AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

324-7006 LINER GP-CAB S/N L4F1-UP PART OF 330-4004 CAB AR 740B EJECTOR TRUCK


OPERATOR STATION
CAB GP
AIR CONDITIONER GP
HEATER GP
MIRROR GP
WIPER GP-WINDOW

EJECTOR TRUCK 740B EJECTOR TRUCK L4F
 740B Ejector Articulated Truck L4F00001-UP (MACHINE) POWERED BY C15 Engine SEBP5911 740B L4F   (2011)

OPERATOR STATION

CAB GP
330-4004 CAB AR
CYLINDER GP-CAB TILT
341-7067 CYLINDER GP-CAB TILT
LINER GP-CAB
324-7006 LINER GP-CAB
LINER GP-CAB
324-7023 LINER GP-CAB
MOUNTING GP-CAB PANEL
458-9335 MOUNTING GP-CAB PANEL
373-3680 MOUNTING GP-RADIO
PANEL GP-CAB
354-0728 PANEL GP-CAB
PANEL GP-CAB
451-7330 PANEL GP-CAB
PANEL GP-CAB
458-7298 PANEL GP-CAB
TILT GP-PLATFORM
335-3941 TILT GP-PLATFORM
 

#SEBP59110670
 

324-7006: LINER GP-CAB

324-7006 LINER GP-CAB
S/N L4F1-UP
PART OF 330-4004 CAB AR
i04171144 SEBP5911
3247006 LINER GP-CAB Parts scheme 3247006 LINER GP-CAB Parts scheme
  For full view, you need register

Parts for your 740B EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8928 [1] HOOK-COAT  
2. 8C-0618 [1] ASHTRAY AS  
3. 126-2373 [2] HANDLE AS-PULL  
4. 154-7468 [1] COVER AS  
5. 154-7470 [1] COVER  
6. 155-9708 [1] COVER AS  
7. 155-9709 [1] COVER (BOTTOM)  
8. 160-8686 [1] CHANNEL-REAR  
9. 160-8718 [1] PANEL AS-DOOR  
10. 160-8723 [1] TRIM AS  
  114-9125 [1] HOLDER-CUP  
11. 160-8728 [1] TRIM  
12. 164-8473 [3] LOUVER AS  
13. 170-6019 [1] STORAGE AS  
14. 171-4047 [5] LOUVER AS-VENT  
15. 224-2669 [4] PLUG-PLASTIC  
16. 228-7260 [1] DOOR AS  
  3H-0240 [11] WASHER (5X9.7X0.8-MM THK)  
  9M-5733 [11] RIVET-POP  
  165-0399 [1] HINGE AS  
  302-4764 [1] LATCH AS  
17. 289-8726 [1] PLATE AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  247-5834 [1] PLATE  
18. 322-7873 [1] LINER AS-CAB  
  9X-1046 M [8] SCREW (M4X0.7X18-MM)  
  124-6047 [2] COVER-SPEAKER  
19. 442-9429 [1] COVER-POST  
20. 340-7386 [1] COVER AS  
  240-2169 [1] RETAINER  
21. 340-7387 [1] COVER AS  
22. 340-7388 [1] DASH AS  
23. 442-9427 [1] COVER-REAR WIPER  
24. 344-2597 [2] GASKET  
25. 442-9430 [1] COVER (REAR LH)  
26. 349-5798 [1] GASKET  
27. 354-0742 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
28. 114-6658 [60] WASHER (6.5X17X1-MM THK)  
29. 7X-0579 [12] WASHER-HARD (8.8X25.5X2-MM THK)  
30. 104-2091 [22] SCREW-FLAT HEAD (6-20X0.5-IN)  
31. 118-5619 [2] SCREW-FLAT HEAD (6-20X1-IN)  
32. 3E-4313 M [10] SCREW-BUTTON HEAD (M4X0.7X8-MM)  
33. 6V-0292 [1] PLUG  
34. 8T-0267 M [2] BOLT-SOCKET HEAD (M6X1X12-MM)  
35. 8T-0269 M [2] BOLT-SOCKET HEAD (M6X1X20-MM)  
36. 9X-2042 M [31] SCREW-TRUSS HEAD (M6X1X12-MM)  
37. 9X-2044 M [28] SCREW-TRUSS HEAD (M6X1X16-MM)  
38. 9X-2045 M [14] SCREW-TRUSS HEAD (M6X1X20-MM)  
39. 148-7361 E FASTENER-HOOK & LOOP (ADHESIVE BACKED)(8-CM)  
40. 148-7362 E FASTENER-HOOK & LOOP (ADHESIVE BACKED)(5-CM EACH)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59110671
 

