AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

359-0269 INSTALLATION AR-BULLDOZER -AUTO CARRY S/N MDG1-178 AN ATTACHMENT D11T TRACK-TYPE TRACTOR


IMPLEMENTS
BULLDOZER GP
LINES GP-OIL
LINES GP-GREASE

TRACK-TYPE TRACTOR D11T TRACK-TYPE TRACTOR MDG
 D11T CARRYDOZER TRACK-TYPE TRACTOR MDG00001-UP (MACHINE) POWERED BY C32 Engine SEBP5804 D11T MDG   (2011)

IMPLEMENTS

BULLDOZER GP
INSTALLATION AR-BULLDOZER
359-0269 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
359-0269 INSTALLATION AR-BULLDOZER
LINK GP-STABILIZER
204-5660 LINK GP-STABILIZER
PUSH ARM GP
359-0272 PUSH ARM GP
 

#SEBP58041100
 

359-0269: INSTALLATION AR-BULLDOZER

359-0269 INSTALLATION AR-BULLDOZER -AUTO CARRY
S/N MDG1-178
AN ATTACHMENT
i04443073 SEBP5804
3590269 INSTALLATION AR-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-3797 [2] CONNECTOR  
2. 6J-5985 [2] PIN  
3. 6J-5986 [4] RETAINER  
4. 9J-2365 [2] RETAINER  
5. 9W-2939 [2] PIN  
6. 119-4297 Y [1] TRUNNION GP-BULLDOZER  
7. 130-3434 [2] PIN  
8. 142-0300 [2] PIN  
9. 147-5968 [2] RETAINER  
10. 150-4502 [2] CONNECTOR AS  
    (EACH INCLUDES)
10A. 149-7576 [4] BEARING  
  3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
  3E-6758 [4] SEAL-LIP TYPE  
11. 196-3504 Y [1] LINES GP-DUMP CYLINDER  
12. 248-2227 Y [1] LINES GP-LIFT CYLINDER  
13. 250-6732 Y [2] CYLINDER & VALVE GP-LIFT  
14. 359-0272 Y [1] PUSH ARM GP (DUAL TILT)  
15. 7X-0381 [10] BOLT (7/8-9X2-IN)  
16. 8T-8917 [8] BOLT (1/2-13X1.25-IN)  
17. 142-2075 [6] SPACER (105.1X215.9X3-MM THK)  
18. 158-2836 [4] SPACER  
19. 155-5156 B [12] SHIM (0.5-MM THK)  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BLADE)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP58041101
 

359-0269: INSTALLATION AR-BULLDOZER

359-0269 INSTALLATION AR-BULLDOZER -AUTO CARRY
S/N MDG179-UP
AN ATTACHMENT
i06274128 SEBP5804
3590269 INSTALLATION AR-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-3797 [2] CONNECTOR  
2. 6J-5985 [2] PIN  
3. 6J-5986 [4] RETAINER  
4. 9J-2365 [2] RETAINER  
5. 9W-2939 [2] PIN  
6. 119-4297 Y [1] TRUNNION GP-BULLDOZER  
7. 130-3434 [2] PIN  
8. 142-0300 [2] PIN  
9. 147-5968 [2] RETAINER  
10. 150-4502 [2] CONNECTOR AS  
    (EACH INCLUDES)
10A. 149-7576 [4] BEARING  
  3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
  3E-6758 [4] SEAL-LIP TYPE  
11. 196-3504 Y [1] LINES GP-DUMP CYLINDER  
12. 248-2227 Y [1] LINES GP-LIFT CYLINDER  
13. 477-9336 CY [2] CYLINDER & VALVE GP-LIFT (BLADE LIFT)  
14. 359-0272 Y [1] PUSH ARM GP (DUAL TILT)  
15. 7X-0381 [10] BOLT (7/8-9X2-IN)  
16. 8T-8917 [8] BOLT (1/2-13X1.25-IN)  
17. 142-2075 B [6] SPACER (105.1X215.9X3-MM THK)  
18. 158-2836 [4] SPACER  
19. 155-5156 B [12] SHIM (0.5-MM THK)  
20. 431-1414 C [2] CABLE AS (POSITION SENSING)  
    (EACH INCLUDES)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  281-3121 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP58041102
 

