AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

361-4928 LINES GP-ANGLE & TILT S/N PER1-UP PART OF 387-7390 BULLDOZER AR CANNOT BE USED WITH SEMI-UNIVERSAL BULLDOZER AN ATTACHMENT D6N LGP


HYDRAULIC SYSTEM
LINES GP-CYLINDER

TRACK-TYPE TRACTOR D6N LGP TRACK-TYPE TRACTOR PBA
 D6N TRACK-TYPE TRACTOR XL, LGP PBA00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP5812 D6N LGP PBA   (2012)

HYDRAULIC SYSTEM

LINES GP-CYLINDER
LINES GP-ANGLE & TILT
348-7219 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4928 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4928 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4929 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4929 LINES GP-ANGLE & TILT
 

#SEBP58120610
 

361-4928: LINES GP-ANGLE & TILT

361-4928 LINES GP-ANGLE & TILT
S/N PER1-UP
PART OF 387-7390 BULLDOZER AR
CANNOT BE USED WITH SEMI-UNIVERSAL BULLDOZER
AN ATTACHMENT
i04647890 SEBP5812
3614928 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [2] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 357-4371 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4934 [1] CHANNEL AS (RH)  
8. 361-4935 [1] CHANNEL AS (LH)  
9. 361-4939 I [2] HOSE AS  
10. 361-4940 I [2] HOSE AS  
11. 361-4941 I [1] HOSE AS  
12. 371-4000 I [1] HOSE AS  
13. 387-5239 [2] GUARD AS  
14. 3B-6552 [2] ELBOW-PIPE  
15. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
16. 3G-8047 [2] GROMMET  
17. 3G-8054 [2] CLIP (TAB)  
18. 3G-8057 [2] CLIP (SLOT)  
19. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
20. 5P-7464 [6] CLIP (SLOT)  
21. 5P-7465 [6] CLIP (TAB)  
22. 6V-1249 [6] GROMMET (22-MM ID)  
23. 6V-8398 [6] SEAL-O-RING  
24. 7C-4354 [4] CLIP  
25. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [6] NUT (M10X1.5-THD)  
27. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
28. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
29. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
30. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
31. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
32. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4244 M [2] NUT (M12X1.75-THD)  
34. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
35. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 096-7033 [2] PIN-COTTER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP58120611
 

361-4928: LINES GP-ANGLE & TILT

361-4928 LINES GP-ANGLE & TILT
S/N PER1-UP
PART OF 387-7390 BULLDOZER AR
CANNOT BE USED WITH SEMI-UNIVERSAL BULLDOZER
AN ATTACHMENT
i05591540 SEBP5812
3614928 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [2] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 148-8340 C [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4934 [1] CHANNEL AS (RH)  
8. 361-4935 [1] CHANNEL AS (LH)  
9. 361-4939 CI [2] HOSE AS  
10. 361-4940 I [2] HOSE AS  
11. 361-4941 I [1] HOSE AS  
12. 371-4000 I [1] HOSE AS  
13. 387-5239 [2] GUARD AS  
14. 3B-6552 [2] ELBOW-PIPE  
15. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
16. 3G-8047 [2] GROMMET  
17. 3G-8054 [2] CLIP (TAB)  
18. 3G-8057 [2] CLIP (SLOT)  
19. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
20. 5P-7464 [6] CLIP (SLOT)  
21. 5P-7465 [6] CLIP (TAB)  
22. 6V-1249 [6] GROMMET (22-MM ID)  
23. 6V-8398 [6] SEAL-O-RING  
25. 8T-4121 C [14] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 CM [4] NUT (M10X1.5-THD)  
27. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
28. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
30. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
31. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
32. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4244 M [2] NUT (M12X1.75-THD)  
34. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
35. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 5P-0370 C [2] LOCK PIN  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP58120612
 