324-7023: LINER GP-CAB

324-7023 LINER GP-CAB -SOUND SUPPRESSION
S/N L4F1-UP
PART OF 330-4004 CAB AR
i04171150 SEBP5911
3247023 LINER GP-CAB Parts scheme
  For full view, you need register

Parts for your 740B EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-2216 [59] CAP (PUSH ON)  
2. 160-8721 [1] TRIM  
3. 168-0378 [1] INSULATION  
4. 189-6524 [2] PLUG  
5. 198-6081 [1] INSULATION  
6. 198-7409 [4] PLUG  
7. 237-6176 [1] FLOOR MAT  
8. 322-7888 [1] INSULATION  
9. 322-7889 [1] INSULATION  
10. 358-8801 [1] INSULATION  
11. 343-6137 [1] TRIM  
12. 379-9736 [1] FLOOR MAT  
13. 344-2594 [1] INSULATION  
14. 358-8795 [1] INSULATION  
15. 358-8796 [1] INSULATION  
16. 358-8797 [1] INSULATION  
17. 358-8798 [1] INSULATION  
18. 358-8799 [1] INSULATION  
19. 358-8800 [1] INSULATION  
 

#SEBP59110672
 

324-7022: LINES GP-AIR CONDITIONER

324-7022 LINES GP-AIR CONDITIONER
S/N L4F1-530
PART OF 330-4004 CAB AR
i04171149 SEBP5911
3247022 LINES GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 740B EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-7742 [1] GROMMET  
2. 308-2583 [1] ACCUMULATOR-REFRIGERANT  
3. 320-0563 [1] DRYER AS-REFRIGERANT (INLINE)  
  189-1707 [1] ORIFICE AS-AIR CONDITIONER  
  325-4416 M [2] STUD (M8X1.25X52-MM)  
4. 327-0282 [1] SEAL-INTEGRAL (1/2-IN)  
5. 327-0283 [1] SEAL-INTEGRAL (3/4-IN)  
6. 340-1441 [1] HOSE AS  
7. 348-5748 [1] HOSE AS  
8. 109-1633 [1] CLIP (SLOT)  
9. 109-1634 [1] CLIP (TAB)  
10. 178-3336 M [4] NUT-HEX FLANGE (M8X1.25-THD)  
11. 7X-7910 [1] CLIP (SLOT)  
12. 7X-7911 [1] CLIP (TAB)  
13. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
15. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP59110673
 

324-7022: LINES GP-AIR CONDITIONER

324-7022 LINES GP-AIR CONDITIONER
S/N L4F531-UP
PART OF 330-4004 CAB AR
i06992809 SEBP5911
3247022 LINES GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 740B EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-7742 [1] GROMMET  
2. 513-7188 C [1] ACCUMULATOR AS  
3. 320-0563 [1] DRYER AS-REFRIGERANT (INLINE)  
  189-1707 [1] ORIFICE AS-AIR CONDITIONER  
  325-4416 M [2] STUD (M8X1.25X52-MM)  
4. 327-0282 [1] SEAL-INTEGRAL (1/2-IN)  
5. 327-0283 [1] SEAL-INTEGRAL (3/4-IN)  
6. 340-1441 [1] HOSE AS  
7. 348-5748 [1] HOSE AS  
8. 109-1633 [1] CLIP (SLOT)  
9. 109-1634 [1] CLIP (TAB)  
10. 178-3336 M [4] NUT-HEX FLANGE (M8X1.25-THD)  
11. 7X-7910 [1] CLIP (SLOT)  
12. 7X-7911 [1] CLIP (TAB)  
13. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
15. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP59110674
 

