OPERATOR STATION
WIPER GP-WINDOWWORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)BLADE GP
IMPLEMENTS
BRACE GPWORK TOOLS
SCARIFIER GPOPERATOR STATION
WIPER GP-WINDOW
#SEBP59270960
357-9653: WIPER GP-WINDOW
357-9653 WIPER GP-WINDOW -DOOR, LH
S/N R9A1-UP
PART OF 357-9200 DOOR GP-CAB
AN ATTACHMENT
S/N R9A1-UP
PART OF 357-9200 DOOR GP-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2U-4504 | [1] | TEE | |
| 2. | 3S-2093 | [3] | STRAP-CABLE | |
| 3. | 5C-8811 | [1] | BLADE AS-WIPER (500-MM)(UPPER) | |
| 4. | 6V-5851 | [1] | BLADE AS-WIPER (400-MM)(LOWER) | |
| 5. | 7Y-3474 | [1] | VALVE AS-CHECK (WINDOW WASHER) | |
| 6. | 8T-5400 | [2] | CONNECTOR | |
| 7. | 295-1118 | [1] | ARM GP-WINDOW WIPER (UPPER) | |
| 8T-1118 | [1] | NOZZLE AS-WASHER | ||
| 240-8666 | [3] | CLIP | ||
| 194-5171 E | HOSE (58-CM) | |||
| 8. | 295-1119 | [1] | ARM GP-WINDOW WIPER (LOWER) | |
| 8T-1118 | [1] | NOZZLE AS-WASHER | ||
| 240-8666 | [3] | CLIP | ||
| 194-5171 E | HOSE (60-CM) | |||
| 9. | 357-9655 | [1] | LINKAGE GP-WIPER (LH) | |
| 3F-9556 | [2] | LOCKWASHER | ||
| 5C-7261 M | [2] | NUT (M8X1.25-THD) | ||
| 206-5823 | [2] | CAP (WIPER MOTOR) | ||
| 10. | 389-2250 | [1] | MOTOR GP-WINDOW WIPER (24-VOLT, 2-SPEED) | |
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 11. | 3F-9556 | [1] | LOCKWASHER | |
| 12. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 13. | 1H-3244 | [3] | LOCKWASHER | |
| 14. | 8T-4970 M | [3] | BOLT (M6X1X14-MM) | |
| 15. | 144-0195 E | HOSE (11-CM EACH) | ||
| 15A. | 144-0195 E | HOSE (18-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59270961
381-8142: WIPER GP-WINDOW
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 B | [4] | STRAP-CABLE | |
| 2. | 6V-5851 | [2] | BLADE AS-WIPER (400-MM)(DOOR, RH, LH) | |
| 3. | 444-9544 | [2] | VALVE AS-CHECK | |
| 4. | 8T-5400 | [2] | CONNECTOR | |
| 5. | 416-0021 | [2] | PUMP AS-WASHER (24-VOLT) | |
| 6. | 235-6175 | [1] | HARNESS AS-WINDOW WIPER | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 7. | 260-2579 | [1] | ARM AS-WIPER (LH) | |
| 194-5171 E | HOSE (33-CM) | |||
| 305-9194 | [1] | NOZZLE AS-WASHER | ||
| 8. | 270-4884 | [1] | ARM AS-WIPER (RH) | |
| 194-5171 E | HOSE (33-CM) | |||
| 305-9195 | [1] | NOZZLE AS-WASHER | ||
| 9. | 295-4243 | [2] | WASHER-RUBBER | |
| 10. | 451-0116 | [1] | MOTOR GP-WINDOW WIPER (RH) | |
| (EACH MOTOR GP-WINDOW WIPER INCLUDES) | ||||
| 3F-9556 | [1] | LOCKWASHER | ||
| 5C-7261 M | [1] | NUT (M8X1.25-THD) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 11. | 451-0115 | [1] | MOTOR GP-WINDOW WIPER (LH) | |
