IMPLEMENTS
BULLDOZER GPLINES GP-GREASE
IMPLEMENTS
BULLDOZER GP
#SEBP58080910
346-6924: INSTALLATION AR-BULLDOZER
346-6924 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N JJW1-194
DUAL TILT
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
S/N JJW1-194
DUAL TILT
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8053 | [2] | PIN | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 4. | 6J-5985 | [2] | PIN | |
| 5. | 6J-5986 | [4] | RETAINER | |
| 6. | 6J-7500 | [2] | RETAINER | |
| 7. | 7T-4809 | [4] | SPACER (96.5X114.3X16.5-MM THK) | |
| 8. | 7T-4810 | [2] | PIN | |
| 9. | 9J-2365 | [2] | RETAINER | |
| 10. | 9J-6073 Y | [1] | TRUNNION GP-BULLDOZER | |
| 11. | 9W-2939 | [2] | PIN | |
| 12. | 137-8479 B | [6] | SHIM (2-MM THK) | |
| 13. | 138-2828 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 13A. | 3G-8052 | [4] | BEARING | |
| 14. | 346-6918 Y | [1] | PUSH ARM GP | |
| 15. | 346-6920 Y | [1] | LINES GP-TILT CYLINDER | |
| 17. | 7X-0379 | [8] | BOLT (7/8-9X1.5-IN) | |
| 18. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD NEAR TOP AT RIGHT END) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58080911
346-6924: INSTALLATION AR-BULLDOZER
346-6924 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N JJW195-UP
DUAL TILT
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
S/N JJW195-UP
DUAL TILT
FOR USE WITH BLADE & EDGE GP-UNIVERSAL/SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8053 | [2] | PIN | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 4. | 6J-5985 | [2] | PIN | |
| 5. | 6J-5986 | [4] | RETAINER | |
| 6. | 6J-7500 | [2] | RETAINER | |
| 7. | 7T-4809 | [4] | SPACER (96.5X114.3X16.5-MM THK) | |
| 8. | 7T-4810 | [2] | PIN | |
| 9. | 9J-2365 | [2] | RETAINER | |
| 10. | 9J-6073 Y | [1] | TRUNNION GP-BULLDOZER | |
| 11. | 9W-2939 | [2] | PIN | |
| 12. | 137-8479 B | [6] | SHIM (2-MM THK) | |
| 13. | 138-2828 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 13A. | 3G-8052 | [4] | BEARING | |
| 14. | 346-6918 Y | [1] | PUSH ARM GP | |
| 15. | 491-8159 CY | [1] | LINES GP-TILT CYLINDER | |
| 17. | 7X-0379 | [8] | BOLT (7/8-9X1.5-IN) | |
| 18. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58080912
422-0255: INSTALLATION AR-BULLDOZER
422-0255 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N JJW1-194
ABRASION RESISTANT, DUAL TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
S/N JJW1-194
ABRASION RESISTANT, DUAL TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8053 | [2] | PIN | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 4. | 6J-5985 | [2] | PIN | |
| 5. | 6J-5986 | [4] | RETAINER | |
| 6. | 6J-7500 | [2] | RETAINER | |
| 7. | 7T-4809 | [4] | SPACER (96.5X114.3X16.5-MM THK) | |
| 8. | 7T-4810 | [2] | PIN | |
| 9. | 9J-2365 | [2] | RETAINER | |
| 10. | 9J-6073 Y | [1] | TRUNNION GP-BULLDOZER | |
| 11. | 9W-2939 | [2] | PIN | |
| 12. | 137-8479 | [6] | SHIM (2-MM THK) | |
| 13. | 138-2828 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3G-8052 | [4] | BEARING | ||
| 14. | 346-6918 Y | [1] | PUSH ARM GP (SEMI-UNIVERSAL, UNIVERSAL) | |
| 16. | 422-0252 Y | [1] | LINES GP-TILT CYLINDER | |
| 17. | 7X-0379 | [8] | BOLT (7/8-9X1.5-IN) | |
| 18. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER | ||
| (ON BACK OF MOLDBOARD NEAR TOP RN END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58080913
422-0255: INSTALLATION AR-BULLDOZER
422-0255 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N JJW195-UP
ABRASION RESISTANT, DUAL TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
S/N JJW195-UP
ABRASION RESISTANT, DUAL TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8053 | [2] | PIN | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 4. | 6J-5985 | [2] | PIN | |
| 5. | 6J-5986 | [4] | RETAINER | |
| 6. | 6J-7500 | [2] | RETAINER | |
| 7. | 7T-4809 | [4] | SPACER (96.5X114.3X16.5-MM THK) | |
| 8. | 7T-4810 | [2] | PIN | |
| 9. | 9J-2365 | [2] | RETAINER | |
| 10. | 9J-6073 Y | [1] | TRUNNION GP-BULLDOZER | |
| 11. | 9W-2939 | [2] | PIN | |
