OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
COOLER GPCOVER GP
CYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP58050930
325-4809: CONTROL AR-HYDRAULIC
325-4809 CONTROL AR-HYDRAULIC -BULLDOZER, WINCH
S/N FCT1-1012
CANNOT BE USED WITH RIPPER AR-MULTISHANK, RIPPER AR-SINGLE SHANK
AN ATTACHMENT
S/N FCT1-1012
CANNOT BE USED WITH RIPPER AR-MULTISHANK, RIPPER AR-SINGLE SHANK
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58050931
325-4813: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58050932
325-4819: CONTROL AR-HYDRAULIC
325-4819 CONTROL AR-HYDRAULIC -BULLDOZER, DUAL TILT
S/N FCT1-1012
AN ATTACHMENT
S/N FCT1-1012
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 342-8944 Y | [1] | CONTROL GP-JOYSTICK (BULLDOZER) | ||
| 339-6171 Y | [1] | LINES GP-TILT CYLINDER (DUAL) | ||
| 340-6285 Y | [1] | MODULE GP-MONITOR KEYPAD | ||
| 217-4326 Y | [1] | VALVE GP-CONTROL (BULLDOZER, DUAL TILT) | ||
| 364-3719 | [1] | FILM-IDENTIFICATION (JOYSTICK)(AUTOMATIC BLADE) | ||
| 372-5885 | [1] | FILM-IDENTIFICATION (JOYSTICK)(DUAL TILT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58050933
379-0268: CONTROL AR-HYDRAULIC
379-0268 CONTROL AR-HYDRAULIC -BULLDOZER, SINGLE TILT
S/N FCT1013-UP
PART OF 442-1035 DISTRIBUTION AR
AN ATTACHMENT
S/N FCT1013-UP
PART OF 442-1035 DISTRIBUTION AR
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5G-9973 | [2] | COVER | |
| 2. | 5G-9974 | [2] | GASKET | |
| 3. | 193-9055 M | [2] | SCREW-HEX FLANGE (M4X1.79X17-MM) | |
| 4. | 304-4030 Y | [1] | BOX GP-STORAGE | |
| 5. | 328-0731 | [1] | HANDHOLD GP (CAB ACCESS) | |
| 9W-5343 | [1] | HANDHOLD | ||
| 6. | 339-0509 Y | [1] | CONTROL & MTG GP-JOYSTICK (RH)(BULLDOZER) | |
| 7. | 351-9845 | [1] | COVER | |
| 8. | 372-0438 | [1] | PLATE | |
| 9. | 334-1658 | [1] | SENSOR AS-ANGLE (GRADE CONTROL) | |
| 386-0444 | [1] | HARNESS AS-SENSOR (GRADE CONTROL) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 112-4550 E | SLEEVE (20-CM) | |||
| 10. | 3E-4352 | [4] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 11. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 12. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 9X-2616 M | [4] | SCREW-SOCKET (M8X1.25X16-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58050934
379-0269: CONTROL AR-HYDRAULIC
379-0269 CONTROL AR-HYDRAULIC -BULLDOZER, DUAL TILT
S/N FCT1013-UP
AN ATTACHMENT
S/N FCT1013-UP
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5G-9973 | [2] | COVER | |
| 2. | 5G-9974 | [2] | GASKET | |
| 3. | 304-4030 Y | [1] | BOX GP-STORAGE | |
| 4. | 328-0731 | [1] | HANDHOLD GP (CAB ACCESS) | |
| 9W-5343 | [1] | HANDHOLD | ||
| 5. | 340-6285 Y | [1] | MODULE GP-MONITOR KEYPAD | |
| 6. | 346-0020 Y | [1] | CONTROL & MTG GP-JOYSTICK (DUAL TILT)(DUAL TILT) | |
| 7. | 372-0438 | [1] | PLATE | |
| 8. | 334-1658 | [1] | SENSOR AS-ANGLE (GRADE CONTROL) | |
| 386-0444 | [1] | HARNESS AS-SENSOR (GRADE CONTROL) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 112-4550 E | SLEEVE (20-CM) | |||
| 9. | 3E-4352 | [4] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 10. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 11. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 9X-2616 M | [4] | SCREW-SOCKET (M8X1.25X16-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58050935
327-1022: COOLER GP-HYDRAULIC OIL
327-1022 COOLER GP-HYDRAULIC OIL
S/N FCT1-UP
PART OF 325-4805 INSTALLATION AR, 379-0253 INSTALLATION AR-ENGINE
S/N FCT1-UP
