OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
COOLER GPCYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC#SEBP61230780
425-3413: CONTROL AR-HYDRAULIC
425-3413 CONTROL AR-HYDRAULIC -RIPPER, WING MAST, WING TILT
S/N R9H1-UP
AN ATTACHMENT
S/N R9H1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 344-2764 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (RIPPER) | ||
| 360-7615 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (AUXILIARY) | ||
| 250-9259 Y | [1] | ELECTRONICS GP-IMPLEMENT (IMPLEMENT 2) | ||
| 283-7770 Y | [1] | LINES GP-RIPPER | ||
| 261-3272 Y | [1] | VALVE GP-BANK 5 (FRONT) | ||
| -OR- | ||||
| 382-4415 Y | [1] | VALVE GP-BANK 5 (FRONT) | ||
| 261-3283 Y | [1] | VALVE GP-BANK 6 (REAR) | ||
| -OR- | ||||
| 382-4426 Y | [1] | VALVE GP-BANK 6 (REAR FRAME) | ||
| 329-6117 Y | [1] | WIRING GP-ELECTRONIC CONTROL (HYDRAULIC IMPLEMENT) | ||
| 250-0899 Y | [1] | WIRING GP-FRONT | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230781
425-3414: CONTROL AR-HYDRAULIC
425-3414 CONTROL AR-HYDRAULIC -DOZER ANGLE, FRONT LIFT, RIPPER, WING MAST, WING TILT
S/N R9H1-UP
AN ATTACHMENT
S/N R9H1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 344-2764 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (RIPPER) | ||
| 360-7615 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (AUXILIARY) | ||
| 250-9259 Y | [1] | ELECTRONICS GP-IMPLEMENT (IMPLEMENT 2) | ||
| 283-7770 Y | [1] | LINES GP-RIPPER | ||
| 261-3283 Y | [1] | VALVE GP-BANK 6 (REAR) | ||
| -OR- | ||||
| 382-4426 Y | [1] | VALVE GP-BANK 6 (REAR FRAME) | ||
| 261-3274 Y | [1] | VALVE GP-BANK 7 (FRONT) | ||
| -OR- | ||||
| 382-4417 Y | [1] | VALVE GP-BANK 7 (FRONT) | ||
| 329-6117 Y | [1] | WIRING GP-ELECTRONIC CONTROL (HYDRAULIC IMPLEMENT) | ||
| 250-0899 Y | [1] | WIRING GP-FRONT | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230782
425-3415: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 344-2764 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (RIPPER) | ||
| 283-7770 Y | [1] | LINES GP-RIPPER | ||
| 261-3281 Y | [1] | VALVE GP-BANK 4 (REAR) | ||
| S/N R9H1-928 | ||||
| 382-4425 Y | [1] | VALVE GP-BANK 4 (REAR) | ||
| S/N R9H929-UP | ||||
| 261-3272 Y | [1] | VALVE GP-BANK 5 (FRONT) | ||
| S/N R9H1-928 | ||||
| 382-4415 Y | [1] | VALVE GP-BANK 5 (FRONT) | ||
| S/N R9H929-UP | ||||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230783
463-2294: CONTROL AR-HYDRAULIC
463-2294 CONTROL AR-HYDRAULIC
S/N R9H1-UP
CHINA
CANNOT BE USED WITH @@@@@366-3374@@@@@, @@@@@366-3375@@@@@, @@@@@354-8463@@@@@, @@@@@271-3652@@@@@
AN ATTACHMENT
S/N R9H1-UP
CHINA
CANNOT BE USED WITH @@@@@366-3374@@@@@, @@@@@366-3375@@@@@, @@@@@354-8463@@@@@, @@@@@271-3652@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS#SEBP61230784
249-7365: COOLER GP-HYDRAULIC OIL
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 192-7231 I | [1] | HOSE AS | |
| 2. | 365-6876 | [1] | CORE AS-OIL COOLER (HYDRAULIC) | |
| 3. | 241-6208 | [1] | ELBOW AS | |
| 119-6220 | [1] | ELBOW | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 4. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR | ||
| 5. | 266-1595 | [1] | VALVE GP-CHECK (HYDRAULIC OIL COOLER BYPASS) | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 6. | 275-0645 | [1] | TUBE AS | |
| 7. | 278-7448 | [1] | BRACKET AS | |
| 8. | 278-7452 | [1] | BRACKET AS | |
| 9. | 291-1348 | [1] | BLOCK | |
| 10. | 139-1802 | [1] | TEE-SWIVEL-ORFS | |
| 11. | 148-8327 | [1] | CONNECTOR AS | |
| 6V-8637 | [1] | CONNECTOR | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 12. | 148-8335 | [1] | CONNECTOR AS | |
| 6V-8635 | [1] | CONNECTOR | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 13. | 148-8388 | [1] | ELBOW AS | |
| 6V-8629 | [1] | ELBOW (FACE SEAL) | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 14. | 3K-0360 | [1] | SEAL-O-RING | |
| 15. | 6V-9746 | [1] | SEAL-O-RING | |
