IMPLEMENTS
BULLDOZER GPLINES GP-GREASE
IMPLEMENTS
BULLDOZER GP
#SEBP58031150
349-3662: INSTALLATION AR-BULLDOZER
349-3662 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N AMA1-636
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
S/N AMA1-636
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D11T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-5336 | [4] | SPACER | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 3. | 6J-5985 | [2] | PIN | |
| 4. | 6J-5986 | [4] | RETAINER | |
| 5. | 9J-2365 | [2] | RETAINER | |
| 6. | 9J-2593 | [2] | PIN | |
| 7. | 9W-2939 | [2] | PIN | |
| 8. | 119-4297 Y | [1] | TRUNNION GP-BULLDOZER | |
| 9. | 130-3434 | [2] | PIN | |
| 10. | 130-3435 | [2] | RETAINER | |
| 11. | 130-3436 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 11A. | 145-8737 | [4] | BUSHING | |
| 12. | 142-2075 B | [6] | SPACER (105.1X215.9X3-MM THK) | |
| 13. | 201-3215 Y | [2] | CYLINDER & VALVE GP-LIFT | |
| 14. | 248-2227 Y | [1] | LINES GP-LIFT CYLINDER | |
| 15. | 348-1587 Y | [1] | LINES GP-TILT CYLINDER (SEMI-UNIVERSAL, UNIVERSAL) | |
| 16. | 348-2128 Y | [1] | PUSH ARM GP (SEMI-UNIVERSAL, UNIVERSAL) | |
| 17. | 7X-0381 | [8] | BOLT (7/8-9X2-IN) | |
| 18. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58031151
349-3662: INSTALLATION AR-BULLDOZER
349-3662 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N AMA637-UP
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
S/N AMA637-UP
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D11T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-5336 | [4] | SPACER | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 3. | 6J-5985 | [2] | PIN | |
| 4. | 6J-5986 | [4] | RETAINER | |
| 5. | 9J-2365 | [2] | RETAINER | |
| 6. | 9J-2593 | [2] | PIN | |
| 7. | 9W-2939 | [2] | PIN | |
| 8. | 119-4297 Y | [1] | TRUNNION GP-BULLDOZER | |
| 9. | 130-3434 | [2] | PIN | |
| 10. | 130-3435 | [2] | RETAINER | |
| 11. | 130-3436 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 11A. | 145-8737 | [4] | BUSHING | |
| 12. | 142-2075 B | [6] | SPACER (105.1X215.9X3-MM THK) | |
| 13. | 201-3215 Y | [2] | CYLINDER & VALVE GP-LIFT | |
| 14. | 248-2227 Y | [1] | LINES GP-LIFT CYLINDER | |
| 15. | 491-8163 CY | [1] | LINES GP-TILT CYLINDER | |
| 16. | 348-2128 Y | [1] | PUSH ARM GP (SEMI-UNIVERSAL, UNIVERSAL) | |
| 17. | 7X-0381 | [8] | BOLT (7/8-9X2-IN) | |
| 18. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58031152
359-0268: INSTALLATION AR-BULLDOZER
359-0268 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N AMA1-604
AUTO CARRY
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
S/N AMA1-604
AUTO CARRY
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D11T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-5336 | [4] | SPACER | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 3. | 6J-5985 | [2] | PIN | |
| 4. | 6J-5986 | [4] | RETAINER | |
| 5. | 9J-2365 | [2] | RETAINER | |
| 6. | 9J-2593 | [2] | PIN | |
| 7. | 9W-2939 | [2] | PIN | |
| 8. | 119-4297 Y | [1] | TRUNNION GP-BULLDOZER | |
