/N BYP1-UP PART OF 303-2689 BOOM AR Type 2 AN ATTACHMENT 390D EXCAVATOR


HYDRAULIC SYSTEM
LINES GP-BOOM
LINES GP-CYLINDER
LINES GP-BUCKET

EXCAVATOR 390D EXCAVATOR BYP
 390D Excavator BYP00001-UP (MACHINE) POWERED BY C18 Engine SEBP5615 390D BYP   (2010)

HYDRAULIC SYSTEM

LINES GP-BOOM
LINES GP-BOOM
338-6165 LINES GP-BOOM
LINES GP-BOOM
374-0032 LINES GP-BOOM
LINES GP-BOOM
374-0032 LINES GP-BOOM
LINES GP-BOOM
374-0033 LINES GP-BOOM
LINES GP-BOOM
382-7063 LINES GP-BOOM
 

#SEBP56150520
 

374-0032: LINES GP-BOOM

374-0032 LINES GP-BOOM
S/N BYP1-UP
PART OF 303-2689 BOOM AR
Type 2
AN ATTACHMENT
i06787183 SEBP5615
3740032 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2167 [5] SCREW-PURGE (3/8-24X1.164-IN)  
2. 138-5709 [23] GROMMET  
3. 317-4890 [3] TUBE AS  
4. 317-4891 [2] TUBE AS  
5. 333-4590 [1] TUBE AS  
6. 333-4591 [1] TUBE AS  
7. 333-4592 [1] TUBE AS  
8. 333-4593 [1] TUBE AS  
9. 333-4594 [1] PLATE  
10. 354-3803 I [2] HOSE AS  
11. 354-3837 I [1] HOSE AS  
12. 447-1707 CM [42] BOLT (M16X2X60-MM)  
13. 451-2175 C [116] WASHER-HARD (17.5X30X3.5-MM THK)  
14. 451-2183 M [10] NUT (M16X2-THD)  
15. 453-2837 CM [16] BOLT (M16X2X55-MM)  
16. 453-2838 M [38] BOLT (M16X2X70-MM)  
17. 453-4135 M [10] BOLT (M16X2X90-MM)  
18. 138-5708 [46] CLIP-HALF  
19. 1P-3705 C [6] SEAL-RECTANGULAR  
20. 1P-3706 [4] SEAL-RECTANGULAR  
21. 5P-8077 C [22] FLANGE-HALF  
22. 6H-3615 [5] PLUG-PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56150521
 

374-0033: LINES GP-BOOM

374-0033 LINES GP-BOOM -MASS
S/N BYP1-UP
PART OF 303-2690 BOOM AR-MASS
AN ATTACHMENT
i05737678 SEBP5615
3740033 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2167 [5] SCREW-PURGE (3/8-24X1.164-IN)  
2. 138-5709 [18] GROMMET  
3. 317-4860 [3] TUBE AS  
4. 333-4594 [1] PLATE  
5. 333-4604 [2] TUBE AS  
6. 333-4605 [1] TUBE AS  
7. 333-4606 [1] TUBE AS  
8. 363-2291 I [2] HOSE AS  
9. 363-2292 I [1] HOSE AS  
10. 447-1707 M [42] BOLT (M16X2X60-MM)  
11. 451-2175 [98] WASHER-HARD (17.5X30X3.5-MM THK)  
12. 451-2183 M [10] NUT (M16X2-THD)  
13. 453-2837 M [8] BOLT (M16X2X55-MM)  
14. 453-2838 M [28] BOLT (M16X2X70-MM)  
15. 453-4135 M [10] BOLT (M16X2X90-MM)  
16. 138-5708 [36] CLIP-HALF  
17. 1P-3705 [6] SEAL-RECTANGULAR  
18. 1P-3706 [2] SEAL-RECTANGULAR  
19. 5P-8077 [22] FLANGE-HALF  
20. 6H-3615 [5] PLUG-PROTECTION  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56150522
 