| 16. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 18. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 20. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 21. | 5K-9090 | [1] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP61230785
283-7764: CYLINDER & MTG GP-ARTICULATION
283-7764 CYLINDER & MTG GP-ARTICULATION
S/N R9H1-UP
PART OF 349-2556 COMMON AR
Type 1
S/N R9H1-UP
PART OF 349-2556 COMMON AR
Type 1
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-3658 | [2] | TUBE | |
| 2. | 1K-7081 BC | [16] | WASHER (2-17/64X3-1/2X0.032-IN THK) | |
| 3. | 277-8758 | [2] | PIN AS | |
| 4. | 290-8074 Y | [2] | CYLINDER GP-ARTICULATION | |
| 5. | 316-6136 | [1] | PIN AS | |
| 6. | 170-3093 | [2] | BUSHING | |
| 7. | 3B-5317 | [2] | PIN-COTTER | |
| 8. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 9. | 7X-2553 M | [2] | BOLT (M16X2X40-MM) | |
| 10. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 11. | 7X-0515 | [2] | WASHER-HARD (17X35X5-MM THK) | |
| 12. | 316-6137 | [1] | PIN AS | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230786
283-7764: CYLINDER & MTG GP-ARTICULATION
283-7764 CYLINDER & MTG GP-ARTICULATION
S/N R9H1-UP
PART OF 349-2556 COMMON AR
Type 2
S/N R9H1-UP
PART OF 349-2556 COMMON AR
Type 2
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-3658 | [2] | TUBE | |
| 2. | 1K-7081 B | [16] | WASHER (2-17/64X3-1/2X0.032-IN THK) | |
| 3. | 277-8758 | [2] | PIN AS | |
| 4. | 378-6610 CY | [2] | CYLINDER GP-ARTICULATION | |
| 5. | 316-6136 | [1] | PIN AS | |
| 6. | 170-3093 | [2] | BUSHING | |
| 7. | 3B-5317 | [2] | PIN-COTTER | |
| 8. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 9. | 7X-2553 M | [2] | BOLT (M16X2X40-MM) | |
| 10. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 11. | 7X-0515 | [2] | WASHER-HARD (17X35X5-MM THK) | |
| 12. | 316-6137 | [1] | PIN AS | |
| 13. | 7K-9204 C | [4] | SEAL-LIP TYPE | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230787
261-2372: CYLINDER & MTG GP-BLADE LIFT
261-2372 CYLINDER & MTG GP-BLADE LIFT
S/N R9H1-222
PART OF 349-2556 COMMON AR
S/N R9H1-222
PART OF 349-2556 COMMON AR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-9101 | [2] | CAP | |
| 2. | 310-5479 | [8] | SHIM (0.5-MM THK) | |
| 3. | 3B-8485 | [2] | ELBOW | |
| 4. | 310-5480 | [4] | INSERT | |
| 5. | 270-7538 Y | [2] | CYLINDER GP-LIFT (BLADE) | |
| 6. | 273-4130 | [4] | CAP AS | |
| (EACH INCLUDES) | ||||
| 6A. | 8D-8888 | [1] | BEARING | |
| 6B. | 9D-6586 | [1] | SEAL-LIP TYPE | |
| 7. | 112-3929 M | [4] | BOLT (M24X3X100-MM) | |
| 8. | 225-0098 M | [8] | BOLT (M20X2.5X140-MM) | |
| 9. | 267-3506 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 10. | 267-3508 | [16] | WASHER-HARD (22X35X3.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230788
261-2372: CYLINDER & MTG GP-BLADE LIFT
261-2372 CYLINDER & MTG GP-BLADE LIFT
S/N R9H223-UP
PART OF 349-2556 COMMON AR
S/N R9H223-UP
PART OF 349-2556 COMMON AR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-9101 | [2] | CAP | |
| 2. | 310-5479 | [8] | SHIM (0.5-MM THK) | |
| 3. | 3B-8485 | [2] | ELBOW | |
| 4. | 310-5480 | [4] | INSERT | |
| 5. | 365-7416 CY | [2] | CYLINDER GP-LIFT (BLADE) | |
| 6. | 273-4130 | [4] | CAP AS | |
| (EACH INCLUDES) | ||||
| 6A. | 8D-8888 | [1] | BEARING | |
| 6B. | 9D-6586 | [1] | SEAL-LIP TYPE | |
| 7. | 112-3929 M | [4] | BOLT (M24X3X100-MM) | |
| 8. | 225-0098 M | [8] | BOLT (M20X2.5X140-MM) | |
| 9. | 267-3506 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 10. | 267-3508 | [16] | WASHER-HARD (22X35X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230789
260-3646: CYLINDER & MTG GP-BLADE TIP
260-3646 CYLINDER & MTG GP-BLADE TIP
S/N R9H1-UP
PART OF 349-2556 COMMON AR, 440-4262 IMPLEMENT AR
Type 1
ALSO AN ATTACHMENT
S/N R9H1-UP
PART OF 349-2556 COMMON AR, 440-4262 IMPLEMENT AR
Type 1
ALSO AN ATTACHMENT
For full view, you need register
