OPERATOR STATION
SEAT GPTACHOMETER GP
CAB GP
WASHER GP-WINDOW
OPERATOR STATION
SEAT GP
#SEBP59010660
273-6037: SEAT GP-SUSPENSION
273-6037 SEAT GP-SUSPENSION -DELUXE, CLOTH
S/N DAN1-UP
PART OF 206-1796 SEAT GP-SUSPENSION
AN ATTACHMENT
S/N DAN1-UP
PART OF 206-1796 SEAT GP-SUSPENSION
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-7819 C | [1] | RING-RETAINING | |
| 2. | 4B-4278 C | [4] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 105-3481 M | [2] | BOLT-SOCKET HEAD (M8X1.25X20-MM) | |
| 4. | 111-5042 C | [3] | FASTENER | |
| 5. | 121-3040 C | [6] | FASTENER-PANEL | |
| 6. | 161-9283 | [1] | WASHER (19.8X31.8X1.6-MM THK) | |
| 7. | 164-1245 C | [1] | CUSHION GP-SEAT | |
| 101-0003 | [3] | FASTENER | ||
| 164-1269 | [1] | BOOT | ||
| 164-1272 | [1] | ROD AS | ||
| 164-1273 | [2] | SPRING-EXTENSION | ||
| 8. | 164-1246 C | [1] | CUSHION AS (BACK) | |
| 9. | 164-1249 | [1] | LEVER AS | |
| 10. | 164-1251 | [1] | SPRING | |
| 11. | 164-1252 | [1] | SPRING | |
| 12. | 2P-7864 C | [2] | SCREW-TAPPING (1/4-14-THD) | |
| 13. | 4H-1641 C | [2] | PIN-SPRING | |
| 14. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 164-1258 | [1] | BRACKET AS (RH) | |
| 16. | 164-1259 | [1] | BRACKET AS (LH) | |
| 17. | 164-1263 | [1] | PAN AS | |
| 18. | 164-1269 C | [1] | BOOT | |
| 19. | 164-1271 C | [2] | SPRING | |
| 20. | 164-1272 C | [1] | ROD AS | |
| 21. | 164-1273 C | [2] | SPRING-EXTENSION | |
| 22. | 164-1274 C | [2] | BLOCK | |
| 23. | 164-1275 | [1] | BACKREST AS | |
| 2W-9499 M | [2] | BOLT (M6X1X40-MM) | ||
| 8C-0572 | [2] | WASHER (8.8X25.5X2-MM THK) | ||
| 24. | 164-1276 C | [2] | TUBE | |
| 25. | 164-1277 C | [2] | CLIP-SPRING | |
| 26. | 180-5781 | [1] | ROD | |
| 27. | 180-5782 C | [1] | SPRING | |
| 28. | 180-5783 C | [1] | FOLLOWER | |
| 29. | 180-5784 C | [1] | LATCH AS | |
| 30. | 180-5785 C | [1] | SPRING | |
| 31. | 129-3180 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 32. | 180-5787 C | [1] | KNOB | |
| 33. | 180-5788 C | [1] | BLOCK | |
| 34. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 35. | 180-5791 | [1] | SUPPORT AS-SEAT (LUMBAR) | |
| 36. | 195-9223 C | [4] | SCREW-PAN HEAD (10-14X0.63-IN) | |
| 37. | 260-0027 | [1] | KNOB-SLIDE | |
| 38. | 260-0028 | [1] | LEVER-TILT | |
| 39. | 260-0045 | [1] | BOLT-SPECIAL | |
| 40. | 8T-7566 C | [1] | PIN-SPRING | |
| 41. | 9X-6620 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 42. | 3T-0852 M | [8] | LOCKNUT (M8X1.25-THD) | |
| PARTS SHOWN IN GRAPHIC WITHOUT REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP59010661
280-7364: SEAT GP-SUSPENSION
280-7364 SEAT GP-SUSPENSION -VINYL
S/N DAN1-UP
PART OF 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DAN1-UP
