382-0802 FILM GP -WASTE HANDLER S/N BJ61-UP PART OF 424-4084 CONFIGURATION AR 966H WHEEL LOADER

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

0. 382-0802 FILM GP

GASKET & SEAL KITS

1. 326-8631 KIT-GASKET
2. 466-9956 KIT-GASKET
3. 469-8464 KIT-GASKET
4. 473-2595 KIT-GASKET

LINES GP-DIAGNOSTIC

5. 388-2454 LINES GP-D

CHARTS & FILMS

6. 393-8157 PLATE & FI
7. 393-8858 PLATE & FI
8. 393-8865 PLATE & FI

SERVICE CENTER GP

9. 392-6805 SERVICE CE
0. INFORMATION

WHEEL LOADER 966H WHEEL LOADER BJ6
966H Wheel Loader BJ600001-UP (MACHINE) POWERED BY C11 Engine SEBP5792 966H BJ6 (2013)

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

297-0938 FILM GP

382-0802 FILM GP

393-8157 PLATE & FILM GP

393-8858 PLATE & FILM GP

393-8865 PLATE & FILM GP

#SEBP57920920

382-0802: FILM GP

FILM GP

382-0802 FILM GP -WASTE HANDLER
S/N BJ61-UP
PART OF 424-4084 CONFIGURATION AR

i07090308 SEBP5792

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	381-9075	[2]	FILM-IDENTIFICATION (WASTE HANDLER)

#SEBP57920921

326-8631: KIT-GASKET

KIT-GASKET

326-8631 KIT-GASKET -WATER PUMP
S/N BJ61-UP
KIT INCLUDES GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.
FOR USE WITH @@@@@394-6485@@@@@

i05719352 SEBP5792

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
229-8810	[1]	SEAL
224-2675	[1]	SEAL
6V-3251	[2]	SEAL-O-RING
6V-5063	[2]	SEAL-O-RING
6V-7350	[1]	SEAL-O-RING
7L-6580	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP57920922

466-9956: KIT-GASKET

KIT-GASKET

466-9956 KIT-GASKET -SINGLE CYLINDER HEAD
S/N BJ61-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@394-6485@@@@@

i06187459 SEBP5792

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
9Y-1758	[1]	GASKET
197-8418	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
221-9392	[1]	GASKET
283-2238	[6]	GASKET
230-3518	[1]	GASKET-MANIFOLD
274-6851	[1]	GASKET-TURBOCHARGER
212-7728	[10]	ISOLATOR AS
9X-6620 M	[4]	LOCKNUT (M10X1.5-THD)
224-2675	[1]	SEAL
224-6361	[1]	SEAL
227-5075	[1]	SEAL
272-0389	[1]	SEAL
321-5639	[1]	SEAL
3S-9643	[1]	SEAL-LIP TYPE (REGULATOR HOUSING)
5P-5598	[1]	SEAL-O-RING
6V-5063	[7]	SEAL-O-RING
6V-6353	[1]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
9X-7380	[1]	SEAL-O-RING
6V-6609	[5]	SEAL-O-RING
6V-9027	[2]	SEAL-O-RING
7L-6580	[2]	SEAL-O-RING
8C-3089	[1]	SEAL-O-RING
124-1858	[1]	SEAL-O-RING
214-7566	[4]	SEAL-O-RING
214-7568	[11]	SEAL-O-RING
225-6948	[1]	SEAL-O-RING
228-7090	[2]	SEAL-O-RING
238-5080	[1]	SEAL-O-RING
238-5081	[1]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
229-5711	[1]	SEAL-VALVE COVER
9X-8281 M	[4]	STUD-TAPERLOCK (M10X1.5X45-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP57920923

469-8464: KIT-GASKET

KIT-GASKET

469-8464 KIT-GASKET
S/N BJ61-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS
FOR USE WITH @@@@@394-6485@@@@@

i06095690 SEBP5792

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	217-3674	[14]	FASTENER AS
2.	209-7309	[3]	PLUG
3.	217-3673	[1]	SEAL-ISOLATION
4.	3E-6788	[1]	SEAL-O-RING
5.	3J-7354	[1]	SEAL-O-RING
6.	5P-8211	[1]	SEAL-O-RING
7.	6V-3251	[1]	SEAL-O-RING
8.	6V-9027	[1]	SEAL-O-RING
9.	8J-4351	[1]	SEAL-O-RING
10.	061-9455	[3]	SEAL-O-RING
11.	131-3718	[1]	SEAL-O-RING
12.	214-7566	[5]	SEAL-O-RING
13.	214-7568	[2]	SEAL-O-RING
14.	228-4947	[1]	SEAL-O-RING
15.	238-5080	[3]	SEAL-O-RING
16.	279-2252	[1]	SEAL-O-RING
17.	228-7089	[1]	SEAL-O-RING
18.	228-7090	[1]	SEAL-O-RING
19.	6L-2609	[1]	SEAL-RUBBER

