HYDRAULIC SYSTEM
ACCUMULATOR GPCONTROL GP-RIDE
CONTROL GP-FAN
CYLINDER GP
HYDRAULIC SYSTEM
ACCUMULATOR GP
#SEBP57270760
362-8659: ACCUMULATOR GP-RIDE CONTROL
362-8659 ACCUMULATOR GP-RIDE CONTROL -CHARGED
S/N PBG798-UP
PART OF 394-8308 CONTROL & LINES GP-RIDE
FIELD REPLACEMENT ORDER @@@@@390-4251@@@@@
S/N PBG798-UP
PART OF 394-8308 CONTROL & LINES GP-RIDE
FIELD REPLACEMENT ORDER @@@@@390-4251@@@@@
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 217-0162 | [1] | CAP | |
| 2. | 222-3785 M | [1] | SCREW-VENT (M8X1.5-THD) | |
| 3. | 224-7262 | [1] | SEAL-O-RING | |
| 4. | 222-5765 | [1] | SEAL-RING | |
| 5. | 303-5977 | [1] | FILM-INFORMATION (HYD ACCUMULATOR, READ OMM) | |
| THE FOLLOWING TOOLS ARE REQUIRED FOR SERVICE OF ACCUMULATOR | ||||
| 390-4085 F | [1] | TOOL-INSTALLATION (ACCUMULATOR PISTON) | ||
| 390-4088 F | [1] | TOOL-SEAL (ACCUMULATOR)(RIDE CONTROL) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 390-4082 | [1] | KIT-PISTON (ACCUMULATOR)(RIDE CONTROL) | ||
| (KIT INCLUDES PISTON, O-RINGS, SCREW, SEAL-RING, PROFILE RINGS, GUIDE RINGS & OIL WIPING RING) | ||||
| [1] | KIT-SEAL (ACCUMULATOR)(RIDE CONTROL) | |||
| (KIT INCLUDES O-RINGS, SCREW, SEAL-RING, PROFILE RINGS, GUIDE RINGS & OIL WIPING RING) | ||||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP57270761
390-4251: ACCUMULATOR GP-RIDE CONTROL
390-4251 ACCUMULATOR GP-RIDE CONTROL -UNCHARGED
S/N PBG1-UP
PART OF 391-8895 KIT-RIDE CONTROL
S/N PBG1-UP
PART OF 391-8895 KIT-RIDE CONTROL
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 303-5977 | [1] | FILM-INFORMATION (HYD ACCUMULATOR, READ OMM) | |
| 2. | 217-0162 | [1] | CAP | |
| 3. | 222-3785 M | [1] | SCREW-VENT (M8X1.5-THD) | |
| 4. | 224-7262 | [1] | SEAL-O-RING | |
| 5. | 222-5765 | [1] | SEAL-RING | |
| THE FOLLOWING TOOLS ARE REQUIRED FOR SERVICE OF ACCUMULATOR | ||||
| 390-4085 F | [1] | TOOL-INSTALLATION (ACCUMULATOR PISTON) | ||
| 390-4088 F | [1] | TOOL-SEAL (ACCUMULATOR) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 390-4082 | [1] | KIT-PISTON (ACCUMULATOR) | ||
| (KIT INCLUDES PISTON, O-RINGS, SCREW, SEAL-RING, PROFILE RINGS, GUIDE RINGS & OIL WIPING RING) | ||||
| [1] | KIT-SEAL (ACCUMULATOR) | |||
| (KIT INCLUDES O-RINGS, SCREW, SEAL-RING, PROFILE RINGS, GUIDE RINGS & OIL WIPING RING) | ||||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP57270762
315-5960: CONTROL & LINES GP-RIDE
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 346-8562 I | [1] | HOSE AS | |
| 2. | 353-7057 Y | [1] | ACCUMULATOR & MTG GP-RIDE CONT (CHARGED) | |
| 3. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 4. | 5P-7468 | [1] | CLIP (SLOT) | |
| 5. | 5P-7469 | [1] | CLIP (TAB) | |
| 6. | 5P-8444 | [1] | GROMMET (37-MM ID) | |
| 7. | 6V-0400 | [2] | FLANGE-HALF | |
| 8. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 9. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 10. | 8T-4223 | [13] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 8T-4956 M | [1] | BOLT (M12X1.75X35-MM) | |
| 12. | 8T-5041 M | [4] | BOLT (M12X1.75X120-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57270763
394-8308: CONTROL & LINES GP-RIDE
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 338-3103 | [1] | BLOCK | |
| 2. | 346-8562 I | [1] | HOSE AS | |
| 3. | 362-8659 Y | [1] | ACCUMULATOR GP-RIDE CONTROL (CHARGED) | |
| 4. | 394-3954 | [1] | BRACKET | |
| 5. | 394-3955 | [1] | BRACKET | |
| 6. | 039-8557 | [2] | WASHER (13X26X6-MM THK) | |
| 7. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 8. | 5P-7468 | [1] | CLIP (SLOT) | |