PART OF 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59010662
280-7365: SEAT GP-SUSPENSION
280-7365 SEAT GP-SUSPENSION -CLOTH
S/N DAN1-UP
PART OF 294-4946 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N DAN1-UP
PART OF 294-4946 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59010663
280-7366: SEAT GP-SUSPENSION
280-7366 SEAT GP-SUSPENSION -DELUXE, CLOTH
S/N DAN1-UP
PART OF 294-4947, 294-4948 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N DAN1-UP
PART OF 294-4947, 294-4948 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59010664
273-6372: SUSPENSION GP-SEAT
273-6372 SUSPENSION GP-SEAT -AIR
S/N DAN1-UP
PART OF 206-1791, 206-1792, 206-1796 SEAT GP-SUSPENSION
Type 1
AN ATTACHMENT
S/N DAN1-UP
PART OF 206-1791, 206-1792, 206-1796 SEAT GP-SUSPENSION
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 397-6409 Y | [1] | AIR COMPRESSOR GP-SEAT (SUSPENSION SEAT) | ||
| 164-1215 | [1] | ABSORBER AS-SHOCK (SEAT) | ||
| 164-1218 | [2] | ARM AS-SUSPENSION (OUTER) | ||
| 260-0060 | [1] | ARM AS-SUSPENSION (INNER) | ||
| 4B-9784 | [8] | BALL | ||
| 260-0063 | [1] | BASE-SEAT | ||
| 164-1230 | [12] | BEARING | ||
| 260-0067 | [2] | BEARING | ||
| [1] | BEARING-FLANGED | |||
| 161-9289 | [2] | BLOCK-SLIDER | ||
| 260-0043 | [1] | BLOCK-STOP | ||
| 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | ||
| 1H-3337 | [4] | BOLT (1/4-20X0.875-IN) | ||
| 4M-0061 | [2] | BOLT (5/16-18X0.75-IN) | ||
| 7X-0481 | [1] | BOLT (1/2-13X8-IN) | ||
| 260-0041 | [1] | BOLT (3/4-10X1.42-IN) | ||
| 197-6657 M | [1] | BOLT-CARRIAGE (M12X1.75X80-MM) | ||
| 164-1240 | [1] | BOOT | ||
| 237-3943 | [1] | BRACKET | ||
| 164-1219 | [1] | BRACKET AS (FRONT) | ||
| 164-1220 | [1] | BRACKET AS (REAR) | ||
| 164-1229 | [4] | BUMPER | ||
| 164-1237 | [1] | BUSHING | ||
| 111-5042 | [34] | FASTENER | ||
| 260-0036 | [1] | HARNESS AS-RIDE CONTROL | ||
| 260-0046 | [1] | HOUSING-UPPER | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 149-4745 | [2] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | ||
| (EACH INCLUDES BOLT & BLOCK-SLIDER) | ||||
| 260-0057 | [1] | LATCH AS-SLIDE | ||
| 260-0031 | [1] | LEVER | ||
| 260-0032 | [1] | LEVER | ||
| 1K-6872 | [1] | LOCKNUT (1/2-13-THD) | ||
| 2D-6235 | [4] | LOCKNUT (1/4-20-THD) | ||
| 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | ||
| 6V-7687 M | [1] | LOCKNUT (M12X1.75-THD) | ||
| 096-4882 M | [2] | LOCKNUT (M8X1.25-THD) | ||
| 142-2928 | [4] | LOCKNUT (4-40-THD) | ||
| 3B-4505 | [2] | LOCKWASHER | ||
| 3J-4818 | [2] | LOCKWASHER | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 2L-5893 | [1] | PIN-SPRING | ||
| 4H-8380 | [4] | PIN-SPRING | ||
| 164-1232 | [1] | PLATE | ||
| 260-0052 | [1] | PLATE AS-SLIDE | ||
| 260-0051 | [1] | PLATE AS-UPPER | ||
