FRAME AND BODY
HOOD GPFENDER GP
ELECTRICAL AND STARTING SYSTEM
LIGHTING GPFRAME AND BODY
HOOD GPFRAME AND BODY
HOOD GP
#SEBP57240770
316-7200: HOOD GP
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 119-9706 | [2] | STUD-BALL | |
| 2. | 125-7037 | [1] | INSERT | |
| 3. | 272-0002 | [1] | STRIKER AS | |
| 4. | 311-0350 | [4] | CLIP | |
| 5. | 316-7190 | [1] | PIPE AS-EXHAUST EXTENSION | |
| 6. | 316-7210 Y | [1] | HOOD GP-REAR | |
| 7. | 322-9056 | [1] | TUBE AS-EXHAUST | |
| 8. | 395-3252 | [2] | STRUT | |
| 9. | 472-4128 C | [2] | BUMPER AS | |
| 10. | 351-8800 | [1] | TUBE | |
| 11. | 359-2863 | [1] | BRACKET | |
| 12. | 384-1563 | [1] | BRACKET | |
| 13. | 416-9794 CY | [1] | SUPPORT GP-HOOD | |
| 14. | 443-4880 Y | [1] | PANEL GP-HOOD (TOP) | |
| 15. | 369-0712 | [1] | BRACKET GP-MOUNTING | |
| 384-1560 | [1] | BRACKET AS-TOP | ||
| 335-9970 | [2] | BRACKET AS | ||
| 16. | 381-3643 | [2] | DAMPER AS | |
| (EACH INCLUDES) | ||||
| 311-0350 | [2] | CLIP | ||
| 17. | 129-3180 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 18. | 198-4777 | [4] | WASHER-HARD (11X25X10-MM THK) | |
| 19. | 339-8810 | [2] | INSERT | |
| 20. | 5P-0372 | [4] | LOCK PIN | |
| 21. | 7B-9323 | [4] | PIN | |
| 22. | 7X-0589 | [13] | WASHER-HARD (12X28.5X5-MM THK) | |
| 23. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 24. | 8T-0389 M | [14] | LOCKNUT (M10X1.5-THD) | |
| 25. | 8T-4121 C | [37] | WASHER-HARD (11X21X2.5-MM THK) | |
| 26. | 8T-4133 M | [9] | NUT (M10X1.5-THD) | |
| 27. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 28. | 8T-4195 M | [12] | BOLT (M10X1.5X30-MM) | |
| 29. | 8T-4196 M | [32] | BOLT (M10X1.5X35-MM) | |
| 30. | 8T-4222 | [22] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 31. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 32. | 8T-5005 CM | [5] | BOLT (M10X1.5X70-MM) | |
| 33. | 9M-5884 | [6] | BUMPER | |
| 34. | 122-8340 CE | SEAL (9-CM EACH) | ||
| 35. | 160-8500 M | [2] | NUT (M8X1.25-THD) | |
| 36. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 37. | 371-9008 | [1] | ANGLE AS (RH) | |
| 38. | 371-9007 | [1] | ANGLE AS (LH) | |
| 39. | 416-9795 C | [2] | BLOCK | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57240771
316-7210: HOOD GP-REAR
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [8] | NUT (RETAINER) | |
| 3. | 118-3147 | [1] | LINKAGE AS | |
| 7. | 277-8990 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 9. | 311-0450 Y | [1] | HANDLE GP-DOOR (HOOD ACCESS DOORS, PANELS) | |
| 14. | 316-7221 | [1] | GRILL | |
| 20. | 131-3540 M | [18] | LOCKNUT (M8X1.25-THD) | |
| 21. | 5P-4116 | [35] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 22. | 7X-0579 | [22] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 23. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4189 M | [41] | BOLT (M8X1.25X20-MM) | |
| 26. | 8T-4195 M | [12] | BOLT (M10X1.5X30-MM) | |
| 27. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 29. | 9X-2038 | [2] | WASHER (7X19X2-MM THK) | |
| 30. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 31. | 9X-2045 M | [5] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 32. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| 33. | 132-8502 E | SEAL (114.5-CM) | ||
| 33A. | 132-8502 E | SEAL (18.8-CM EACH) | ||
| 34. | 6V-0702 D | SEAL (0.9-M EACH) | ||
| 35. | 8T-7352 M | [2] | BOLT (M8X1.25X160-MM) | |
| 36. | 369-0710 Y | [1] | SUPPORT GP-HOOD | |
| 37. | 369-0711 Y | [1] | PANEL GP-HOOD (REAR) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57240772
316-7210: HOOD GP-REAR
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [8] | NUT (RETAINER) | |
| 3. | 372-2340 | [1] | LINKAGE AS | |
| 7. | 277-8990 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 9. | 311-0450 Y | [1] | HANDLE GP-DOOR (HOOD ACCESS DOORS, PANELS) | |
| 14. | 316-7221 | [1] | GRILL | |
| 20. | 131-3540 M | [18] | LOCKNUT (M8X1.25-THD) | |
| 21. | 5P-4116 | [35] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 22. | 7X-0579 | [22] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 23. | 8T-4121 C | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4189 M | [41] | BOLT (M8X1.25X20-MM) | |
| 26. | 8T-4195 M | [12] | BOLT (M10X1.5X30-MM) | |
| 27. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 29. | 9X-2038 | [2] | WASHER (7X19X2-MM THK) | |