382-7063: LINES GP-BOOM

382-7063 LINES GP-BOOM -REACH
S/N BYP1-UP
PART OF 303-2688 BOOM AR-REACH
AN ATTACHMENT
i05736538 SEBP5615
3827063 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [5] PLUG-PROTECTION  
2. 9F-2167 [5] SCREW-PURGE (3/8-24X1.164-IN)  
3. 138-5708 [50] CLIP-HALF  
4. 138-5709 [25] GROMMET  
5. 317-4855 [3] TUBE AS  
6. 333-4594 [1] PLATE  
7. 354-3803 I [2] HOSE AS  
8. 354-3837 I [1] HOSE AS  
9. 353-0792 [1] TUBE GP-HYDRAULIC (BUCKET OPEN)  
10. 353-0793 [1] TUBE GP-HYDRAULIC (BUCKET CLOSE)  
11. 353-0794 [3] TUBE AS  
12. 353-0795 [2] TUBE GP-HYDRAULIC (BUCKET CONTROL)  
13. 353-0796 [1] TUBE AS  
14. 353-0797 [1] TUBE AS  
15. 453-4135 M [10] BOLT (M16X2X90-MM)  
16. 1P-3705 [6] SEAL-RECTANGULAR  
17. 1P-3706 [7] SEAL-RECTANGULAR  
19. 5P-8077 [22] FLANGE-HALF  
20. 453-2838 M [42] BOLT (M16X2X70-MM)  
21. 451-2183 M [10] NUT (M16X2-THD)  
22. 447-1707 M [42] BOLT (M16X2X60-MM)  
23. 453-2837 M [28] BOLT (M16X2X55-MM)  
24. 451-2175 [132] WASHER-HARD (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56150523
 

296-7112: LINES GP-BOOM CYLINDER

296-7112 LINES GP-BOOM CYLINDER -BOOM LOWERING CONTROL
S/N BYP1-UP
PART OF 297-0421 VALVE AR-BOOM LOWERING CONTROL
Type 1
AN ATTACHMENT
i03907394 SEBP5615
2967112 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [20] STRAP-CABLE  
2. 104-8783 I [1] HOSE AS  
3. 113-6442 I [1] HOSE AS  
4. 221-8859 [1] SENSOR AS-PRESSURE (BOOM LOWER)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  3K-0360 [1] SEAL-O-RING  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  171-0596 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
5. 260-8285 [2] BLOCK  
6. 260-8296 I [2] HOSE AS  
7. 270-5692 Y [1] VALVE GP-MANUAL (BOOM LOWER)  
8. 274-9053 Y [2] VALVE GP-LOAD CONTROL (BOOM)  
9. 302-3213 I [1] HOSE AS  
10. 302-3224 [1] BRACKET  
11. 302-3228 I [1] HOSE AS  
12. 302-3301 I [1] HOSE AS  
13. 307-4849 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  168-9352 [1] CONNECTOR  
14. 353-0685 [1] SUPPORT AS  
15. 353-0799 I [1] HOSE AS  
16. 361-8887 [2] SUPPORT AS  
17. 363-2354 [2] SUPPORT AS  
18. 358-7374 [1] TUBE AS  
19. 358-7375 [1] TUBE AS  
20. 108-3819 M [8] BOLT-SOCKET HEAD (M12X1.75X70-MM)  
21. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
22. 148-8336 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
23. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
24. 148-8362 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-6684 [1] ELBOW  
25. 148-8367 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
26. 148-8378 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
27. 148-8427 [1] TEE AS  
  6V-8398 [3] SEAL-O-RING  
  8T-6895 [1] TEE-UNION  
28. 148-8433 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
29. 149-5452 [1] UNION AS (STRAIGHT)  
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
30. 164-5606 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  8T-0078 [1] CONNECTOR  
31. 1P-3705 [6] SEAL-RECTANGULAR  
32. 4I-9521 [2] BAND-MARKER (RED, L1)  
33. 4I-9522 [2] BAND-MARKER (YELLOW, L2)  
34. 6V-9168 [1] NUT (11/16-16-THD)  
35. 6V-9169 [1] NUT (13/16-16-THD)  
36. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
38. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4186 M [8] BOLT (M10X1.5X40-MM)  
41. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4648 M [8] BOLT (M12X1.75X70-MM)  
44. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150524
 