| 9. | 130-3434 | [2] | PIN | |
| 10. | 130-3435 | [2] | RETAINER | |
| 11. | 130-3436 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 11A. | 145-8737 | [4] | BUSHING | |
| 12. | 142-2075 B | [6] | SPACER (105.1X215.9X3-MM THK) | |
| 13. | 248-2227 Y | [1] | LINES GP-LIFT CYLINDER | |
| 14. | 250-6732 Y | [1] | CYLINDER & VALVE GP-LIFT (AUTO CARRY, RH) | |
| 15. | 250-6733 Y | [1] | CYLINDER & VALVE GP-LIFT (AUTO CARRY, LH) | |
| 16. | 348-1587 Y | [1] | LINES GP-TILT CYLINDER (SEMI-UNIVERSAL, UNIVERSAL) | |
| 17. | 348-2128 Y | [1] | PUSH ARM GP (SEMI-UNIVERSAL, UNIVERSAL) | |
| 18. | 7X-0381 | [8] | BOLT (7/8-9X2-IN) | |
| 19. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58031153
359-0268: INSTALLATION AR-BULLDOZER
359-0268 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N AMA605-636
AUTO CARRY
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
S/N AMA605-636
AUTO CARRY
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D11T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-5336 | [4] | SPACER | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 3. | 6J-5985 | [2] | PIN | |
| 4. | 6J-5986 | [4] | RETAINER | |
| 5. | 9J-2365 | [2] | RETAINER | |
| 6. | 9J-2593 | [2] | PIN | |
| 7. | 9W-2939 | [2] | PIN | |
| 8. | 119-4297 Y | [1] | TRUNNION GP-BULLDOZER | |
| 9. | 130-3434 | [2] | PIN | |
| 10. | 130-3435 | [2] | RETAINER | |
| 11. | 130-3436 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 11A. | 145-8737 | [4] | BUSHING | |
| 12. | 142-2075 B | [6] | SPACER (105.1X215.9X3-MM THK) | |
| 13. | 248-2227 Y | [1] | LINES GP-LIFT CYLINDER | |
| 14. | 477-9336 CY | [1] | CYLINDER & VALVE GP-LIFT (BLADE LIFT) | |
| 15. | 250-6733 Y | [1] | CYLINDER & VALVE GP-LIFT (AUTO CARRY, LH) | |
| 16. | 348-1587 Y | [1] | LINES GP-TILT CYLINDER (SEMI-UNIVERSAL, UNIVERSAL) | |
| 17. | 348-2128 Y | [1] | PUSH ARM GP (SEMI-UNIVERSAL, UNIVERSAL) | |
| 18. | 7X-0381 | [8] | BOLT (7/8-9X2-IN) | |
| 19. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 20. | 431-1414 C | [1] | CABLE AS (POSITION SENSING) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3121 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58031154
359-0268: INSTALLATION AR-BULLDOZER
359-0268 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N AMA637-UP
AUTO CARRY
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
S/N AMA637-UP
AUTO CARRY
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D11T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-5336 | [4] | SPACER | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 3. | 6J-5985 | [2] | PIN | |
| 4. | 6J-5986 | [4] | RETAINER | |
| 5. | 9J-2365 | [2] | RETAINER | |
| 6. | 9J-2593 | [2] | PIN | |
| 7. | 9W-2939 | [2] | PIN | |
| 8. | 119-4297 Y | [1] | TRUNNION GP-BULLDOZER | |
| 9. | 130-3434 | [2] | PIN | |
| 10. | 130-3435 | [2] | RETAINER | |
| 11. | 130-3436 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 11A. | 145-8737 | [4] | BUSHING | |
| 12. | 142-2075 B | [6] | SPACER (105.1X215.9X3-MM THK) | |
| 13. | 248-2227 Y | [1] | LINES GP-LIFT CYLINDER | |