| 30. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 31. | 9X-2045 M | [5] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 32. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| 33. | 132-8502 E | SEAL (114.5-CM) | ||
| 33A. | 132-8502 E | SEAL (18.8-CM EACH) | ||
| 34. | 7X-7877 CE | STRIP-EDGE (81.5-CM EACH) | ||
| 35. | 8T-7352 M | [2] | BOLT (M8X1.25X160-MM) | |
| 36. | 369-0710 Y | [1] | SUPPORT GP-HOOD | |
| 37. | 369-0711 Y | [1] | PANEL GP-HOOD (REAR) | |
| 38. | 119-9706 C | [2] | STUD-BALL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57240773
316-7210: HOOD GP-REAR
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [8] | NUT (RETAINER) | |
| 2. | 3E-8020 CM | [2] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 3. | 372-2340 | [1] | LINKAGE AS | |
| 4. | 118-3146 C | [1] | LATCH AS-ROTARY | |
| 7. | 277-8990 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 9. | 311-0450 Y | [1] | HANDLE GP-DOOR (HOOD ACCESS DOORS, PANELS) | |
| 14. | 316-7221 | [1] | GRILL | |
| 20. | 131-3540 M | [18] | LOCKNUT (M8X1.25-THD) | |
| 21. | 5P-4116 | [35] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 22. | 7X-0579 | [22] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 23. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4189 M | [41] | BOLT (M8X1.25X20-MM) | |
| 26. | 8T-4195 M | [12] | BOLT (M10X1.5X30-MM) | |
| 27. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 29. | 198-4775 C | [2] | WASHER-HARD (6.6X15X6-MM THK) | |
| 30. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 31. | 9X-2045 CM | [7] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 32. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| 33. | 132-8502 E | SEAL (114.5-CM) | ||
| 33A. | 132-8502 E | SEAL (18.8-CM EACH) | ||
| 34. | 7X-7877 E | STRIP-EDGE (81.5-CM EACH) | ||
| 35. | 8T-7352 M | [2] | BOLT (M8X1.25X160-MM) | |
| 36. | 369-0730 CY | [1] | SUPPORT GP-HOOD | |
| 37. | 369-0711 Y | [1] | PANEL GP-HOOD (REAR) | |
| 38. | 119-9706 | [2] | STUD-BALL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57240774
389-8828: KIT-FENDER
389-8828 KIT-FENDER
S/N W7K1-UP
S/N W7K1-UP
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 395-2231 Y | [1] | FENDER GP (RH) | |
| 2. | 395-2232 Y | [1] | FENDER GP (LH) | |
| 3. | 354-5867 | [2] | PLATE | |
| 4. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 5. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 6. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 7. | 8T-4226 | [2] | WASHER-PLATED (10.5X45X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57240775
509-8394: KIT-FENDER
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 464-6670 | [2] | MUD FLAP | |
| 2. | 436-2368 | [8] | COLLAR | |
| 3. | 436-2370 | [20] | PLUG | |
| 4. | 464-6660 | [2] | FENDER AS | |
| 5. | 464-6662 | [2] | DEFLECTOR | |
| 6. | 499-1585 | [2] | STRIP AS | |
| (EACH INCLUDES) | ||||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 7. | 506-8610 | [1] | PLATE (RH) | |
| 8. | 506-8611 | [1] | PLATE (LH) | |
| 9. | 332-4695 M | [10] | NUT (M8X1.25-THD) | |
| 10. | 7X-0579 | [18] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 11. | 7X-7729 | [10] | WASHER (11X25X3-MM THK) | |
| 12. | 8T-3647 M | [8] | BOLT (M8X1.25X80-MM) | |
| 13. | 8T-4136 M | [24] | BOLT (M10X1.5X25-MM) | |
| 14. | 8T-4226 | [14] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 15. | 8T-7547 M | [10] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
#SEBP57240776
380-8458: KIT-GUARD
380-8458 KIT-GUARD -INDUSTRIAL
S/N W7K1-2460
THIS KIT PROVIDES THE NECESSARY COMPONENTS TO FIELD INSTALL AN INDUSTRIAL AR ON MEDIUM WHEEL LOADERS,. INCLUDES HITCH GUARDS, LIFT CYLINDER GUARDS, LIGHT GUARDS, NARROW FENDERS, DRIVE SHAFT GUARD, BOTTOM GUARD. TILT CYLINDER GUARD, INDUSTRIAL STEPS, ENGINE AIR PRECLEANER, CAB AIR PRECLEANER, SERVICE CENTER PROTECTION AND. ADDITIONAL COUNTERWEIGHT
S/N W7K1-2460
THIS KIT PROVIDES THE NECESSARY COMPONENTS TO FIELD INSTALL AN INDUSTRIAL AR ON MEDIUM WHEEL LOADERS,. INCLUDES HITCH GUARDS, LIFT CYLINDER GUARDS, LIGHT GUARDS, NARROW FENDERS, DRIVE SHAFT GUARD, BOTTOM GUARD. TILT CYLINDER GUARD, INDUSTRIAL STEPS, ENGINE AIR PRECLEANER, CAB AIR PRECLEANER, SERVICE CENTER PROTECTION AND. ADDITIONAL COUNTERWEIGHT
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 276-5748 | [1] | BRACKET (LH) | ||
| 276-5750 | [1] | BRACKET (RH) | ||
| (ABOVE PARTS ARE PART OF THE 276-8090 LINES GUARD GP) | ||||
| 9R-2821 M | [4] | BOSS (M10X1.5X15-MM) | ||
| (ABOVE PARTS ARE PART OF THE 277-5782 LOADER FRAME HARDWARE GP) | ||||