296-7112: LINES GP-BOOM CYLINDER

296-7112 LINES GP-BOOM CYLINDER -BOOM LOWERING CONTROL
S/N BYP1-UP
PART OF 297-0421 VALVE AR-BOOM LOWERING CONTROL
Type 2
AN ATTACHMENT
i04665305 SEBP5615
2967112 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [20] STRAP-CABLE  
2. 104-8783 I [1] HOSE AS  
3. 113-6442 I [1] HOSE AS  
4. 366-9311 CY [1] SENSOR GP-PRESSURE (BOOM CYLINDER)  
5. 260-8285 [2] BLOCK  
6. 260-8296 I [2] HOSE AS  
7. 270-5692 Y [1] VALVE GP-MANUAL (BOOM LOWER)  
8. 369-8596 Y [2] VALVE GP-CHECK & RELIEF (BOOM LOWERING CONTROL VALVE)  
9. 302-3213 I [1] HOSE AS  
10. 302-3224 [1] BRACKET  
11. 302-3228 I [1] HOSE AS  
12. 302-3301 I [1] HOSE AS  
13. 296-7059 C [1] FITTING AS  
  3K-0360 [1] SEAL-O-RING  
  178-5883 [1] FITTING  
14. 353-0685 [1] SUPPORT AS  
15. 353-0799 I [1] HOSE AS  
16. 361-8887 [2] SUPPORT AS  
17. 363-2354 [2] SUPPORT AS  
18. 358-7374 [1] TUBE AS  
19. 358-7375 [1] TUBE AS  
20. 108-3819 M [8] BOLT-SOCKET HEAD (M12X1.75X70-MM)  
21. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
22. 148-8336 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
23. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
24. 148-8362 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-6684 [1] ELBOW  
25. 109-3656 [2] ELBOW  
26. 148-8378 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
27. 148-8427 [1] TEE AS  
  6V-8398 [3] SEAL-O-RING  
  8T-6895 [1] TEE-UNION  
28. 148-8433 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
29. 149-5452 [1] UNION AS (STRAIGHT)  
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
30. 164-5606 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  8T-0078 [1] CONNECTOR  
31. 1P-3705 [6] SEAL-RECTANGULAR  
32. 4I-9521 [2] BAND-MARKER (RED, L1)  
33. 4I-9522 [2] BAND-MARKER (YELLOW, L2)  
34. 6V-9168 [1] NUT (11/16-16-THD)  
35. 6V-9169 [1] NUT (13/16-16-THD)  
36. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
38. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4186 M [8] BOLT (M10X1.5X40-MM)  
41. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4648 M [8] BOLT (M12X1.75X70-MM)  
44. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
45. 3S-2093 C [1] STRAP-CABLE  
46. 3K-0360 [2] SEAL-O-RING  
47. 6V-8397 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150525
 

296-7112: LINES GP-BOOM CYLINDER

296-7112 LINES GP-BOOM CYLINDER -BOOM LOWERING CONTROL
S/N BYP1-UP
PART OF 297-0421 VALVE AR-BOOM LOWERING CONTROL
Type 3
AN ATTACHMENT
i04924054 SEBP5615
2967112 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [20] STRAP-CABLE  
2. 104-8783 I [1] HOSE AS  
3. 113-6442 I [1] HOSE AS  
4. 366-9311 Y [1] SENSOR GP-PRESSURE (BOOM CYLINDER)  
5. 260-8285 [2] BLOCK  
6. 260-8296 I [2] HOSE AS  
7. 270-5692 Y [1] VALVE GP-MANUAL (BOOM LOWER)  
8. 398-0845 CY [2] VALVE GP-CHECK & RELIEF  
9. 302-3213 I [1] HOSE AS  
10. 302-3224 [1] BRACKET  
11. 302-3228 I [1] HOSE AS  
12. 302-3301 I [1] HOSE AS  
13. 296-7059 [1] FITTING AS  
  3K-0360 [1] SEAL-O-RING  
  178-5883 [1] FITTING  
14. 353-0685 [1] SUPPORT AS  
15. 353-0799 I [1] HOSE AS  
16. 361-8887 [2] SUPPORT AS  
17. 363-2354 [2] SUPPORT AS  
18. 358-7374 [1] TUBE AS  
19. 358-7375 [1] TUBE AS  
20. 108-3819 M [8] BOLT-SOCKET HEAD (M12X1.75X70-MM)  
21. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
22. 148-8336 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
23. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
24. 148-8362 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-6684 [1] ELBOW  
25. 109-3656 [2] ELBOW  
26. 148-8378 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
27. 148-8427 [1] TEE AS  
  6V-8398 [3] SEAL-O-RING  
  8T-6895 [1] TEE-UNION  
28. 148-8433 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
29. 149-5452 [1] UNION AS (STRAIGHT)  
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
30. 164-5606 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  8T-0078 [1] CONNECTOR  
31. 1P-3705 [6] SEAL-RECTANGULAR  
32. 4I-9521 [2] BAND-MARKER (RED, L1)  
33. 4I-9522 [2] BAND-MARKER (YELLOW, L2)  
34. 6V-9168 [1] NUT (11/16-16-THD)  
35. 6V-9169 [1] NUT (13/16-16-THD)  
36. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
38. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4186 M [8] BOLT (M10X1.5X40-MM)  
41. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4648 M [8] BOLT (M12X1.75X70-MM)  
44. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
45. 3S-2093 [1] STRAP-CABLE  
46. 3K-0360 [2] SEAL-O-RING  
47. 6V-8397 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150526
 