| 14. | 477-9336 Y | [1] | CYLINDER & VALVE GP-LIFT (BLADE LIFT) | |
| 15. | 250-6733 Y | [1] | CYLINDER & VALVE GP-LIFT (AUTO CARRY, LH) | |
| 16. | 491-8163 CY | [1] | LINES GP-TILT CYLINDER (DUAL TILT) | |
| 17. | 348-2128 Y | [1] | PUSH ARM GP (SEMI-UNIVERSAL, UNIVERSAL) | |
| 18. | 7X-0381 | [8] | BOLT (7/8-9X2-IN) | |
| 19. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 20. | 431-1414 | [1] | CABLE AS (POSITION SENSING) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3121 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58031155
477-9950: INSTALLATION AR-BULLDOZER
477-9950 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N AMA1-636
AUTO CARRY
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
S/N AMA1-636
AUTO CARRY
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D11T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-5336 | [4] | SPACER | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 4. | 5P-4017 | [1] | PLATE & FILM GP (BULLDOZER) | |
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 5. | 6J-5985 | [2] | PIN | |
| 6. | 6J-5986 | [4] | RETAINER | |
| 7. | 9J-2365 | [2] | RETAINER | |
| 8. | 9J-2593 | [2] | PIN | |
| 9. | 9W-2939 | [2] | PIN | |
| 10. | 119-4297 Y | [1] | TRUNNION GP-BULLDOZER | |
| 11. | 130-3434 | [2] | PIN | |
| 12. | 130-3435 | [2] | RETAINER | |
| 13. | 130-3436 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 13A. | 145-8737 | [4] | BUSHING | |
| 14. | 142-2075 B | [6] | SPACER (105.1X215.9X3-MM THK) | |
| 15. | 248-2227 Y | [1] | LINES GP-LIFT CYLINDER | |
| 16. | 348-1587 Y | [1] | LINES GP-TILT CYLINDER (SEMI-UNIVERSAL, UNIVERSAL) | |
| 17. | 348-2128 Y | [1] | PUSH ARM GP (SEMI-UNIVERSAL, UNIVERSAL) | |
| 18. | 431-1414 | [2] | CABLE AS (POSITION SENSING) | |
| (EACH INCLUDES) | ||||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3121 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 19. | 477-9336 Y | [2] | CYLINDER & VALVE GP-LIFT (BLADE LIFT) | |
| 20. | 7X-0381 | [8] | BOLT (7/8-9X2-IN) | |
| 21. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58031156
477-9950: INSTALLATION AR-BULLDOZER
477-9950 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N AMA637-UP
AUTO CARRY
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
S/N AMA637-UP
AUTO CARRY
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D11T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-5336 | [4] | SPACER | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 5. | 6J-5985 | [2] | PIN | |
| 6. | 6J-5986 | [4] | RETAINER | |
| 7. | 9J-2365 | [2] | RETAINER | |
| 8. | 9J-2593 | [2] | PIN | |
| 9. | 9W-2939 | [2] | PIN | |
| 10. | 119-4297 Y | [1] | TRUNNION GP-BULLDOZER | |
| 11. | 130-3434 | [2] | PIN | |
| 12. | 130-3435 | [2] | RETAINER | |
| 13. | 130-3436 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 13A. | 145-8737 | [4] | BUSHING | |
| 14. | 142-2075 B | [6] | SPACER (105.1X215.9X3-MM THK) | |
| 15. | 248-2227 Y | [1] | LINES GP-LIFT CYLINDER | |
| 16. | 491-8163 CY | [1] | LINES GP-TILT CYLINDER | |
