ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP57270440
361-6292: WIRING GP-ELECTROHYDRAULIC
361-6292 WIRING GP-ELECTROHYDRAULIC
S/N PBG1-UP
PART OF 330-3854, 330-3855, 344-3968 CONTROL & MTG GP-ELHYD
Type 2
S/N PBG1-UP
PART OF 330-3854, 330-3855, 344-3968 CONTROL & MTG GP-ELHYD
Type 2
For full view, you need register
Parts for your 966K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8737 | [18] | PLUG-SEAL | |
| 2. | 228-6089 | [2] | PLUG (ROCKER SWITCH) | |
| 3. | 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | |
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 5. | 307-4671 Y | [2] | CONTROL GP-HANDLE (PILOT CONTROL) | |
| 6. | 332-2155 | [1] | SWITCH AS-PUSH BUTTON (DOWNSHIFT) | |
| 6A. | 332-2155 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 7. | 346-1069 | [1] | PLATE AS | |
| 8. | 391-4959 Y | [1] | HARNESS AS-CONTROL (ELECTROHYDRAULIC CONTROL POD) | |
| 9. | 127-2170 CM | [5] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 10. | 7C-4354 | [5] | CLIP | |
| 11. | 3E-4352 | [3] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 12. | 3S-2093 C | [9] | STRAP-CABLE | |
| 14. | 5C-7261 CM | [1] | NUT (M8X1.25-THD) | |
| 15. | 8R-3695 | [3] | GROMMET | |
| 16. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 17. | 8T-4224 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 9X-2045 M | [8] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 19. | 4P-8134 C | [1] | CLIP (LADDER) | |
| 20. | 7K-1181 C | [1] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57270441
361-6292: WIRING GP-ELECTROHYDRAULIC
361-6292 WIRING GP-ELECTROHYDRAULIC
S/N PBG1-UP
PART OF 330-3854, 330-3855, 344-3968 CONTROL & MTG GP-ELHYD
Type 3
S/N PBG1-UP
PART OF 330-3854, 330-3855, 344-3968 CONTROL & MTG GP-ELHYD
Type 3
For full view, you need register
Parts for your 966K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8737 | [18] | PLUG-SEAL | |
| 2. | 228-6089 | [2] | PLUG (ROCKER SWITCH) | |
| 3. | 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | |
| (EACH INCLUDES) | ||||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 5. | 361-6015 CY | [1] | CONTROL GP-HANDLE (LIFT, FLOAT, LOWER) | |
| 5A. | 361-6015 CY | [1] | CONTROL GP-HANDLE (DUMP, TILT BACK) | |
| 6. | 332-2155 | [1] | SWITCH AS-PUSH BUTTON (DOWNSHIFT) | |
| 6A. | 332-2155 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 7. | 346-1069 | [1] | PLATE AS | |
| 8. | 391-4959 Y | [1] | HARNESS AS-CONTROL (ELECTROHYDRAULIC CONTROL POD) | |
| 9. | 127-2170 M | [5] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 10. | 7C-4354 | [5] | CLIP | |
| 11. | 3E-4352 | [3] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 12. | 3S-2093 | [9] | STRAP-CABLE | |
| 14. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 15. | 8R-3695 | [3] | GROMMET | |
| 16. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 17. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 9X-2045 M | [8] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 19. | 4P-8134 | [1] | CLIP (LADDER) | |
| 20. | 7K-1181 | [1] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57270442
359-2092: WIRING GP-ELECTRONIC CONTROL
359-2092 WIRING GP-ELECTRONIC CONTROL
S/N MYE1-UP
PART OF 365-4046, 431-1441 ENGINE AR-COMPLETE
Type 1
FOR USE WITH MIXER ELBOW IN THE DOWNWARD POSITION
S/N MYE1-UP
PART OF 365-4046, 431-1441 ENGINE AR-COMPLETE
Type 1
FOR USE WITH MIXER ELBOW IN THE DOWNWARD POSITION
For full view, you need register
Parts for your 966K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [17] | STRAP-CABLE | |
| 2. | 4P-5918 | [1] | CLIP | |
