HYDRAULIC SYSTEM
CYLINDER GPPUMP GP
HYDRAULIC GP
OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
LINES GP-BULLDOZERHYDRAULIC SYSTEM
CYLINDER GP
#SEBP58240530
240-7347: CYLINDER GP-TILT
240-7347 CYLINDER GP-TILT -BULLDOZER
S/N RJM1-UP
184.15-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576, 456-2173, 456-2174 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT ORDER @@@@@492-0310@@@@@
AN ATTACHMENT
S/N RJM1-UP
184.15-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576, 456-2173, 456-2174 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT ORDER @@@@@492-0310@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 240-7348 | [1] | CYLINDER AS | |
| 1A. | 1U-2182 | [2] | BUSHING | |
| 2. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
| 3. | 6E-1183 | [1] | PISTON | |
| 4. | 5P-7593 J | [1] | SEAL-O-RING | |
| 5. | 158-3027 J | [1] | RING-BACKUP | |
| 6. | 191-3583 | [1] | HEAD | |
| 7. | 240-7349 | [1] | ROD AS | |
| 7A. | 7J-3297 | [1] | BEARING | |
| 7B. | 8T-9044 | [1] | RING-RETAINING | |
| 8. | 6V-3669 M | [8] | BOLT (M20X2.5X80-MM) | |
| 9. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 10. | 8T-1790 J | [1] | SEAL AS | |
| 11. | 1J-2674 J | [1] | RING-WEAR | |
| 12. | 225-3286 | [1] | SEAL-WIPER | |
| 13. | 167-2324 | [1] | SEAL-U-CUP | |
| 14. | 167-2211 | [1] | SEAL AS-BUFFER | |
| 15. | 8C-5245 J | [1] | RING-WEAR | |
| 16. | 8T-8381 J | [1] | SEAL | |
| 17. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 245-6839 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (INCLUDES RINGS & SEALS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP58240531
491-0252: CYLINDER GP-TILT
491-0252 CYLINDER GP-TILT -BULLDOZER
S/N RJM1-UP
184.2-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576, 456-2173, 456-2174 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT FOR @@@@@492-0310@@@@@
AN ATTACHMENT
S/N RJM1-UP
184.2-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576, 456-2173, 456-2174 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT FOR @@@@@492-0310@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1J-2674 | [1] | RING-WEAR | |
| 2. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
| 4. | 6V-3669 M | [8] | BOLT (M20X2.5X80-MM) | |
| 5. | 8C-5245 | [1] | RING-WEAR | |
| 6. | 8T-1790 | [1] | SEAL AS | |
| 7. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 8. | 8T-8381 | [1] | SEAL | |
| 9. | 158-3027 | [1] | RING-BACKUP | |
| 10. | 191-3583 | [1] | HEAD | |
| 11. | 311-9316 | [1] | SEAL AS-BUFFER | |
| 12. | 311-9317 | [1] | SEAL-U-CUP | |
| 13. | 5P-7593 | [1] | SEAL-O-RING | |
| 14. | 491-0256 | [1] | ROD AS | |
| 14A. | 7J-3297 | [1] | BEARING | |
| 8T-9044 | [1] | RING-RETAINING | ||
| 15. | 491-0258 | [1] | PISTON | |
| 16. | 492-0309 | [1] | CYLINDER AS | |
| 16A. | 1U-2182 | [2] | BUSHING | |
| 17. | 311-9318 | [1] | SEAL-WIPER | |
| M | METRIC PART | |||
#SEBP58240532
492-0310: CYLINDER GP-TILT
492-0310 CYLINDER GP-TILT -BULLDOZER
S/N RJM1-UP
184.2-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576, 456-2173, 456-2174 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT ORDER @@@@@491-0252@@@@@
FIELD REPLACEMENT FOR @@@@@240-7347@@@@@
AN ATTACHMENT
S/N RJM1-UP
184.2-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576, 456-2173, 456-2174 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT ORDER @@@@@491-0252@@@@@