| 17. | 348-2128 Y | [1] | PUSH ARM GP (SEMI-UNIVERSAL, UNIVERSAL) | |
| 18. | 431-1414 | [2] | CABLE AS (POSITION SENSING) | |
| (EACH INCLUDES) | ||||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3121 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 19. | 477-9336 Y | [2] | CYLINDER & VALVE GP-LIFT (BLADE LIFT) | |
| 20. | 7X-0381 | [8] | BOLT (7/8-9X2-IN) | |
| 21. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58031157
373-8913: LINES GP-GREASE
373-8913 LINES GP-GREASE
S/N AMA1-560
SINGLE SHANK RIPPER
Type 1
CANNOT BE USED WITH @@@@@345-1953@@@@@, @@@@@345-1955@@@@@, @@@@@356-5228@@@@@, @@@@@373-6043@@@@@, @@@@@373-8916@@@@@, @@@@@374-6986@@@@@, @@@@@374-9567@@@@@
AN ATTACHMENT
S/N AMA1-560
SINGLE SHANK RIPPER
Type 1
CANNOT BE USED WITH @@@@@345-1953@@@@@, @@@@@345-1955@@@@@, @@@@@356-5228@@@@@, @@@@@373-6043@@@@@, @@@@@373-8916@@@@@, @@@@@374-6986@@@@@, @@@@@374-9567@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D11T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 101-8745 I | [1] | HOSE AS | |
| 3. | 144-0337 I | [1] | HOSE AS | |
| 4. | 145-8299 I | [1] | HOSE AS | |
| 5. | 170-4760 | [2] | PLATE | |
| 6. | 217-6892 I | [1] | HOSE AS | |
| 7. | 222-4395 I | [1] | HOSE AS | |
| 8. | 313-4124 | [2] | PIN AS | |
| (EACH INCLUDES) | ||||
| 9J-2290 | [1] | PIN AS | ||
| 9. | 313-9243 I | [1] | HOSE AS | |
| 10. | 340-2729 | [2] | MANIFOLD | |
| 11. | 341-1970 I | [1] | HOSE AS | |
| 12. | 362-2946 I | [1] | HOSE AS | |
| 13. | 373-6043 Y | [1] | PLATE GP-MOUNTING | |
| 14. | 373-8914 I | [1] | HOSE AS | |
| 15. | 373-8915 I | [1] | HOSE AS | |
| 16. | 373-8918 | [1] | BRACKET AS | |
| 17. | 382-3862 | [4] | CLAMP AS | |
| 18. | 129-3180 M | [8] | LOCKNUT (M12X1.75-THD) | |
| 19. | 148-8316 | [3] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8647 | [1] | CONNECTOR | ||
| 20. | 148-8320 | [10] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 8C-6865 | [1] | CONNECTOR | ||
| 21. | 148-8385 | [3] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-9000 | [1] | ELBOW | ||
| 22. | 3B-8489 | [8] | FITTING-GREASE (1/8-27 PTF) | |
| 23. | 3J-7354 | [2] | SEAL-O-RING | |
| 24. | 4D-9517 | [5] | CLIP (SLOT) | |
| 25. | 4J-5477 | [4] | SEAL-O-RING | |
| 26. | 4K-0684 | [1] | WASHER-HARD (34X55X6-MM THK) | |
| 27. | 4K-6177 | [3] | CLIP | |
| 28. | 4M-8973 | [3] | ELBOW | |
| 29. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 30. | 6K-6967 | [7] | ADAPTER-PIPE | |
| 31. | 6V-0826 | [12] | GROMMET | |
| 32. | 6V-8628 | [1] | ELBOW | |
| 33. | 6V-9000 | [1] | ELBOW | |
| 34. | 7C-8246 | [1] | SPACER (10.5X20X24-MM THK) | |
| 35. | 7X-0408 | [4] | BOLT (1-8X3.5-IN) | |
| 36. | 7X-0445 | [1] | BOLT (1-1/4-7X5-IN) | |
| 37. | 8C-6865 | [2] | CONNECTOR | |
| 38. | 8T-1889 | [12] | CLIP (SLOT) | |
| 39. | 8T-1890 | [12] | CLIP (TAB) | |
| 40. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| 42. | 8T-4139 M | [16] | BOLT (M12X1.75X30-MM) | |