| 3. | 7K-1181 C | [9] | STRAP-CABLE | |
| 4. | 054-4984 | [2] | SPACER (10X15X8.5-MM THK) | |
| 5. | 178-1780 | [1] | CLIP | |
| 6. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| 7. | 224-9222 | [1] | BRACKET | |
| 9. | 307-1674 | [5] | SPACER (9X16X36-MM THK) | |
| 10. | 349-7801 | [1] | BRACKET | |
| 11. | 4P-8134 | [1] | CLIP (LADDER) | |
| 12. | 443-6975 CY | [1] | WIRING GP-ENGINE | |
| 13. | 131-0353 M | [2] | STUD (M8X1.25X82.75-MM) | |
| 14. | 132-5789 | [1] | CLIP (LADDER) | |
| 15. | 178-3336 M | [5] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 16. | 9N-4685 | [1] | BLOCK | |
| 17. | 175-7141 M | [1] | NUT-HEX FLANGE (M10X1.5-THD) | |
| 18. | 303-4649 | [1] | CLIP (LADDER) | |
| 19. | 132-7551 | [1] | SPACER (11X19X6-MM THK) | |
| 20. | 6I-3812 M | [2] | BOLT (M8X1.25X16-MM) | |
| 21. | 6V-5217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 22. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 23. | 6V-6317 M | [1] | BOLT (M10X1.5X20-MM) | |
| 24. | 6V-8836 M | [1] | BOLT (M6X1X14-MM) | |
| 25. | 8C-6364 M | [1] | BOLT-SOCKET HEAD (M5X0.8X14-MM) | |
| 26. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 28. | 206-6875 | [1] | CAP-TUBE | |
| 29. | 4B-4276 | [1] | WASHER (7X16X1.6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57270443
359-2092: WIRING GP-ELECTRONIC CONTROL
359-2092 WIRING GP-ELECTRONIC CONTROL
S/N MYE1-UP
PART OF 365-4046, 431-1441 ENGINE AR-COMPLETE
Type 2
FOR USE WITH MIXER ELBOW IN THE DOWNWARD POSITION
S/N MYE1-UP
PART OF 365-4046, 431-1441 ENGINE AR-COMPLETE
Type 2
FOR USE WITH MIXER ELBOW IN THE DOWNWARD POSITION
For full view, you need register
Parts for your 966K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [17] | STRAP-CABLE | |
| 2. | 4P-5918 | [1] | CLIP | |
| 3. | 7K-1181 | [9] | STRAP-CABLE | |
| 4. | 054-4984 | [2] | SPACER (10X15X8.5-MM THK) | |
| 5. | 178-1780 | [1] | CLIP | |
| 6. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| 7. | 224-9222 | [1] | BRACKET | |
| 9. | 307-1674 | [5] | SPACER (9X16X36-MM THK) | |
| 10. | 349-7801 | [1] | BRACKET | |
| 11. | 4P-8134 | [1] | CLIP (LADDER) | |
| 12. | 443-6974 CY | [1] | HARNESS AS-ENGINE | |
| 13. | 131-0353 M | [2] | STUD (M8X1.25X82.75-MM) | |
| 14. | 132-5789 | [1] | CLIP (LADDER) | |
| 15. | 178-3336 M | [5] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 16. | 9N-4685 | [1] | BLOCK | |
| 17. | 175-7141 M | [1] | NUT-HEX FLANGE (M10X1.5-THD) | |
| 18. | 303-4649 | [1] | CLIP (LADDER) | |
| 19. | 132-7551 | [1] | SPACER (11X19X6-MM THK) | |
| 20. | 6I-3812 M | [2] | BOLT (M8X1.25X16-MM) | |
| 21. | 6V-5217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 22. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 23. | 6V-6317 M | [1] | BOLT (M10X1.5X20-MM) | |
| 24. | 6V-8836 M | [1] | BOLT (M6X1X14-MM) | |
| 25. | 8C-6364 M | [1] | BOLT-SOCKET HEAD (M5X0.8X14-MM) | |
| 26. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 28. | 206-6875 | [1] | CAP-TUBE | |
| 29. | 4B-4276 | [1] | WASHER (7X16X1.6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57270444
313-9686: WIRING GP-ENGINE
For full view, you need register
Parts for your 966K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [7] | STRAP-CABLE | |
| 3. | 197-6453 | [1] | BRACKET AS | |
| 4. | 313-9727 | [1] | HARNESS AS-ENGINE | |
| 110-6845 | [2] | PLUG AS-CONNECTOR (40-PIN) | ||
| (EACH INCLUDES) | ||||
| 110-6844 | [1] | SEAL | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8T-8737 | [65] | PLUG-SEAL | ||
