363-6203 HOSE GP-HYDRAULIC -CONTROL VALVE, STICK S/N JWR162-UP PART OF 260-7869 LINES GP-FRONT 336D L

Part No	Qty	Parts name
259-5237 Y	[1]	FASTENER GP-WIRING HARNESS (HEAVY LIFT)
248-9838 Y	[1]	LINES GP-RETURN (REAR)
260-7869 Y	[1]	LINES GP-FRONT (IMPL, SWING, TRAVEL, WORK TOOL)
260-7870 Y	[1]	LINES GP-BOOM CYLINDER
248-9840 Y	[1]	LINES GP-HYDRAULIC OIL COOLER
248-9825 Y	[1]	LINES GP-PILOT (JOYSTICK, PEDALS)
307-5106 Y	[1]	LINES GP-PILOT (MAIN HYDRAULIC PUMP)
255-1659 Y	[1]	LINES GP-PILOT (HEAVY LIFT)
260-7866 Y	[1]	LINES GP-PILOT (TRAVEL)
260-7867 Y	[1]	LINES GP-PILOT (CONTROL VALVE)
307-5122 Y	[1]	LINES GP-PUMP (MAIN HYDRAULIC)
283-8322 Y	[1]	LINES GP-TRAVEL MOTOR
266-1161 Y	[1]	MOUNTING GP-MAIN CONTROL VALVE
310-9486 Y	[1]	PUMP & MTG GP-MAIN HYDRAULIC
		S/N JWR1-156
327-7263 Y	[1]	PUMP & MTG GP-MAIN HYDRAULIC
		S/N JWR157-UP
269-9757 Y	[1]	TANK & MTG GP-HYDRAULIC
285-1345 Y	[1]	VALVE GP-MAIN CONTROL (HEAVY LIFT)
Y		SEPARATE ILLUSTRATION

#SEBP56200427

482-9910: KIT-VALVE

KIT-VALVE

482-9910 KIT-VALVE
S/N JWR1-UP
****PROVIDES A NEW UPGRADE KIT (VALVE AR-CHECK & RELIEF) FOR THE BOOM LOWERING CONTROL
FOR USE WITH SPECIAL INSTRUCTIONS REHS8138 FOR INSTALLATION OF KIT
FIELD INSTALLATION

i06522879 SEBP5620

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4I-0800 I	[1]	HOSE AS
4I-0818 I	[1]	HOSE AS
7K-1181	[15]	STRAP-CABLE
087-6583 I	[1]	HOSE AS
113-6738 I	[1]	HOSE AS
133-5813	[2]	BAND-MARKER (GRAY, P)
266-0982	[1]	GUARD

		(ABOVE PARTS ARE PART OF THE 255-1855 PILOT LINES GROUP.)

3K-0360	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-9876	[1]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8363 ADAPTER ASSEMBLY.)

6V-8397	[2]	SEAL-O-RING
6V-9836	[1]	TEE-SWIVEL

		(ABOVE PARTS ARE PART OF THE 148-8433 ADAPTER ASSEMBLY.)

1P-3702	[2]	SEAL-RECTANGULAR
1P-3703	[2]	SEAL-RECTANGULAR
4J-5268	[1]	SEAL-O-RING
5K-9090	[2]	SEAL-O-RING
6V-9746	[1]	SEAL-O-RING
7M-8485	[1]	SEAL-O-RING
8T-5005 M	[4]	BOLT (M10X1.5X70-MM)
185-0488	[1]	BLOCK
207-6449	[1]	BLOCK
223-6732	[1]	TUBE AS

		(ABOVE PARTS ARE PART OF THE 255-2077 RETURN LINES GROUP.)

5K-9090	[1]	SEAL-O-RING
6V-9008	[1]	ELBOW
7M-8485	[1]	SEAL-O-RING

		(ABOVE PARTS ARE PART OF THE 148-8357 ADAPTER ASSEMBLY.)

