AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

329-5064 VALVE GP-SOLENOID S/N JZC1-UP; EJJ1-UP; RRK1-UP 24-VOLT PART OF 325-1699 MANIFOLD GP-CONTROL D6T LGP


HYDRAULIC SYSTEM
VALVE GP-SOLENOID
IMPLEMENTS
BULLDOZER GP
C-FRAME GP
LINES GP-GREASE

TRACK-TYPE TRACTOR D6T LGP TRACK-TYPE TRACTOR EJJ
 D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT EJJ00001-UP (MACHINE) POWERED BY C9 Engine SEBP5815 D6T LGP EJJ   (2011)

HYDRAULIC SYSTEM

VALVE GP-SOLENOID
VALVE GP-SOLENOID
152-8340 VALVE GP-SOLENOID
VALVE GP-SOLENOID
201-0950 VALVE GP-SOLENOID
VALVE GP-SOLENOID
313-7668 VALVE GP-SOLENOID
VALVE GP-SOLENOID
329-5064 VALVE GP-SOLENOID
 

#SEBP58150870
 

329-5064: VALVE GP-SOLENOID

329-5064 VALVE GP-SOLENOID
S/N JZC1-UP; EJJ1-UP; RRK1-UP
24-VOLT
PART OF 325-1699 MANIFOLD GP-CONTROL
i04430299 SEBP5815
3295064 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your D6T LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 156-5970 [1] NUT (1/2-20-THD)  
2. 249-0981 [1] COIL AS (24-VOLT)  
   
    AVAILABLE REPAIR KIT(S):
  195-7430 [1] KIT-SEAL (SOLENOID VALVE)  
    (INCLUDES SEALS & RINGS)
 

#SEBP58150871
 

334-1804: BULLDOZER AR-PWR ANGLE & TILT

334-1804 BULLDOZER AR-PWR ANGLE & TILT
S/N JZC1-304
AN ATTACHMENT
i04525121 SEBP5815
3341804 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-8893 Y [1] CYLINDER GP-TILT  
2. 344-5133 Y [2] CYLINDER GP-ANGLING  
3. 312-7759 Y [1] C-FRAME GP  
4. 381-1880 Y [1] LINK GP-PITCH  
5. 325-9754 Y [1] CYLINDER & LINES GP-LIFT (LH)  
6. 325-9758 Y [1] CYLINDER & LINES GP-LIFT (RH)  
7. 334-1787 Y [1] BLADE GP-ANGLING  
8. 334-1790 Y [1] LINES GP-ANGLE & TILT  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BLADE)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP58150872
 

334-1804: BULLDOZER AR-PWR ANGLE & TILT

334-1804 BULLDOZER AR-PWR ANGLE & TILT
S/N JZC305-UP
AN ATTACHMENT
i05753482 SEBP5815
3341804 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-8893 Y [1] CYLINDER GP-TILT  
2. 448-1988 CY [2] CYLINDER GP-ANGLING  
3. 312-7759 Y [1] C-FRAME GP  
4. 381-1880 Y [1] LINK GP-PITCH  
5. 325-9754 Y [1] CYLINDER & LINES GP-LIFT (LH)  
6. 325-9758 Y [1] CYLINDER & LINES GP-LIFT (RH)  
7. 334-1787 Y [1] BLADE GP-ANGLING  
8. 334-1790 Y [1] LINES GP-ANGLE & TILT  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BLADE)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP58150873
 

334-1805: BULLDOZER AR-PWR ANGLE & TILT

334-1805 BULLDOZER AR-PWR ANGLE & TILT
S/N EJJ1-UP; RRK1-299
AN ATTACHMENT
i04523403 SEBP5815
3341805 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-8893 Y [1] CYLINDER GP-TILT  
2. 448-1988 Y [2] CYLINDER GP-ANGLING  
3. 312-7759 Y [1] C-FRAME GP  
4. 381-1880 Y [1] LINK GP-PITCH  
5. 312-7769 Y [1] BLADE GP-ANGLING  
6. 325-9754 Y [1] CYLINDER & LINES GP-LIFT (LH)  
7. 325-9758 Y [1] CYLINDER & LINES GP-LIFT (RH)  
8. 334-1790 Y [1] LINES GP-ANGLE & TILT  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BLADE)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP58150874
 