| 260-0044 | [1] | PLATE-LATCH | ||
| 5V-1497 | [2] | RETAINER | ||
| 215-1242 | [1] | RING | ||
| 8S-7803 | [3] | RING-RETAINING | ||
| 130-8343 M | [1] | SCREW-BUTTON HEAD (3/8-16X0.625-IN) | ||
| 6L-7155 | [2] | SCREW-MACHINE (1/4-20X0.5-IN) | ||
| 173-5787 | [2] | SETSCREW (1/4-20-THD) | ||
| 164-1226 | [2] | SHAFT | ||
| 260-0047 | [2] | SHAFT-UPPER | ||
| 260-0049 | [2] | SHAFT-LOWER | ||
| 161-9288 | [1] | SHAFT-PIVOT | ||
| 260-0030 | [1] | SHAFT-PIVOT | ||
| 164-1233 | [2] | SPACER (13X25.4X20.5-MM THK) | ||
| 164-1238 | [1] | SPACER (12.8X22.2X3.1-MM THK) | ||
| 164-1239 | [2] | SPACER (13.5X19X61.9-MM THK) | ||
| 163-1135 | [1] | SPRING | ||
| 260-0034 | [1] | SPRING-RETURN | ||
| 260-0035 | [1] | SPRING-RETURN | ||
| 260-0033 | [1] | SPRING-TORSION | ||
| 218-0235 | [2] | SWITCH AS-LIMIT (SUSPENSION SEAT) | ||
| (EACH INCLUDES) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7X-0622 | [6] | WASHER (13X24X2.5-MM THK) | ||
| 9X-1481 | [2] | WASHER (13X25.4X1.6-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59010665
273-6372: SUSPENSION GP-SEAT
273-6372 SUSPENSION GP-SEAT -AIR
S/N DAN1-UP
PART OF 206-1791, 206-1792, 206-1796 SEAT GP-SUSPENSION
Type 2
AN ATTACHMENT
S/N DAN1-UP
PART OF 206-1791, 206-1792, 206-1796 SEAT GP-SUSPENSION
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [2] | STRAP-CABLE | |
| 2. | 111-5042 | [34] | FASTENER | |
| 3. | 243-3593 | [1] | SPRING AS-AIR | |
| 130-8343 M | [1] | SCREW-BUTTON HEAD (3/8-16X0.625-IN) | ||
| 163-1135 | [1] | SPRING | ||
| 164-1232 | [1] | PLATE | ||
| 5P-6010 D | TUBE (1-M) | |||
| 4. | 149-4745 | [2] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | |
| (EACH INCLUDES BOLT & BLOCKS) | ||||
| 5. | 161-9283 C | [1] | WASHER (19.8X31.8X1.6-MM THK) | |
| 6. | 161-9285 C | [1] | NUT (3/4-10-THD) | |
| 7. | 161-9288 | [1] | SHAFT-PIVOT | |
| 8. | 161-9289 | [2] | BLOCK-SLIDER | |
| 9. | 180-5789 | [2] | NUT | |
| 10. | 164-1215 | [1] | ABSORBER AS-SHOCK (SEAT) | |
| 11. | 164-1218 | [2] | ARM AS-SUSPENSION (OUTER) | |
| 12. | 164-1219 | [1] | BRACKET AS (FRONT) | |
| 13. | 164-1220 | [1] | BRACKET AS (REAR) | |
| 14. | 164-1226 | [2] | SHAFT | |
| 15. | 164-1228 C | [1] | HARNESS AS-RIDE CONTROL | |
| 16. | 164-1229 | [4] | BUMPER | |
| 17. | 164-1230 | [12] | BEARING | |
| 19. | 164-1233 | [2] | SPACER (13X25.4X20.5-MM THK) | |
| 20. | 164-1234 C | [1] | PLATE | |
| 21. | 164-1235 C | [1] | KNOB | |
| 22. | 164-1237 | [1] | BUSHING | |
| 23. | 164-1238 | [1] | SPACER (12.8X22.2X3.1-MM THK) | |
| 24. | 164-1239 | [2] | SPACER (13.5X19X61.9-MM THK) | |
| 25. | 164-1240 | [1] | BOOT | |
| 26. | 173-5787 | [2] | SETSCREW (1/4-20-THD) | |