3K-0360	[1]	SEAL-O-RING
9S-4185	[1]	PLUG (3/4-16-THD)

		(ABOVE PARTS ARE PART OF THE 148-8411 PLUG ASSEMBLY.)

124-2123	[1]	COUPLING-ORFS
124-2155	[1]	COUPLING AS

		(ABOVE PARTS ARE PACKAGED WITH 194-0354, & 111-CM 122-6883.)

124-2121	[1]	COUPLING-PERMANENT
124-2153	[1]	COUPLING

		(ABOVE PARTS ARE PACKAGED WITH 260-8086, & 119-CM 122-6882.)

432-2105	[1]	COUPLING AS
432-2111	[1]	COUPLING AS

		(ABOVE PARTS ARE PACKAGED WITH 275-1418, 82-CM 161-1818, & 85-CM 7Y-5074.)

8T-8899	[1]	ELBOW
228-7092	[1]	SEAL-O-RING

		(ABOVE PARTS ARE PART OF THE 329-5528 ELBOW ADAPTER ASSEMBLY.)

1P-3703	[2]	SEAL-RECTANGULAR
1P-3704	[2]	SEAL-RECTANGULAR
4I-9521	[2]	BAND-MARKER (RED, L1)
4I-9522	[2]	BAND-MARKER (YELLOW, L2)
4I-9525	[2]	BAND-MARKER (ORANGE, R1)
4I-9526	[2]	BAND-MARKER (WHITE, R2)
5K-9090	[2]	SEAL-O-RING
7J-9108	[2]	SEAL-O-RING
7K-1181	[22]	STRAP-CABLE
8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
8T-4139 M	[10]	BOLT (M12X1.75X30-MM)
8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
8T-4223	[20]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
108-3819 M	[8]	BOLT-SOCKET HEAD (M12X1.75X70-MM)
108-7550	[4]	CLIP
149-1738	[4]	CLIP
245-5120	[1]	SUPPORT AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
245-5122	[1]	BLOCK
263-1962 Y	[2]	VALVE GP-LOAD CONTROL (BOOM LOWERING, DRIFT REDUCTION)
270-5692 Y	[1]	VALVE GP-MANUAL (BOOM LOWER)
418-9212	[1]	TUBE AS
418-9213	[1]	TUBE AS
418-9214	[1]	PIPE AS
418-9216	[1]	PIPE AS
465-5185	[2]	SUPPORT AS
		(EACH INCLUDES)
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
465-5188	[1]	SUPPORT AS
465-5190	[1]	SUPPORT AS

		(ABOVE PARTS ARE PART OF THE 418-5071 BOOM CYLINDER LINES GROUP

3J-1907	[8]	SEAL-O-RING
6V-8397	[8]	SEAL-O-RING
6V-8636	[8]	CONNECTOR

		(ABOVE PARTS ARE PART OF THE 148-8336 ADAPTER ASSEMBLIES.)

3D-2824	[4]	SEAL-O-RING
6V-8713	[4]	CONNECTOR
7J-9108	[4]	SEAL-O-RING

		(ABOVE PARTS ARE PART OF THE 148-8341 ADAPTER ASSEMBLIES.)

3D-2824	[1]	SEAL-O-RING
6V-9007	[1]	ELBOW
6V-9746	[1]	SEAL-O-RING

		(ABOVE PARTS ARE PART OF THE 148-8347 ADAPTER ASSEMBLY.)

3J-7354	[2]	SEAL-O-RING
6V-8397	[2]	SEAL-O-RING
6V-9200	[2]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8361 ADAPTER ASSEMBLIES.)

3J-1907	[4]	SEAL-O-RING
6V-8397	[4]	SEAL-O-RING
6V-8724	[4]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8378 ADAPTER ASSEMBLIES.)

3K-0360	[1]	SEAL-O-RING
9S-4185	[1]	PLUG (3/4-16-THD)

		(ABOVE PARTS ARE PART OF THE 148-8411 PLUG ASSEMBLY.)

124-2114	[4]	COUPLING

		(ABOVE PARTS ARE PACKAGED WITH 2-245-5110, 442-CM 122-6879, & 530-CM 7I-7439.)

