LUBRICATION SYSTEM
PUMP GP-ENGINE OILCOOLING SYSTEM
COOLER GPFAN GP
LINES GP-COOLING
PUMP GP-WATER
RADIATOR GP
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL
#SEBP56930060
277-4262: PUMP GP-ENGINE OIL
For full view, you need register
#SEBP56930061
326-7401: COOLER GP-ENGINE OIL
326-7401 COOLER GP-ENGINE OIL
S/N C6E30000-UP
PART OF 380-7939 COOLER GP-ENGINE OIL
S/N C6E30000-UP
PART OF 380-7939 COOLER GP-ENGINE OIL
For full view, you need register
#SEBP56930062
380-7939: COOLER GP-ENGINE OIL
380-7939 COOLER GP-ENGINE OIL
S/N C6E30000-UP
PART OF 378-1549 ENGINE AR-PRIMARY
S/N C6E30000-UP
PART OF 378-1549 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3D-2824 | [1] | SEAL-O-RING | |
| 2. | 6I-0217 M | [10] | BOLT (M8X1.25X20-MM) | |
| 3. | 6I-4793 M | [7] | BOLT (M8X1.25X50-MM) | |
| 4. | 7M-8485 | [1] | SEAL-O-RING | |
| 5. | 8J-4645 | [1] | PLUG (STRAIGHT THREAD O-RING) | |
| 6. | 153-5294 | [1] | PLUG | |
| 7. | 225-7944 | [3] | GASKET | |
| 8. | 232-3751 | [2] | PLATE | |
| 9. | 277-2537 | [1] | PLATE | |
| 10. | 277-2538 | [1] | GASKET | |
| 11. | 326-7401 Y | [1] | COOLER GP-ENGINE OIL | |
| 12. | 340-4212 | [1] | ADAPTER | |
| 13. | 6I-0455 M | [4] | BOLT (M8X1.25X55-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56930063
369-2257: FAN AR-SUCTION
For full view, you need register
#SEBP56930064
369-2248: FAN GP-SUCTION
For full view, you need register
Parts for your 323D L EXCAVATOR:
#SEBP56930065
369-2246: LINES GP-COOLING
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4985 | [1] | CLAMP-HOSE | |
| 2. | 8T-6703 | [1] | CLAMP-HOSE | |
| 3. | 144-0367 | [8] | CLAMP-HOSE | |
| 4. | 369-2259 | [1] | HOSE (AFTERCOOLER, HIGH TEMPERATURE) | |
| 5. | 369-2260 | [1] | PIPE AS (AFTERCOOLER) | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 369-2263 | [1] | HOSE (AFTERCOOLER, HIGH TEMPERATURE) | |
| 7. | 369-2264 | [1] | HOSE (AFTERCOOLER, LOW TEMPERATURE) | |
| 8. | 369-2265 | [1] | PIPE AS | |
| 7T-1099 | [1] | LINK | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 369-2267 | [1] | HOSE (LOW TEMPERATURE AFTERCOOLER) | |
| 10. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 11. | 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 12. | 8T-4200 M | [8] | BOLT (M8X1.25X16-MM) | |
| 13. | 3E-6600 E | SEAL (8-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP56930066
277-2939: PUMP GP-WATER
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 322-9662 C | [1] | PUMP GP-WATER | |
| 1A. | 225-8019 | [1] | GASKET | |
| 2. | 6I-0254 M | [2] | BOLT (M8X1.25X30-MM) | |
| 3. | 113-8129 M | [7] | BOLT (M8X1.25X75-MM) | |
| 4. | 277-2925 | [1] | CONNECTION AS | |
| 4A. | 225-7738 | [1] | SEAL-O-RING | |
| 4B. | 277-2923 | [1] | GASKET | |
| 5. | 6I-0217 M | [2] | BOLT (M8X1.25X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP56930067
277-2939: PUMP GP-WATER
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 485-4894 CJ | [1] | PUMP GP-WATER | |
| 278-3242 | [3] | BOLT-FLANGE HEAD (M8X1.25X18-MM) | ||
| 374-4419 J | [1] | GASKET | ||
| 2. | 6I-0254 M | [2] | BOLT (M8X1.25X30-MM) | |
| 3. | 113-8129 M | [2] | BOLT (M8X1.25X75-MM) | |
| 4. | 277-2925 | [1] | CONNECTION AS | |
| 225-7738 | [1] | SEAL-O-RING | ||
| 277-2923 | [1] | GASKET | ||
| 5. | 6I-0217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 6. | 6I-0839 M | [5] | BOLT (M8X1.25X70-MM) | |
| 485-4895 BFJ | [1] | PUMP GP-WATER | ||
| 225-8019 BFJ | [1] | GASKET | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| J | PARTS MARKED J SERVICE PARTS MARKED J | |||
| M | METRIC PART | |||
#SEBP56930068
369-2249: RADIATOR & HYD OIL COOLER GP
369-2249 RADIATOR & HYD OIL COOLER GP
S/N NZF1-UP
PART OF 374-6005 INSTALLATION AR-ENGINE
S/N NZF1-UP
PART OF 374-6005 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 5P-4961 | [2] | CLAMP-HOSE | |
| 3. | 7I-2673 | [1] | STRAP-CABLE | |
| 4. | 7K-1181 | [1] | STRAP-CABLE | |
| 5. | 8T-6703 | [6] | CLAMP-HOSE | |
| 6. | 095-1390 | [2] | CLAMP-HOSE | |
| 7. | 096-4035 | [3] | CLIP | |
| 8. | 171-9077 | [1] | BAND | |
| 9. | 178-6450 | [4] | SPACER (17X35X30-MM THK) | |
| 10. | 305-7664 | [1] | BRACKET AS | |
| 11. | 245-9191 | [1] | PLATE AS | |