FIELD REPLACEMENT FOR @@@@@240-7347@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1J-2674 | [1] | RING-WEAR | |
| 2. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
| 4. | 5P-7593 | [1] | SEAL-O-RING | |
| 5. | 6E-1183 | [1] | PISTON | |
| 6. | 6V-3669 M | [8] | BOLT (M20X2.5X80-MM) | |
| 7. | 8C-5245 | [1] | RING-WEAR | |
| 8. | 8T-1790 | [1] | SEAL AS | |
| 9. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 10. | 8T-8381 | [1] | SEAL | |
| 11. | 158-3027 | [1] | RING-BACKUP | |
| 12. | 191-3583 | [1] | HEAD | |
| 311-9318 | [1] | SEAL-WIPER | ||
| 13. | 240-7349 | [1] | ROD AS | |
| 14. | 311-9316 | [1] | SEAL AS-BUFFER | |
| 15. | 311-9317 | [1] | SEAL-U-CUP | |
| 16. | 311-9318 | [1] | SEAL-WIPER | |
| 17. | 492-0309 | [1] | CYLINDER AS | |
| 17A. | 1U-2182 | [2] | BUSHING | |
| M | METRIC PART | |||
#SEBP58240533
6E-0397: CYLINDER GP-TILT
6E-0397 CYLINDER GP-TILT -ANGLING BULLDOZER
S/N RJM1-UP
184.15-MM (7.25-IN) BORE X 175-MM (6.9-IN) STROKE
PART OF 385-5581 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
S/N RJM1-UP
184.15-MM (7.25-IN) BORE X 175-MM (6.9-IN) STROKE
PART OF 385-5581 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-0398 | [1] | CYLINDER AS | |
| 1A. | 1U-2182 | [2] | BUSHING | |
| 2. | 2J-0564 | [1] | LOCKNUT (2-12-THD) | |
| 3. | 9T-5900 | [1] | WASHER (51.2X98X4.76-MM THK) | |
| 4. | 274-5527 | [1] | PISTON AS-CYLINDER | |
| 4A. | 5J-4993 | [1] | SEAL AS | |
| 4B. | 8H-3532 | [1] | SPRING-VALVE | |
| 4C. | 9T-4977 | [1] | PLUNGER | |
| 4D. | 132-5182 | [1] | INSERT | |
| 4E. | 132-5183 | [1] | PLUNGER | |
| 5. | 493-5233 | [1] | SEAL-O-RING | |
| 6. | 2K-2940 | [1] | RING-BACKUP | |
| 7. | 6E-0402 | [1] | HEAD | |
| 8. | 8C-3222 M | [4] | BOLT (M30X3.5X80-MM) | |
| 9. | 3S-7023 | [4] | WASHER (34X57X6-MM THK) | |
| 10. | 366-5815 | [1] | ROD AS | |
| 11. | 8T-0672 M | [4] | BOLT (M24X3X160-MM) | |
| 12. | 160-6309 | [1] | CAP-BEARING | |
| 13. | 8J-9180 B | [28] | SHIM (0.51-MM THK) | |
| 14. | 7X-0851 M | [4] | NUT (M24X3-THD) | |
| 15. | 1J-2674 | [1] | RING-WEAR | |
| 16. | 312-4247 | [1] | SEAL-WIPER | |
| 17. | 421-4025 | [1] | SEAL-U-CUP | |
| 18. | 312-4248 | [1] | SEAL AS-BUFFER | |
| 19. | 9T-0094 | [1] | RING-WEAR | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP58240534
422-2817: HEAD GP-PUMP
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-6953 | [2] | VALVE GP-RELIEF | |
| (EACH INCLUDES) | ||||
| 178-4171 | [1] | KIT-SEAL (STEERING PUMP RELIEF VALVE) | ||
| 123-7556 | [1] | CAP | ||
| 2. | 183-8409 Y | [1] | VALVE GP-RELIEF | |
| 3. | 6E-4392 Y | [1] | VALVE GP-PUMP CONTROL | |
| 4. | 183-8416 | [1] | BUSHING | |
| 5. | 3E-8008 M | [4] | BOLT-SOCKET HEAD (M16X2X90-MM) | |
| 6. | 119-7845 | [1] | SEAL-O-RING | |
| 7. | 144-9101 | [1] | PLUG-BREAK OFF | |
| 8. | 9T-3929 | [1] | PLUG AS | |
| 6E-5479 | [1] | SEAL | ||
| 9. | 161-6149 | [2] | SEAL-O-RING | |
| 10. | 3J-7354 | [2] | SEAL-O-RING | |
| 11. | 9S-8002 | [2] | PLUG (7/16-20-THD) | |
| 12. | 6E-4382 | [1] | BUSHING | |
| 13. | 6E-4383 | [1] | BUSHING | |
| 14. | 123-2017 | [1] | PLUG-BREAK OFF | |
| 323-6832 F | [1] | KIT-SEAL | ||
| (INCLUDES O-RINGS) | ||||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58240535
384-3774: HYDRAULIC AR
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6Y-3526 Y | [1] | ADAPTER GP-MOTOR | ||
| 389-1104 Y | [1] | CONTROL GP-HYDRAULIC (RIPPER) | ||
| 389-8233 Y | [1] | CYLINDER AR-LIFT | ||
