349-1892 HYDRAULIC AR S/N GAC1-UP PART OF 338-7871 COMMON AR ALSO AN ATTACHMENT 312E EXCAVATOR

Part No	Qty	Parts name
353-0741 Y	[1]	LINES GP-BOOM CYLINDER
		S/N GAC1-339
428-8234 Y	[1]	LINES GP-CYLINDER
		S/N GAC340-UP
353-0740 Y	[1]	LINES GP-CONTROL (REAR)
353-0742 Y	[1]	LINES GP-FRONT
		S/N GAC1-339
396-3556 Y	[1]	LINES GP-FRONT
		S/N GAC340-UP
428-8235 Y	[1]	LINES GP-FRONT
		S/N GAC340-UP
353-0754 Y	[1]	LINES GP-HYDRAULIC OIL COOLER
353-0744 Y	[1]	LINES GP-PILOT (CAB)
353-0745 Y	[1]	LINES GP-PILOT (JOYSTICK, MAIN CONTROL VALVE)
353-0747 Y	[1]	LINES GP-PILOT (PUMP)
353-0746 Y	[1]	LINES GP-PILOT (CONTROL VALVE)
		S/N GAC1-339
396-3561 Y	[1]	LINES GP-PILOT (BLADE)
		S/N GAC340-UP
428-8238 Y	[1]	LINES GP-PILOT (CONTROL VALVE)
		S/N GAC340-UP
353-0743 Y	[1]	LINES GP-PUMP
353-0748 Y	[1]	LINES GP-TRAVEL MOTOR
353-0750 Y	[1]	MOUNTING GP-MAIN CONTROL VALVE
349-4068 Y	[1]	PUMP & MTG GP-MAIN HYDRAULIC
353-0751 Y	[1]	TANK & MTG GP-HYDRAULIC
		S/N GAC1-339
441-6855 Y	[1]	TANK & MTG GP-HYDRAULIC
		S/N GAC340-UP
Y		SEPARATE ILLUSTRATION

#SEBP56770671

391-5263: KIT-AUXILIARY LINES

KIT-AUXILIARY LINES

391-5263 KIT-AUXILIARY LINES -FRONT
S/N GAC1-UP
FOR USE WITH @@@@@391-5264@@@@@
AN ATTACHMENT

i06126145 SEBP5677

For full view, you need register

Parts for your 312E EXCAVATOR:

Part No	Qty	Parts name
	[2]	PLATE

		(ABOVE PARTS ARE PART OF THE 350-6563 BOOM AS)

4I-0507	[4]	PLATE
	[2]	PLATE

		(ABOVE PARTS ARE PART OF THE 357-5663 STICK AS-HOE)

372-9665 Y	[1]	LINES GP-AUXILIARY HYDRAULIC (BOOM, HIGH PRESSURE)
374-0071 Y	[1]	LINES GP-AUXILIARY HYDRAULIC (STICK, HIGH PRESSURE)
316-3791 Y	[1]	SUPPORT GP-LINES
Y		SEPARATE ILLUSTRATION

#SEBP56770672

391-5264: KIT-AUXILIARY LINES

KIT-AUXILIARY LINES

391-5264 KIT-AUXILIARY LINES -FRONT
S/N GAC1-UP
FOR USE WITH @@@@@391-5263@@@@@
AN ATTACHMENT

i06126131 SEBP5677

For full view, you need register

Parts for your 312E EXCAVATOR:

Part No	Qty	Parts name
323-7631 Y	[1]	CONTROL GP-HYDRAULIC PEDAL (LH)
323-7779 Y	[1]	CONTROL GP-HYDRAULIC PEDAL (RH)
Y	[1]	FILM GP (OPERATOR CONTROLS, NOTICE)
353-0759 Y	[1]	LINES GP-FRONT (CMB FCTN, WITHOUT VALVE)
353-0760 Y	[1]	LINES GP-FRONT (VALVE MOUNTING)
353-0761 Y	[1]	LINES GP-PILOT (CMB FCTN, HYD CONT, ELEC RLF)
353-0762 Y	[1]	LINES GP-PILOT (CMB FCTN, HYD CONT, ELEC RLF)
327-9961 Y	[1]	WIRING GP-CAB (CMB FCTN, 1-WAY FLOW, HAMMER)
350-8163 Y	[1]	WIRING GP-CHASSIS

		(ABOVE PARTS ARE PART OF THE 349-1896 AUXILIARY CONTROL AR)

358-7384 Y	[1]	LINES GP-PILOT (PUMP)
358-7386 Y	[1]	LINES GP-PILOT (SWING PRIORITY)
358-7388 Y	[1]	LINES GP-PILOT (TOOL CONTROL SYSTEM)
270-5988 Y	[1]	VALVE GP-CONTROL (AUXILIARY)
350-8451 Y	[1]	WIRING GP-CHASSIS (NEGATIVE FLOW CONTROL, AUX)

		(ABOVE PARTS ARE PART OF THE 349-2003 MAIN CONTROL VALVE AR)