124-2114	[4]	COUPLING

		(ABOVE PARTS ARE PACKAGED WITH 2-245-5113, 486-CM 122-6879, & 426-CM 7I-7439.)

323-6157	[4]	COUPLING AS-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 2-245-5116, 300-CM 161-1815, & 426-CM 7I-7439.)

124-2119	[1]	COUPLING-PERMANENT
124-2150	[1]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 2-260-8278, 105-CM 122-6881, & 123-CM 7I-1024.)

I		REFER TO HYDRAULIC INFORMATION SYSTEM
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP56200428

482-9911: KIT-VALVE

KIT-VALVE

482-9911 KIT-VALVE
S/N JWR1-UP
+TO PROVIDE A NEW UPGRADE KIT (VALVE AR-CHECK & RELIEF) FOR BOOM LOWERING CONTROL
FOR USE WITH SPECIAL INSTRUCTIONS REHS8138 FOR INSTALLATION OF KIT
FIELD INSTALLATION

i06523095 SEBP5620

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1P-3705	[2]	SEAL-RECTANGULAR
6V-8397	[2]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-6868 M	[4]	BOLT (M12X1.75X80-MM)
093-1290	[1]	CLAMP
093-1294	[2]	CLAMP
108-1782 M	[4]	BOLT-SOCKET HEAD (M12X1.75X90-MM)
202-6752	[1]	SUPPORT AS
216-6515	[2]	CLIP
259-7692 Y	[1]	VALVE GP-LOAD CONTROL (DRIFT REDUCTION, VAR ADJ BOOM)
268-7208	[1]	TUBE AS
268-7209	[1]	TUBE AS
268-7211	[1]	TUBE AS
268-7213	[1]	TUBE AS
447-1708 M	[2]	BOLT (M16X2X80-MM)
447-1711 M	[2]	BOLT (M16X2X50-MM)
451-2175	[4]	WASHER-HARD (17.5X30X3.5-MM THK)
465-5193	[1]	SUPPORT AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
465-5196	[1]	SUPPORT AS

		(ABOVE PARTS ARE PART OF THE 237-3199 STICK CYLINDER LINES GROUP (STICK LOWERING CONTROL.)

3D-2824	[1]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
6V-8633	[1]	CONNECTOR

		(ABOVE PARTS ARE PART OF THE 148-8328 ADAPTER ASSEMBLY.)

3J-1907	[2]	SEAL-O-RING
4J-5477	[2]	SEAL-O-RING
6V-8627	[2]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8368 ADAPTER ASSEMBLIES.)

5Q-4212	[2]	CLIP
6V-8398	[2]	SEAL-O-RING
6V-9168	[2]	NUT (11/16-16-THD)
7K-1181	[5]	STRAP-CABLE
8T-4139 M	[8]	BOLT (M12X1.75X30-MM)
8T-4223	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4244 M	[8]	NUT (M12X1.75-THD)
8T-5001 M	[2]	BOLT (M12X1.75X130-MM)
179-5235	[8]	CLIP
179-5254	[2]	PLATE
193-6662	[1]	PLATE
212-5419 I	[2]	HOSE AS
282-5718	[1]	TUBE AS
356-8170	[1]	PLATE
447-1704 M	[2]	BOLT (M16X2X90-MM)
451-2175	[2]	WASHER-HARD (17.5X30X3.5-MM THK)

		(ABOVE PARTS ARE PART OF THE 237-3200 BOOM LINES GROUP.)

149-8476	[4]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 5I-4393, & 83-CM 205-3719.)

6V-8397	[4]	SEAL-O-RING
6V-8994	[2]	UNION (STRAIGHT)

		(ABOVE PARTS ARE PART OF THE 149-5452 ADAPTER ASSEMBLIES.)

4I-9523	[4]	BAND-MARKER (BLUE, L3)
7K-1181	[9]	STRAP-CABLE
133-5813	[2]	BAND-MARKER (GRAY, P)
201-9379	[1]	BLOCK

		(ABOVE PARTS ARE PART OF THE 255-1854 PILOT LINES GROUP.)