196-3504: LINES GP-DUMP CYLINDER

196-3504 LINES GP-DUMP CYLINDER
S/N MDG1-UP
PART OF 359-0269 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i01444073 SEBP5804
1963504 LINES GP-DUMP CYLINDER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-6531 [1] TUBE AS (RH)  
2. 1P-3704 [12] SEAL-RECTANGULAR  
3. 8T-4223 [40] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 6V-4432 [8] BOLT (1/2-13X4-IN)  
5. 1P-5767 [12] FLANGE-HALF  
6. 8T-4835 [24] BOLT (1/2-13X2-IN)  
7. 5R-9662 [2] CLAMP  
8. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
10. 149-7521 [2] MANIFOLD  
11. 7X-0326 [4] BOLT (1/2-13X3-IN)  
12. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
13. 5P-0048 [2] COVER  
14. 137-6538 [1] GUARD AS  
  1U-3658 [1] HANDLE  
  7D-2392 [1] BOSS  
15. 7X-0572 [12] WASHER-HARD (24X44.5X6-MM THK)  
16. 7X-0381 [12] BOLT (7/8-9X2-IN)  
17. 149-7760 [1] TUBE AS (LH)  
18. 149-7759 [1] GUARD AS  
  1U-3658 [1] HANDLE  
  7D-2392 [1] BOSS  
19. 133-8356 I [2] HOSE AS  
20. 1P-3703 [2] SEAL-RECTANGULAR  
21. 6V-1575 [1] CLIP (SLOT)  
22. 6V-1877 [1] GROMMET  
23. 6V-1576 [1] CLIP (TAB)  
24. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
25. 4L-6454 [4] BOLT (3/8-16X1-IN)  
26. 6V-8801 [4] NUT (3/8-16-THD)  
27. 7K-1181 [8] STRAP-CABLE  
28. 196-3505 I [2] HOSE AS  
30. 7G-5986 [1] GROMMET  
31. 7G-5984 [1] CLIP (TAB)  
32. 7G-5985 [1] CLIP (SLOT)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP58041103
 

373-8913: LINES GP-GREASE

373-8913 LINES GP-GREASE
S/N MDG1-UP
SINGLE SHANK RIPPER
Type 1
CANNOT BE USED WITH @@@@@345-1955@@@@@, @@@@@356-5228@@@@@, @@@@@373-6043@@@@@, @@@@@373-8916@@@@@, @@@@@374-6987@@@@@, @@@@@374-9567@@@@@
AN ATTACHMENT
i04440231 SEBP5804
3738913 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 101-8745 I [1] HOSE AS  
3. 144-0337 I [1] HOSE AS  
4. 145-8299 I [1] HOSE AS  
5. 170-4760 [2] PLATE  
6. 217-6892 I [1] HOSE AS  
7. 222-4395 I [1] HOSE AS  
8. 313-4124 [2] PIN AS  
    (EACH INCLUDES)
  9J-2290 [1] PIN AS  
9. 313-9243 I [1] HOSE AS  
10. 340-2729 [2] MANIFOLD  
11. 341-1970 I [1] HOSE AS  
12. 362-2946 I [1] HOSE AS  
13. 373-6043 Y [1] PLATE GP-MOUNTING  
14. 373-8914 I [1] HOSE AS  
15. 373-8915 I [1] HOSE AS  
16. 373-8918 [1] BRACKET AS  
17. 382-3862 [4] CLAMP AS  
18. 129-3180 M [8] LOCKNUT (M12X1.75-THD)  
19. 148-8316 [3] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
20. 148-8320 [10] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
21. 148-8385 [3] ELBOW AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-9000 [1] ELBOW  
22. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
23. 3J-7354 [2] SEAL-O-RING  
24. 4D-9517 [5] CLIP (SLOT)  
25. 4J-5477 [4] SEAL-O-RING  
26. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
27. 4K-6177 [3] CLIP  
28. 4M-8973 [3] ELBOW  
29. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
30. 6K-6967 [7] ADAPTER-PIPE  
31. 6V-0826 [12] GROMMET  
32. 6V-8628 [1] ELBOW  
33. 6V-9000 [1] ELBOW  
34. 7C-8246 [1] SPACER (10.5X20X24-MM THK)  
35. 7X-0408 [4] BOLT (1-8X3.5-IN)  
36. 7X-0445 [1] BOLT (1-1/4-7X5-IN)  
37. 8C-6865 [2] CONNECTOR  
38. 8T-1889 [12] CLIP (SLOT)  
39. 8T-1890 [12] CLIP (TAB)  
40. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
42. 8T-4139 M [16] BOLT (M12X1.75X30-MM)  
43. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
44. 8T-4223 [30] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4244 M [2] NUT (M12X1.75-THD)  
46. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
47. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
48. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP58041104
 