| 9. | 5P-7469 | [1] | CLIP (TAB) | |
| 10. | 5P-8444 | [1] | GROMMET (37-MM ID) | |
| 11. | 6V-0400 | [2] | FLANGE-HALF | |
| 12. | 8T-4139 M | [7] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 14. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 15. | 8T-4223 | [15] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 17. | 8T-5041 M | [4] | BOLT (M12X1.75X120-MM) | |
| 18. | 134-2636 | [1] | BRACKET AS | |
| 19. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57270764
320-8895: CONTROL AR-FAN
320-8895 CONTROL AR-FAN
S/N PBG1-UP
S/N PBG1-UP
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 334-5122 Y | [1] | FAN GP-SUCTION (VARIABLE PITCH FAN) | ||
| 384-3416 Y | [1] | LINES GP-AIR | ||
| 346-1067 Y | [1] | RELAY GP (VARIABLE PITCH FAN) | ||
| 328-2098 Y | [1] | WIRING GP-CHASSIS | ||
| 364-8278 Y | [1] | FILM GP-INTERNATIONAL | ||
| 225-4131 | [2] | FILM-WARNING (FLYING DEBRIS, STAY BACK, INTL) | ||
| 335-5522 | [1] | PLATE AS-MOUNTING | ||
| 366-4953 | [1] | BRACKET AS | ||
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57270765
387-1355: CONTROL AR-FAN
387-1355 CONTROL AR-FAN
S/N PBG1-UP
KIT PROVIDES VARIABLE PITCH FAN SYSTEM FOR TT380, TT517, AND TT364 MEDIUM WHEEL LOADER.
S/N PBG1-UP
KIT PROVIDES VARIABLE PITCH FAN SYSTEM FOR TT380, TT517, AND TT364 MEDIUM WHEEL LOADER.
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 365-8776 Y | [1] | HARNESS AS-CHASSIS (MAIN) | ||
| 389-6081 Y | [1] | PUMP & MTG GP-HYDRAULIC FAN (VARIABLE PITCH FAN AIR PUMP) | ||
| 188-2461 Y | [1] | VALVE GP-SOLENOID | ||
| 308-1190 | [1] | ADAPTER | ||
| 377-9582 | [1] | ADAPTER-ELBOW | ||
| 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | ||
| 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | ||
| 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | ||
| 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | ||
| 8T-4908 M | [18] | BOLT (M8X1.25X25-MM) | ||
| 8T-4970 M | [2] | BOLT (M6X1X14-MM) | ||
| 099-3649 M | [3] | BOLT (M8X1.25X40-MM) | ||
| 170-5632 M | [2] | BOLT (M4X0.7X16-MM) | ||
| 366-4953 | [1] | BRACKET AS | ||
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 367-3269 | [1] | BRACKET AS | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 382-1839 | [1] | BRACKET AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 9X-2032 M | [2] | NUT-WELD (M4X0.7-THD) | ||
| 384-3723 | [1] | BRACKET AS | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 4H-6112 | [1] | BREATHER (AIR/HYDRAULIC CYLINDER) | ||
| 211-8071 | [1] | CAP-PROTECTIVE | ||
| 1P-4278 | [1] | CLAMP-HOSE | ||
| 130-5300 | [5] | CLIP | ||
| 132-5789 | [1] | CLIP (LADDER) | ||
| 202-2762 | [4] | CLIP (LOOP) | ||
| 148-8327 | [2] | CONNECTOR AS | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8637 | [1] | CONNECTOR | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 148-8368 | [1] | ELBOW AS | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8627 | [1] | ELBOW | ||
| 148-8390 | [1] | ELBOW AS | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 6V-8626 | [1] | ELBOW | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 377-9564 | [3] | ELBOW AS | ||
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 377-9563 | [1] | ADAPTER-ELBOW | ||
| 377-9581 | [1] | ELBOW AS | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 377-9577 | [1] | ADAPTER-ELBOW | ||
| 307-7312 | [1] | FAN AS (12-BLADE) | ||
| 324-7872 | [1] | KIT-BLADE | ||
| 225-4130 | [2] | FILM-WARNING (FLYING DEBRIS, STAY BACK, U.S.) | ||