149-8474	[1]	COUPLING-PERMANENT
149-8501	[1]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 269-9944, 349-CM 205-3717, & 177-CM 7I-3717.)

149-8474	[1]	COUPLING-PERMANENT
149-8501	[1]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 285-2592, 190-CM 205-3717, & 218-CM 7I-7439.)

3J-1907	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-8636	[1]	CONNECTOR

		(ABOVE PARTS ARE PART OF THE 148-8336 ADAPTER ASSEMBLY.)

3K-0360	[1]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
6V-8625	[1]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8364 ADAPTER ASSEMBLY.)

3J-1907	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-8724	[1]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8378 ADAPTER ASSEMBLY.)

6V-8397	[4]	SEAL-O-RING
6V-9836	[2]	TEE-SWIVEL

		(ABOVE PARTS ARE PART OF THE 148-8433 ADAPTER ASSEMBLIES.)

149-8476	[2]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 116-CM 205-3719 & 156-CM 7I-7439.)

I		REFER TO HYDRAULIC INFORMATION SYSTEM
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP56200429

483-5893: KIT-VALVE

KIT-VALVE

483-5893 KIT-VALVE
S/N JWR1-UP
****PROVIDE A NEW UPGRADE KIT (VALVE AR-CHECK & RELIEF) FOR BOOM LOWERING CONTROL
FOR USE WITH SPECIAL INSTRUCTIONS REHS8138 FOR INSTALLATION OF KIT
FIELD INSTALLATION

i06521861 SEBP5620

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1P-3705	[2]	SEAL-RECTANGULAR
6V-8397	[2]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-6868 M	[4]	BOLT (M12X1.75X80-MM)
093-1290	[1]	CLAMP
093-1294	[2]	CLAMP
108-1782 M	[4]	BOLT-SOCKET HEAD (M12X1.75X90-MM)
202-6752	[1]	SUPPORT AS
216-6515	[2]	CLIP
259-7692 Y	[1]	VALVE GP-LOAD CONTROL (DRIFT REDUCTION, VAR ADJ BOOM)
268-7208	[1]	TUBE AS
268-7209	[1]	TUBE AS
268-7211	[1]	TUBE AS
268-7213	[1]	TUBE AS
447-1708 M	[2]	BOLT (M16X2X80-MM)
447-1711 M	[2]	BOLT (M16X2X50-MM)
451-2175	[4]	WASHER-HARD (17.5X30X3.5-MM THK)
465-5193	[1]	SUPPORT AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
465-5196	[1]	SUPPORT AS
465-5193	[1]	SUPPORT AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)

		(ABOVE PARTS ARE PART OF THE 237-3199 STICK CYLINDER LINES GROUP (STICK LOWERING CONTROL.)

3D-2824	[1]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
6V-8633	[1]	CONNECTOR

		(ABOVE PARTS ARE PART OF THE 148-8328 ADAPTER ASSEMBLY.)

3J-1907	[2]	SEAL-O-RING
4J-5477	[2]	SEAL-O-RING
6V-8627	[2]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8368 ADAPTER ASSEMBLIES.)

5Q-4212	[2]	CLIP
6V-8398	[2]	SEAL-O-RING
6V-9168	[2]	NUT (11/16-16-THD)
7K-1181	[4]	STRAP-CABLE
8T-4139 M	[6]	BOLT (M12X1.75X30-MM)
8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4244 M	[6]	NUT (M12X1.75-THD)
8T-5001 M	[2]	BOLT (M12X1.75X130-MM)
143-4294 I	[2]	HOSE AS
179-5235	[6]	CLIP
179-5254	[2]	PLATE
193-6662	[1]	PLATE
282-5722	[1]	TUBE AS
356-8170	[1]	PLATE
447-1704 M	[2]	BOLT (M16X2X90-MM)
451-2175	[2]	WASHER-HARD (17.5X30X3.5-MM THK)

		(ABOVE PARTS ARE PART OF THE 237-3202 BOOM LINES GROUP.)