PART OF 325-4805 INSTALLATION AR, 379-0253 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-6984 | [4] | MOUNT-RUBBER | |
| 2. | 334-3321 | [1] | CORE AS-HYDRAULIC OIL COOLER | |
| 360-5604 | [1] | VALVE AS-CONTROL (HYDRAULIC OIL TEMP) | ||
| 238-5085 | [1] | SEAL-O-RING | ||
| 3. | 340-5336 | [1] | BRACKET AS | |
| 4. | 341-1407 | [1] | BRACKET | |
| 5. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 6. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 7. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 8. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
| 9. | 8T-4226 | [8] | WASHER-PLATED (10.5X45X3-MM THK) | |
| M | METRIC PART | |||
#SEBP58050936
231-1466: COVER GP-REAR HYDRAULIC
231-1466 COVER GP-REAR HYDRAULIC
S/N FCT1-UP
PART OF 379-0267 HYDRAULIC AR, 363-5947 HYDRAULIC AR-3 VALVE
AN ATTACHMENT
S/N FCT1-UP
PART OF 379-0267 HYDRAULIC AR, 363-5947 HYDRAULIC AR-3 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5T-1352 | [6] | SPACER (34X55X12-MM THK) | |
| 2. | 215-4196 | [1] | BAR | |
| 3. | 231-1468 | [1] | COVER AS-REAR | |
| 3A. | 1F-0748 | [1] | NUT-WELD (1/2-13-THD) | |
| 3B. | 1K-8850 | [2] | SPRING | |
| 3C. | 4K-8501 | [4] | CLIP | |
| 3D. | 7G-4262 | [1] | HINGE | |
| 3E. | 7K-3673 | [4] | BOSS | |
| 3F. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3G. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 3H. | 9P-9548 | [4] | PIN | |
| 3J. | 9P-9550 | [4] | TUBE | |
| 4. | 243-4320 | [1] | BRACKET AS (RH) | |
| 5. | 243-4324 | [1] | BRACKET AS (LH) | |
| 6. | 271-8569 | [1] | FILM-INSTRUCTION (IMPLEMENT CONNECT, LH) | |
| 7. | 271-8570 | [1] | FILM-INSTRUCTION (IMPLEMENT CONNECT, RH) | |
| 8. | 2K-3219 | [8] | SCREW-DRIVE (NO 6X0.25-IN) | |
| 9. | 5P-1076 | [8] | WASHER-HARD (13.5X30X4-MM THK) | |
| 10. | 7X-2580 M | [6] | BOLT (M30X3.5X90-MM) | |
| 11. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| M | METRIC PART | |||
#SEBP58050937
335-8332: CYLINDER & LINES GP
335-8332 CYLINDER & LINES GP -POSITION SENSING, LH
S/N FCT1-UP
PART OF 386-0491 CYLINDER & LINES GP
FOR USE WITH @@@@@335-8333@@@@@
CANNOT BE USED WITH @@@@@338-8656@@@@@, @@@@@338-8657@@@@@
AN ATTACHMENT
S/N FCT1-UP
PART OF 386-0491 CYLINDER & LINES GP
FOR USE WITH @@@@@335-8333@@@@@
CANNOT BE USED WITH @@@@@338-8656@@@@@, @@@@@338-8657@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-6251 | [1] | CONNECTOR AS | |
| 4K-1388 | [1] | SEAL-O-RING | ||
| 6V-8400 | [1] | SEAL-O-RING | ||
| 9X-8260 | [1] | CONNECTOR | ||
| 2. | 222-1222 Y | [1] | CYLINDER GP-BULLDOZER LIFT | |
| 3. | 238-9612 | [1] | BRACKET AS | |
| 4. | 238-9807 | [1] | TUBE AS | |
| 5. | 336-3574 I | [1] | HOSE AS | |
| 6. | 336-3575 I | [1] | HOSE AS | |
| 7. | 353-5525 | [1] | BRACKET AS | |
| 8. | 148-8323 | [1] | CONNECTOR AS | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-9875 | [1] | CONNECTOR | ||
| 9. | 4J-0520 | [3] | SEAL-O-RING | |
| 10. | 6V-8149 M | [1] | NUT (M12X1.75-THD) | |
| 11. | 7G-5984 | [1] | CLIP (TAB) | |
| 12. | 7G-5985 | [1] | CLIP (SLOT) | |
| 13. | 7G-5986 | [1] | GROMMET | |
| 14. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
| 15. | 8C-3206 | [2] | FLANGE-HALF | |
| 16. | 8E-6303 | [1] | CLIP (TAB) | |
| 17. | 8E-6304 | [1] | CLIP (SLOT) | |
| 18. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 21. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 22. | 8T-4194 M | [1] | BOLT (M12X1.75X50-MM) | |
| 23. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 24. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58050938