334-1809: BULLDOZER AR-PWR ANGLE & TILT

334-1809 BULLDOZER AR-PWR ANGLE & TILT
S/N SEC1-308
AN ATTACHMENT
i04523460 SEBP5815
3341809 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-8893 Y [1] CYLINDER GP-TILT  
2. 344-5133 Y [2] CYLINDER GP-ANGLING  
3. 311-7877 Y [1] C-FRAME GP  
4. 311-7886 Y [1] BLADE GP-ANGLING  
5. 381-1880 Y [1] LINK GP-PITCH  
6. 325-9755 Y [1] CYLINDER & LINES GP-LIFT (LH)  
7. 325-9759 Y [1] CYLINDER & LINES GP-LIFT (RH)  
8. 334-1810 Y [1] LINES GP-ANGLE & TILT  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BLADE)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP58150875
 

334-1809: BULLDOZER AR-PWR ANGLE & TILT

334-1809 BULLDOZER AR-PWR ANGLE & TILT
S/N SEC309-UP
AN ATTACHMENT
i05753498 SEBP5815
3341809 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-8893 Y [1] CYLINDER GP-TILT  
2. 448-1988 CY [2] CYLINDER GP-ANGLING  
3. 311-7877 Y [1] C-FRAME GP  
4. 311-7886 Y [1] BLADE GP-ANGLING  
5. 381-1880 Y [1] LINK GP-PITCH  
6. 325-9755 Y [1] CYLINDER & LINES GP-LIFT (LH)  
7. 325-9759 Y [1] CYLINDER & LINES GP-LIFT (RH)  
8. 334-1810 Y [1] LINES GP-ANGLE & TILT  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BLADE)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP58150876
 

311-7877: C-FRAME GP

311-7877 C-FRAME GP
S/N SEC1-UP
PART OF 334-1809 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i04523465 SEBP5815
3117877 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6T LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 9J-4782 [2] PROTECTOR  
3. 9W-7602 B [52] SHIM (0.8-MM THK)  
4. 104-4817 [1] PIN  
5. 193-3063 [2] CAP AS-BEARING  
6. 195-6283 M [4] NUT-SQUARE (M30X3.5-THD)  
7. 223-3279 [1] RETAINER  
8. 226-7190 [2] PIN  
9. 226-7191 [2] RETAINER  
10. 229-1516 [2] SPACER (64X72X18-MM THK)  
11. 229-1517 [4] SPACER (50.8X57.15X18-MM THK)  
12. 245-1168 [1] PIN  
13. 282-6598 [4] SPACER (50.8X57.15X4.73-MM THK)  
14. 282-6604 [2] PIN  
15. 292-6035 [1] PLATE-RETAINER  
16. 311-7878 [1] C-FRAME AS  
16A. 1K-6985 [4] RING-RETAINING  
16B. 9M-1328 [2] BEARING-SELF-ALIGNING  
16C. 274-1715 [2] STEP AS  
16D. 233-3642 [1] TRUNNION AS  
16E. 282-6605 [2] BEARING  
17. 313-9790 [2] SPACER (50.8X57.15X35-MM THK)  
18. 178-2992 M [4] BOLT (M30X3.5X220-MM)  
19. 8T-4123 [3] WASHER (22X35X3.5-MM THK)  
20. 7X-2543 M [4] BOLT (M10X1.5X120-MM)  
21. 8T-6430 M [3] BOLT (M20X2.5X50-MM)  
22. 9X-2327 [4] WASHER (11X18.5X2.5-MM THK)  
23. 9X-8258 [4] WASHER (33X56X6-MM THK)  
24. 8T-7338 M [1] BOLT (M16X2X45-MM)  
25. 7X-0515 [1] WASHER-HARD (17X35X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP58150877
 