| 113-0580 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 106-4155 | [1] | KIT-RETAINING BOLT | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 160-2245 G | SLEEVE-ABRASION (15-IN) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [104] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [104] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 9X-3401 | [39] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [39] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 230-4011 | [3] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 274-3780 | [1] | CAP-SEAL | ||
| 5. | 325-1872 | [1] | COVER AS | |
| 6. | 130-5300 | [3] | CLIP | |
| 7. | 132-5789 | [3] | CLIP (LADDER) | |
| 8. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 9. | 326-4514 | [4] | TIE-CABLE | |
| 10. | 277-1873 | [1] | CLIP (LADDER) | |
| 11. | 332-0013 | [5] | CLIP (LOOP) | |
| 12. | 4P-7581 | [1] | CLIP (LADDER) | |
| 13. | 4S-1962 | [2] | CLIP (LOOP) | |
| 15. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 18. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 20. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#SEBP57270445
313-9686: WIRING GP-ENGINE
For full view, you need register
Parts for your 966K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [7] | STRAP-CABLE | |
| 3. | 197-6453 | [1] | BRACKET AS | |
| 4. | 313-9727 | [1] | HARNESS AS-ENGINE | |
| 110-6845 | [2] | PLUG AS-CONNECTOR (40-PIN) | ||
| (EACH INCLUDES) | ||||
| 110-6844 | [1] | SEAL | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8T-8737 | [65] | PLUG-SEAL | ||
| 113-0580 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 106-4155 | [1] | KIT-RETAINING BOLT | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 160-2245 G | SLEEVE-ABRASION (15-IN) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [104] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [104] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 9X-3401 | [39] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [39] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 230-4011 | [3] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 274-3780 | [1] | CAP-SEAL | ||
| 5. | 325-1872 | [1] | COVER AS | |
| 6. | 130-5300 | [3] | CLIP | |
| 7. | 132-5789 | [3] | CLIP (LADDER) | |
| 8. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 9. | 326-4514 | [4] | TIE-CABLE | |
| 10. | 277-1873 | [1] | CLIP (LADDER) | |
| 11. | 332-0013 | [5] | CLIP (LOOP) | |
| 12. | 4P-7581 | [1] | CLIP (LADDER) | |
| 13. | 4S-1962 | [2] | CLIP (LOOP) | |
| 15. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 CM | [5] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4137 CM | [2] | BOLT (M10X1.5X20-MM) | |
| 18. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 20. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#SEBP57270446
443-6975: WIRING GP-ENGINE
For full view, you need register
Parts for your 966K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | COVER | ||
| 2. | 443-6974 Y | [1] | HARNESS AS-ENGINE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57270447
380-1132: WIRING GP-MACHINE
For full view, you need register
Parts for your 966K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 2. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 3. | 346-9376 | [1] | ANTENNA AS | |
| 355-1213 | [1] | PLUG | ||
| 361-1045 | [1] | NUT-SPECIAL (5/8-18-THD) | ||
| 4. | 351-3454 | [1] | CABLE AS | |
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 289-3195 E | CONDUIT (325-CM) | |||
| 5. | 351-3455 | [1] | CABLE AS (REVERSE POLARITY) | |
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 289-3195 E | CONDUIT (277-CM) | |||
| 6. | 351-8492 Y | [1] | CONTROL GP-UNPROGRAMMED (PRODUCT LINK 523) | |