335-8332: CYLINDER & LINES GP
335-8332 CYLINDER & LINES GP -POSITION SENSING, LH
S/N FCT1013-UP
PART OF 386-0491 CYLINDER & LINES GP
FOR USE WITH @@@@@335-8333@@@@@
CANNOT BE USED WITH @@@@@338-8656@@@@@, @@@@@338-8657@@@@@
AN ATTACHMENT
S/N FCT1013-UP
PART OF 386-0491 CYLINDER & LINES GP
FOR USE WITH @@@@@335-8333@@@@@
CANNOT BE USED WITH @@@@@338-8656@@@@@, @@@@@338-8657@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-6251 | [1] | CONNECTOR AS | |
| 4K-1388 | [1] | SEAL-O-RING | ||
| 6V-8400 | [1] | SEAL-O-RING | ||
| 9X-8260 | [1] | CONNECTOR | ||
| 2. | 380-5282 CY | [1] | CYLINDER GP-BULLDOZER LIFT | |
| 3. | 238-9612 | [1] | BRACKET AS | |
| 4. | 238-9807 | [1] | TUBE AS | |
| 5. | 336-3574 I | [1] | HOSE AS | |
| 6. | 336-3575 I | [1] | HOSE AS | |
| 7. | 388-9406 C | [1] | BRACKET AS | |
| 8. | 148-8323 | [1] | CONNECTOR AS | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-9875 | [1] | CONNECTOR | ||
| 9. | 4J-0520 | [3] | SEAL-O-RING | |
| 10. | 6V-8149 M | [1] | NUT (M12X1.75-THD) | |
| 11. | 7G-5984 | [1] | CLIP (TAB) | |
| 12. | 7G-5985 | [1] | CLIP (SLOT) | |
| 13. | 7G-5986 | [1] | GROMMET | |
| 14. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
| 15. | 8C-3206 | [2] | FLANGE-HALF | |
| 16. | 8E-6303 | [1] | CLIP (TAB) | |
| 17. | 8E-6304 | [1] | CLIP (SLOT) | |
| 18. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 21. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 22. | 8T-4194 M | [1] | BOLT (M12X1.75X50-MM) | |
| 23. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 24. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 431-1414 C | [1] | CABLE AS (POSITION SENSING) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3121 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 26. | 347-4734 C | [1] | CLIP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58050939
335-8333: CYLINDER & LINES GP
335-8333 CYLINDER & LINES GP -POSITION SENSING, RH
S/N FCT1-UP
PART OF 386-0491 CYLINDER & LINES GP
FOR USE WITH @@@@@335-8332@@@@@
CANNOT BE USED WITH @@@@@338-8656@@@@@, @@@@@338-8657@@@@@
AN ATTACHMENT
S/N FCT1-UP
PART OF 386-0491 CYLINDER & LINES GP
FOR USE WITH @@@@@335-8332@@@@@
CANNOT BE USED WITH @@@@@338-8656@@@@@, @@@@@338-8657@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-6251 | [1] | CONNECTOR AS | |
| 4K-1388 | [1] | SEAL-O-RING | ||
| 6V-8400 | [1] | SEAL-O-RING | ||
| 9X-8260 | [1] | CONNECTOR | ||
| 2. | 222-1222 Y | [1] | CYLINDER GP-BULLDOZER LIFT | |
| 3. | 238-9612 | [1] | BRACKET AS | |
| 4. | 239-0221 | [1] | TUBE AS | |
| 5. | 336-3574 I | [1] | HOSE AS | |
| 6. | 336-3575 I | [1] | HOSE AS | |
| 7. | 353-5525 | [1] | BRACKET AS | |
| 8. | 148-8323 | [1] | CONNECTOR AS | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-9875 | [1] | CONNECTOR | ||
| 9. | 4J-0520 | [3] | SEAL-O-RING | |
| 10. | 6V-8149 M | [1] | NUT (M12X1.75-THD) | |
| 11. | 7G-5984 | [1] | CLIP (TAB) | |
| 12. | 7G-5985 | [1] | CLIP (SLOT) | |
| 13. | 7G-5986 | [1] | GROMMET | |
| 14. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
| 15. | 8C-3206 | [2] | FLANGE-HALF | |
| 16. | 8E-6303 | [1] | CLIP (TAB) | |
| 17. | 8E-6304 | [1] | CLIP (SLOT) | |
| 18. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 21. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 22. | 8T-4194 M | [1] | BOLT (M12X1.75X50-MM) | |
| 23. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 24. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