| 280-2240 | [2] | BAFFLE | ||
| 280-2241 | [2] | CLAMP | ||
| 295-8298 | [4] | CLAMP | ||
| 132-6964 | [4] | PLATE | ||
| (ABOVE PARTS ARE PART OF THE 280-2263 LIFT CYLINDER GUARD GP) | ||||
| 232-3583 | [1] | PRECLEANER GP | ||
| 293-6118 | [1] | BRACKET | ||
| 364-8938 | [1] | INSULATION | ||
| 364-8939 | [2] | INSULATION | ||
| 299-3205 | [1] | SEAL | ||
| 299-3206 | [2] | SEAL | ||
| (ABOVE PARTS ARE PART OF THE 297-1762 PRECLEANER GP) | ||||
| 4V-9694 | [1] | COVER AS (RH) | ||
| 4V-9678 | [1] | STRIP | ||
| 4V-9695 | [1] | COVER AS (LH) | ||
| 4V-9678 | [1] | STRIP | ||
| 119-5864 | [1] | LINK AS | ||
| 4V-2049 | [1] | LINK | ||
| 4V-2057 | [1] | BEARING-SPHERICAL | ||
| 119-1284 | [1] | MOUNT AS | ||
| 4V-2052 | [1] | SUPPORT AS | ||
| 4V-2053 | [2] | SHIM | ||
| 7X-0368 | [4] | BOLT (3/4-10X3-IN) | ||
| 8T-4994 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| 4V-0368 | [1] | BLOCK | ||
| 4V-2054 | [2] | BLOCK | ||
| 4V-2048 | [1] | PIN | ||
| 4V-2051 | [1] | PIN | ||
| 1H-8134 | [2] | RING-RETAINING | ||
| 4V-2056 | [2] | SHIM | ||
| (ABOVE PARTS ARE PART OF THE 338-4542 TRANSMISSION SUPPORT GP) | ||||
| 352-9181 Y | [1] | PRECLEANER GP | ||
| (ABOVE PARTS ARE PART OF THE 348-9760 PRECLEANER GP) | ||||
| [1] | PLATE | |||
| [3] | PLATE | |||
| [1] | PLATE | |||
| (ABOVE PARTS ARE PART OF THE 371-0856 FUEL TANK & MOUNTING GP) | ||||
| [1] | BRACKET AS | |||
| 7T-1099 | [1] | LINK | ||
| [4] | BLOCK | |||
| 7Y-2522 | [1] | PLATE | ||
| 9S-1302 | [8] | WASHER (27X44.45X2.5-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 377-3489 REAR FRAME HARDWARE GP) | ||||
| 377-3491 | [1] | GUARD AS (RH) | ||
| 377-3493 | [1] | GUARD AS (LH) | ||
| 377-3495 | [1] | GUARD | ||
| 377-3496 | [1] | GUARD | ||
| 377-3497 | [1] | GUARD | ||
| [1] | PLATE | |||
| 265-9596 | [4] | WASHER-HARD (13.5X30X9-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 377-3490 HITCH & STEERING GUARD GP) | ||||
| 377-3509 | [1] | PLATE AS | ||
| 377-3503 | [1] | COVER | ||
| 377-3502 | [1] | PLATE | ||
| 377-3504 | [1] | PLATE | ||
| [1] | PLATE | |||
| (ABOVE PARTS ARE PART OF THE 377-3500 VALVE & FILTER SUPPORT GP) | ||||
| 450-5966 | [4] | BRACKET AS | ||
| 377-8361 | [2] | CLAMP AS | ||
| 393-5509 | [2] | CLAMP AS | ||
| 450-5968 | [2] | GUARD AS-CYLINDER | ||
| (EACH INCLUDES) | ||||
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| [4] | CLAMP (TILT CYLINDER GUARD) | |||
| 377-8362 | [2] | CLAMP (TILT CYLINDER GUARD) | ||
| 450-5367 | [4] | BEARING | ||
| 365-6813 | [4] | WASHER-HARD (13.5X27X8-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 377-8355 TILT CYLINDER GUARD GP) | ||||
| 378-8212 | [1] | COVER AS-GUARD | ||
| 378-8205 | [1] | SHEET AS | ||
| 378-8206 | [1] | SHEET AS | ||
| 378-8214 | [1] | COVER | ||
| 340-7805 | [2] | PLATE | ||
| 378-8211 | [1] | SHEET | ||
| (ABOVE PARTS ARE PART OF THE 378-8203 FRONT GUARD GP) | ||||
| 385-1282 | [2] | COVER AS | ||
| [2] | PLATE | |||
| (ABOVE PARTS ARE PART OF THE 380-0321 STEERING GUARD GP) | ||||
| 380-0338 | [2] | BRACKET AS | ||
| 380-0335 | [8] | PLATE AS | ||
| 381-1734 | [4] | STEP AS | ||
| 380-0333 | [6] | BRACKET | ||
| 380-0334 | [2] | BRACKET | ||
| 380-0331 | [16] | SPACER (12X20X72-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 380-0330 LADDER GP) | ||||
| 354-4783 | [1] | ANGLE AS (RH) | ||
| 354-4790 | [1] | ANGLE AS (LH) | ||
| 267-8516 | [1] | FENDER AS-FRONT (RH) | ||
| 267-8520 | [1] | FENDER AS-FRONT (LH) | ||
| (ABOVE PARTS ARE PART OF THE 381-1457 FENDER GP) | ||||
| 269-3363 | [2] | PLATE AS | ||
| 169-4370 | [2] | FLAP | ||
| 8T-0389 M | [10] | LOCKNUT (M10X1.5-THD) | ||
| (ABOVE PARTS ARE PART OF THE 381-3322 BAFFLE GP) | ||||
| 382-5448 | [1] | GUARD AS | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 382-5936 | [1] | GUARD AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 289-3162 | [1] | PLATE | ||
| (ABOVE PARTS ARE PART OF THE 382-2983 BOTTOM GUARD GP) | ||||
| [1] | COUNTERWEIGHT AS | |||
| (ABOVE PARTS ARE PART OF THE 382-2986 COUNTERWEIGHT GP) | ||||
| 251-9756 | [1] | GUARD AS | ||
| 119-7899 | [2] | SUPPORT AS | ||
| 9C-2175 | [2] | PIN | ||
| 7X-3151 | [4] | WASHER (17.5X63.5X9.6-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 382-3964 POWER TRAIN GUARD GP) | ||||
| 361-7062 | [1] | BRACKET AS | ||
| 256-3874 | [1] | GUARD AS | ||
| 382-2985 | [1] | GUARD AS | ||