			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

			HTTP://DEALER.CAT.COM/RELATED

#SEBP57920924

473-2595: KIT-GASKET

KIT-GASKET

473-2595 KIT-GASKET -SINGLE CYLINDER HEAD
S/N TXE1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP

i06249617 SEBP5792

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
9Y-1758	[1]	GASKET (CRANKCASE BREATHER)
197-8418	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
221-9392	[1]	GASKET (CYLINDER HEAD)
283-2238	[6]	GASKET (EXHAUST MANIFOLD)
230-3518	[1]	GASKET-MANIFOLD
274-6851	[1]	GASKET-TURBOCHARGER
212-7728	[10]	ISOLATOR AS
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
224-6361	[1]	SEAL
227-5075	[1]	SEAL
272-0389	[1]	SEAL
321-5639	[1]	SEAL
3S-9643	[1]	SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)
5P-5598	[1]	SEAL-O-RING
6V-5063	[7]	SEAL-O-RING
6V-6353	[1]	SEAL-O-RING
6V-6609	[5]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
7L-6580	[2]	SEAL-O-RING
8C-3089	[1]	SEAL-O-RING
9X-7380	[1]	SEAL-O-RING
214-7566	[4]	SEAL-O-RING
214-7568	[12]	SEAL-O-RING
225-6948	[1]	SEAL-O-RING
228-7089	[1]	SEAL-O-RING
228-7090	[1]	SEAL-O-RING
238-5080	[3]	SEAL-O-RING
238-5081	[1]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
229-5711	[1]	SEAL-VALVE COVER
9X-8281 M	[4]	STUD-TAPERLOCK (M10X1.5X45-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP57920925

388-2454: LINES GP-DIAGNOSTIC

LINES GP-DIAGNOSTIC

388-2454 LINES GP-DIAGNOSTIC
S/N BJ61-UP
PART OF 393-8812 HYDRAULIC AR

i05259648 SEBP5792

3882454 LINES GP-DIAGNOSTIC Parts scheme

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0852	[11]	CAP-DUST
2.	7K-1181	[2]	STRAP-CABLE
3.	111-4836	[2]	CLIP
4.	127-9323	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	185-6250	[11]	FITTING AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
6.	204-2281	[2]	STRAP-CABLE
7.	204-8000	[1]	MOUNTING-CABLE TIE
8.	256-0854	[1]	PLATE
9.	329-6879	[1]	HOSE AS (BRAKE PRESSURE)
10.	329-6881	[1]	HOSE AS (TORQUE CONVERTER OUTLET PRESS)
11.	329-6882	[1]	HOSE AS (TRANSMISSION LUBRICATION PRESS)
12.	329-6884	[1]	HOSE AS (STEERING PUMP)
13.	329-6887	[1]	HOSE AS (XMSN CLUTCH 2, FORWARD PRESS)
14.	148-8325	[1]	CONNECTOR AS
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8641	[1]	CONNECTOR
15.	148-8368	[7]	ELBOW AS (90-DEG)
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8627	[1]	ELBOW
16.	148-8351	[11]	ELBOW AS (90-DEG)
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	6V-9849	[1]	ELBOW
17.	150-3033	[1]	ELBOW AS (45-DEG)
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	8T-0164	[1]	ELBOW
18.	170-4735	[11]	RING-RETAINING
19.	2L-8509	[11]	RING-LOCK
20.	329-6880	[1]	HOSE AS (TORQUE CONVERTER INLET PRESS)
21.	329-6886	[1]	HOSE AS (XMSN CLUTCH 1, REVERSE PRESS)
22.	329-6888	[1]	HOSE AS (XMSN CLUTCH 3, 4TH GEAR PRESS)
23.	329-6889	[1]	HOSE AS (XMSN CLUTCH 4, 3RD GEAR PRESS)
24.	329-6890	[1]	HOSE AS (XMSN CLUTCH 5, 2ND GEAR PRESS)
25.	329-6891	[1]	HOSE AS (XMSN CLUTCH 6, 1ST GEAR PRESS)
26.	4J-5477	[11]	SEAL-O-RING
27.	5P-7854	[1]	CLIP
28.	6V-1889	[1]	CLIP (LOOP)(LOOP)
29.	7X-7729	[1]	WASHER (11X25X3-MM THK)
30.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
32.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
33.	206-2725 E		GUARD-HOSE (30-CM)
33A.	206-2725 E		GUARD-HOSE (25-CM)
34.	7Y-5074 E		GUARD-HOSE (30-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP57920926