| 43. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 44. | 8T-4223 | [30] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 45. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 46. | 8T-4648 M | [2] | BOLT (M12X1.75X70-MM) | |
| 47. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 48. | 8T-6868 M | [2] | BOLT (M12X1.75X80-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58031158
373-8913: LINES GP-GREASE
373-8913 LINES GP-GREASE
S/N AMA1-560
SINGLE SHANK RIPPER
Type 2
CANNOT BE USED WITH @@@@@345-1953@@@@@, @@@@@345-1955@@@@@, @@@@@356-5228@@@@@, @@@@@373-6043@@@@@, @@@@@373-8916@@@@@, @@@@@374-6986@@@@@, @@@@@374-9567@@@@@
AN ATTACHMENT
S/N AMA1-560
SINGLE SHANK RIPPER
Type 2
CANNOT BE USED WITH @@@@@345-1953@@@@@, @@@@@345-1955@@@@@, @@@@@356-5228@@@@@, @@@@@373-6043@@@@@, @@@@@373-8916@@@@@, @@@@@374-6986@@@@@, @@@@@374-9567@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D11T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 144-0337 I | [1] | HOSE AS | |
| 3. | 145-5630 CI | [1] | HOSE AS | |
| 4. | 170-4760 | [2] | PLATE | |
| 5. | 189-7667 CI | [1] | HOSE AS | |
| 6. | 217-6892 I | [1] | HOSE AS | |
| 7. | 313-4124 | [2] | PIN AS | |
| 8. | 313-9243 I | [1] | HOSE AS | |
| 9. | 340-2729 | [2] | MANIFOLD | |
| 10. | 345-0304 CI | [1] | HOSE AS | |
| 11. | 352-6494 C | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 8C-6865 | [1] | CONNECTOR | ||
| 228-7088 | [1] | SEAL-O-RING | ||
| 12. | 362-2946 I | [1] | HOSE AS | |
| 13. | 362-4915 CI | [1] | HOSE AS | |
| 14. | 373-6043 Y | [1] | PLATE GP-MOUNTING | |
| 15. | 373-8914 I | [1] | HOSE AS | |
| 16. | 373-8915 I | [1] | HOSE AS | |
| 17. | 373-8918 | [1] | BRACKET AS | |
| 18. | 148-8316 | [3] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8647 | [1] | CONNECTOR | ||
| 19. | 148-8320 | [10] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 8C-6865 | [1] | CONNECTOR | ||
| 20. | 148-8369 C | [1] | ELBOW AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8628 | [1] | ELBOW | ||
| 21. | 148-8385 C | [4] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-9000 | [1] | ELBOW | ||
| 22. | 198-4777 C | [1] | WASHER-HARD (11X25X10-MM THK) | |
| 23. | 2R-1939 C | [4] | CLIP | |
| 24. | 3B-8489 | [8] | FITTING-GREASE (1/8-27 PTF) | |
| 25. | 4D-9517 | [5] | CLIP (SLOT) | |
| 26. | 4K-0684 | [1] | WASHER-HARD (34X55X6-MM THK) | |
| 27. | 4K-6177 | [3] | CLIP | |
| 28. | 4M-8973 | [3] | ELBOW | |
| 29. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 30. | 6K-6967 | [7] | ADAPTER-PIPE | |
| 31. | 7C-8246 | [1] | SPACER (10.5X20X24-MM THK) | |
| 32. | 7X-0408 | [4] | BOLT (1-8X3.5-IN) | |
| 33. | 7X-0445 | [1] | BOLT (1-1/4-7X5-IN) | |
| 34. | 8T-4121 C | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 35. | 8T-4136 CM | [6] | BOLT (M10X1.5X25-MM) | |
| 36. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 37. | 8T-4191 CM | [3] | BOLT (M10X1.5X16-MM) | |
| 38. | 8T-4223 C | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 39. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 40. | 8T-4648 M | [2] | BOLT (M12X1.75X70-MM) | |