296-7112: LINES GP-BOOM CYLINDER

296-7112 LINES GP-BOOM CYLINDER -BOOM LOWERING CONTROL
S/N BYP1-UP
PART OF 297-0421 VALVE AR-BOOM LOWERING CONTROL
Type 4
AN ATTACHMENT
i05989974 SEBP5615
2967112 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [20] STRAP-CABLE  
2. 104-8783 I [1] HOSE AS  
3. 113-6442 I [1] HOSE AS  
4. 434-8214 CY [1] SENSOR GP-PRESSURE (BOOM CYLINDER)  
5. 260-8285 [2] BLOCK  
6. 260-8296 I [2] HOSE AS  
7. 270-5692 Y [1] VALVE GP-MANUAL (BOOM LOWER)  
8. 398-0845 Y [2] VALVE GP-CHECK & RELIEF  
9. 302-3213 I [1] HOSE AS  
10. 302-3224 [1] BRACKET  
11. 302-3228 I [1] HOSE AS  
12. 302-3301 I [1] HOSE AS  
13. 296-7059 [1] FITTING AS  
  3K-0360 [1] SEAL-O-RING  
  178-5883 [1] FITTING  
14. 353-0685 [1] SUPPORT AS  
15. 302-3216 CI [1] HOSE AS  
16. 361-8887 [2] SUPPORT AS  
17. 363-2354 [2] SUPPORT AS  
18. 358-7374 [1] TUBE AS  
19. 358-7375 [1] TUBE AS  
20. 108-3819 M [8] BOLT-SOCKET HEAD (M12X1.75X70-MM)  
21. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
22. 148-8336 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
23. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
24. 148-8362 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-6684 [1] ELBOW  
25. 109-3656 [2] ELBOW  
26. 148-8378 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
27. 148-8427 [1] TEE AS  
  6V-8398 [3] SEAL-O-RING  
  8T-6895 [1] TEE-UNION  
28. 148-8433 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
29. 149-5452 [1] UNION AS (STRAIGHT)  
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
30. 153-6237 C [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9004 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
31. 1P-3705 [6] SEAL-RECTANGULAR  
32. 4I-9521 [2] BAND-MARKER (RED, L1)  
33. 4I-9522 [2] BAND-MARKER (YELLOW, L2)  
34. 6V-9168 [1] NUT (11/16-16-THD)  
35. 6V-9169 [1] NUT (13/16-16-THD)  
36. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
38. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4186 M [8] BOLT (M10X1.5X40-MM)  
41. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4648 M [8] BOLT (M12X1.75X70-MM)  
44. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
45. 3S-2093 [1] STRAP-CABLE  
46. 3K-0360 [2] SEAL-O-RING  
47. 6V-8397 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150527
 

353-9651: LINES GP-BOOM CYLINDER

353-9651 LINES GP-BOOM CYLINDER -LH
S/N BYP1-UP
PART OF 353-9648, 384-1157 CYLINDER & LINES GP-BOOM
AN ATTACHMENT
i03908039 SEBP5615
3539651 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-4793 [2] BLOCK  
2. 363-2441 [1] SUPPORT AS  
3. 361-8887 [1] SUPPORT AS  
4. 356-9235 [1] TUBE AS  
5. 356-9236 [1] TUBE AS  
6. 1P-3705 [4] SEAL-RECTANGULAR  
7. 453-3454 [4] WASHER-HARD (11X21X2.5-MM THK)  
8. 457-5821 M [4] BOLT (M10X1.5X35-MM)  
9. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 8T-4648 M [8] BOLT (M12X1.75X70-MM)  
11. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
12. 8T-6868 M [8] BOLT (M12X1.75X80-MM)  
  M   METRIC PART
 