| 28. | 186-5107 C | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 29. | 197-6657 M | [1] | BOLT-CARRIAGE (M12X1.75X80-MM) | |
| 30. | 215-8196 C | [1] | VALVE AS | |
| 31. | 372-2158 | [1] | BRACKET-MOUNTING | |
| 32. | 260-0030 | [1] | SHAFT-PIVOT | |
| 33. | 321-6337 | [1] | LEVER (SWIVEL) | |
| 34. | 260-0032 | [1] | LEVER (SLIDE) | |
| 35. | 260-0033 | [1] | SPRING-TORSION | |
| 36. | 260-0034 | [1] | SPRING-RETURN (SWIVEL) | |
| 37. | 260-0035 | [1] | SPRING-RETURN (SLIDE) | |
| 38. | 260-0041 | [1] | BOLT (3/4-10X1.42-IN) | |
| 40. | 260-0043 | [1] | BLOCK-STOP | |
| 41. | 260-0044 | [1] | PLATE-LATCH | |
| 42. | 317-5309 | [1] | HOUSING AS | |
| 260-0046 | [1] | HOUSING-UPPER | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 43. | 260-0047 | [2] | SHAFT-UPPER | |
| 44. | 260-0049 | [2] | SHAFT-LOWER | |
| 45. | 260-0051 | [1] | PLATE AS-UPPER | |
| 46. | 260-0052 | [1] | PLATE AS-SLIDE | |
| 47. | 260-0057 | [1] | LATCH AS-SLIDE | |
| 48. | 397-6409 Y | [1] | AIR COMPRESSOR GP-SEAT (SUSPENSION SEAT) | |
| 50. | 260-0063 | [1] | BASE-SEAT | |
| 51. | 260-0067 | [2] | BEARING | |
| 52. | 289-1204 C | [1] | RING | |
| 53. | 096-4882 M | [2] | LOCKNUT (M8X1.25-THD) | |
| 54. | 129-3180 CM | [1] | LOCKNUT (M12X1.75-THD) | |
| 55. | 153-0088 C | [4] | WASHER-HARD (10.31X20X1.65-MM THK) | |
| 56. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 57. | 1H-3337 | [4] | BOLT (1/4-20X0.875-IN) | |
| 58. | 1K-6872 | [1] | LOCKNUT (1/2-13-THD) | |
| 59. | 2D-6235 | [4] | LOCKNUT (1/4-20-THD) | |
| 60. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 61. | 2L-5893 | [1] | PIN-SPRING | |
| 62. | 3B-4505 | [2] | LOCKWASHER | |
| 63. | 3B-4631 C | [1] | PIN-COTTER | |
| 64. | 3J-4818 | [2] | LOCKWASHER | |
| 65. | 4B-9784 C | [12] | BALL | |
| 66. | 9L-7469 | [4] | LOCK PIN | |
| 67. | 4M-0061 | [2] | BOLT (5/16-18X0.75-IN) | |
| 68. | 6L-7155 | [2] | SCREW-MACHINE (1/4-20X0.5-IN) | |
| 69. | 6V-8185 | [4] | NUT (1/4-20-THD) | |
| 70. | 7X-0481 | [1] | BOLT (1/2-13X8-IN) | |
| 71. | 7X-0622 | [6] | WASHER (13X24X2.5-MM THK) | |
| 72. | 8S-7803 | [3] | RING-RETAINING | |
| 73. | 9X-1481 | [2] | WASHER (13X25.4X1.6-MM THK) | |
| 74. | 8Y-5946 | [1] | FASTENER | |
| 75. | 260-0060 | [1] | ARM AS-SUSPENSION (INNER) | |
| 76. | 383-6201 | [1] | HARNESS AS-CAB | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59010666
239-1080: TACHOMETER GP-ELECTRIC
239-1080 TACHOMETER GP-ELECTRIC
S/N DAN1-496
PART OF 290-6735 WIRING GP-CONSOLE
AN ATTACHMENT
S/N DAN1-496
PART OF 290-6735 WIRING GP-CONSOLE
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59010667
206-1704: TRIM GP-CAB
206-1704 TRIM GP-CAB -OPEN ROPS
S/N DAN1-UP
PART OF 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DAN1-UP
PART OF 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-7524 E | SEAL (40-CM EACH) | ||