332-3065: LINES GP-AIR CONDITIONER

332-3065 LINES GP-AIR CONDITIONER
S/N L4F1-UP
PART OF 291-8753 POWER TRAIN AR
i04171481 SEBP5911
3323065 LINES GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 740B EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-2723 E GUARD-HOSE (70-CM)  
1A. 206-2723 E GUARD-HOSE (25-CM)  
2. 6U-2703 [1] BRACKET-ANGLE  
3. 178-3336 M [6] NUT-HEX FLANGE (M8X1.25-THD)  
4. 193-2120 [2] GROMMET  
5. 200-6345 [1] SADDLE-MOUNTING (DUAL SWIVEL)  
6. 204-2281 [2] STRAP-CABLE  
7. 352-7829 [1] BRACKET  
8. 357-7470 [1] HOSE AS  
9. 357-7471 [1] HOSE AS  
    (EACH HOSE AS INCLUDES)
  327-0282 [2] SEAL-INTEGRAL (1/2-IN)  
10. 357-7472 [1] HOSE AS  
  327-0283 [2] SEAL-INTEGRAL (3/4-IN)  
11. 357-9876 [3] BRACKET AS  
12. 329-1681 [2] CLIP  
13. 3U-2752 [3] CLIP (LOOP)  
14. 3U-2754 [9] CLIP  
15. 3U-2755 [8] CLIP  
16. 6V-1867 [2] CLIP (SLOT)  
17. 6V-1868 [2] CLIP (TAB)  
18. 6V-5039 [1] CLIP (SLOT)  
19. 6V-5040 [1] CLIP (TAB)  
20. 7S-8920 [5] CLIP (SLOT)  
21. 7S-8921 [5] CLIP (TAB)  
22. 8T-4121 [25] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4133 M [11] NUT (M10X1.5-THD)  
24. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
25. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
26. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
27. 8T-4195 M [10] BOLT (M10X1.5X30-MM)  
28. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
29. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4244 M [1] NUT (M12X1.75-THD)  
32. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
33. 206-2722 E GUARD-HOSE (18-CM)  
33A. 206-2722 E GUARD-HOSE (10-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59110675
 

291-8930: LINES GP-HEATER

291-8930 LINES GP-HEATER
S/N L4F1-UP
PART OF 291-8753 POWER TRAIN AR
Type 1
i04169622 SEBP5911
2918930 LINES GP-HEATER Parts scheme
  For full view, you need register

Parts for your 740B EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-1908 [1] FITTING-BULKHEAD  
3. 3U-2428 [6] CLAMP-PIPE  
4. 6U-0455 [7] STRAP  
5. 6U-0456 [1] STRAP  
6. 6U-2703 [1] BRACKET-ANGLE  
7. 7D-7026 [3] CONNECTOR-HOSE  
8. 8T-0154 [6] CLAMP-HOSE  
9. 9N-1595 [2] NUT (3/8-18-THD)  
10. 005-7889 [1] VALVE AS-DRAIN (HEATER)  
11. 290-5562 [2] MOUNT (DUAL SWIVEL)  
12. 3D-2824 [2] SEAL-O-RING  
13. 6V-8801 [1] NUT (3/8-16-THD)  
14. 7S-8920 [1] CLIP (SLOT)  
15. 7S-8921 [1] CLIP (TAB)  
16. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4133 M [2] NUT (M10X1.5-THD)  
18. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
19. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
20. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 9M-5501 [3] ELBOW-STREET  
22. 4U-7962 D HOSE-HEATER (2.9-M)  
22A. 4U-7962 D HOSE-HEATER (2.6-M)  
22B. 4U-7962 D HOSE-HEATER (0.6-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP59110676
 

291-8930: LINES GP-HEATER

291-8930 LINES GP-HEATER
S/N L4F1-UP
PART OF 291-8753 POWER TRAIN AR
Type 2
i05656205 SEBP5911
2918930 LINES GP-HEATER Parts scheme
  For full view, you need register

Parts for your 740B EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6U-0455 C [7] STRAP  
2. 6U-0456 [1] STRAP  
3. 6U-2703 [1] BRACKET-ANGLE  
4. 8T-0154 C [4] CLAMP-HOSE  
5. 9N-1595 C [1] NUT (3/8-18-THD)  
6. 005-7889 [1] VALVE AS-DRAIN (HEATER)  
7. 290-5562 [2] MOUNT (DUAL SWIVEL)  
8. 148-8307 C [1] ADAPTER AS  
  3J-1907 [1] SEAL-O-RING  
  5P-8874 [1] ADAPTER  
9. 194-7631 C [1] ELBOW  
10. 260-9144 C [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  168-8806 [1] CONNECTOR  
11. 3D-2824 C [1] SEAL-O-RING  
12. 3K-0360 C [1] SEAL-O-RING  
13. 3U-2428 C [4] CLAMP-PIPE  
14. 8T-4121 C [3] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 CM [1] NUT (M10X1.5-THD)  
16. 8T-4136 CM [2] BOLT (M10X1.5X25-MM)  
17. 415-6334 CE HOSE (252-CM)  
17A. 415-6334 CE HOSE (287-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59110677
 

326-8727: MIRROR GP-REAR VIEW

326-8727 MIRROR GP-REAR VIEW
S/N L4F1-UP
PART OF 291-8819 INSTALLATION AR-MACHINE
i03994514 SEBP5911
3268727 MIRROR GP-REAR VIEW Parts scheme
  For full view, you need register