| 332-4695 M | [6] | NUT (M8X1.25-THD) | ||
| 3B-4640 | [4] | PIN-COTTER | ||
| 4V-9824 | [2] | PIN | ||
| (ABOVE PARTS ARE PART OF THE 382-4002 BOTTOM GUARD GP) | ||||
| 7K-1181 | [2] | STRAP-CABLE | ||
| [1] | BAFFLE | |||
| (ABOVE PARTS ARE PART OF THE 382-4003 BAFFLE GP) | ||||
| 189-8193 | [1] | BRACKET AS | ||
| 189-8196 | [1] | PLATE | ||
| (ABOVE PARTS ARE PART OF THE 383-4125 AXLE GUARD GP) | ||||
| 3E-6466 Y | [2] | LAMP GP-SIGNAL (24-VOLT) | ||
| 219-6487 Y | [2] | LAMP GP-FLOOD (24-VOLT, 70-WATT) | ||
| 358-1345 Y | [1] | HARNESS AS-LIGHTING (LH) | ||
| 374-3278 Y | [1] | HARNESS AS-LIGHTING (RH) | ||
| 287-1936 | [1] | BRACKET AS | ||
| 287-3898 | [1] | BRACKET AS | ||
| 456-7665 | [2] | BRACKET AS | ||
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 282-3443 | [1] | SUPPORT AS (LH) | ||
| 282-3444 | [1] | SUPPORT AS (RH) | ||
| 5C-9553 M | [8] | BOLT (M6X1X16-MM) | ||
| 130-5301 | [2] | CLIP | ||
| 456-7706 | [2] | GUARD | ||
| 8T-9471 | [2] | GROMMET | ||
| 5C-2890 M | [6] | NUT (M6X1-THD) | ||
| 196-2185 | [2] | PLATE | ||
| 456-7668 | [4] | PLATE AS | ||
| 198-4765 | [2] | WASHER-HARD (8.8X20X8-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 383-4145 LIGHTING GP) | ||||
| 383-1294 | [1] | GUARD AS-BOTTOM | ||
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 383-1296 | [1] | GUARD AS-BOTTOM | ||
| 8T-3597 M | [4] | NUT-WELD (M12X1.75-THD) | ||
| 388-1117 | [1] | GUARD AS-BOTTOM | ||
| 394-3247 | [1] | GUARD AS-BOTTOM | ||
| 394-3248 | [1] | GUARD AS-BOTTOM | ||
| 380-0325 | [1] | PLATE-GUARD | ||
| 388-1112 | [2] | SHEET | ||
| (ABOVE PARTS ARE PART OF THE 388-1121 DRIVE SHAFT GUARD GP) | ||||
| [2] | BAR | |||
| [4] | BLOCK | |||
| 112-9073 M | [16] | STUD-WELD (M12X1.75X21.1-MM) | ||
| (ABOVE PARTS ARE PART OF THE 388-1123 LOADER FRAME HARDWARE GP) | ||||
| 234-1530 | [3] | STEP AS | ||
| 377-3516 | [1] | SHEET AS | ||
| 377-3518 | [1] | SHEET AS | ||
| 301-7484 | [1] | HANDHOLD | ||
| (ABOVE PARTS ARE PART OF THE 377-3515 LADDER GP) | ||||
| 377-3527 | [1] | SHEET AS | ||
| [1] | PLATE | |||
| (ABOVE PARTS ARE PART OF THE 377-3520 LADDER GP) | ||||
| 7X-0369 | [4] | BOLT (3/4-10X3.25-IN) | ||
| 7X-0371 | [4] | BOLT (3/4-10X3.75-IN) | ||
| 7X-2549 M | [2] | BOLT (M12X1.75X100-MM) | ||
| 7X-2584 M | [4] | BOLT (M30X3.5X140-MM) | ||
| 7X-3179 | [2] | BOLT (3/4-10X9-IN) | ||
| 8C-8723 M | [6] | BOLT (M30X3.5X80-MM) | ||
| 8T-0365 M | [4] | BOLT (M24X3X240-MM) | ||
| 8T-4136 M | [30] | BOLT (M10X1.5X25-MM) | ||
| 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | ||
| 8T-4138 M | [7] | BOLT (M6X1X20-MM) | ||
| 8T-4139 M | [14] | BOLT (M12X1.75X30-MM) | ||
| 8T-4140 M | [2] | BOLT (M16X2X60-MM) | ||
| 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | ||
| 8T-4185 M | [6] | BOLT (M10X1.5X50-MM) | ||
| 8T-4186 M | [6] | BOLT (M10X1.5X40-MM) | ||
| 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | ||
| 8T-4193 M | [6] | BOLT (M16X2X50-MM) | ||
| 8T-4195 M | [29] | BOLT (M10X1.5X30-MM) | ||
| 8T-4956 M | [16] | BOLT (M12X1.75X35-MM) | ||
| 8T-7547 M | [8] | BOLT (M8X1.25X30-MM) | ||
| 183-7121 M | [15] | BOLT (M10X1.5X35-MM) | ||
| 344-1201 | [4] | BOLT (M10X1.5X20-MM) | ||
| 347-9208 | [16] | BOLT (M10X1.5X90-MM) | ||
| 362-1320 M | [12] | BOLT (M12X1.75X35-MM) | ||
| 368-5078 | [6] | BOLT (M12X1.75X30-MM) | ||
| 368-5080 | [15] | BOLT (M10X1.5X30-MM) | ||
| 368-5081 | [37] | BOLT (M10X1.5X25-MM) | ||
| 8X-3549 | [1] | BLOCK | ||
| 8X-5147 M | [7] | BLOCK (M10X1.5-MM) | ||
| 6P-5560 | [2] | GROMMET | ||
| 8T-4133 M | [4] | NUT (M10X1.5-THD) | ||
| 8T-4244 M | [20] | NUT (M12X1.75-THD) | ||
| 329-3356 M | [8] | NUT (M12X1.75-THD) | ||
| 344-5675 M | [36] | NUT (M10X1.5-THD) | ||
| 3E-6924 M | [8] | SCREW-TRUSS HEAD (M6X1X50-MM) | ||
| 234-1531 | [5] | STEP | ||
| 8T-4967 M | [4] | STUD-WELD (M10X1.5X23-MM) | ||
| 5P-1076 | [60] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | ||
| 7X-0583 | [4] | WASHER-HARD (17X45X6-MM THK) | ||
| 7X-0589 | [16] | WASHER-HARD (12X28.5X5-MM THK) | ||
| 7X-0593 | [10] | WASHER-HARD (34X57X6-MM THK) | ||
| 7X-3391 | [8] | WASHER-HARD (13.5X32X6-MM THK) | ||
| 7X-7729 | [71] | WASHER (11X25X3-MM THK) | ||
| 8T-4121 | [50] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4222 | [49] | WASHER-PLATED (11X32X2.5-MM THK) | ||
| 8T-4223 | [26] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-4994 | [6] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| 9X-2038 | [8] | WASHER (7X19X2-MM THK) | ||
