BRAKING SYSTEM
CONTROL GPOPERATOR STATION
PLATE GPPLATFORM GP
BRAKING SYSTEM
CONTROL GP
#SEBP61231080
346-6901: PEDAL GP-BRAKE, XMSN & GOV
346-6901 PEDAL GP-BRAKE, XMSN & GOV
S/N R9H1-UP
PART OF 265-8942 CONTROL GP-SERVICE BRAKE
ALSO AN ATTACHMENT
S/N R9H1-UP
PART OF 265-8942 CONTROL GP-SERVICE BRAKE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS#SEBP61231081
325-2576: PLATE-FOOTREST
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP61231082
336-8457: PLATFORM AR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS#SEBP61231083
355-5920: PLATFORM AR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 385-5956 Y | [1] | CAB GP | ||
| 367-3267 Y | [1] | COVER GP-CAB | ||
| Y | [1] | LADDER GP | ||
| 333-4814 Y | [1] | LIGHTING GP-FLOOD | ||
| 381-8000 Y | [1] | MIRROR GP-REAR VIEW | ||
| 233-3122 Y | [1] | MOUNTING GP-ANTENNA (RADIO) | ||
| Y | [1] | PLATFORM AR | ||
| 338-9728 Y | [1] | PLATFORM GP | ||
| 233-3150 Y | [1] | SEAT & MOUNTING GP (AIR) | ||
| 238-8825 Y | [1] | SUPPORT GP-LIGHT (CAB ROOF) | ||
| 336-8051 Y | [1] | WALKWAY GP | ||
| 300-1873 Y | [1] | WINDOW GP-CAB (REAR, LH, RH, SIDE WIPERS) | ||
| 233-3139 Y | [1] | WIPER GP-WINDOW (REAR) | ||
| 391-0870 | [1] | FILM-IDENTIFICATION (SHIPPING NOTICE, READ OMM) | ||
| 248-5245 | [1] | FILM-INFORMATION (LIFT EYE, TIE-DOWN LOCATION) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61231084
386-7309: PLATFORM AR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 233-3107 Y | [1] | CAB AR | ||
| 385-1258 Y | [1] | COVER GP-CAB | ||
| 294-1024 Y | [1] | DOOR GP-CAB (RH) | ||
| 233-3122 Y | [1] | MOUNTING GP-ANTENNA (RADIO) | ||
| 385-1250 Y | [1] | PLATFORM GP-OPERATOR | ||
| 233-3150 Y | [1] | SEAT & MOUNTING GP (AIR) | ||
| 238-8825 Y | [1] | SUPPORT GP-LIGHT (CAB ROOF) | ||
| 329-8820 Y | [1] | WALKWAY GP (TANDEM) | ||
| 300-1873 Y | [1] | WINDOW GP-CAB (REAR, LH, RH, SIDE WIPERS) | ||
| 233-3139 Y | [1] | WIPER GP-WINDOW (REAR) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61231085
425-5708: PLATFORM AR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | CAB AR | ||
| 367-3267 Y | [1] | COVER GP-CAB | ||
| Y | [1] | LADDER GP | ||
| 333-4814 Y | [1] | LIGHTING GP-FLOOD | ||
| -OR- | ||||
| 383-2255 Y | [1] | WIRING GP-LIGHTING | ||
| 381-8000 Y | [1] | MIRROR GP-REAR VIEW | ||
| 383-6140 Y | [1] | MOUNTING GP-PLATFORM | ||
| 337-7517 Y | [1] | MOUNTING GP-SNOW WING | ||
| Y | [1] | PLATFORM AR | ||
| 338-9728 Y | [1] | PLATFORM GP | ||
| 336-8051 Y | [1] | WALKWAY GP | ||
| 391-0870 | [1] | FILM-IDENTIFICATION (SHIPPING NOTICE, READ OMM) | ||
| 248-5245 | [1] | FILM-INFORMATION (LIFT EYE, TIE-DOWN LOCATION) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61231086
338-9728: PLATFORM GP
338-9728 PLATFORM GP -REAR
S/N R9H1-UP
PART OF 355-5920, 425-5708 PLATFORM AR
AN ATTACHMENT
S/N R9H1-UP
PART OF 355-5920, 425-5708 PLATFORM AR
AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 271-5390 | [1] | HANDRAIL | |
| 2. | 329-8845 | [1] | PLATE AS | |
| 3. | 329-8847 | [1] | PLATE AS | |
| 4. | 329-8849 | [1] | PLATE | |
| 5. | 329-8850 | [1] | PLATE | |
| 6. | Y | [1] | HANDRAIL GP | |
| 7. | 388-9328 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 399-0701 | [2] | SUPPORT | |
| 9. | 417-6867 | [2] | PLATE AS | |
| 10. | 417-6870 | [2] | PLATE AS | |
| 11. | 417-6873 | [2] | PLATE AS | |
| 12. | 417-6875 | [2] | PLATE AS | |
| 13. | 417-6910 | [2] | PLATE AS | |
| 14. | 417-6917 | [2] | CHANNEL AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [10] | NUT-WELD (M10X1.5-THD) | ||
| 355-8941 M | [8] | NUT-WELD (M16X2-THD) | ||
| 15. | 418-1350 | [1] | PLATE AS | |
| 9R-2613 M | [1] | BOSS-WELD (M10X1.5X25-MM) | ||