| 389-8231 Y | [1] | LINES GP-BULLDOZER MANIFOLD | ||
| 392-2750 Y | [1] | LINES GP-PILOT | ||
| 389-8229 Y | [1] | LINES GP-PUMP | ||
| 389-8230 Y | [1] | LINES GP-STEERING | ||
| 159-7162 Y | [1] | MOTOR GP-PISTON | ||
| 9T-8346 Y | [1] | PUMP GP-PISTON (IMPLEMENT) | ||
| 421-1808 Y | [1] | PUMP GP-PISTON (STEERING) | ||
| 389-8232 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| S/N RJM1-899 | ||||
| 459-1853 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| S/N RJM900-UP | ||||
| 9T-8704 Y | [1] | VALVE GP-PRESSURE CONTROL (STEERING) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58240536
389-1102: HYDRAULIC AR
389-1102 HYDRAULIC AR -SINGLE TILT
S/N RJM1-UP
PART OF 390-3409, 390-3410, 390-3411, 390-3412, 509-2247, 515-8239, 515-8240, 515-8241, 515-8242, 515-8243, 526-4862 DISTRIBUTION AR
AN ATTACHMENT
S/N RJM1-UP
PART OF 390-3409, 390-3410, 390-3411, 390-3412, 509-2247, 515-8239, 515-8240, 515-8241, 515-8242, 515-8243, 526-4862 DISTRIBUTION AR
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58240537
383-8223: LEVER GP-CONTROL VALVE
383-8223 LEVER GP-CONTROL VALVE -BULLDOZER, DUAL TILT
S/N RJM1-UP
PART OF 389-1103 CONTROL AR-HYDRAULIC
AN ATTACHMENT
S/N RJM1-UP
PART OF 389-1103 CONTROL AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-8680 Y | [1] | SWITCH GP-HANDLE (DUAL TILT) | |
| 2. | 197-5109 | [1] | FILM (INSTRUCTION) | |
| 3. | 200-0188 Y | [1] | VALVE GP-PILOT (BULLDOZER, DUAL TILT) | |
| 4. | 390-0702 | [1] | PLATE AS | |
| 5. | 390-8543 | [1] | GASKET | |
| 6. | 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | |
| 7. | 8C-8514 | [2] | SCREW-MACHINE (8-32X0.375-IN) | |
| 8. | 9X-2041 M | [4] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 9. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 10. | 3Y-6047 | [1] | PLUG-BUTTON | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58240538
394-1256: LEVER GP-CONTROL VALVE
394-1256 LEVER GP-CONTROL VALVE -RIPPER
S/N RJM1-UP
PART OF 389-1104 CONTROL GP-HYDRAULIC
S/N RJM1-UP
PART OF 389-1104 CONTROL GP-HYDRAULIC
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58240539
389-8231: LINES GP-BULLDOZER MANIFOLD
389-8231 LINES GP-BULLDOZER MANIFOLD
S/N RJM1-377
PART OF 384-3774 HYDRAULIC AR
S/N RJM1-377
PART OF 384-3774 HYDRAULIC AR
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-8434 | [1] | GUARD | |
| 2. | 109-6942 Y | [1] | VALVE GP-QUICK-DROP (BULLDOZER) | |
| 3. | 440-9533 I | [1] | HOSE AS | |
| 4. | 440-9534 | [1] | HOSE AS | |
| 5. | 440-9537 | [1] | BRACKET AS | |
| 6. | 136-1122 | [2] | BUSHING | |
| 7. | 346-6393 | [1] | GROMMET | |
| 8. | 4J-0520 | [4] | SEAL-O-RING | |
| 9. | 4L-9337 | [3] | BOLT (3/8-16X1.5-IN) | |
| 10. | 5P-8167 | [3] | BOLT (3/8-16X0.625-IN) | |
| 11. | 7G-3413 | [1] | CLIP (SLOT) | |
| 12. | 7G-3414 | [1] | CLIP (TAB) | |
| 13. | 7G-5984 | [4] | CLIP (TAB) | |
| 14. | 7G-5985 | [4] | CLIP (SLOT) | |
| 15. | 7G-5986 | [4] | GROMMET | |
| 16. | 7X-0584 | [2] | WASHER-HARD (13.5X20.5X2-MM THK) | |
| 17. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 18. | 8C-4436 | [2] | BOLT (1/2-13X1.375-IN) | |
| 19. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 20. | 8T-4184 M | [2] | BOLT (M12X1.75X45-MM) | |
| 21. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 22. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 24. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