312-7759: C-FRAME GP

312-7759 C-FRAME GP
S/N JZC1-UP; EJJ1-UP; RRK1-299
PART OF 334-1804, 334-1805 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i04523455 SEBP5815
3127759 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6T LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-4782 [2] PROTECTOR  
2. 9X-2327 [4] WASHER (11X18.5X2.5-MM THK)  
3. 104-4817 [1] PIN  
4. 193-3063 [2] CAP AS-BEARING  
5. 195-6283 M [4] NUT-SQUARE (M30X3.5-THD)  
6. 223-3279 [1] RETAINER  
7. 226-7190 [2] PIN  
8. 226-7191 [2] RETAINER  
9. 229-1516 [2] SPACER (64X72X18-MM THK)  
10. 229-1517 [4] SPACER (50.8X57.15X18-MM THK)  
11. 245-1168 [1] PIN  
12. 282-6598 [4] SPACER (50.8X57.15X4.73-MM THK)  
13. 282-6604 [2] PIN  
14. 292-6035 [1] PLATE-RETAINER  
15. 312-7760 [1] C-FRAME AS  
15A. 1K-6985 [4] RING-RETAINING  
15B. 9M-1328 [2] BEARING-SELF-ALIGNING  
15C. 274-1715 [2] STEP AS  
15D. 233-3642 [1] TRUNNION AS  
15E. 282-6605 [2] BEARING  
16. 313-9790 [2] SPACER (50.8X57.15X35-MM THK)  
17. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
18. 3E-9850 M [4] BOLT (M30X3.5X220-MM)  
19. 7X-0515 [3] WASHER-HARD (17X35X5-MM THK)  
20. 7X-2543 M [4] BOLT (M10X1.5X120-MM)  
21. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
22. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
23. 8T-7338 M [3] BOLT (M16X2X45-MM)  
24. 9X-8258 [4] WASHER (33X56X6-MM THK)  
25. 9W-7602 [52] SHIM (0.8-MM THK)  
  M   METRIC PART
 

#SEBP58150878
 

362-2183: LINES GP-GREASE

362-2183 LINES GP-GREASE
S/N JZC1-299; EJJ1-299; RRK1-299
PART OF 324-3021 CHASSIS AR, 378-3899 LINES GP-GREASE
ALSO AN ATTACHMENT
i04386975 SEBP5815
3622183 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D6T LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-6915 [1] ADAPTER-BULKHEAD  
2. 9R-6307 [1] SPACER (11X28X12-MM THK)  
3. 347-0162 [1] PLATE  
4. 377-0651 I [1] HOSE AS  
5. 124-0174 [2] CLIP (LOOP)  
6. 148-8316 [1] CONNECTOR AS  
  6V-8647 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
8. 6V-8397 [1] SEAL-O-RING  
9. 6V-9168 [1] NUT (11/16-16-THD)  
10. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
12. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP58150879
 

378-3899: LINES GP-GREASE

378-3899 LINES GP-GREASE
S/N JZC300-UP; EJJ300-UP; RRK300-UP
CANNOT BE USED WITH HIGH SPEED OIL CHANGE
AN ATTACHMENT
i05300607 SEBP5815
3783899 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D6T LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 231-4166 Y [1] SCREEN GP-MAGNETIC (POWER TRAIN)  
2. 362-2183 Y [1] LINES GP-GREASE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D6T LGP :

VALVE GP-SOLENOID
313-7668 VALVE GP-SOLENOID
VALVE GP-SOLENOID
201-0950 VALVE GP-SOLENOID
VALVE GP-SOLENOID
152-8340 VALVE GP-SOLENOID
VALVE GP-SHUTTLE
260-8590 VALVE GP-SHUTTLE
VALVE GP-RELIEF
9T-3533 VALVE GP-RELIEF
VALVE GP-RELIEF
346-3796 VALVE GP-RELIEF
VALVE GP-RELIEF
225-8026 VALVE GP-RELIEF
VALVE GP-RELIEF
166-8498 VALVE GP-RELIEF
BULLDOZER AR-PWR ANGLE & TILT
334-1804 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
334-1804 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
334-1805 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
334-1809 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
334-1809 BULLDOZER AR-PWR ANGLE & TILT
C-FRAME GP
311-7877 C-FRAME GP
C-FRAME GP
312-7759 C-FRAME GP
LINES GP-GREASE
362-2183 LINES GP-GREASE

Truck sale:

Caterpillar D6T LGP
 
Caterpillar D6T LGP
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
Caterpillar D6T LGP WH, Crawler dozers, Construction
179,500 
Caterpillar D6T LGP WH, Crawler dozers, Construction
- Crawler dozers
MACALLISTER MACHINERY CO., INC
Caterpillar D6TLGP, Crawler dozers, Construction
276,900 
Caterpillar D6TLGP, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
Caterpillar D6TLGP, Crawler dozers, Construction
275,000 
Caterpillar D6TLGP, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
Caterpillar D6TLGP, Crawler dozers, Construction
285,000 
Caterpillar D6TLGP, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.