330-2033 M	[5]	BOLT (M14X2X105-MM)

M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP56770673

343-8342: KIT-HYDRAULIC LINES

KIT-HYDRAULIC LINES

343-8342 KIT-HYDRAULIC LINES -QUICK COUPLER
S/N GAC1-UP
PART OF 450-9741 CONTROL AR-COUPLER
AN ATTACHMENT

i03947529 SEBP5677

3438342 KIT-HYDRAULIC LINES Parts scheme

For full view, you need register

Parts for your 312E EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	4I-9521	[4]	BAND-MARKER (RED, L1)
2.	4I-9522	[4]	BAND-MARKER (YELLOW, L2)
3.	4V-0611	[8]	CLAMP
4.	4V-0612	[4]	PLATE
5.	4V-0969	[4]	PLATE AS
6.	7K-1181	[20]	STRAP-CABLE
7.	196-9994	[3]	UNION AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8736	[1]	UNION
8.	343-8343 I	[2]	HOSE AS
9.	344-6276 I	[2]	HOSE AS
10.	323-6157	[2]	COUPLING AS-PERMANENT
11.	164-5570	[5]	UNION AS
			(EACH INCLUDES)
	6V-8397	[2]	SEAL-O-RING
	6V-8730	[1]	UNION (FACE SEAL)
12.	1B-9575	[4]	BOLT (5/16-18X1.56-IN)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP56770674

323-0744: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

323-0744 LINES GP-AUXILIARY HYDRAULIC -STICK, MEDIUM PRESS, DIRECT RETURN
S/N GAC1-UP
AN ATTACHMENT

i04439602 SEBP5677

3230744 LINES GP-AUXILIARY HYDRAULIC Parts scheme

For full view, you need register

Parts for your 312E EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	173-8093 Y	[3]	VALVE AS-MANUAL
2.	323-0745	[1]	SUPPORT AS
3.	323-0746	[1]	SUPPORT AS
4.	6V-8337 M	[2]	BOLT-SOCKET HEAD (M8X1.25X35-MM)
5.	7I-8935 M	[2]	BOLT-SOCKET HEAD (M8X1.25X75-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56770675

372-9665: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

372-9665 LINES GP-AUXILIARY HYDRAULIC -BOOM, HIGH PRESSURE
S/N GAC1-UP
PART OF 391-5263 KIT-AUXILIARY LINES, 381-1248, 381-1250 OPTION AR-HYDRAULIC
AN ATTACHMENT

i04500212 SEBP5677

3729665 LINES GP-AUXILIARY HYDRAULIC Parts scheme

For full view, you need register

Parts for your 312E EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	153-8798	[2]	PLATE
2.	321-0276 I	[1]	HOSE AS
3.	321-0280 I	[1]	HOSE AS
4.	366-0785 J	[1]	TUBE GP-HYDRAULIC (BOOM)
4A.	6V-9746 L	[1]	SEAL-O-RING
5.	366-0790 J	[1]	TUBE GP-HYDRAULIC (BOOM)
5A.	1P-3703 L	[1]	SEAL-RECTANGULAR
5B.	8T-4139 LM	[4]	BOLT (M12X1.75X30-MM)
6.	1P-3703	[2]	SEAL-RECTANGULAR
7.	6V-0400	[4]	FLANGE-HALF
8.	6V-9746	[2]	SEAL-O-RING
9.	7Y-3732	[8]	CLIP
10.	7Y-4868	[8]	CLIP
11.	8T-4184 M	[16]	BOLT (M12X1.75X45-MM)
12.	8T-4223	[28]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	8T-4956 M	[12]	BOLT (M12X1.75X35-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN
	L		PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN
	M		METRIC PART

#SEBP56770676

372-9666: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

372-9666 LINES GP-AUXILIARY HYDRAULIC -BOOM, MEDIUM PRESSURE
S/N GAC1-UP
PART OF 381-1252, 381-1254 OPTION AR-HYDRAULIC
AN ATTACHMENT

i04500114 SEBP5677

3729666 LINES GP-AUXILIARY HYDRAULIC Parts scheme

For full view, you need register

Parts for your 312E EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	093-1295	[1]	CLAMP
2.	149-1738	[5]	CLIP
3.	153-8867	[4]	CLIP
4.	193-6606	[2]	PLATE
5.	247-9294	[2]	SUPPORT AS
6.	282-5530	[1]	TUBE AS
7.	372-9700	[1]	TUBE AS
8.	372-9701	[1]	TUBE AS
9.	372-9702	[1]	TUBE AS
10.	372-9709	[1]	CLIP AS
11.	372-9710	[1]	CLIP AS
12.	093-1291	[2]	CLAMP
13.	096-9986 M	[1]	BOLT (M12X1.75X55-MM)
14.	6V-8398	[4]	SEAL-O-RING
15.	7J-9108	[2]	SEAL-O-RING
16.	7X-2549 M	[4]	BOLT (M12X1.75X100-MM)
17.	7Y-4868	[1]	CLIP
18.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
19.	8T-4139 M	[8]	BOLT (M12X1.75X30-MM)
20.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
21.	8T-4223	[13]	WASHER-HARD (13.5X25.5X3-MM THK)
22.	8T-4184 JM	[4]	BOLT (M12X1.75X45-MM)
23.	8T-4223 J	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
24.	8T-4244 JM	[4]	NUT (M12X1.75-THD)
	J		WHEN USED WITHOUT AUXILIARY HYDRAULIC LINES GROUP (HIGH PRESSURE)
	M		METRIC PART