Parts for your 740B EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-8926 [24] WASHER (18.3X40X3.15-MM THK)  
2. 108-7638 [6] SPACER (13.3X17.3X17.4-MM THK)  
3. 220-4050 C [3] MIRROR (EXTERIOR, REAR)  
4. 305-8488 [1] BRACKET-MIRROR (LH)  
5. 305-8490 [1] BRACKET-MIRROR (RH)  
6. 326-8732 [1] BRACKET-MIRROR  
7. 348-5709 C [2] MIRROR AS  
8. 8T-4194 M [6] BOLT (M12X1.75X50-MM)  
9. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 8T-4244 M [6] NUT (M12X1.75-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP59110678
 

354-8656: MIRROR GP-REAR VIEW

354-8656 MIRROR GP-REAR VIEW -ELECTRIC, HEATED
S/N L4F1-UP
AN ATTACHMENT
i04081554 SEBP5911
3548656 MIRROR GP-REAR VIEW Parts scheme
  For full view, you need register

Parts for your 740B EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [13] STRAP-CABLE  
2. 271-2824 [1] SWITCH AS-ROCKER (HEATED MIRROR)  
3. 301-8353 Y [1] HARNESS AS-WIRING (MIRROR, RH)(POWER, HEATED)  
4. 301-8354 Y [1] HARNESS AS-WIRING (MIRROR, LH)(POWER, HEATED)  
5. 327-7732 [1] MIRROR AS-CONVEX  
  326-8729 [1] COVER AS-REAR  
6. 337-6640 [1] SWITCH AS-POSITION (MIRROR)(MIRROR, RH)  
6A. 337-6640 [1] SWITCH AS-POSITION (MIRROR)(MIRROR, LH)  
    (EACH SWITCH AS INCLUDES)
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
  231-2300 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
7. 373-1754 [1] MIRROR-REAR VIEW  
8. 353-3585 [1] MIRROR-CONVEX (RH)  
9. 373-1753 [1] MIRROR-REAR VIEW  
10. 353-3587 [1] MIRROR-CONVEX (LH)  
11. 8M-2770 [6] CLIP (LOOP)  
12. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4191 M [6] BOLT (M10X1.5X16-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59110679
 

168-8926: MOTOR GP-WINDOW WIPER

168-8926 MOTOR GP-WINDOW WIPER -REAR
S/N L4F1-UP
24-VOLT
PART OF 364-2813 WIPER & WASHER GP-WINDOW
Type 1
i02290642 SEBP5911
1688926 MOTOR GP-WINDOW WIPER Parts scheme
  For full view, you need register

Parts for your 740B EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8737 [1] PLUG-SEAL  
3. 8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 5C-7261 M [1] NUT (M8X1.25-THD)  
5. 3F-9556 [1] LOCKWASHER  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 740B :

INSTALLATION GP-RADIO
465-2652 INSTALLATION GP-RADIO
328-4122 INSTALLATION GP-RADIO
GUARD GP-WINDOW
291-8960 GUARD GP-WINDOW
GUARD GP-WINDOW
291-8960 GUARD GP-WINDOW
DOOR GP-CAB
324-7011 DOOR GP-CAB
CYLINDER GP-CAB TILT
341-7067 CYLINDER GP-CAB TILT
CONTROL GP-XMSN & HOIST
347-9506 CONTROL GP-XMSN & HOIST
CONTROL GP-XMSN & EJECTOR
322-8566 CONTROL GP-XMSN & EJECTOR
LINER GP-CAB
324-7023 LINER GP-CAB
LINES GP-AIR CONDITIONER
324-7022 LINES GP-AIR CONDITIONER
LINES GP-AIR CONDITIONER
324-7022 LINES GP-AIR CONDITIONER
LINES GP-AIR CONDITIONER
332-3065 LINES GP-AIR CONDITIONER
LINES GP-HEATER
291-8930 LINES GP-HEATER
LINES GP-HEATER
291-8930 LINES GP-HEATER
MIRROR GP-REAR VIEW
326-8727 MIRROR GP-REAR VIEW
MIRROR GP-REAR VIEW
354-8656 MIRROR GP-REAR VIEW

Truck sale:

Caterpillar 740B
 
Caterpillar 740B
- Off Highway Trucks
CAVPOWER
Caterpillar 740B, water trucks, Transport
211,059 
Caterpillar 740B, water trucks, Transport
- water trucks
EMPIRE MACHINERY
Caterpillar 740B, Off Highway Trucks, Construction
203,923 
Caterpillar 740B, Off Highway Trucks, Construction
- Off Highway Trucks
FINNING CANADA
Caterpillar 740B, Off Highway Trucks, Construction
203,923 
Caterpillar 740B, Off Highway Trucks, Construction
- Off Highway Trucks
FINNING CANADA
Caterpillar 740B, water trucks, Transport
164,138 
Caterpillar 740B, water trucks, Transport
- water trucks
CAVPOWER
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.