| 2. | 9C-4457 | [4] | FASTENER | |
| 3. | 141-1762 | [1] | SPACER (21.2X25.4X20-MM THK) | |
| 4. | 206-1623 | [1] | INSERT (LH) | |
| 5. | 206-1625 | [1] | INSERT (RH) | |
| 6. | 206-1637 | [1] | CONSOLE-STORAGE | |
| 7. | 206-1665 | [2] | PLUG | |
| 8. | 206-1666 | [1] | PLUG | |
| 9. | 206-1683 | [1] | INSERT | |
| 10. | 206-1798 | [1] | COVER-POST | |
| 11. | 206-1799 | [4] | PLUG | |
| 12. | 213-1888 | [1] | COVER-FENDER | |
| 13. | 261-9632 | [1] | COVER AS | |
| 206-1684 | [1] | COVER (CAB FILTER) | ||
| 14. | 282-7833 | [1] | GROMMET | |
| 15. | 282-7835 | [1] | PLATE | |
| 16. | 6V-7744 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 17. | 8T-4222 | [1] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 18. | 8T-4178 M | [1] | BOLT (M10X1.5X90-MM) | |
| 19. | 8C-3798 M | [2] | BOLT-LOCKING (M6X1X30-MM) | |
| 20. | 9X-2038 | [2] | WASHER (7X19X2-MM THK) | |
| 21. | 9X-2044 M | [6] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 22. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 23. | 6V-0292 B | [1] | PLUG | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59010668
206-1857: VISOR GP-CAB
206-1857 VISOR GP-CAB
S/N DAN1-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N DAN1-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59010669
206-1727: WASHER GP-WINDOW
206-1727 WASHER GP-WINDOW
S/N DAN1-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS
Type 1
AN ATTACHMENT
S/N DAN1-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 282-7835 | [1] | PLATE | |
| 3. | 3S-2093 | [11] | STRAP-CABLE | |
| 4. | 8T-1118 | [1] | NOZZLE AS-WASHER | |
| 5. | 9R-3469 | [2] | DIAPHRAGM | |
| 6. | 9X-8372 | [1] | FILM-INSTRUCTION (WASHER FILL) | |
| 7. | 416-0004 | [1] | CONNECTOR | |
| 8. | 213-6051 | [1] | HARNESS AS-CAB (WINDOW WASHER) | |
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 180-9340 | [15] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [15] | STRAP-CABLE (WHITE) | ||
| 097-7234 | [2] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M) | |||
| 9. | 214-3763 | [1] | TANK GP-WINDOW WASHER | |
| 254-5683 | [1] | CAP | ||
| 8E-8293 | [2] | GROMMET | ||
| 6T-1375 | [2] | PUMP AS-WASHER | ||
| 214-3742 | [1] | TANK-WASHER | ||
| 10. | 276-8791 | [1] | CLIP | |
| 11. | 283-3451 | [2] | CONNECTOR AS | |
| 12. | 156-0283 | [2] | WASHER-HARD (8.4X35X2.5-MM THK) | |
| 13. | 8T-5093 M | [2] | BOLT-LOCKING (M8X1.25X25-MM) | |
| 14. | 144-0195 E | HOSE (17-CM) | ||
| 14A. | 144-0195 E | HOSE (21-CM EACH) | ||
| 14B. | 144-0195 E | HOSE (72-CM) | ||
| 15. | 8C-3798 M | [2] | BOLT-LOCKING (M6X1X30-MM) | |
| 16. | 282-7833 | [1] | GROMMET | |
| 17. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