#SEBP56770677

372-9668: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

372-9668 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N GAC1-UP
PART OF 381-1250, 396-2664 OPTION AR-HYDRAULIC
FOR USE WITH 3-M (9.8-FT) STICK
AN ATTACHMENT

i04500089 SEBP5677

3729668 LINES GP-AUXILIARY HYDRAULIC Parts scheme

For full view, you need register

Parts for your 312E EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	101-7403 M	[4]	BOLT-SOCKET HEAD (M10X1.5X80-MM)
2.	241-5149 I	[1]	HOSE AS
3.	087-6643 I	[1]	HOSE AS
4.	282-5894 Y	[2]	VALVE GP-MANUAL (AUXILIARY, SHUTOFF)
5.	288-7688	[1]	TUBE AS
6.	288-7689	[1]	TUBE AS
7.	288-7690	[2]	CLIP AS
8.	288-7691	[2]	CLIP AS
9.	1P-3703	[4]	SEAL-RECTANGULAR
10.	6V-0400	[4]	FLANGE-HALF
11.	6V-9746	[1]	SEAL-O-RING
12.	7Y-3732	[2]	CLIP
13.	7Y-4868	[2]	CLIP
14.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
15.	8T-4184 M	[8]	BOLT (M12X1.75X45-MM)
16.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
17.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
19.	8T-4910 M	[8]	BOLT (M12X1.75X60-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56770678

372-9807: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

372-9807 LINES GP-AUXILIARY HYDRAULIC -STICK, MEDIUM PRESSURE
S/N GAC1-UP
PART OF 381-1254, 396-2668 OPTION AR-HYDRAULIC
FOR USE WITH 3-M (9.8-FT) STICK
AN ATTACHMENT

i04500010 SEBP5677

3729807 LINES GP-AUXILIARY HYDRAULIC Parts scheme

For full view, you need register

Parts for your 312E EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	6C-6760	[2]	MANIFOLD
2.	149-1738	[8]	CLIP
3.	250-1440	[2]	ADAPTER AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	7X-3164	[1]	ADAPTER-SWIVEL
4.	288-7693	[2]	PLATE
5.	372-9754	[2]	SUPPORT AS
6.	372-9756	[2]	SUPPORT AS
7.	372-9808	[2]	TUBE AS
8.	372-9809 I	[2]	HOSE AS
9.	105-3479 M	[4]	BOLT-SOCKET HEAD (M10X1.5X90-MM)
10.	6V-8398	[4]	SEAL-O-RING
11.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
12.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
14.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
15.	8T-4956 M	[8]	BOLT (M12X1.75X35-MM)
16.	8T-4121 J	[4]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4136 JM	[4]	BOLT (M10X1.5X25-MM)
18.	8T-4192 JM	[8]	BOLT (M12X1.75X25-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		WHEN USED WITHOUT HIGH PRESSURE LINES
	M		METRIC PART

#SEBP56770679

372-9829: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

372-9829 LINES GP-AUXILIARY HYDRAULIC -STICK, MEDIUM PRESSURE
S/N GAC1-UP
PART OF 381-1252 OPTION AR-HYDRAULIC
FOR USE WITH 2.5-M (8.2-FT) STICK
AN ATTACHMENT

i04499976 SEBP5677

3729829 LINES GP-AUXILIARY HYDRAULIC Parts scheme

For full view, you need register

Parts for your 312E EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	6C-6760	[2]	MANIFOLD
2.	105-3479 M	[4]	BOLT-SOCKET HEAD (M10X1.5X90-MM)
3.	149-1738	[8]	CLIP
4.	250-1440	[2]	ADAPTER AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	7X-3164	[1]	ADAPTER-SWIVEL
5.	288-7693	[2]	PLATE
6.	372-9754	[2]	SUPPORT AS
7.	372-9756	[2]	SUPPORT AS
8.	372-9830 I	[2]	HOSE AS
9.	372-9833	[2]	TUBE AS
10.	6V-8398	[4]	SEAL-O-RING
11.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
12.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
14.	8T-4956 M	[8]	BOLT (M12X1.75X35-MM)
15.	8T-7971	[8]	WASHER-HARD (13.5X25.5X5-MM THK)
16.	8T-4121 J	[4]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4136 JM	[4]	BOLT (M10X1.5X25-MM)
18.	8T-4192 JM	[8]	BOLT (M12X1.75X25-MM)
19.	8T-4223 J	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		WHEN USED WITHOUT HIGH PRESSURE LINES
	M		METRIC PART