| 12. | 137-8479 | [6] | SHIM (2-MM THK) | |
| 13. | 138-2828 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 13A. | 3G-8052 | [4] | BEARING | |
| 14. | 346-6918 Y | [1] | PUSH ARM GP (SEMI-UNIVERSAL, UNIVERSAL) | |
| 16. | 491-8160 CY | [1] | LINES GP-TILT CYLINDER | |
| 17. | 7X-0379 | [8] | BOLT (7/8-9X1.5-IN) | |
| 18. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58080914
422-0256: INSTALLATION AR-BULLDOZER
422-0256 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N JJW1-194
SINGLE TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
S/N JJW1-194
SINGLE TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8053 | [2] | PIN | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 4. | 6J-5985 | [2] | PIN | |
| 5. | 6J-5986 | [4] | RETAINER | |
| 6. | 6J-7500 | [2] | RETAINER | |
| 7. | 7T-4809 | [4] | SPACER (96.5X114.3X16.5-MM THK) | |
| 8. | 7T-4810 | [2] | PIN | |
| 9. | 9J-2365 | [2] | RETAINER | |
| 10. | 9J-6073 Y | [1] | TRUNNION GP-BULLDOZER | |
| 11. | 9W-2939 | [2] | PIN | |
| 12. | 137-8479 | [6] | SHIM (2-MM THK) | |
| 13. | 138-2828 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3G-8052 | [4] | BEARING | ||
| 15. | 422-0251 Y | [1] | PUSH ARM GP-STABILIZER | |
| 16. | 422-0253 Y | [1] | LINES GP-TILT CYLINDER | |
| 17. | 7X-0379 | [8] | BOLT (7/8-9X1.5-IN) | |
| 18. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58080915
422-0256: INSTALLATION AR-BULLDOZER
422-0256 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N JJW195-UP
SINGLE TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
S/N JJW195-UP
SINGLE TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8053 | [2] | PIN | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 4. | 6J-5985 | [2] | PIN | |
| 5. | 6J-5986 | [4] | RETAINER | |
| 6. | 6J-7500 | [2] | RETAINER | |
| 7. | 7T-4809 | [4] | SPACER (96.5X114.3X16.5-MM THK) | |
| 8. | 7T-4810 | [2] | PIN | |
| 9. | 9J-2365 | [2] | RETAINER | |
| 10. | 9J-6073 Y | [1] | TRUNNION GP-BULLDOZER | |
| 11. | 9W-2939 | [2] | PIN | |
| 12. | 137-8479 | [6] | SHIM (2-MM THK) | |
| 13. | 138-2828 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 13A. | 3G-8052 | [4] | BEARING | |
| 15. | 422-0251 Y | [1] | PUSH ARM GP-STABILIZER | |
| 16. | 491-8161 CY | [1] | LINES GP-TILT CYLINDER | |
| 17. | 7X-0379 | [8] | BOLT (7/8-9X1.5-IN) | |
| 18. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58080916
422-0257: INSTALLATION AR-BULLDOZER
422-0257 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N JJW1-194
ABRASION RESISTANT, SINGLE TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
S/N JJW1-194
ABRASION RESISTANT, SINGLE TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8053 | [2] | PIN | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 4. | 6J-5985 | [2] | PIN | |
| 5. | 6J-5986 | [4] | RETAINER | |
| 6. | 6J-7500 | [2] | RETAINER | |
| 7. | 7T-4809 | [4] | SPACER (96.5X114.3X16.5-MM THK) | |
| 8. | 7T-4810 | [2] | PIN | |
| 9. | 9J-2365 | [2] | RETAINER | |
| 10. | 9J-6073 Y | [1] | TRUNNION GP-BULLDOZER | |
| 11. | 9W-2939 | [2] | PIN | |
| 12. | 137-8479 | [6] | SHIM (2-MM THK) | |
| 13. | 138-2828 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3G-8052 | [4] | BEARING | ||
| 15. | 422-0251 Y | [1] | PUSH ARM GP-STABILIZER | |
| 16. | 422-0254 Y | [1] | LINES GP-TILT CYLINDER | |
| 17. | 7X-0379 | [8] | BOLT (7/8-9X1.5-IN) | |
| 18. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58080917
422-0257: INSTALLATION AR-BULLDOZER
422-0257 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL, UNIVERSAL
S/N JJW195-UP
ABRASION RESISTANT, SINGLE TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
S/N JJW195-UP
ABRASION RESISTANT, SINGLE TILT
FOR USE WITH BLADE GP-EDGE UNIVERSAL, BLADE GP-EDGE SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8053 | [2] | PIN | |
| 2. | 4T-3797 | [2] | CONNECTOR | |
| 4. | 6J-5985 | [2] | PIN | |
| 5. | 6J-5986 | [4] | RETAINER | |
| 6. | 6J-7500 | [2] | RETAINER | |
| 7. | 7T-4809 | [4] | SPACER (96.5X114.3X16.5-MM THK) | |
| 8. | 7T-4810 | [2] | PIN | |