373-8913: LINES GP-GREASE

373-8913 LINES GP-GREASE
S/N MDG1-UP
SINGLE SHANK RIPPER
Type 2
CANNOT BE USED WITH @@@@@345-1955@@@@@, @@@@@356-5228@@@@@, @@@@@373-6043@@@@@, @@@@@373-8916@@@@@, @@@@@374-6987@@@@@, @@@@@374-9567@@@@@
AN ATTACHMENT
i05277870 SEBP5804
3738913 LINES GP-GREASE Parts scheme 3738913 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 144-0337 I [1] HOSE AS  
3. 145-5630 CI [1] HOSE AS  
4. 170-4760 [2] PLATE  
5. 189-7667 CI [1] HOSE AS  
6. 217-6892 I [1] HOSE AS  
7. 313-4124 [2] PIN AS  
8. 313-9243 I [1] HOSE AS  
9. 340-2729 [2] MANIFOLD  
10. 345-0304 CI [1] HOSE AS  
11. 352-6494 C [2] ADAPTER AS  
    (EACH INCLUDES)
  8C-6865 [1] CONNECTOR  
  228-7088 [1] SEAL-O-RING  
12. 362-2946 I [1] HOSE AS  
13. 362-4915 CI [1] HOSE AS  
14. 373-6043 Y [1] PLATE GP-MOUNTING  
15. 373-8914 I [1] HOSE AS  
16. 373-8915 I [1] HOSE AS  
17. 373-8918 [1] BRACKET AS  
18. 148-8316 [3] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
19. 148-8320 [10] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
20. 148-8369 C [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
21. 148-8385 C [4] ELBOW AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-9000 [1] ELBOW  
22. 198-4777 C [1] WASHER-HARD (11X25X10-MM THK)  
23. 2R-1939 C [4] CLIP  
24. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
25. 4D-9517 [5] CLIP (SLOT)  
26. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
27. 4K-6177 [3] CLIP  
28. 4M-8973 [3] ELBOW  
29. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
30. 6K-6967 [7] ADAPTER-PIPE  
31. 7C-8246 [1] SPACER (10.5X20X24-MM THK)  
32. 7X-0408 [4] BOLT (1-8X3.5-IN)  
33. 7X-0445 [1] BOLT (1-1/4-7X5-IN)  
34. 8T-4121 C [10] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4136 CM [6] BOLT (M10X1.5X25-MM)  
36. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
37. 8T-4191 CM [3] BOLT (M10X1.5X16-MM)  
38. 8T-4223 C [6] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 8T-4244 M [2] NUT (M12X1.75-THD)  
40. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
41. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
42. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP58041105
 