361-4929: LINES GP-ANGLE & TILT

361-4929 LINES GP-ANGLE & TILT
S/N PBA1-UP; PER1-UP
PART OF 387-7391 BULLDOZER AR
AN ATTACHMENT
i04611049 SEBP5812
3614929 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [2] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 357-4371 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4934 [1] CHANNEL AS (RH)  
8. 361-4935 [1] CHANNEL AS (LH)  
9. 361-4936 [2] CHANNEL AS  
10. 361-4942 I [2] HOSE AS  
11. 361-4943 I [2] HOSE AS  
12. 361-4944 I [1] HOSE AS  
13. 371-4001 I [1] HOSE AS  
14. 3B-6552 [2] ELBOW-PIPE  
15. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
16. 3G-8047 [2] GROMMET  
17. 3G-8054 [2] CLIP (TAB)  
18. 3G-8057 [2] CLIP (SLOT)  
19. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
20. 5P-7464 [6] CLIP (SLOT)  
21. 5P-7465 [6] CLIP (TAB)  
22. 6V-1249 [6] GROMMET (22-MM ID)  
23. 6V-8398 [6] SEAL-O-RING  
24. 7C-4354 [4] CLIP  
25. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [6] NUT (M10X1.5-THD)  
27. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
28. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
29. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
30. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
31. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
32. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4244 M [2] NUT (M12X1.75-THD)  
34. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
35. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 096-7033 [2] PIN-COTTER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP58120613
 

361-4929: LINES GP-ANGLE & TILT

361-4929 LINES GP-ANGLE & TILT
S/N PBA1-UP
PART OF 387-7391 BULLDOZER AR
AN ATTACHMENT
i05591551 SEBP5812
3614929 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [2] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 148-8340 C [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4934 [1] CHANNEL AS (RH)  
8. 361-4935 [1] CHANNEL AS (LH)  
9. 361-4936 [2] CHANNEL AS  
10. 361-4942 CI [2] HOSE AS  
11. 361-4943 I [2] HOSE AS  
12. 361-4944 I [1] HOSE AS  
13. 371-4001 I [1] HOSE AS  
14. 3B-6552 [2] ELBOW-PIPE  
15. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
16. 3G-8047 [2] GROMMET  
17. 3G-8054 [2] CLIP (TAB)  
18. 3G-8057 [2] CLIP (SLOT)  
19. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
20. 5P-7464 [6] CLIP (SLOT)  
21. 5P-7465 [6] CLIP (TAB)  
22. 6V-1249 [6] GROMMET (22-MM ID)  
23. 6V-8398 [6] SEAL-O-RING  
25. 8T-4121 C [14] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 CM [4] NUT (M10X1.5-THD)  
27. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
28. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
30. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
31. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
32. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4244 M [2] NUT (M12X1.75-THD)  
34. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
35. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 5P-0370 C [2] LOCK PIN  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP58120614
 

362-5373: LINES GP-ANGLE & TILT

362-5373 LINES GP-ANGLE & TILT
S/N PER1-UP
PART OF 387-7392 BULLDOZER AR
Type 1
FOR USE WITH FORESTRY, C-FRAME GP-POWER ANGLING
CANNOT BE USED WITH BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i04647934 SEBP5812
3625373 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [4] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 357-4371 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4930 [1] COVER  
8. 361-4931 [1] COVER  
9. 361-4934 [1] CHANNEL AS  
10. 361-4935 [1] CHANNEL AS  
11. 361-4939 I [2] HOSE AS  
12. 361-4940 I [2] HOSE AS  
13. 361-4941 I [1] HOSE AS  
14. 362-1406 [1] COVER AS (LH)  
15. 362-1407 [1] COVER AS (RH)  
16. 371-4000 I [1] HOSE AS  
17. 387-5239 [2] GUARD AS  
18. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
19. 3B-6552 [2] ELBOW-PIPE  
20. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
21. 3G-8047 [2] GROMMET  
22. 3G-8054 [2] CLIP (TAB)  
23. 3G-8057 [2] CLIP (SLOT)  
24. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
25. 5P-7464 [6] CLIP (SLOT)  
26. 5P-7465 [6] CLIP (TAB)  
27. 6V-1249 [6] GROMMET (22-MM ID)  
28. 6V-8398 [6] SEAL-O-RING  
29. 7C-4354 [4] CLIP  
30. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 M [6] NUT (M10X1.5-THD)  
32. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
33. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
34. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
35. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
36. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
37. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 8T-4244 M [2] NUT (M12X1.75-THD)  
39. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
40. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
41. 096-7033 [4] PIN-COTTER  
42. 202-5293 L SEAL (4-DM EACH)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  L   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP58120615
 