#SEBP56150528
 

353-9652: LINES GP-BOOM CYLINDER

353-9652 LINES GP-BOOM CYLINDER -RH
S/N BYP1-UP
PART OF 353-9649, 384-1136 CYLINDER & LINES GP-BOOM
AN ATTACHMENT
i03908037 SEBP5615
3539652 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-4793 [2] BLOCK  
2. 363-2441 [1] SUPPORT AS  
3. 361-8887 [1] SUPPORT AS  
4. 356-9237 [1] TUBE AS  
5. 356-9238 [1] TUBE AS  
6. 1P-3705 [4] SEAL-RECTANGULAR  
7. 453-3454 [4] WASHER-HARD (11X21X2.5-MM THK)  
8. 457-5821 M [4] BOLT (M10X1.5X35-MM)  
9. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 8T-4648 M [8] BOLT (M12X1.75X70-MM)  
11. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
12. 8T-6868 M [8] BOLT (M12X1.75X80-MM)  
  M   METRIC PART
 

#SEBP56150529
 

361-2897: LINES GP-BUCKET CYLINDER

361-2897 LINES GP-BUCKET CYLINDER
S/N BYP1-UP
PART OF 355-7245, 361-2899 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT
i03983412 SEBP5615
3612897 LINES GP-BUCKET CYLINDER Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-5708 [4] CLIP-HALF  
2. 138-5709 [2] GROMMET  
3. 338-6111 [1] TUBE AS  
4. 359-8591 [1] TUBE AS  
5. 361-8897 [2] SUPPORT AS  
6. 361-8900 [2] SUPPORT AS  
7. 1P-3706 [2] SEAL-RECTANGULAR  
8. 453-2839 M [8] BOLT (M16X2X100-MM)  
9. 453-3454 [8] WASHER-HARD (11X21X2.5-MM THK)  
10. 447-1707 M [4] BOLT (M16X2X60-MM)  
11. 457-5821 M [8] BOLT (M10X1.5X35-MM)  
12. 451-2175 [12] WASHER-HARD (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

Information:

Specifications
Boom Cylinder Lines
390D Excavator Machine System Specifications
Boom Cylinder Lines
390D Excavator Machine System Specifications
Boom Lines
390D Excavator Machine System Specifications
Boom Lines
390D Excavator Machine System Specifications

Caterpillar Parts SIS Catalog 390D :

LINES GP-BOOM
374-0032 LINES GP-BOOM
LINES GP-BOOM
338-6165 LINES GP-BOOM
LINES GP-BOOM
338-6164 LINES GP-BOOM
LINES GP-BOOM
330-2409 LINES GP-BOOM
LINES GP-AUXILIARY HYDRAULIC
352-6794 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6793 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6791 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6790 LINES GP-AUXILIARY HYDRAULIC
LINES GP-BOOM
374-0033 LINES GP-BOOM
LINES GP-BOOM
382-7063 LINES GP-BOOM
LINES GP-BOOM CYLINDER
296-7112 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
296-7112 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
296-7112 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
296-7112 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
353-9651 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
353-9652 LINES GP-BOOM CYLINDER

Truck sale:

Caterpillar 390D
 
Caterpillar 390D
- Crawler Excavators
FINNING CANADA
Caterpillar 390D, bucket, Construction
14,264 
Caterpillar 390D, bucket, Construction
- bucket
FINNING CANADA
Caterpillar 390D, schaufel, Bau-Und Bergbauausrüstung
29.311 
Caterpillar 390D, schaufel, Bau-Und Bergbauausrüstung
- bucket
FINNING CANADA
 
387,487 
Caterpillar 390D, Construction
- Crawler Excavators
EMPIRE MACHINERY
Caterpillar CATBKT390D_47, Construction
12,500 
Caterpillar CATBKT390D_47, Construction
- bucket
KELLY TRACTOR CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.