| 9X-8256 | [21] | WASHER (6.6X12X2-MM THK) | ||
| 198-4777 | [12] | WASHER-HARD (11X25X10-MM THK) | ||
| 344-1199 | [22] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57240777
393-2839: KIT-GUARD
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 116-5763 H | [8] | CLIP-SPRING | |
| 2. | 289-5995 J | [8] | GUARD GP-LIGHTING | |
| 3. | 299-3204 L | [1] | SEAL | |
| 4. | 299-3208 L | [1] | BRACKET | |
| 5. | 299-3212 L | [1] | DUCT AS | |
| 6. | 345-7725 LM | [2] | SCREW-TRUSS HEAD (M12X1.75X25-MM) | |
| 7. | 372-7798 H | [1] | PLATE AS | |
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 8. | 372-7800 H | [1] | PLATE AS | |
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 9. | 372-7802 H | [1] | PLATE | |
| 10. | 372-7803 H | [1] | PLATE | |
| 11. | 372-7811 L | [1] | RUBBER | |
| 12. | 372-7812 L | [1] | RUBBER | |
| 13. | 372-7813 L | [1] | RUBBER | |
| 14. | 372-7814 L | [1] | SPACER | |
| 15. | 372-7815 L | [1] | SPACER | |
| 16. | 372-7816 L | [1] | SPACER | |
| 17. | 372-7817 L | [3] | SPACER | |
| 18. | 372-7818 L | [1] | SEAL | |
| 19. | 372-7819 L | [1] | SEAL | |
| 20. | 372-7820 L | [2] | COVER | |
| 21. | 372-7821 L | [1] | COVER | |
| 22. | 396-9512 L | [1] | COVER AS | |
| 23. | 121-9870 LM | [3] | SCREW-MACHINE (M6X1X40-MM) | |
| 24. | 2G-8096 L | [1] | MOUNTING | |
| 25. | 5C-7261 JM | [8] | NUT (M8X1.25-THD) | |
| 26. | 6P-5560 L | [2] | GROMMET | |
| 27. | 6V-8836 LM | [8] | BOLT (M6X1X14-MM) | |
| 28. | 8T-4189 HM | [8] | BOLT (M8X1.25X20-MM) | |
| 29. | 8T-4224 H | [16] | WASHER-HARD (8.8X16X2-MM THK) | |
| 30. | 8T-4908 HM | [8] | BOLT (M8X1.25X25-MM) | |
| 31. | 8T-7329 JM | [8] | BOLT (M8X1.25X55-MM) | |
| 32. | 9X-2038 L | [25] | WASHER (7X19X2-MM THK) | |
| 33. | 9X-2043 LM | [12] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 34. | 9X-2044 LM | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| H | FROM GUARD GP-CAB | |||
| J | FROM GUARD GP-LIGHTING | |||
| L | FROM COVER GP-CAB | |||
| M | METRIC PART | |||
#SEBP57240778
419-6615: KIT-GUARD
419-6615 KIT-GUARD -INDUSTRIAL
S/N W7K2461-UP
THIS KIT PROVIDES THE NECESSARY COMPONENTS TO FIELD INSTALL AN INDUSTRIAL AR ON MEDIUM WHEEL LOADERS,. INCLUDES HITCH GUARDS, LIFT CYLINDER GUARDS, LIGHT GUARDS, NARROW FENDERS, DRIVE SHAFT GUARD, BOTTOM GUARD. TILT CYLINDER GUARD, INDUSTRIAL STEPS, ENGINE AIR PRECLEANER, CAB AIR PRECLEANER, SERVICE CENTER PROTECTION AND. ADDITIONAL COUNTERWEIGHT
S/N W7K2461-UP
THIS KIT PROVIDES THE NECESSARY COMPONENTS TO FIELD INSTALL AN INDUSTRIAL AR ON MEDIUM WHEEL LOADERS,. INCLUDES HITCH GUARDS, LIFT CYLINDER GUARDS, LIGHT GUARDS, NARROW FENDERS, DRIVE SHAFT GUARD, BOTTOM GUARD. TILT CYLINDER GUARD, INDUSTRIAL STEPS, ENGINE AIR PRECLEANER, CAB AIR PRECLEANER, SERVICE CENTER PROTECTION AND. ADDITIONAL COUNTERWEIGHT
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 276-5748 | [1] | BRACKET (LH) | ||
| 276-5750 | [1] | BRACKET (RH) | ||
| (ABOVE PARTS ARE PART OF THE 276-8090 LINES GUARD GP) | ||||
| 9R-2821 M | [4] | BOSS (M10X1.5X15-MM) | ||
| (ABOVE PARTS ARE PART OF THE 277-5782 LOADER FRAME HARDWARE GP) | ||||
| 280-2240 | [2] | BAFFLE | ||
| 280-2241 | [2] | CLAMP | ||
| 295-8298 | [4] | CLAMP | ||
| 132-6964 | [4] | PLATE | ||
| (ABOVE PARTS ARE PART OF THE 280-2263 LIFT CYLINDER GUARD GP) | ||||
| 232-3583 | [1] | PRECLEANER GP | ||
| 293-6118 | [1] | BRACKET | ||
| 364-8938 | [1] | INSULATION | ||
| 364-8939 | [2] | INSULATION | ||
| 299-3205 | [1] | SEAL | ||
| 299-3206 | [2] | SEAL | ||
| (ABOVE PARTS ARE PART OF THE 297-1762 PRECLEANER GP) | ||||
| 4V-9694 | [1] | COVER AS (RH) | ||
| 4V-9678 | [1] | STRIP | ||
| 4V-9695 | [1] | COVER AS (LH) | ||
| 4V-9678 | [1] | STRIP | ||
| 119-5864 | [1] | LINK AS | ||
| 4V-2049 | [1] | LINK | ||
| 4V-2057 | [1] | BEARING-SPHERICAL | ||
| 119-1284 | [1] | MOUNT AS | ||
| 4V-2052 | [1] | SUPPORT AS | ||
| 4V-2053 | [2] | SHIM | ||
| 7X-0368 | [4] | BOLT (3/4-10X3-IN) | ||
| 8T-4994 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| 4V-0368 | [1] | BLOCK | ||
| 4V-2054 | [2] | BLOCK | ||
| 4V-2048 | [1] | PIN | ||
| 4V-2051 | [1] | PIN | ||
| 1H-8134 | [2] | RING-RETAINING | ||
| 4V-2056 | [2] | SHIM | ||
| (ABOVE PARTS ARE PART OF THE 338-4542 TRANSMISSION SUPPORT GP) | ||||
| 352-9181 Y | [1] | PRECLEANER GP | ||
| (ABOVE PARTS ARE PART OF THE 348-9760 PRECLEANER GP) | ||||
| [1] | PLATE | |||
| [3] | PLATE | |||