373-8913: LINES GP-GREASE

373-8913 LINES GP-GREASE
S/N MDG1-176
SINGLE SHANK RIPPER
CANNOT BE USED WITH @@@@@345-1955@@@@@, @@@@@356-5228@@@@@, @@@@@373-6043@@@@@, @@@@@373-8916@@@@@, @@@@@374-6987@@@@@, @@@@@374-9567@@@@@
AN ATTACHMENT
i05957711 SEBP5804
3738913 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 144-0337 I [1] HOSE AS  
3. 145-5630 I [1] HOSE AS  
4. 170-4760 [2] PLATE  
5. 189-7667 I [1] HOSE AS  
6. 217-6892 I [1] HOSE AS  
7. 313-4124 [2] PIN AS  
8. 313-9243 I [1] HOSE AS  
9. 340-2729 [2] MANIFOLD  
10. 345-0304 I [1] HOSE AS  
11. 352-6494 [2] ADAPTER AS  
    (EACH INCLUDES)
  8C-6865 [1] CONNECTOR  
  228-7088 [1] SEAL-O-RING  
12. 362-2946 I [1] HOSE AS  
13. 362-4915 I [1] HOSE AS  
14. 373-6043 Y [1] PLATE GP-MOUNTING  
15. 461-5231 CI [1] HOSE AS  
16. 461-5230 CI [1] HOSE AS  
17. 373-8918 [1] BRACKET AS  
18. 148-8316 C [5] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
19. 148-8320 C [8] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
20. 148-8369 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
21. 148-8385 [4] ELBOW AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-9000 [1] ELBOW  
22. 198-4777 [1] WASHER-HARD (11X25X10-MM THK)  
23. 2R-1939 [4] CLIP  
24. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
25. 4D-9517 [5] CLIP (SLOT)  
26. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
27. 4K-6177 C [2] CLIP  
28. 4M-8973 [3] ELBOW  
29. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
30. 6K-6967 C [6] ADAPTER-PIPE  
31. 7C-8246 [1] SPACER (10.5X20X24-MM THK)  
32. 7X-0408 [4] BOLT (1-8X3.5-IN)  
33. 7X-0445 [1] BOLT (1-1/4-7X5-IN)  
34. 8T-4121 C [11] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4136 CM [5] BOLT (M10X1.5X25-MM)  
36. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
37. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
38. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 329-3356 CM [2] NUT (M12X1.75-THD)  
40. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
41. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
42. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
43. 380-0937 C [1] MANIFOLD  
44. 8T-6466 CM [2] BOLT (M10X1.5X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP58041106
 

373-8913: LINES GP-GREASE

373-8913 LINES GP-GREASE
S/N MDG177-UP
SINGLE SHANK RIPPER
CANNOT BE USED WITH @@@@@345-1955@@@@@, @@@@@356-5228@@@@@, @@@@@373-6043@@@@@, @@@@@373-8916@@@@@, @@@@@374-6987@@@@@, @@@@@374-9567@@@@@
AN ATTACHMENT
i06256536 SEBP5804
3738913 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 144-0337 I [1] HOSE AS  
3. 145-5630 I [1] HOSE AS  
4. 170-4760 [2] PLATE  
5. 504-5734 I [1] HOSE AS  
6. 217-6892 I [1] HOSE AS  
7. 313-4124 [2] PIN AS  
8. 313-9243 I [1] HOSE AS  
9. 340-2729 [2] MANIFOLD  
10. 345-0304 I [1] HOSE AS  
11. 352-6494 [2] ADAPTER AS  
    (EACH INCLUDES)
  8C-6865 [1] CONNECTOR  
  228-7088 [1] SEAL-O-RING  
12. 362-2946 I [1] HOSE AS  
13. 362-4915 I [1] HOSE AS  
15. 461-5231 I [1] HOSE AS  
16. 461-5230 I [1] HOSE AS  
17. 381-2294 [1] BRACKET AS  
18. 148-8316 [5] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
19. 148-8320 [8] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
20. 148-8369 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
21. 148-8385 [4] ELBOW AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-9000 [1] ELBOW  
22. 198-4777 [1] WASHER-HARD (11X25X10-MM THK)  
23. 2R-1939 [4] CLIP  
24. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
25. 4D-9517 [5] CLIP (SLOT)  
26. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
27. 4K-6177 [2] CLIP  
28. 4M-8973 [3] ELBOW  
29. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
30. 6K-6967 [6] ADAPTER-PIPE  
31. 133-6934 [1] SPACER (11X20X25-MM THK)  
32. 7X-0408 [4] BOLT (1-8X3.5-IN)  
33. 7X-0445 [1] BOLT (1-1/4-7X5-IN)  
34. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
36. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
37. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
38. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 329-3356 M [2] NUT (M12X1.75-THD)  
40. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
42. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
43. 380-0937 [1] MANIFOLD  
44. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP58041107
 