393-8157: PLATE & FILM GP

PLATE & FILM GP

393-8157 PLATE & FILM GP
S/N TXE1-UP
PART OF 394-0447 ENGINE AR-CORE

i05299341 SEBP5792

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3N-3790	[1]	PLATE-SERIAL NUMBER (ENGINE)
2.	297-8007	[1]	PLATE-IDENTIFICATION (CAT C11 ACERT)
3.	8L-8413	[1]	STRAP-CABLE (WHITE)
4.	293-9659	[2]	FILM-WARNING (UNIVERSAL, READ OMM)

#SEBP57920927

393-8858: PLATE & FILM GP

PLATE & FILM GP

393-8858 PLATE & FILM GP
S/N BJ61-UP
PART OF 393-8814 CHASSIS AR

i05259646 SEBP5792

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
297-0938 Y	[1]	FILM GP
		(SAFETY FILM IS 30MM LOWER THAN THE CTWT GP TOP SURFACE)
110-6393	[1]	PLATE-INSTRUCTION (AIR CONDITIONER)
		(STAMP WITH REFRIGERANT AMOUNT OF 1.7KG, & AFFIX PLATE INSIDE CAB ON THE RIGHT SIDE, BEHIND DOOR BELOW WINDOW,
		HORIZONTAL SURFACE, NEXT TO SOFTWARE IDENTIFICATION TAGS)
239-6986	[1]	PLATE-SERIAL NUMBER (MACHINE)
		(ON OUTER SURFACE OF NON ENGINE END FRAME ASSEMBLY LH SIDE PLATE. MEASURING FORM THE LIFT CYLINDER PIN (Y-PIN)
		CENTERLINE, PLATE FRONT EDGE ABOUT 90MM TOWARDS THE REAR OF THE MACHINE & TOP EDGE ABOUT 15MM BELOW THE LIFT CYLINDER
		PIN (Y-PIN) CENTERLINE)
3N-3790 A	[1]	PLATE-SERIAL NUMBER (ENGINE)
		(ON LOWER RH REAR CORNER OF CYLINDER BLOCK APPROX 56-MM FROM REAR OF BLOCK TO LH SIDE OF PLATE & 135-MM FROM BOTTOM
		FACE OF BLOCK TO BOTTOM OF PLATE)
1G-1883 B	[48]	CAP-GREASE
		(USE AS NEEDED BASED ON MACHINE CONFIGURATION)
455-1084	[1]	FILM-IDENTIFICATION (CAT)
		(INSIDE DOOR ON THE LH OF FENDER)
1P-2807	[2]	FILM-IDENTIFICATION (LIFT EYE LOCATION)
		(ONE ON EACH OUTER SURFACE OF NON ENGINE END FRAME ASSEMBLYSIDE PLATE. NEXT TO THE FRONT LIFTING HOLE))
5P-1175	[1]	FILM-IDENTIFICATION (ENGINE OIL FILL)
		(ATTACH TO CRANKCASE OIL FILTER CAP)
7X-3229	[2]	FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)
		(ONE EACH AT REAR LIFT & TIEDOWN EYES. TO THE RIGHT & CENTERED ON THE LIFT EYE HOLE))
158-7864	[1]	FILM-IDENTIFICATION (HYDRAULIC OIL)
		(FORWARD OF & ABOVE THE HYDRAULIC TANK SIGHT GAGE ON TANK SURFACE)
374-9526	[1]	FILM-IDENTIFICATION (REMOTE PRESSURE TAPS)
		(ON INSIDE SURFACE OF DIAGNOSTIC CONNECTOR DOOR ON THE HYDRAULIC SERVICE CENTER)
7X-7644	[2]	FILM-IDENTIFICATION (TIE-DOWN)
		(ONE ON EACH OUTER SURFACE OF NON ENGINE END FRAME SIDE PLATE. NEXT TO THE FRONT TIE DOWN EYE)
134-7258	[1]	FILM-INFORMATION (EXTENDED LIFE COOLANT)
		(NEXT TO RADIATOR FILL CAP)
146-6747	[2]	FILM-INFORMATION (24-VOLT)
		(ONE FILM ON TOP AT TOP RIGHT HAND CORNER OF BOX GP-BATTERY COVER, & ONE FILM ON THE VERTICAL SURFACE NEXT TO THE
		FENDER PLATFORM COMPARTMENT DOOR)