| 9. | 9J-2365 | [2] | RETAINER | |
| 10. | 9J-6073 Y | [1] | TRUNNION GP-BULLDOZER | |
| 11. | 9W-2939 | [2] | PIN | |
| 12. | 137-8479 | [6] | SHIM (2-MM THK) | |
| 13. | 138-2828 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 13A. | 3G-8052 | [4] | BEARING | |
| 15. | 422-0251 Y | [1] | PUSH ARM GP-STABILIZER | |
| 16. | 491-8162 CY | [1] | LINES GP-TILT CYLINDER | |
| 17. | 7X-0379 | [8] | BOLT (7/8-9X1.5-IN) | |
| 18. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58080918
379-4555: LINES GP-GREASE
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [8] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 8C-6915 | [3] | ADAPTER-BULKHEAD | |
| 3. | 140-9267 I | [1] | HOSE AS | |
| 4. | 144-0337 I | [1] | HOSE AS | |
| 5. | 185-1924 I | [2] | HOSE AS | |
| 6. | 253-1549 I | [1] | HOSE AS | |
| 7. | 294-5169 I | [1] | HOSE AS | |
| 8. | 301-7422 I | [2] | HOSE AS | |
| 9. | 340-2729 | [1] | MANIFOLD | |
| 10. | 344-8099 | [1] | PLATE AS | |
| 11. | 381-2294 | [1] | BRACKET AS | |
| 12. | 381-2295 | [8] | CLAMP AS | |
| 13. | 129-3180 M | [8] | LOCKNUT (M12X1.75-THD) | |
| 14. | 148-8316 | [5] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8647 | [1] | CONNECTOR | ||
| 15. | 148-8320 | [8] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 8C-6865 | [1] | CONNECTOR | ||
| 16. | 148-8413 | [3] | REDUCER AS | |
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8934 | [1] | ADAPTER | ||
| 17. | 4D-9517 | [4] | CLIP (SLOT) | |
| 18. | 4M-8973 | [2] | ELBOW | |
| 19. | 5S-7379 | [3] | BOLT (3/8-16X0.875-IN) | |
| 20. | 6K-6967 | [6] | ADAPTER-PIPE | |
| 21. | 6V-0826 | [12] | GROMMET | |
| 22. | 6V-8397 | [3] | SEAL-O-RING | |
| 23. | 6V-9168 | [3] | NUT (11/16-16-THD) | |
| 24. | 8L-5008 | [4] | ELBOW-PIPE | |
| 25. | 8T-0668 M | [1] | BOLT (M24X3X110-MM) | |
| 26. | 8T-1889 | [12] | CLIP (SLOT) | |
| 27. | 8T-1890 | [12] | CLIP (TAB) | |
| 28. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 30. | 8T-4139 M | [14] | BOLT (M12X1.75X30-MM) | |
| 31. | 8T-4167 | [1] | WASHER-HARD (26X44X4-MM THK) | |
| 32. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 33. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 34. | 8T-4648 M | [2] | BOLT (M12X1.75X70-MM) | |
| 35. | 9X-2027 | [3] | WASHER (11X18X2-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP58080919
379-4555: LINES GP-GREASE
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [8] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 8C-6915 | [3] | ADAPTER-BULKHEAD | |
| 3. | 522-6678 C | [1] | HOSE AS | |
| 4. | 144-0337 I | [1] | HOSE AS | |
| 5. | 185-1924 I | [2] | HOSE AS | |
| 6. | 253-1549 I | [1] | HOSE AS | |
| 7. | 294-5169 I | [1] | HOSE AS | |
| 8. | 301-7422 I | [2] | HOSE AS | |
| 9. | 340-2729 | [1] | MANIFOLD | |
| 10. | 520-3545 C | [1] | PLATE AS | |
| 11. | 381-2294 | [1] | BRACKET AS | |
| 12. | 9M-4995 C | [1] | CLIP | |
| 14. | 148-8316 | [5] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8647 | [1] | CONNECTOR | ||
| 15. | 148-8320 | [8] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 8C-6865 | [1] | CONNECTOR | ||
| 16. | 148-8413 | [3] | REDUCER AS | |
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8934 | [1] | ADAPTER | ||
| 17. | 4D-9517 | [4] | CLIP (SLOT) | |
| 18. | 4M-8973 | [2] | ELBOW | |
| 19. | 5S-7379 | [3] | BOLT (3/8-16X0.875-IN) | |
| 20. | 6K-6967 | [6] | ADAPTER-PIPE | |
| 21. | 6V-0826 C | [10] | GROMMET | |
| 22. | 6V-8397 | [3] | SEAL-O-RING | |
| 23. | 6V-9168 | [3] | NUT (11/16-16-THD) | |
| 24. | 8L-5008 | [4] | ELBOW-PIPE | |
| 25. | 7X-2454 CM | [1] | BOLT (M24X3X110-MM) | |
| 26. | 8T-1889 C | [10] | CLIP (SLOT) | |
| 27. | 8T-1890 C | [10] | CLIP (TAB) | |
| 28. | 8T-4121 C | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4136 CM | [11] | BOLT (M10X1.5X25-MM) | |
| 31. | 8T-4167 | [1] | WASHER-HARD (26X44X4-MM THK) | |
| 33. | 8T-4223 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 34. | 8T-4648 M | [2] | BOLT (M12X1.75X70-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
