AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT S/N PCM1-UP PART OF 421-1434 CONSOLE GP-OPERATOR 320D GC


OPERATOR STATION
CONTROL GP-HYDRAULIC
HYDRAULIC SYSTEM
LINES GP-BOOM
LINES GP-CYLINDER
LINES GP-BUCKET
LINES GP-FRONT
LINES GP-HYDRAULIC

EXCAVATOR 320D GC EXCAVATOR PCM
 320D GC Excavator PCM00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP5618 320D GC PCM   (2010)

OPERATOR STATION

CONTROL GP-HYDRAULIC
LEVER GP-CONTROL
234-6613 LEVER GP-CONTROL
CONTROL & MTG GP-JOYSTICK
310-0078 CONTROL & MTG GP-JOYSTICK
CONTROL GP-PILOT OPERATED HYD
170-9497 CONTROL GP-PILOT OPERATED HYD
 

#SEBP56180280
 

234-6613: LEVER GP-CONTROL

234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N PCM1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
i02534956 SEBP5618
2346613 LEVER GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
3. 111-4799 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5998 D TUBE (0.3-M)  
4. 185-8286 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
5. 234-6615 [1] KNOB  
6. 087-4683 [2] LOCKWASHER  
7. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP56180281
 

260-8010: LINES GP-BOOM

260-8010 LINES GP-BOOM
S/N PCM1-UP
PART OF 240-3828, 240-3832 BOOM AR-1 PIECE LONG
AN ATTACHMENT
i02548250 SEBP5618
2608010 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1674 [6] CLIP  
2. 4I-1676 [6] CLIP  
3. 7Y-4868 [8] CLIP  
4. 307-5034 [1] TUBE AS  
5. 202-3855 [1] TUBE AS  
6. 202-3856 [1] TUBE AS  
7. 202-3857 [1] TUBE AS  
8. 202-3858 [1] TUBE AS  
9. 202-6996 I [1] HOSE AS  
10. 260-8315 [1] TUBE AS  
11. 260-8316 I [1] HOSE AS  
12. 1P-3703 [2] SEAL-RECTANGULAR  
13. 6V-0400 [4] FLANGE-HALF  
14. 6V-9746 [9] SEAL-O-RING  
15. 8T-4139 M [20] BOLT (M12X1.75X30-MM)  
16. 8T-4184 M [8] BOLT (M12X1.75X45-MM)  
17. 8T-4223 [28] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56180282
 

239-1699: LINES GP-BOOM CYLINDER

239-1699 LINES GP-BOOM CYLINDER
S/N PCM1-UP
PART OF 285-1354 HYDRAULIC AR
i03266884 SEBP5618
2391699 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
2. 101-7398 M [4] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
3. 108-7354 I [1] HOSE AS  
4. 124-1047 I [4] HOSE AS  
5. 124-1062 [1] SUPPORT AS  
6. 133-5828 [1] SUPPORT AS  
7. 142-7768 [1] TUBE AS  
8. 142-7769 [1] TUBE AS  
9. 322-8716 CY [1] VALVE GP-SWING CUSHION (FINE SWING)  
10. 164-5552 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  4I-7745 [1] CONNECTOR  
  6V-8398 [1] SEAL-O-RING  
11. 234-4492 [1] SUPPORT  
12. 307-4918 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  307-4919 [1] CONNECTOR  
13. 101-7404 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
14. 108-7550 [1] CLIP  
15. 148-8336 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
16. 148-8353 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9001 [1] ELBOW  
17. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
18. 148-8367 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
19. 148-8444 [1] TEE AS-SWIVEL  
  6V-8398 [2] SEAL-O-RING  
  6V-9837 [1] TEE-SWIVEL  
20. 1P-3703 [2] SEAL-RECTANGULAR  
21. 4I-1674 [2] CLIP  
22. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
23. 6V-9746 [8] SEAL-O-RING  
24. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
26. 8T-4178 M [6] BOLT (M10X1.5X90-MM)  
27. 8T-4182 M [8] BOLT (M10X1.5X45-MM)  
28. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
29. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
31. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
32. 8T-9403 [4] FLANGE-HALF  
33. 6H-3615 [1] PLUG-PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56180283
 

242-6732: LINES GP-BOOM CYLINDER

242-6732 LINES GP-BOOM CYLINDER -LH
S/N PCM1-UP
PART OF 242-6730, 242-6745, 349-4124 CYLINDER & LINES GP-BOOM
AN ATTACHMENT
i02548200 SEBP5618
2426732 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 247-8869 [1] TUBE AS  
2. 222-0126 [1] TUBE AS  
3. 095-1597 [2] SEAL-O-RING  
4. 9X-6032 M [8] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
5. 137-3709 [1] SUPPORT AS  
6. 4I-3621 [1] SUPPORT  
7. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
8. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 8T-3653 M [1] BOLT (M14X2X80-MM)  
10. 3B-4509 [1] LOCKWASHER  
11. 094-1920 [2] CLAMP  
  M   METRIC PART
 