362-5373: LINES GP-ANGLE & TILT

362-5373 LINES GP-ANGLE & TILT
S/N PER1-UP
PART OF 387-7392 BULLDOZER AR
Type 2
FOR USE WITH FORESTRY, C-FRAME GP-POWER ANGLING
CANNOT BE USED WITH BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i05591573 SEBP5812
3625373 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [4] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 148-8340 C [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4930 [1] COVER  
8. 361-4931 [1] COVER  
9. 361-4934 [1] CHANNEL AS  
10. 361-4935 [1] CHANNEL AS  
11. 361-4939 CI [2] HOSE AS  
12. 361-4940 I [2] HOSE AS  
13. 361-4941 I [1] HOSE AS  
14. 452-9237 [1] COVER AS (LH)  
15. 452-9239 [1] COVER AS (RH)  
16. 371-4000 I [1] HOSE AS  
17. 387-5239 [2] GUARD AS  
18. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
19. 3B-6552 [2] ELBOW-PIPE  
20. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
21. 3G-8047 [2] GROMMET  
22. 3G-8054 [2] CLIP (TAB)  
23. 3G-8057 [2] CLIP (SLOT)  
24. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
25. 5P-7464 [6] CLIP (SLOT)  
26. 5P-7465 [6] CLIP (TAB)  
27. 6V-1249 [6] GROMMET (22-MM ID)  
28. 6V-8398 [6] SEAL-O-RING  
30. 8T-4121 C [14] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 CM [4] NUT (M10X1.5-THD)  
32. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
33. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
35. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
36. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
37. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 8T-4244 M [2] NUT (M12X1.75-THD)  
39. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
40. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
41. 5P-0370 C [4] LOCK PIN  
42. 202-5293 L SEAL (4-DM EACH)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  L   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP58120616
 

362-5374: LINES GP-ANGLE & TILT

362-5374 LINES GP-ANGLE & TILT
S/N PBA1-UP; PER1-UP
PART OF 387-7393 BULLDOZER AR
FOR USE WITH FORESTRY, C-FRAME GP-POWER ANGLING
AN ATTACHMENT
i04624681 SEBP5812
3625374 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [4] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
6. 357-4371 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 361-4932 [1] COVER  
8. 361-4933 [1] COVER  
9. 361-4934 [1] CHANNEL AS (RH)  
10. 361-4935 [1] CHANNEL AS (LH)  
11. 361-4936 [2] CHANNEL AS  
12. 361-4942 I [2] HOSE AS  
13. 361-4943 I [2] HOSE AS  
14. 361-4944 I [1] HOSE AS  
15. 362-1406 [1] COVER AS (LH)  
16. 362-1407 [1] COVER AS (RH)  
17. 371-4001 I [1] HOSE AS  
18. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
19. 3B-6552 [2] ELBOW-PIPE  
20. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
21. 3G-8047 [2] GROMMET  
22. 3G-8054 [2] CLIP (TAB)  
23. 3G-8057 [2] CLIP (SLOT)  
24. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
25. 5P-7464 [6] CLIP (SLOT)  
26. 5P-7465 [6] CLIP (TAB)  
27. 6V-1249 [6] GROMMET (22-MM ID)  
28. 6V-8398 [6] SEAL-O-RING  
29. 7C-4354 [4] CLIP  
30. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 M [6] NUT (M10X1.5-THD)  
32. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
33. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
34. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
35. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
36. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
37. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 8T-4244 M [2] NUT (M12X1.75-THD)  
39. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
40. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
41. 096-7033 [4] PIN-COTTER  
42. 202-5293 L SEAL (4-DM EACH)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  L   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP58120617
 