| 41. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 42. | 8T-6868 M | [2] | BOLT (M12X1.75X80-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58031159
373-8913: LINES GP-GREASE
373-8913 LINES GP-GREASE
S/N AMA561-582
SINGLE SHANK RIPPER
CANNOT BE USED WITH @@@@@345-1953@@@@@, @@@@@345-1955@@@@@, @@@@@356-5228@@@@@, @@@@@373-6043@@@@@, @@@@@373-8916@@@@@, @@@@@374-6986@@@@@, @@@@@374-9567@@@@@
AN ATTACHMENT
S/N AMA561-582
SINGLE SHANK RIPPER
CANNOT BE USED WITH @@@@@345-1953@@@@@, @@@@@345-1955@@@@@, @@@@@356-5228@@@@@, @@@@@373-6043@@@@@, @@@@@373-8916@@@@@, @@@@@374-6986@@@@@, @@@@@374-9567@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D11T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 144-0337 I | [1] | HOSE AS | |
| 3. | 145-5630 I | [1] | HOSE AS | |
| 4. | 170-4760 | [2] | PLATE | |
| 5. | 189-7667 I | [1] | HOSE AS | |
| 6. | 217-6892 I | [1] | HOSE AS | |
| 7. | 313-4124 | [2] | PIN AS | |
| 8. | 313-9243 I | [1] | HOSE AS | |
| 9. | 340-2729 | [2] | MANIFOLD | |
| 10. | 345-0304 I | [1] | HOSE AS | |
| 11. | 352-6494 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 8C-6865 | [1] | CONNECTOR | ||
| 228-7088 | [1] | SEAL-O-RING | ||
| 12. | 362-2946 I | [1] | HOSE AS | |
| 13. | 362-4915 I | [1] | HOSE AS | |
| 14. | 373-6043 Y | [1] | PLATE GP-MOUNTING | |
| 15. | 461-5231 CI | [1] | HOSE AS | |
| 16. | 461-5230 CI | [1] | HOSE AS | |
| 17. | 373-8918 | [1] | BRACKET AS | |
| 18. | 148-8316 C | [5] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8647 | [1] | CONNECTOR | ||
| 19. | 148-8320 C | [8] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 8C-6865 | [1] | CONNECTOR | ||
| 20. | 148-8369 | [1] | ELBOW AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8628 | [1] | ELBOW | ||
| 21. | 148-8385 | [4] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-9000 | [1] | ELBOW | ||
| 22. | 198-4777 | [1] | WASHER-HARD (11X25X10-MM THK) | |
| 23. | 2R-1939 | [4] | CLIP | |
| 24. | 3B-8489 | [8] | FITTING-GREASE (1/8-27 PTF) | |
| 25. | 4D-9517 | [5] | CLIP (SLOT) | |
| 26. | 4K-0684 | [1] | WASHER-HARD (34X55X6-MM THK) | |
| 27. | 4K-6177 C | [2] | CLIP | |
| 28. | 4M-8973 | [3] | ELBOW | |
| 29. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 30. | 6K-6967 C | [6] | ADAPTER-PIPE | |
| 31. | 7C-8246 | [1] | SPACER (10.5X20X24-MM THK) | |
| 32. | 7X-0408 | [4] | BOLT (1-8X3.5-IN) | |
| 33. | 7X-0445 | [1] | BOLT (1-1/4-7X5-IN) | |
| 34. | 8T-4121 C | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 35. | 8T-4136 CM | [5] | BOLT (M10X1.5X25-MM) | |
| 36. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 37. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 38. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 39. | 329-3356 CM | [2] | NUT (M12X1.75-THD) | |
| 40. | 8T-4648 M | [2] | BOLT (M12X1.75X70-MM) | |
| 41. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 42. | 8T-6868 M | [2] | BOLT (M12X1.75X80-MM) | |
| 43. | 380-0937 C | [1] | MANIFOLD | |
| 44. | 8T-6466 CM | [2] | BOLT (M10X1.5X60-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog D11T :
Truck sale:
1,473,963