373-8916: LINES GP-GREASE

373-8916 LINES GP-GREASE
S/N MDG1-UP
MULTISHANK RIPPER
CANNOT BE USED WITH @@@@@345-1954@@@@@, @@@@@356-5228@@@@@, @@@@@373-8913@@@@@, @@@@@373-6043@@@@@, @@@@@374-9567@@@@@, @@@@@374-6987@@@@@
AN ATTACHMENT
i04440249 SEBP5804
3738916 LINES GP-GREASE Parts scheme 3738916 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 101-8745 I [1] HOSE AS  
3. 144-0337 I [1] HOSE AS  
4. 145-8299 I [1] HOSE AS  
5. 170-4760 [2] PLATE  
6. 217-6892 I [1] HOSE AS  
7. 222-4395 I [1] HOSE AS  
8. 313-4124 [2] PIN AS  
9. 313-9243 I [1] HOSE AS  
10. 340-2729 [2] MANIFOLD  
11. 341-1970 I [1] HOSE AS  
12. 362-2946 I [1] HOSE AS  
13. 373-6043 Y [1] PLATE GP-MOUNTING  
14. 373-8918 [1] BRACKET AS  
15. 374-0780 I [2] HOSE AS  
16. 382-3862 [8] CLAMP AS  
17. 129-3180 M [8] LOCKNUT (M12X1.75-THD)  
18. 148-8316 [5] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
19. 148-8320 [8] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
20. 148-8385 [3] ELBOW AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-9000 [1] ELBOW  
21. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
22. 3J-7354 [2] SEAL-O-RING  
23. 4D-9517 [6] CLIP (SLOT)  
24. 4J-5477 [4] SEAL-O-RING  
25. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
26. 4M-8973 [3] ELBOW  
27. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
28. 6K-6967 [6] ADAPTER-PIPE  
29. 6V-0826 [12] GROMMET  
30. 6V-8628 [1] ELBOW  
31. 6V-9000 [1] ELBOW  
32. 7X-0408 [4] BOLT (1-8X3.5-IN)  
33. 7X-0445 [1] BOLT (1-1/4-7X5-IN)  
34. 8C-6865 [2] CONNECTOR  
35. 8T-1889 [12] CLIP (SLOT)  
36. 8T-1890 [12] CLIP (TAB)  
37. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
39. 8T-4139 M [16] BOLT (M12X1.75X30-MM)  
40. 8T-4223 [30] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [2] NUT (M12X1.75-THD)  
42. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP58041108
 

373-8916: LINES GP-GREASE

373-8916 LINES GP-GREASE
S/N MDG1-176
MULTISHANK RIPPER
CANNOT BE USED WITH @@@@@345-1954@@@@@, @@@@@356-5228@@@@@, @@@@@373-8913@@@@@, @@@@@373-6043@@@@@, @@@@@374-9567@@@@@, @@@@@374-6987@@@@@
AN ATTACHMENT
i05277871 SEBP5804
3738916 LINES GP-GREASE Parts scheme 3738916 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 144-0337 I [1] HOSE AS  
3. 145-5630 CI [1] HOSE AS  
4. 170-4760 [2] PLATE  
5. 189-7667 CI [1] HOSE AS  
6. 217-6892 I [1] HOSE AS  
7. 313-4124 [2] PIN AS  
8. 313-9243 I [1] HOSE AS  
9. 340-2729 [2] MANIFOLD  
10. 345-0304 CI [1] HOSE AS  
11. 352-6494 C [2] ADAPTER AS  
    (EACH INCLUDES)
  8C-6865 [1] CONNECTOR  
  228-7088 [1] SEAL-O-RING  
12. 362-2946 CI [1] HOSE AS  
13. 362-4915 CI [1] HOSE AS  
14. 373-6043 Y [1] PLATE GP-MOUNTING  
15. 373-8918 [1] BRACKET AS  
16. 374-0780 I [2] HOSE AS  
17. 148-8316 [5] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
18. 148-8320 [8] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
19. 148-8369 C [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
20. 148-8385 C [4] ELBOW AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-9000 [1] ELBOW  
21. 198-4777 C [1] WASHER-HARD (11X25X10-MM THK)  
22. 2R-1939 C [4] CLIP  
23. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
24. 4D-9517 [6] CLIP (SLOT)  
25. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
26. 4M-8973 [3] ELBOW  
27. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
28. 6K-6967 [6] ADAPTER-PIPE  
29. 7X-0408 [4] BOLT (1-8X3.5-IN)  
30. 7X-0445 [1] BOLT (1-1/4-7X5-IN)  
31. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4136 CM [5] BOLT (M10X1.5X25-MM)  
33. 8T-4191 CM [3] BOLT (M10X1.5X16-MM)  
34. 8T-4223 C [6] WASHER-HARD (13.5X25.5X3-MM THK)  
35. 8T-4244 M [2] NUT (M12X1.75-THD)  
36. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
37. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
38. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP58041109
 