| 7. | 121-9870 M | [4] | SCREW-MACHINE (M6X1X40-MM) | |
| 8. | 2D-2751 | [2] | GROMMET | |
| 9. | 3S-2093 | [18] | STRAP-CABLE | |
| 10. | 7K-1181 | [4] | STRAP-CABLE | |
| 11. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57270448
440-2317: WIRING GP-PAYLOAD CONTROL
440-2317 WIRING GP-PAYLOAD CONTROL
S/N PBG1056-UP
PART OF 396-1591 CONTROL AR-AUTODIG, 328-8749 MONITOR AR-PAYLOAD
S/N PBG1056-UP
PART OF 396-1591 CONTROL AR-AUTODIG, 328-8749 MONITOR AR-PAYLOAD
For full view, you need register
Parts for your 966K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125-8534 | [1] | PLATE AS | |
| 2. | 349-1178 | [2] | SENSOR-PRESSURE (AUTODIG)(PAYLOAD CONTROL) | |
| 3. | 439-8951 | [1] | HARNESS AS-SENSOR | |
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 237-0228 | [2] | RECEPTACLE AS-CONNECTOR | ||
| 4. | 440-0607 | [1] | HARNESS AS-SENSOR | |
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 237-0228 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 5. | 440-8415 | [1] | BRACKET | |
| 6. | 130-5300 | [2] | CLIP | |
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 165-4931 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8077 | [1] | ELBOW | ||
| 9. | 3J-1907 | [2] | SEAL-O-RING | |
| 10. | 4P-7428 | [1] | CLIP (LADDER) | |
| 11. | 4P-7429 | [4] | CLIP (LADDER) | |
| 12. | 4P-7581 | [1] | CLIP (LADDER) | |
| 13. | 7K-1181 | [16] | STRAP-CABLE | |
| 14. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 16. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 17. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
#SEBP57270449
354-7405: WIRING GP-POSITIONER
354-7405 WIRING GP-POSITIONER
S/N PBG1-UP
PART OF 366-8095 CONVERSION AR-CERTIFICATION
S/N PBG1-UP
PART OF 366-8095 CONVERSION AR-CERTIFICATION
For full view, you need register
Parts for your 966K WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-7320 | [2] | FILM-STRIPE (RED, WHITE) | |
| 2. | 6C-7875 | [8] | RIVET-POP | |
| 3. | 7K-1181 | [9] | STRAP-CABLE | |
| 4. | 109-6502 | [2] | PANEL-REFLECTOR | |
| 5. | 115-5774 | [2] | LAMP AS (24-VOLT) | |
| 6. | 124-4131 | [1] | FILM-REFLECTOR (RED, WHITE STRIPES) | |
| 7. | 212-3924 Y | [2] | LAMP GP-MARKER (24-VOLT) | |
| 8. | 272-4869 | [1] | PLATE | |
| 9. | 354-7601 | [1] | GUARD AS | |
| 7T-1099 | [2] | LINK | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-8874 M | [2] | NUT-WELD (M5X0.8-THD) | ||
| 10. | 354-7602 | [1] | GUARD AS | |
| 7T-1099 | [3] | LINK | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-8874 M | [2] | NUT-WELD (M5X0.8-THD) | ||
| 11. | 354-7603 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 9R-2821 M | [2] | BOSS (M10X1.5X15-MM) | ||
| 12. | 354-7604 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 13. | 354-7605 | [1] | HARNESS AS-LIGHTING | |
| 6C-7157 | [1] | HOUSING-RECEPTACLE | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 230-5008 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 264-7031 | [1] | SEAL-CONNECTOR | ||
| 14. | 354-7606 Y | [1] | HARNESS AS-LIGHTING (BUCKET POSITION) | |
| 15. | 130-5300 | [2] | CLIP | |
| 16. | 4P-7581 | [2] | CLIP (LADDER) | |
| 17. | 6V-7697 | [2] | SCREW-MACHINE (8-32X1.25-IN) | |
| 18. | 7X-7729 | [10] | WASHER (11X25X3-MM THK) | |
| 19. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 21. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4137 M | [9] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 24. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 25. | 8T-7934 | [2] | WASHER-HARD (11X21X5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