362-5374: LINES GP-ANGLE & TILT

362-5374 LINES GP-ANGLE & TILT
S/N PBA1569-UP
PART OF 387-7393 BULLDOZER AR
FOR USE WITH FORESTRY, C-FRAME GP-POWER ANGLING
AN ATTACHMENT
i05650231 SEBP5812
3625374 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6N LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-2477 [4] PIN  
2. 294-5374 [2] PLATE  
3. 294-7278 [2] PLATE  
4. 306-8866 [2] BAFFLE AS  
    (EACH INCLUDES)
  7G-5186 [4] SPACER (13X19X4.5-MM THK)  
5. 346-9728 [2] HOSE AS  
7. 361-4932 [1] COVER  
8. 361-4933 [1] COVER  
9. 361-4934 [1] CHANNEL AS (RH)  
10. 361-4935 [1] CHANNEL AS (LH)  
11. 361-4936 [2] CHANNEL AS  
12. 361-4942 CI [2] HOSE AS  
13. 361-4943 I [2] HOSE AS  
14. 361-4944 I [1] HOSE AS  
15. 452-9237 [1] COVER AS (LH)  
16. 452-9239 [1] COVER AS (RH)  
17. 371-4001 I [1] HOSE AS  
18. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
19. 3B-6552 [2] ELBOW-PIPE  
20. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
21. 3G-8047 [2] GROMMET  
22. 3G-8054 [2] CLIP (TAB)  
23. 3G-8057 [2] CLIP (SLOT)  
24. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
25. 5P-7464 [6] CLIP (SLOT)  
26. 5P-7465 [6] CLIP (TAB)  
27. 6V-1249 [6] GROMMET (22-MM ID)  
28. 6V-8398 [6] SEAL-O-RING  
30. 8T-4121 C [14] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 CM [4] NUT (M10X1.5-THD)  
32. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
33. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
35. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
36. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
37. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 8T-4244 M [2] NUT (M12X1.75-THD)  
39. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
40. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
41. 5P-0370 C [4] LOCK PIN  
42. 202-5293 L SEAL (4-DM EACH)  
43. 148-8340 C [6] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  L   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP58120618
 

271-8871: LINES GP-LIFT CYLINDER

271-8871 LINES GP-LIFT CYLINDER
S/N XSX1-UP
PART OF 383-3400 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i02554972 SEBP5812
2718871 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6N LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8341 [4] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8713 [1] CONNECTOR  
  3D-2824 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
2. 272-1387 I [2] HOSE AS  
3. 272-1388 I [2] HOSE AS  
4. 5P-7464 [4] CLIP (SLOT)  
5. 5P-7465 [4] CLIP (TAB)  
6. 5P-7468 [2] CLIP (SLOT)  
7. 5P-7469 [2] CLIP (TAB)  
8. 6V-7359 [4] GROMMET (25-MM ID, 37-MM OD)  
9. 7G-3833 [2] CLIP (TAB)  
10. 7G-3834 [2] CLIP (SLOT)  
11. 8C-3174 [2] GROMMET  
12. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
14. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
15. 329-3356 M [4] NUT (M12X1.75-THD)  
16. 7X-3392 [8] WASHER-HARD (13.5X22.5X3-MM THK)  
17. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP58120619
 

348-7220: LINES GP-LIFT CYLINDER

348-7220 LINES GP-LIFT CYLINDER
S/N PBA1-UP; PER1-UP
PART OF 328-3752 HYDRAULIC AR
i04600550 SEBP5812
3487220 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6N LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 310-4601 [1] TUBE AS  
2. 310-4602 [1] TUBE AS  
3. 343-3402 [1] TUBE AS  
4. 343-3403 [1] TUBE AS  
5. 354-2495 [1] BRACKET AS (RH)  
6. 354-2496 [1] BRACKET AS (LH)  
7. 357-4378 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
8. 357-4476 [1] ELBOW AS  
  6V-8982 [1] ELBOW  
  7J-9108 [2] SEAL-O-RING  
10. 6V-9170 [4] NUT-BULKHEAD (1-14-THD)  
11. 6V-9746 [2] SEAL-O-RING  
12. 7J-9108 [3] SEAL-O-RING  
13. 7X-7729 [4] WASHER (11X25X3-MM THK)  
14. 8T-1887 [2] CLIP (SLOT)  
15. 8T-1888 [2] CLIP (TAB)  
16. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4133 M [2] NUT (M10X1.5-THD)  
18. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
19. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
20. 9M-8406 [4] CLIP (LOOP)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D6N LGP :

LINES GP-ANGLE & TILT
348-7219 LINES GP-ANGLE & TILT
HYDRAULIC AR-4 VALVE
368-4763 HYDRAULIC AR-4 VALVE
HYDRAULIC AR-4 VALVE
351-6536 HYDRAULIC AR-4 VALVE
HYDRAULIC AR-3 VALVE
368-4762 HYDRAULIC AR-3 VALVE
388-1184 HYDRAULIC AR
328-3752 HYDRAULIC AR
FILTER GP-OIL
169-4019 FILTER GP-OIL
CYLINDER GP-TILT
233-9134 CYLINDER GP-TILT
LINES GP-ANGLE & TILT
361-4928 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4929 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
361-4929 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
362-5373 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
362-5373 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
362-5374 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
362-5374 LINES GP-ANGLE & TILT
LINES GP-LIFT CYLINDER
271-8871 LINES GP-LIFT CYLINDER
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.