148-3587	[1]	FILM-INFORMATION (TRANSMISSION OIL LEVEL)
		(ON LEFT SIDE OF TRANSMISSION SIGHT GAUGE)
	[1]	FILM-INFORMATION (ROPS, FOPS, READ OMM)
		(ON THE TRIANGLE PLATE OUTSIDE OF CAB ON LEFT SIDE ACCESS DOOR)
124-2456	[2]	FILM-INSTRUCTION (NO STEP)
		(ON TOP OF HOOD BEHIND CAB ON EACH SIDE)
	[1]	FILM-INSTRUCTION (MACHINE MAINTENANCE)
		(ON INSIDE SURFACE OF HYDRAULIC SERVICE CENTER ACCESS DOOR)
	[1]	FILM-INSTRUCTION (GREASE PRESSURE PORTS)
		(ON RH SIDE OF NEEF BELOW GREASE FITTING BLOCK)
276-2331	[1]	FILM-INSTRUCTION (EXIT)
		(INSIDE THE CAB , ON GLASS OF RIGHT HAND WINDOW)
375-3598	[1]	FILM-INSTRUCTION (LUBRICATION, READ OMM)
		(ON OUTSIDE SURFACE OF HYDRAULIC SERVICE CENTER ACCESS DOOR)
219-0305	[1]	FILM-WARNING (NO WELD, NO DRILL, READ OMM)
		(ON THE TRIANGLE PLATE OUTSIDE OF CAB ON LEFT SIDE BELOW FILM ROPS/FOPS)
225-0312	[2]	FILM-WARNING (JUMP START, READ OMM, INTL)
		(ONE FILM AT TOP RIGHT HAND CORNER OF BOX GP-BATTERY COVER, & ONE FILM ON VERTICAL SURFACE NEXT TO THE FENDER PLATFORM
		COMPARTMENT DOOR)
225-4257	[2]	FILM-WARNING (HOT FLUID UNDER PRESS)
		( (ONE) NEXT TO RADIATOR FILL CAP. (ONE) NEXT TO HYD.TANK FILL CAP)
226-1240	[2]	FILM-WARNING (CRUSH HAZARD, STAY BACK, INTL)
		(ONE EACH ON OUTER SURFACE OF NON-ENGINE FRAME ASSEMBLY SIDE PLATE TO THE REAR OF FRONT FENDER)
226-1274	[1]	FILM-WARNING (CRUSH HAZARD, READ OMM, INTL)
		(TO BE BELOW CRUSH WARNING FILM ON THE ARTICULATION LOCK SIDE OF THE MACHINE)
224-8946	[1]	FILM-WARNING (NO ETHER SPRAY/AIR INTK, INTL)
		(NEXT TO ENGINE AIR INTAKE ON TOP OF SUPPORT BRACKET)
227-7391	[1]	FILM-WARNING (SEAT BELT, INTERNATIONAL)
		(ON RH CAB POST)
228-2616	[1]	FILM-WARNING (UNIVERSAL, READ OMM)
		(INSIDE CAB ON SIDE SURFACE ON FRONT LEFTHAND POST APPROXIMATELY 900MM ABOVE CAB FLOOR)
228-9106	[1]	FILM-WARNING (HOT SURFACE, HANDS CLEAR, INTL)
		(FILM TO BE PLACED ON THE FLAT SURFACE OF THE AIR CLEANER COVER AS CLOSE AS POSSIBLE TO THE UPPER ATAAC TUBE)
236-7230	[1]	TAG-WARNING (STEERING FRAME LOCK)
		(ATTACH TO STEERING WHEEL)
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
Y		SEPARATE ILLUSTRATION

#SEBP57920928

393-8865: PLATE & FILM GP

PLATE & FILM GP

393-8865 PLATE & FILM GP
S/N BJ61-UP
CHINA

i05268868 SEBP5792

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
	[1]	FILM-INFORMATION (ROPS, FOPS, READ OMM)
		(OUTSIDE OF CAB ON LEFT SIDE ABOVE PLATFORM & REARWARD OF DOOR. LOCATION SHOULD BE IMMEDIATELY ADJACENT TO ANY
		OTHER ROPS/FOPS FILMS)
346-5282	[2]	FILM-WARNING (CRUSH HAZARD, STAY BACK)
		(DIRECTLY BELOW STANDARD ID PLATE ON LEFT SIDE OF NEEF. THIS PLATE IS FOR MACHINES BUILT IN SUZHOU, CHINA)