| 12. | 245-9205 | [1] | TANK AS-COOLANT (RECOVERY) | |
| 171-3369 | [1] | CAP AS (COOLANT RECOVERY) | ||
| 13. | 332-5856 | [4] | SPACER (10.5X25.4X16-MM) | |
| 14. | 338-7728 | [1] | CORE AS-FUEL COOLER | |
| 15. | 417-9090 | [1] | GUARD AS (UPPER) | |
| 16. | 375-5700 | [1] | HOSE-RADIATOR (UPPER) | |
| 17. | 369-2271 | [1] | HOSE-RADIATOR (LOWER) | |
| 18. | 369-2272 | [1] | HOSE-RADIATOR (LOWER) | |
| 19. | 369-2273 | [1] | TUBE AS-RADIATOR | |
| 20. | 399-7534 | [1] | LINER | |
| 21. | 369-2277 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 22. | 369-2278 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 23. | 421-7587 | [1] | TANK GP-COOLANT | |
| 360-9274 | [1] | CAP-RADIATOR | ||
| 24. | 375-5657 | [1] | HOSE-WATER | |
| 25. | 378-6176 Y | [1] | RADIATOR & HYD OIL COOLER GP | |
| 26. | 3P-9847 | [1] | CLIP | |
| 27. | 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 28. | 7D-7233 | [3] | CLIP (LOOP) | |
| 29. | 7X-2537 M | [4] | BOLT (M8X1.25X35-MM) | |
| 30. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 31. | 7X-7729 | [14] | WASHER (11X25X3-MM THK) | |
| 32. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 33. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 34. | 8T-4137 M | [16] | BOLT (M10X1.5X20-MM) | |
| 35. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 36. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 37. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 38. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 39. | 5P-1420 E | HOSE (41-CM) | ||
| 40. | 7Y-1976 E | HOSE-WATER (215-CM) | ||
| 40A. | 7Y-1976 E | HOSE-WATER (38-CM) | ||
| 41. | 5P-9909 D | SEAL (0.2-M) | ||
| 42. | 5P-5649 D | SEAL-BULK (0.7-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56930069
378-6176: RADIATOR & HYD OIL COOLER GP
378-6176 RADIATOR & HYD OIL COOLER GP
S/N NZF1-UP
PART OF 369-2249 RADIATOR & HYD OIL COOLER GP
Type 1
S/N NZF1-UP
PART OF 369-2249 RADIATOR & HYD OIL COOLER GP
Type 1
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-8159 | [4] | PIN AS | |
| 2. | 312-8338 | [1] | CORE AS-OIL COOLER (HYDRAULIC) | |
| 3. | 313-3762 | [2] | CUSHION-RUBBER | |
| 4. | 313-3763 | [1] | SCREEN AS (RADIATOR) | |
| 5. | 313-3764 | [1] | SCREEN AS (OIL COOLER) | |
| 6. | 313-3766 | [2] | SLEEVE | |
| 7. | 375-2985 | [1] | PLATE AS | |
| 8. | 313-3769 | [2] | CUSHION-RUBBER | |
| 9. | 314-6506 | [2] | CUSHION-RUBBER | |
| 10. | 314-6509 | [2] | WASHER (11X34X3-MM THK) | |
| 11. | 314-6510 | [2] | PIN | |
| 13. | 336-4591 | [1] | BRACKET AS | |
| 5C-7261 M | [4] | NUT (M8X1.25-THD) | ||
| 14. | 374-5000 | [1] | PLATE AS | |
| 15. | 350-7501 | [1] | ADAPTER | |
| 16. | 352-7775 | [2] | SEAL | |
| 18. | 376-6721 | [1] | PLUG | |
| 19. | 377-5000 | [2] | SEAL | |
| 20. | 377-5001 | [4] | SEAL | |
| 21. | 377-5002 | [1] | SEAL | |
| 22. | 377-5003 | [2] | SEAL | |
| 23. | 377-5004 | [1] | SEAL | |
| 24. | 377-5005 | [2] | SEAL | |
| 25. | 377-5006 | [2] | SEAL | |
| 26. | 378-6177 | [1] | FRAME AS | |
| 27. | 433-1671 | [1] | CORE AS-RADIATOR | |
| 332-4192 | [1] | SEAL-O-RING | ||
| 355-0468 | [1] | PLUG-DRAIN | ||
| 28. | 453-0619 | [1] | CORE AS-AFTERCOOLER | |
| 29. | 378-6180 | [1] | SHROUD AS | |
| 30. | 378-6181 | [1] | PLATE AS | |
| 31. | 3K-0360 | [1] | SEAL-O-RING | |
| 32. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 33. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 34. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 35. | 8T-4136 M | [10] | BOLT (M10X1.5X25-MM) | |
| 36. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 37. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 38. | 8T-4189 M | [16] | BOLT (M8X1.25X20-MM) | |
| 39. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 40. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 41. | 157-0670 | [1] | CAP-DUST | |
| 42. | 6V-9027 | [1] | SEAL-O-RING | |
| 43. | 6V-5065 | [1] | SEAL-O-RING | |
| 44. | 154-9023 | [1] | VALVE-SAMPLING | |
| 45. | 096-4035 | [1] | CLIP | |
| 46. | 7Y-1976 E | HOSE-WATER (9-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL
Specifications
Testing and Adjusting
Disassembly and Assembly