| [1] | PLATE | |||
| (ABOVE PARTS ARE PART OF THE 371-0856 FUEL TANK & MOUNTING GP) | ||||
| [1] | BRACKET AS | |||
| 7T-1099 | [1] | LINK | ||
| [4] | BLOCK | |||
| 7Y-2522 | [1] | PLATE | ||
| 9S-1302 | [8] | WASHER (27X44.45X2.5-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 377-3489 REAR FRAME HARDWARE GP) | ||||
| 377-3491 | [1] | GUARD AS (RH) | ||
| 377-3493 | [1] | GUARD AS (LH) | ||
| 377-3495 | [1] | GUARD | ||
| 377-3496 | [1] | GUARD | ||
| 377-3497 | [1] | GUARD | ||
| [1] | PLATE | |||
| 265-9596 | [4] | WASHER-HARD (13.5X30X9-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 377-3490 HITCH & STEERING GUARD GP) | ||||
| 377-3509 | [1] | PLATE AS | ||
| 377-3503 | [1] | COVER | ||
| 377-3502 | [1] | PLATE | ||
| 377-3504 | [1] | PLATE | ||
| [1] | PLATE | |||
| (ABOVE PARTS ARE PART OF THE 377-3500 VALVE & FILTER SUPPORT GP) | ||||
| 450-5966 | [4] | BRACKET AS | ||
| 377-8361 | [2] | CLAMP AS | ||
| 393-5509 | [2] | CLAMP AS | ||
| 450-5968 | [2] | GUARD AS-CYLINDER | ||
| (EACH INCLUDES) | ||||
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| [4] | CLAMP (TILT CYLINDER GUARD) | |||
| 377-8362 | [2] | CLAMP (TILT CYLINDER GUARD) | ||
| 450-5367 | [4] | BEARING | ||
| 365-6813 | [4] | WASHER-HARD (13.5X27X8-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 377-8355 TILT CYLINDER GUARD GP) | ||||
| 378-8212 | [1] | COVER AS-GUARD | ||
| 378-8205 | [1] | SHEET AS | ||
| 378-8206 | [1] | SHEET AS | ||
| 378-8214 | [1] | COVER | ||
| 340-7805 | [2] | PLATE | ||
| 378-8211 | [1] | SHEET | ||
| (ABOVE PARTS ARE PART OF THE 378-8203 FRONT GUARD GP) | ||||
| 385-1282 | [2] | COVER AS | ||
| [2] | PLATE | |||
| (ABOVE PARTS ARE PART OF THE 380-0321 STEERING GUARD GP) | ||||
| 380-0338 | [2] | BRACKET AS | ||
| 380-0335 | [8] | PLATE AS | ||
| 381-1734 | [4] | STEP AS | ||
| 380-0333 | [6] | BRACKET | ||
| 380-0334 | [2] | BRACKET | ||
| 380-0331 | [16] | SPACER (12X20X72-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 380-0330 LADDER GP) | ||||
| 354-4783 | [1] | ANGLE AS (RH) | ||
| 354-4790 | [1] | ANGLE AS (LH) | ||
| 267-8516 | [1] | FENDER AS-FRONT (RH) | ||
| 267-8520 | [1] | FENDER AS-FRONT (LH) | ||
| (ABOVE PARTS ARE PART OF THE 381-1457 FENDER GP) | ||||
| 269-3363 | [2] | PLATE AS | ||
| 169-4370 | [2] | FLAP | ||
| 8T-0389 M | [10] | LOCKNUT (M10X1.5-THD) | ||
| (ABOVE PARTS ARE PART OF THE 381-3322 BAFFLE GP) | ||||
| 382-5448 | [1] | GUARD AS | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 382-5936 | [1] | GUARD AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 289-3162 | [1] | PLATE | ||
| (ABOVE PARTS ARE PART OF THE 382-2983 BOTTOM GUARD GP) | ||||
| [1] | COUNTERWEIGHT AS | |||
| (ABOVE PARTS ARE PART OF THE 382-2986 COUNTERWEIGHT GP) | ||||
| 251-9756 | [1] | GUARD AS | ||
| 119-7899 | [2] | SUPPORT AS | ||
| 9C-2175 | [2] | PIN | ||
| 7X-3151 | [4] | WASHER (17.5X63.5X9.6-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 382-3964 POWER TRAIN GUARD GP) | ||||
| 361-7062 | [1] | BRACKET AS | ||
| 256-3874 | [1] | GUARD AS | ||
| 382-2985 | [1] | GUARD AS | ||
| 332-4695 M | [6] | NUT (M8X1.25-THD) | ||
| 3B-4640 | [4] | PIN-COTTER | ||
| 4V-9824 | [2] | PIN | ||
| (ABOVE PARTS ARE PART OF THE 382-4002 BOTTOM GUARD GP) | ||||
| 7K-1181 | [2] | STRAP-CABLE | ||
| [1] | BAFFLE | |||
| (ABOVE PARTS ARE PART OF THE 382-4003 BAFFLE GP) | ||||
| 189-8193 | [1] | BRACKET AS | ||
| 189-8196 | [1] | PLATE | ||
| (ABOVE PARTS ARE PART OF THE 383-4125 AXLE GUARD GP) | ||||
| 3E-6466 Y | [2] | LAMP GP-SIGNAL (24-VOLT) | ||
| 219-6487 Y | [2] | LAMP GP-FLOOD (24-VOLT, 70-WATT) | ||
| 358-1345 Y | [1] | HARNESS AS-LIGHTING (LH) | ||
| 374-3278 Y | [1] | HARNESS AS-LIGHTING (RH) | ||
| 287-1936 | [1] | BRACKET AS | ||
| 287-3898 | [1] | BRACKET AS | ||
| 456-7665 | [2] | BRACKET AS | ||
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 282-3443 | [1] | SUPPORT AS (LH) | ||
| 282-3444 | [1] | SUPPORT AS (RH) | ||
| 5C-9553 M | [8] | BOLT (M6X1X16-MM) | ||
| 130-5301 | [2] | CLIP | ||
| 456-7706 | [2] | GUARD | ||
| 456-7668 | [4] | PLATE AS | ||
| 8T-9471 | [2] | GROMMET | ||
| 5C-2890 M | [6] | NUT (M6X1-THD) | ||
| 196-2185 | [2] | PLATE | ||
| 198-4765 | [2] | WASHER-HARD (8.8X20X8-MM THK) | ||
| (ABOVE PARTS ARE PART OF THE 383-4145 LIGHTING GP) | ||||
| 383-1294 | [1] | GUARD AS-BOTTOM | ||
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 383-1296 | [1] | GUARD AS-BOTTOM | ||