| 12. | 144-0195 E | HOSE (10-CM EACH) | ||
| 12A. | 144-0195 E | HOSE (403-CM) | ||
| 12B. | 144-0195 E | HOSE (139-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59270962
233-7148: BIT GP-END
233-7148 BIT GP-END
S/N R9A1-UP
PART OF 349-3046, 349-3047 OPTION AR-WORK TOOL
FOR USE WITH @@@@@243-6702@@@@@, @@@@@243-6703@@@@@
CANNOT BE USED WITH @@@@@233-7160@@@@@
AN ATTACHMENT
S/N R9A1-UP
PART OF 349-3046, 349-3047 OPTION AR-WORK TOOL
FOR USE WITH @@@@@243-6702@@@@@, @@@@@243-6703@@@@@
CANNOT BE USED WITH @@@@@233-7160@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS#SEBP59270963
233-7160: BIT GP-END
233-7160 BIT GP-END
S/N R9A1-UP
OVERLAY
PART OF 349-3048 OPTION AR-WORK TOOL
FOR USE WITH @@@@@243-6702@@@@@, @@@@@243-6703@@@@@
CANNOT BE USED WITH @@@@@233-7148@@@@@
AN ATTACHMENT
S/N R9A1-UP
OVERLAY
PART OF 349-3048 OPTION AR-WORK TOOL
FOR USE WITH @@@@@243-6702@@@@@, @@@@@243-6703@@@@@
CANNOT BE USED WITH @@@@@233-7148@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS#SEBP59270964
243-6702: BLADE GP
243-6702 BLADE GP
S/N R9A1-UP
12-FT
PART OF 349-3046 OPTION AR-WORK TOOL
FOR USE WITH @@@@@250-0615@@@@@
CANNOT BE USED WITH ANY OTHER BLADE GP
AN ATTACHMENT
S/N R9A1-UP
12-FT
PART OF 349-3046 OPTION AR-WORK TOOL
FOR USE WITH @@@@@250-0615@@@@@
CANNOT BE USED WITH ANY OTHER BLADE GP
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 260-7792 | [1] | MOLDBOARD AS | |
| [1] | REINFORCEMENT | |||
| [1] | RAIL-MOLDBOARD | |||
| [1] | RAIL-MOLDBOARD | |||
| [2] | PLATE | |||
#SEBP59270965
243-6703: BLADE GP
243-6703 BLADE GP
S/N R9A1-UP
14-FT X 24-IN
PART OF 349-3047 OPTION AR-WORK TOOL
FOR USE WITH @@@@@250-0615@@@@@
CANNOT BE USED WITH ANY OTHER BLADE GP
AN ATTACHMENT
S/N R9A1-UP
14-FT X 24-IN
PART OF 349-3047 OPTION AR-WORK TOOL
FOR USE WITH @@@@@250-0615@@@@@
CANNOT BE USED WITH ANY OTHER BLADE GP
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 260-7793 | [1] | MOLDBOARD AS | |
| [1] | REINFORCEMENT | |||
| [2] | PLATE | |||
| [1] | RAIL-MOLDBOARD | |||
| [1] | RAIL-MOLDBOARD | |||
#SEBP59270966
243-6704: BLADE GP
243-6704 BLADE GP
S/N R9A1-UP
14-FT X 27-IN
PART OF 349-3048 OPTION AR-WORK TOOL
CANNOT BE USED WITH ANY OTHER BLADE GP
AN ATTACHMENT
S/N R9A1-UP
14-FT X 27-IN
PART OF 349-3048 OPTION AR-WORK TOOL
CANNOT BE USED WITH ANY OTHER BLADE GP
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 260-7794 | [1] | MOLDBOARD AS | |
| [1] | REINFORCEMENT | |||
| [2] | PLATE | |||
| [1] | RAIL-MOLDBOARD | |||
| [1] | RAIL-MOLDBOARD | |||
#SEBP59270967
309-6809: BLADE GP-BULLDOZER