149-8476	[2]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 5I-4393, & 83-CM 205-3719.)

6V-8397	[4]	SEAL-O-RING
6V-8994	[2]	UNION (STRAIGHT)

		(ABOVE PARTS ARE PART OF THE 149-5452 ADAPTER ASSEMBLY.)

4I-9523	[4]	BAND-MARKER (BLUE, L3)
7K-1181	[9]	STRAP-CABLE
133-5813	[2]	BAND-MARKER (GRAY, P)
201-9379	[1]	BLOCK

		(ABOVE PARTS ARE PART OF THE 255-1854 PILOT LINES GROUP.)

3J-1907	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-8636	[1]	CONNECTOR

		(ABOVE PARTS ARE PART OF THE 148-8336 ADAPTER ASSEMBLY.)

3K-0360	[1]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
6V-8625	[1]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8364 ADAPTER ASSEMBLY.)

3J-1907	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-8724	[1]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8378 ADAPTER ASSEMBLY.)

6V-8397	[4]	SEAL-O-RING
6V-9836	[2]	TEE-SWIVEL

		(ABOVE PARTS ARE PART OF THE 148-8433 ADAPTER ASSEMBLIES.)

149-8474	[1]	COUPLING-PERMANENT
149-8501	[1]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 269-9944, 349-CM 205-3717, & 177-CM 7I-7439.)

149-8474	[1]	COUPLING-PERMANENT
149-8501	[1]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 285-2592, 190-CM 205-3717, & 218-CM 7I-7439.)

149-8476	[2]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 116-CM 205-3719, & 156-CM 7I-7439 & 437-0481.)

I		REFER TO HYDRAULIC INFORMATION SYSTEM
M		METRIC PART
Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC

Special Instruction

New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}

O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}

Technical Information Bulletin

Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}

The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}

Specifications

Bucket Cylinder Lines
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Sensor Lines (Overload Warning)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Bucket Cylinder Lines
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Pilot Lines - Stick Lowering Control
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Stick Cylinder Lines
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Pilot Lines
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Pilot Lines - Main Pump
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Pilot Lines - Joystick and Pedals
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Pilot Lines - Third Pedal and Pilot Valve
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Pilot Lines - Control Valve
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Pilot Lines
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Stick Cylinder Lines
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Return and Oil Filter Lines
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Pilot Lines
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Pilot Lines - Travel
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Bucket Cylinder Lines
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Tool Operating Manual

358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}

Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}

Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}

Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}

Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}

Reuse And Salvage Guidelines

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

Contamination Control Guidelines

Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}

Testing and Adjusting

Accumulator (Pilot) - Test and Charge
330D and 336D Excavators Hydraulic System

Service Magazine

Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}

Caterpillar Parts SIS Catalog 336D L :

363-6202 HOSE GP-HYDRAULIC

363-6201 HOSE GP-HYDRAULIC

363-6200 HOSE GP-HYDRAULIC

194-0182 HOSE GP-HYDRAULIC

194-0181 HOSE GP-HYDRAULIC

194-0180 HOSE GP-HYDRAULIC

194-0179 HOSE GP-HYDRAULIC

194-0178 HOSE GP-HYDRAULIC

363-6204 HOSE GP-HYDRAULIC

363-6205 HOSE GP-HYDRAULIC

363-6206 HOSE GP-HYDRAULIC

363-6207 HOSE GP-HYDRAULIC

363-6208 HOSE GP-HYDRAULIC

283-6675 HYDRAULIC AR

482-9910 KIT-VALVE

482-9911 KIT-VALVE

Truck sale:

Caterpillar 336D L
- Crawler Excavators
GREGORY POOLE EQUIPMENT CO.

74,767

Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
WILLIAM ADAMS PTY. LTD.

31,260

Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
SIME DARBY INDUSTRIAL SDN BHD

119,059

Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
EMPIRE MACHINERY

57,256

Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
WESTRAC PTY. LTD. (NSW)