373-8916: LINES GP-GREASE

373-8916 LINES GP-GREASE
S/N MDG177-UP
MULTISHANK RIPPER
CANNOT BE USED WITH @@@@@345-1954@@@@@, @@@@@356-5228@@@@@, @@@@@373-8913@@@@@, @@@@@373-6043@@@@@, @@@@@374-9567@@@@@, @@@@@374-6987@@@@@
AN ATTACHMENT
i06256562 SEBP5804
3738916 LINES GP-GREASE Parts scheme 3738916 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 144-0337 I [1] HOSE AS  
3. 145-5630 I [1] HOSE AS  
4. 170-4760 [2] PLATE  
5. 504-5734 I [1] HOSE AS  
6. 217-6892 I [1] HOSE AS  
7. 313-4124 [2] PIN AS  
8. 313-9243 I [1] HOSE AS  
9. 340-2729 [2] MANIFOLD  
10. 345-0304 I [1] HOSE AS  
11. 352-6494 [2] ADAPTER AS  
    (EACH INCLUDES)
  8C-6865 [1] CONNECTOR  
  228-7088 [1] SEAL-O-RING  
12. 362-2946 I [1] HOSE AS  
13. 362-4915 I [1] HOSE AS  
15. 381-2294 [1] BRACKET AS  
16. 374-0780 I [2] HOSE AS  
17. 148-8316 [5] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
18. 148-8320 [8] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
19. 148-8369 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
20. 148-8385 [4] ELBOW AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-9000 [1] ELBOW  
21. 198-4777 [1] WASHER-HARD (11X25X10-MM THK)  
22. 2R-1939 [4] CLIP  
23. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
24. 4D-9517 [6] CLIP (SLOT)  
25. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
26. 4M-8973 [3] ELBOW  
27. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
28. 6K-6967 [6] ADAPTER-PIPE  
29. 7X-0408 [4] BOLT (1-8X3.5-IN)  
30. 7X-0445 [1] BOLT (1-1/4-7X5-IN)  
31. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
33. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
34. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
35. 329-3356 CM [2] NUT (M12X1.75-THD)  
36. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
37. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D11T :

VALVE GP-TILT CONTROL
225-2321 VALVE GP-TILT CONTROL
VALVE GP-SOLENOID
3E-9205 VALVE GP-SOLENOID
VALVE GP-SOLENOID
3E-8575 VALVE GP-SOLENOID
VALVE GP-SOLENOID
279-6528 VALVE GP-SOLENOID
VALVE GP-SOLENOID
222-3137 VALVE GP-SOLENOID
VALVE GP-SOLENOID
201-0950 VALVE GP-SOLENOID
VALVE GP-SOLENOID
174-4916 VALVE GP-SOLENOID
VALVE GP-SOLENOID
152-8346 VALVE GP-SOLENOID
INSTALLATION AR-BULLDOZER
359-0269 INSTALLATION AR-BULLDOZER
LINES GP-DUMP CYLINDER
196-3504 LINES GP-DUMP CYLINDER
LINES GP-GREASE
373-8913 LINES GP-GREASE
LINES GP-GREASE
373-8913 LINES GP-GREASE
LINES GP-GREASE
373-8913 LINES GP-GREASE
LINES GP-GREASE
373-8913 LINES GP-GREASE
LINES GP-GREASE
373-8916 LINES GP-GREASE
LINES GP-GREASE
373-8916 LINES GP-GREASE

Truck sale:

Caterpillar D11T
 
Caterpillar D11T
- Crawler dozers
HASTINGS DEERING (AUSTRALIA)
Caterpillar D11TQ, Crawler dozers, Construction
700,000 
Caterpillar D11TQ, Crawler dozers, Construction
- Crawler dozers
FINNING CHILE S.A.
Caterpillar D11T, Crawler dozers, Construction
1,500,000 
Caterpillar D11T, Crawler dozers, Construction
- Crawler dozers
HOLT CAT
Caterpillar D11T, Crawler dozers, Construction
1,473,963 
Caterpillar D11T, Crawler dozers, Construction
- Crawler dozers
HASTINGS DEERING (AUSTRALIA)
Caterpillar D11T, Rupsdozers, Bouw
535.000 
Caterpillar D11T, Rupsdozers, Bouw

WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.