| 8T-3597 M | [4] | NUT-WELD (M12X1.75-THD) | ||
| 388-1117 | [1] | GUARD AS-BOTTOM | ||
| 394-3247 | [1] | GUARD AS-BOTTOM | ||
| 394-3248 | [1] | GUARD AS-BOTTOM | ||
| 380-0325 | [1] | PLATE-GUARD | ||
| 388-1112 | [2] | SHEET | ||
| (ABOVE PARTS ARE PART OF THE 388-1121 DRIVE SHAFT GUARD GP) | ||||
| [2] | BAR | |||
| [4] | BLOCK | |||
| 112-9073 M | [16] | STUD-WELD (M12X1.75X21.1-MM) | ||
| (ABOVE PARTS ARE PART OF THE 388-1123 LOADER FRAME HARDWARE GP) | ||||
| 234-1530 | [3] | STEP AS | ||
| 377-3516 | [1] | SHEET AS | ||
| 377-3518 | [1] | SHEET AS | ||
| 301-7484 | [1] | HANDHOLD | ||
| (ABOVE PARTS ARE PART OF THE 377-3515 LADDER GP) | ||||
| 377-3527 | [1] | SHEET AS | ||
| [1] | PLATE | |||
| (ABOVE PARTS ARE PART OF THE 377-3520 LADDER GP) | ||||
| 7X-0369 | [4] | BOLT (3/4-10X3.25-IN) | ||
| 7X-0371 | [4] | BOLT (3/4-10X3.75-IN) | ||
| 7X-2549 M | [2] | BOLT (M12X1.75X100-MM) | ||
| 7X-2584 M | [4] | BOLT (M30X3.5X140-MM) | ||
| 7X-3179 | [2] | BOLT (3/4-10X9-IN) | ||
| 8C-8723 M | [6] | BOLT (M30X3.5X80-MM) | ||
| 8T-0365 M | [4] | BOLT (M24X3X240-MM) | ||
| 8T-4136 M | [67] | BOLT (M10X1.5X25-MM) | ||
| 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | ||
| 8T-4138 M | [7] | BOLT (M6X1X20-MM) | ||
| 8T-4139 M | [20] | BOLT (M12X1.75X30-MM) | ||
| 8T-4140 M | [2] | BOLT (M16X2X60-MM) | ||
| 8T-4178 M | [16] | BOLT (M10X1.5X90-MM) | ||
| 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | ||
| 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | ||
| 8T-4193 M | [6] | BOLT (M16X2X50-MM) | ||
| 8T-4195 M | [44] | BOLT (M10X1.5X30-MM) | ||
| 8T-4196 M | [16] | BOLT (M10X1.5X35-MM) | ||
| 8T-4956 M | [16] | BOLT (M12X1.75X35-MM) | ||
| 8T-7547 M | [8] | BOLT (M8X1.25X30-MM) | ||
| 183-7121 M | [15] | BOLT (M10X1.5X35-MM) | ||
| 362-1320 M | [12] | BOLT (M12X1.75X35-MM) | ||
| 8X-3549 | [1] | BLOCK | ||
| 8X-5147 M | [7] | BLOCK (M10X1.5-MM) | ||
| 6P-5560 | [2] | GROMMET | ||
| 8T-4133 M | [4] | NUT (M10X1.5-THD) | ||
| 8T-4244 M | [20] | NUT (M12X1.75-THD) | ||
| 329-3356 M | [8] | NUT (M12X1.75-THD) | ||
| 344-5675 M | [36] | NUT (M10X1.5-THD) | ||
| 3E-6924 M | [8] | SCREW-TRUSS HEAD (M6X1X50-MM) | ||
| 234-1531 | [5] | STEP | ||
| 8T-4967 M | [4] | STUD-WELD (M10X1.5X23-MM) | ||
| 5P-1076 | [60] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | ||
| 7X-0583 | [4] | WASHER-HARD (17X45X6-MM THK) | ||
| 7X-0589 | [16] | WASHER-HARD (12X28.5X5-MM THK) | ||
| 7X-0593 | [10] | WASHER-HARD (34X57X6-MM THK) | ||
| 7X-3391 | [8] | WASHER-HARD (13.5X32X6-MM THK) | ||
| 7X-7729 | [71] | WASHER (11X25X3-MM THK) | ||
| 8T-4121 | [62] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4222 | [49] | WASHER-PLATED (11X32X2.5-MM THK) | ||
| 8T-4223 | [26] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-4994 | [6] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| 9X-2038 | [8] | WASHER (7X19X2-MM THK) | ||
| 9X-8256 | [21] | WASHER (6.6X12X2-MM THK) | ||
| 198-4777 | [16] | WASHER-HARD (11X25X10-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57240779
494-1152: KIT-HOOD
494-1152 KIT-HOOD
S/N W7K1-UP
S/N W7K1-UP
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 508-6908 Y | [1] | HARNESS AS-HOOD | ||
| 465-6623 Y | [1] | PANEL GP-SIDE (RH) | ||
| 465-6627 Y | [1] | PANEL GP-SIDE | ||
| 185-2245 | [1] | ADAPTER AS | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 157-8510 | [1] | ADAPTER | ||
| 514-4177 | [1] | BLOCK | ||
| 514-4178 | [1] | BLOCK | ||
| 451-1558 | [2] | BLOCK AS | ||
| 7X-2533 M | [4] | BOLT (M6X1X35-MM) | ||
| 7X-2555 M | [8] | BOLT (M16X2X80-MM) | ||
| 8T-4136 M | [15] | BOLT (M10X1.5X25-MM) | ||
| 8T-4137 M | [9] | BOLT (M10X1.5X20-MM) | ||
| 8T-4138 M | [16] | BOLT (M6X1X20-MM) | ||
| 8T-4140 M | [4] | BOLT (M16X2X60-MM) | ||
| 8T-4171 M | [2] | BOLT (M6X1X12-MM) | ||
| 8T-4182 M | [4] | BOLT (M10X1.5X45-MM) | ||
| 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | ||
| 8T-4185 M | [3] | BOLT (M10X1.5X50-MM) | ||
| 8T-4195 M | [28] | BOLT (M10X1.5X30-MM) | ||
| 8T-4196 M | [13] | BOLT (M10X1.5X35-MM) | ||
| 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | ||
| 8T-4956 M | [8] | BOLT (M12X1.75X35-MM) | ||
| 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | ||
| 8T-7547 M | [6] | BOLT (M8X1.25X30-MM) | ||
| 3R-8530 | [8] | BOSS | ||
| 390-8555 | [2] | BRACKET | ||
| 392-0736 | [4] | BRACKET | ||
| 447-4905 | [1] | BRACKET | ||
| 465-6597 | [1] | BRACKET | ||