#SEBP56180284
 

242-6737: LINES GP-BOOM CYLINDER

242-6737 LINES GP-BOOM CYLINDER -RH
S/N PCM1-UP
PART OF 242-6736, 242-6749, 349-4125 CYLINDER & LINES GP-BOOM
AN ATTACHMENT
i02548210 SEBP5618
2426737 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 247-8870 [1] TUBE AS  
2. 222-0124 [1] TUBE AS  
3. 095-1597 [2] SEAL-O-RING  
4. 9X-6032 M [8] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
5. 137-3709 [1] SUPPORT AS  
6. 4I-3621 [1] SUPPORT  
7. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
8. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 8T-3653 M [1] BOLT (M14X2X80-MM)  
10. 3B-4509 [1] LOCKWASHER  
11. 094-1920 [2] CLAMP  
  M   METRIC PART
 

#SEBP56180285
 

187-5693: LINES GP-BUCKET CYLINDER

187-5693 LINES GP-BUCKET CYLINDER
S/N PCM1-UP
PART OF 240-3839, 240-3849 STICK AR-HOE
FOR USE WITH 2.9-M (9.5-FT) STICK
AN ATTACHMENT
i02527851 SEBP5618
1875693 LINES GP-BUCKET CYLINDER Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-8785 I [2] HOSE AS  
2. 5I-4174 [1] BLOCK  
3. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
4. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-9403 [4] FLANGE-HALF  
6. 1P-3702 [2] SEAL-RECTANGULAR  
7. 1P-3703 [1] SEAL-RECTANGULAR  
8. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56180286
 

242-6757: LINES GP-BUCKET CYLINDER

242-6757 LINES GP-BUCKET CYLINDER
S/N PCM1-UP
PART OF 242-6755, 349-4133 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT
i02548299 SEBP5618
2426757 LINES GP-BUCKET CYLINDER Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
2. 095-1597 [1] SEAL-O-RING  
3. 274-2547 [1] TUBE AS  
4. 096-4412 [1] SUPPORT  
5. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
6. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 124-1034 [1] SUPPORT AS  
8. 096-4480 [1] CLAMP  
9. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
10. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP56180287
 

369-9677: LINES GP-BUCKET CYLINDER

369-9677 LINES GP-BUCKET CYLINDER
S/N PCM1-UP
PART OF 349-4133 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT
i05476154 SEBP5618
3699677 LINES GP-BUCKET CYLINDER Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
2. 095-1597 [1] SEAL-O-RING  
3. 472-0688 [1] TUBE AS  
4. 096-4412 [1] SUPPORT  
5. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
6. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 369-9678 [1] SUPPORT AS  
8. 096-4480 [1] CLAMP  
9. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
10. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP56180288
 

239-1714: LINES GP-FRONT

239-1714 LINES GP-FRONT
S/N PCM1-UP
PART OF 285-1354 HYDRAULIC AR
i02545894 SEBP5618
2391714 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-3730 [2] FLANGE-SPECIAL  
2. 101-7403 M [2] BOLT-SOCKET HEAD (M10X1.5X80-MM)  
3. 105-3477 M [8] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
4. 105-3483 M [2] BOLT-SOCKET HEAD (M10X1.5X70-MM)  
5. 113-6479 [2] FLANGE-SPECIAL  
6. 165-3185 I [1] HOSE AS  
7. 165-3190 I [1] HOSE AS  
8. 337-1182 I [1] HOSE AS  
9. 194-0174 Y [1] HOSE GP-HYDRAULIC  
10. 194-0180 Y [1] HOSE GP-HYDRAULIC  
11. 214-4511 Y [1] FITTING GP-HYDRAULIC (4-BOLT FLANGE)  
12. 236-3212 Y [1] HOSE GP-HYDRAULIC  
13. 236-3213 Y [1] HOSE GP-HYDRAULIC  
14. 289-5672 I [1] HOSE AS  
15. 255-5680 Y [1] VALVE GP-LOAD CONTROL (STICK DRIFT RED, LINE RELIEF)  
16. 255-5683 Y [1] VALVE GP-LOAD CONTROL (BOOM DRIFT RED, LINE RELIEF)  
17. 260-7910 Y [1] HOSE GP-HYDRAULIC  
18. 260-7988 I [1] HOSE AS  
19. 260-7992 I [1] HOSE AS  
20. 260-7996 I [1] HOSE AS  
21. 260-8000 I [1] HOSE AS  
22. 101-7397 M [4] BOLT-SOCKET HEAD (M12X1.75X50-MM)  
23. 101-7404 M [42] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
24. 199-1286 M [6] BOLT-SOCKET HEAD (M10X1.5X150-MM)  
25. 1P-3702 [4] SEAL-RECTANGULAR  
26. 1P-3703 [9] SEAL-RECTANGULAR  
27. 4J-5267 [10] SEAL-O-RING  
28. 4J-5268 [1] SEAL-O-RING  
29. 5K-9090 [5] SEAL-O-RING  
30. 6V-0400 [4] FLANGE-HALF  
31. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
33. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-9403 [4] FLANGE-HALF  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56180289
 