| 225-4131 | [2] | FILM-WARNING (FLYING DEBRIS, STAY BACK, INTL) | ||
| 363-7105 | [1] | GROMMET | ||
| 375-4804 I | [1] | HOSE AS | ||
| 382-2008 I | [1] | HOSE AS | ||
| 384-3509 | [1] | HOSE AS | ||
| 8T-4132 M | [1] | NUT (M16X2-THD) | ||
| 8T-4133 M | [1] | NUT (M10X1.5-THD) | ||
| 248-2841 | [1] | RELAY AS (24-VOLT) | ||
| 206-2423 | [1] | SADDLE-MOUNTING | ||
| 7K-1181 | [9] | STRAP-CABLE | ||
| 178-3620 | [3] | STRAP-DUAL CLAMP | ||
| 333-1350 | [1] | SUPPORT AS-MOTOR | ||
| 5G-6973 M | [2] | LUG (M10X1.5-THD) | ||
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [10] | NUT-WELD (M12X1.75-THD) | ||
| 312-6458 E | TAPE-REFLECTIVE (12-CM) | |||
| 7X-7898 | [14] | TRIM | ||
| 335-1067 | [1] | TUBE AS | ||
| 351-5745 | [1] | TUBE AS | ||
| 351-5746 | [1] | TUBE AS | ||
| 7X-7729 | [4] | WASHER (11X25X3-MM THK) | ||
| 8T-3016 | [2] | WASHER (5.3X10X1-MM THK) | ||
| 7X-0515 | [1] | WASHER-HARD (17X35X5-MM THK) | ||
| 7X-0579 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 8T-4224 | [18] | WASHER-HARD (8.8X16X2-MM THK) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57270766
350-2880: CONTROL AR-HIGH LIFT
350-2880 CONTROL AR-HIGH LIFT
S/N PBG1-UP
CANNOT BE USED WITH 350-3566 CONTROL AR-HIGH LIFT
S/N PBG1-UP
CANNOT BE USED WITH 350-3566 CONTROL AR-HIGH LIFT
For full view, you need register
#SEBP57270767
350-3566: CONTROL AR-HIGH LIFT
350-3566 CONTROL AR-HIGH LIFT -HIGH LIFT MACHINES, 3-VALVE
S/N PBG1-UP
CANNOT BE USED WITH 350-2880 CONTROL AR-HIGH LIFT
S/N PBG1-UP
CANNOT BE USED WITH 350-2880 CONTROL AR-HIGH LIFT
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS#SEBP57270768
220-0525: CYLINDER GP-BUCKET
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-0948 | [3] | FITTING-GREASE | |
| 2. | 370-4116 | [1] | PIN | |
| 3. | 145-0653 | [4] | PLUG | |
| 4. | 370-4118 | [1] | ROD AS | |
| 5. | 370-4119 | [1] | CYLINDER AS | |
| 6. | 370-4120 | [1] | HEAD | |
| 7. | 370-4121 | [1] | RING-DAMPER | |
| 8. | 370-4122 | [1] | PISTON | |
| 9. | 370-4123 | [4] | RING | |
| 10. | 169-3103 | [4] | BUSHING | |
| 11. | 370-4134 | [6] | VALVE-CHECK | |
| AVAILABLE REPAIR KIT(S): | ||||
| 370-4117 | [1] | KIT-SEAL | ||
| (INCLUDES WIPER SEAL, ROD SEAL, O-RINGS, BACKUP RINGS & PISTON RINGS) | ||||
#SEBP57270769
384-5321: CYLINDER GP-BUCKET
384-5321 CYLINDER GP-BUCKET
S/N PBG1-UP
127-MM (5.0-IN) BORE X 473-MM (18.63-IN) STROKE
PART OF 449-4380 BUCKET GP-MATERIAL HANDLING
S/N PBG1-UP
127-MM (5.0-IN) BORE X 473-MM (18.63-IN) STROKE
PART OF 449-4380 BUCKET GP-MATERIAL HANDLING
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4958 J | [1] | RING-WEAR | |
| 2. | 9X-7264 J | [1] | SEAL AS | |
| 3. | 108-6054 | [1] | LOCKNUT | |
| 4. | 113-0626 | [1] | HEAD | |
| 5. | 166-7430 J | [2] | RING-PISTON | |
| 6. | 167-2200 J | [1] | SEAL AS | |
| 7. | 421-4024 J | [1] | SEAL-U-CUP | |
| 8. | 187-9453 | [4] | VALVE-CHECK | |
| 9. | 189-2482 | [1] | ROD AS-PISTON | |
| 10. | 189-2490 | [2] | ORIFICE | |
| 11. | 231-3538 J | [1] | SEAL-WIPER | |
| 12. | 349-5880 J | [4] | SEAL-O-RING | |
| 13. | 466-9388 | [1] | TUBE AS | |
| 14. | 466-9392 | [1] | PISTON AS | |
| 15. | 466-9394 | [1] | PISTON AS | |
| 16. | 010-2570 | [1] | SETSCREW (1/4-20X0.375-IN) | |
| 17. | 2K-4096 J | [1] | RING-BACKUP | |
| 18. | 5F-3144 J | [1] | SEAL-O-RING | |
| 19. | 7K-9639 | [1] | BUSHING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 470-0323 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER)(BUCKET) | ||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