| 465-6598 | [1] | BRACKET | ||
| 491-6098 | [1] | BRACKET | ||
| 491-6099 | [1] | BRACKET | ||
| 127-9323 | [2] | BRACKET AS | ||
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 142-1657 | [1] | BRACKET AS | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 160-0564 | [1] | BRACKET AS | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 379-9414 | [2] | BRACKET AS | ||
| (EACH INCLUDES) | ||||
| 115-4968 | [2] | BUSHING | ||
| 415-8309 | [1] | BRACKET AS | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 415-8316 | [1] | BRACKET AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 450-3074 | [1] | BRACKET AS | ||
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 490-3083 | [1] | BRACKET AS | ||
| 490-3087 | [1] | BRACKET AS | ||
| 495-2582 | [1] | BRACKET AS | ||
| 9M-5884 | [6] | BUMPER | ||
| 171-2205 | [1] | CIRCUIT BREAKER AS (40-AMPERE) | ||
| 1H-3244 | [2] | LOCKWASHER | ||
| 4E-5724 | [2] | WASHER (7X12X1-MM THK) | ||
| 8T-0122 | [2] | NUT-FULL (1/4-28-THD) | ||
| 4P-7581 | [4] | CLIP (LADDER) | ||
| 4P-8134 | [1] | CLIP (LADDER) | ||
| 6D-4246 | [1] | CLIP (LOOP) | ||
| 8M-2773 | [1] | CLIP (LOOP) | ||
| 8T-1887 | [1] | CLIP (SLOT) | ||
| 8T-1888 | [1] | CLIP (TAB) | ||
| 9M-8406 | [1] | CLIP (LOOP) | ||
| 116-0118 | [1] | CLIP | ||
| 130-5300 | [3] | CLIP | ||
| 132-5789 | [6] | CLIP (LADDER) | ||
| 148-8327 | [1] | CONNECTOR AS | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8637 | [1] | CONNECTOR | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 446-8422 | [1] | CORE AS-OIL COOLER | ||
| 492-7056 | [1] | FILM-IDENTIFICATION (CIRCUIT BREAKER) | ||
| 507-1782 | [1] | FIXTURE AS | ||
| 4B-9806 | [1] | SETSCREW-SOCKET (1/4-20X0.25-IN) | ||
| 7Y-5074 E | GUARD-HOSE (176-CM) | |||
| 389-4393 I | [1] | HOSE AS | ||
| 491-0876 I | [1] | HOSE AS | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 390-8559 | [2] | MAGNET | ||
| 344-5673 M | [4] | NUT (M6X1-THD) | ||
| 344-5674 M | [12] | NUT (M8X1.25-THD) | ||
| 344-5675 M | [41] | NUT (M10X1.5-THD) | ||
| 7V-9791 | [2] | PIN | ||
| 454-0228 | [2] | PIN AS | ||
| 6S-6646 | [2] | PIN-COTTER | ||
| 423-6940 | [1] | PIPE AS | ||
| 510-8821 | [1] | PLATE AS | ||
| 6C-7875 | [3] | RIVET-POP | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 447-6471 | [1] | STRIP | ||
| 490-3089 | [2] | PLATE AS | ||
| 508-0851 | [1] | PLATE AS | ||
| 6C-7875 | [2] | RIVET-POP | ||
| 491-2771 | [1] | PLATE | ||
| 495-5932 | [1] | PLATE | ||
| 508-0852 | [1] | PLATE AS | ||
| 6C-7875 | [2] | RIVET-POP | ||
| 491-2772 | [1] | PLATE | ||
| 495-5932 | [1] | PLATE | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 7U-4891 | [2] | SCREW (10-32X1-IN) | ||
| 308-9131 J | SEAL (1200-MM) | |||
| 8R-0721 | [2] | SPACER (11X16X35-MM THK) | ||
| 091-0081 | [3] | SPACER (10.5X20X10-MM THK) | ||
| 133-6934 | [3] | SPACER (11X20X25-MM THK) | ||
| 302-3908 | [1] | SPACER (11X20X30-MM THK) | ||
| 415-1789 | [2] | SPACER (6.6X11X6-MM THK) | ||
| 204-1611 | [3] | STRAP (DUAL) | ||
| 3S-2093 | [18] | STRAP-CABLE | ||
| 7K-1181 | [33] | STRAP-CABLE | ||
| 178-3620 | [2] | STRAP-DUAL CLAMP | ||
| 8T-7501 M | [16] | STUD-WELD (M10X1.5X38-MM) | ||
| 491-3680 | [1] | SUPPORT AS | ||
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [9] | NUT-WELD (M10X1.5-THD) | ||
| 491-3681 | [1] | SUPPORT AS | ||
| 6V-9632 M | [6] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 508-0853 | [1] | SUPPORT GP-HOOD | ||
| 163-7988 | [2] | BUMPER AS | ||
| 6C-7875 | [7] | RIVET-POP | ||
| 356-4753 | [1] | PLATE | ||
| 356-4756 | [2] | STRIP | ||
| 491-5105 | [1] | BRACKET AS | ||
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 389-4398 | [1] | TUBE AS | ||
| 7X-7729 | [82] | WASHER (11X25X3-MM THK) | ||
| 9X-2038 | [2] | WASHER (7X19X2-MM THK) | ||
| 9X-8256 | [24] | WASHER (6.6X12X2-MM THK) | ||
| 5P-1076 | [14] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 5P-4116 | [10] | WASHER-HARD (8.8X20.5X2-MM THK) | ||
| 7X-0579 | [6] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 7X-0613 | [2] | WASHER-HARD (8.8X25.5X5-MM THK) | ||
| 7X-0632 | [1] | WASHER-HARD (11X36X6-MM THK) | ||
| 8T-4121 | [24] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 198-4777 | [7] | WASHER-HARD (11X25X10-MM THK) | ||
| 198-4780 | [4] | WASHER-HARD (17.5X32X8-MM THK) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | ORDER BY THE MILLIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