248-9846: LINES GP-HYDRAULIC OIL COOLER

248-9846 LINES GP-HYDRAULIC OIL COOLER -CONTROL VALVE, PUMP
S/N PCM1-UP
PART OF 285-1354 HYDRAULIC AR
i02990218 SEBP5618
2489846 LINES GP-HYDRAULIC OIL COOLER Parts scheme 2489846 LINES GP-HYDRAULIC OIL COOLER Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-0367 [2] CLAMP-HOSE  
2. 173-4816 [1] SUPPORT AS  
3. 179-7863 I [1] HOSE AS  
4. 179-7867 I [1] HOSE AS  
5. 196-0807 [1] PLATE  
6. 199-7394 [1] PIPE AS  
7. 199-7403 I [1] HOSE AS  
8. 227-0581 [1] HOSE  
9. 266-1037 [1] TUBE AS  
10. 266-1045 [1] TUBE AS  
11. 319-9888 [1] SUPPORT AS  
12. 297-0462 Y [1] VALVE GP-CHECK  
13. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
14. 101-7402 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
15. 148-8354 C [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9002 [1] ELBOW  
16. 148-8357 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9008 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
17. 1P-3703 [4] SEAL-RECTANGULAR  
18. 4J-0524 [3] SEAL-O-RING  
19. 4J-0527 [1] SEAL-O-RING  
20. 5P-7468 [1] CLIP (SLOT)  
21. 5P-7469 [1] CLIP (TAB)  
22. 5P-8444 [1] GROMMET (37-MM ID)  
    -OR-
  8T-7087 [1] GROMMET (34-MM ID)  
23. 6V-0400 [4] FLANGE-HALF  
24. 7G-5984 [1] CLIP (TAB)  
25. 7G-5985 [1] CLIP (SLOT)  
26. 7G-5986 [1] GROMMET  
27. 7X-2544 M [4] BOLT (M10X1.5X140-MM)  
28. 7X-7729 [2] WASHER (11X25X3-MM THK)  
29. 7Y-5247 M [1] U-BOLT (M10X1.5-THD)  
30. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
32. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
33. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
34. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
35. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
36. 8T-4223 [15] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 8T-4956 M [5] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Troubleshooting
MID 039 - CID 1129 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1129 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1129 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1130 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1130 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1130 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Caterpillar Parts SIS Catalog 320D GC :

285-1354 HYDRAULIC AR
HOSE GP-HYDRAULIC
260-7913 HOSE GP-HYDRAULIC
HOSE GP-HYDRAULIC
260-7911 HOSE GP-HYDRAULIC
260-7910 HOSE GP-HYDRAULIC
HOSE GP-HYDRAULIC
236-3215 HOSE GP-HYDRAULIC
HOSE GP-HYDRAULIC
236-3214 HOSE GP-HYDRAULIC
236-3213 HOSE GP-HYDRAULIC
236-3212 HOSE GP-HYDRAULIC
LINES GP-BOOM
260-8010 LINES GP-BOOM
LINES GP-BOOM CYLINDER
239-1699 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
242-6732 LINES GP-BOOM CYLINDER
LINES GP-BOOM CYLINDER
242-6737 LINES GP-BOOM CYLINDER
LINES GP-BUCKET CYLINDER
187-5693 LINES GP-BUCKET CYLINDER
LINES GP-BUCKET CYLINDER
242-6757 LINES GP-BUCKET CYLINDER
LINES GP-BUCKET CYLINDER
369-9677 LINES GP-BUCKET CYLINDER
LINES GP-FRONT
239-1714 LINES GP-FRONT

Truck sale:

CATERPILLAR 320DGC 2011
 
CATERPILLAR 320DGC 2011
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
CATERPILLAR 320DGC 2011
 
CATERPILLAR 320DGC 2011
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
CATERPILLAR 320DGC 2012
 
CATERPILLAR 320DGC 2012
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
CATERPILLAR 320 DGC 2010
 
CATERPILLAR 320 DGC 2010
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
 
 
CATERPILLAR 320DGC 2011
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.