309-6809 BLADE GP-BULLDOZER -FRONT
S/N R9A1-UP
PART OF 351-5178 OPTION AR-WORK TOOL
FOR USE WITH @@@@@231-1593@@@@@
CANNOT BE USED WITH @@@@@250-3071@@@@@, @@@@@312-2204@@@@@
AN ATTACHMENT
S/N R9A1-UP
PART OF 351-5178 OPTION AR-WORK TOOL
FOR USE WITH @@@@@231-1593@@@@@
CANNOT BE USED WITH @@@@@250-3071@@@@@, @@@@@312-2204@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-2306 | [2] | LINK | |
| 2. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 3B-8491 | [8] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 4T-3010 | [2] | EDGE-CUTTING (END) | |
| 5. | 7P-1577 | [8] | PIN AS | |
| 6. | 136-1711 | [2] | PIN AS | |
| 7. | 169-4088 | [1] | LINK AS | |
| 8. | 169-4089 | [1] | EDGE-CUTTING (CENTER) | |
| 9. | 169-4092 | [1] | MOLDBOARD AS | |
| 10. | 247-4412 | [1] | PLATE AS | |
| 12. | 309-7496 | [1] | SUPPORT AS | |
| 13. | 314-9338 Y | [1] | CYLINDER GP-HYDRAULIC (BULLDOZER) | |
| 14. | 283-1578 | [28] | WASHER-HARD (22X45X10-MM THK) | |
| 15. | 286-0466 | [14] | BOLT (M20X2.5X100-MM) | |
| 16. | 286-0742 M | [14] | NUT (M20X2.5-THD) | |
| 17. | 2J-3506 | [17] | NUT-FULL (3/4-10-THD) | |
| 18. | 4F-7827 | [17] | BOLT-PLOW (3/4-10X2.25-IN) | |
| 19. | 5M-6214 | [4] | PLUG (1/8-27 PTF) | |
| 20. | 5V-6454 B | [18] | WASHER (52X120X1.6-MM THK) | |
| 21. | 5V-6455 B | [20] | WASHER (52X120X3-MM THK) | |
| 22. | 7G-8839 | [10] | SPACER (13.5X57X6-MM THK) | |
| 23. | 7X-2553 M | [8] | BOLT (M16X2X40-MM) | |
| 24. | 8T-4139 M | [10] | BOLT (M12X1.75X30-MM) | |
| 25. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59270968
293-5559: BRACE GP
293-5559 BRACE GP -WORK TOOL LIFT
S/N R9A1-UP
PART OF 293-5556 LIFT GP-WORK TOOL
AN ATTACHMENT
S/N R9A1-UP
PART OF 293-5556 LIFT GP-WORK TOOL
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 269-8775 | [2] | BRACE AS | |
| (EACH INCLUDES) | ||||
| 8T-6462 M | [1] | BOSS-WELD (M10X1.5X25-MM) | ||
| 2. | 112-3927 M | [6] | BOLT (M20X2.5X90-MM) | |
| 3. | 8T-1739 | [28] | WASHER-HARD (21X40X3.5-MM THK) | |
| 4. | 7X-2565 M | [8] | BOLT (M20X2.5X100-MM) | |
| 5. | 8T-4131 M | [14] | NUT (M20X2.5-THD) | |
| 6. | 6V-7676 M | [4] | NUT (M24X3-THD) | |
| 7. | 7X-2577 M | [4] | BOLT (M24X3X90-MM) | |
| 8. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| M | METRIC PART | |||
#SEBP59270969
252-0931: BRACKET GP-SCARIFIER
252-0931 BRACKET GP-SCARIFIER
S/N R9A1-UP
PART OF 350-8821 OPTION AR-SCARIFIER
FOR USE WITH @@@@@311-1508@@@@@
AN ATTACHMENT
S/N R9A1-UP
PART OF 350-8821 OPTION AR-SCARIFIER
FOR USE WITH @@@@@311-1508@@@@@
AN ATTACHMENT
For full view, you need register