| 16. | 418-1351 | [1] | PLATE AS | |
| 8T-3597 M | [1] | NUT-WELD (M12X1.75-THD) | ||
| 17. | 420-8665 | [2] | SUPPORT GP-PLATFORM | |
| (EACH INCLUDES) | ||||
| 095-1299 | [2] | DOWEL | ||
| 18. | 421-7354 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 19. | 422-1299 B | [56] | SHIM | |
| 20. | 422-1300 B | [48] | SHIM | |
| 21. | 423-0289 Y | [1] | FENDER GP (LH) | |
| 22. | 423-0290 Y | [1] | FENDER GP (LH) | |
| 23. | 176-5311 M | [8] | LOCKNUT (M16X2-THD) | |
| 24. | 198-4780 | [28] | WASHER-HARD (17.5X32X8-MM THK) | |
| 25. | 198-4781 | [48] | WASHER-HARD (22X40X10-MM THK) | |
| 26. | 7X-0590 | [3] | WASHER-HARD (13.5X44.5X6-MM THK) | |
| 27. | 7X-2556 M | [8] | BOLT (M16X2X100-MM) | |
| 28. | 7X-2563 M | [16] | BOLT (M20X2.5X60-MM) | |
| 29. | 7X-7729 | [42] | WASHER (11X25X3-MM THK) | |
| 30. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 31. | 8T-4136 M | [34] | BOLT (M10X1.5X25-MM) | |
| 32. | 8T-4139 M | [10] | BOLT (M12X1.75X30-MM) | |
| 33. | 8T-4175 M | [4] | BOLT (M16X2X90-MM) | |
| 34. | 8T-4193 M | [16] | BOLT (M16X2X50-MM) | |
| 35. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 36. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 37. | 8T-5460 M | [16] | BOLT (M20X2.5X40-MM) | |
| 38. | 8T-6430 M | [16] | BOLT (M20X2.5X50-MM) | |
| 39. | 8T-6868 M | [2] | BOLT (M12X1.75X80-MM) | |
| 40. | 8T-8549 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 41. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61231087
260-3769: PLATFORM GP-OPERATOR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-9524 | [2] | LATCH | |
| 2. | 8W-1784 | [2] | STOP | |
| 3. | 269-4799 | [1] | SUPPORT AS | |
| 4. | [2] | ANGLE | ||
| 5. | 269-4922 | [1] | SUPPORT AS | |
| 6. | 274-9254 Y | [1] | MOUNTING GP-PLATFORM | |
| 7. | 276-7286 | [1] | HANDRAIL | |
| 8. | 276-7338 | [1] | HANDRAIL | |
| 9. | 291-9773 | [1] | SUPPORT AS (LH) | |
| 10. | 291-9774 | [1] | SUPPORT AS (RH) | |
| 11. | 291-9777 | [1] | PLATFORM AS-OPERATOR | |
| 12. | 291-9778 | [1] | PLATFORM AS-OPERATOR | |
| 9F-6445 | [1] | NUT-WELD (1/4-20-THD) | ||
| 9X-2032 M | [2] | NUT-WELD (M4X0.7-THD) | ||
| 13. | 291-9779 | [1] | PLATFORM AS-OPERATOR | |
| 14. | 291-9780 | [1] | PLATFORM AS-OPERATOR | |
| 15. | 291-9790 Y | [2] | STEP GP (RH, LH) | |
| 16. | 294-5140 | [1] | PLATE | |
| 17. | 294-5141 | [1] | ANGLE | |
| 18. | 301-6785 | [1] | TUBE | |
| 19. | 301-6786 | [1] | TUBE | |
| 20. | 170-5632 M | [8] | BOLT (M4X0.7X16-MM) | |
| 21. | 3B-4617 | [4] | PIN-COTTER | |
| 22. | 7X-0599 | [4] | WASHER-HARD (13X20X2-MM THK) | |
| 23. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
| 24. | 8T-0328 | [8] | WASHER-HARD (5.5X10X1-MM THK) | |
| 25. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 26. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 27. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61231088
336-7471: PLATFORM GP-OPERATOR
336-7471 PLATFORM GP-OPERATOR -LH
S/N R9H1-UP
PART OF 336-8457 PLATFORM AR
AN ATTACHMENT
S/N R9H1-UP
PART OF 336-8457 PLATFORM AR
AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-2393 | [1] | BUMPER-CONICAL | |
| 2. | 113-9305 | [1] | HINGE | |
| 3. | 115-3580 | [2] | PLATE | |
| 4. | 189-8789 | [1] | BUMPER AS | |
| 5. | 275-0572 J | [1] | LATCH AS | |
| 6. | 443-2043 Y | [1] | HANDRAIL GP | |
| 8. | 443-2041 Y | [1] | WALKWAY GP | |
| 10. | 336-7473 | [1] | SUPPORT AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [8] | NUT-WELD (M12X1.75-THD) | ||
| 11. | 336-7475 | [1] | PLATE AS | |
| 348-3428 | [2] | SPACER (14X20X42-MM THK) | ||
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 12. | 336-7476 | [1] | PLATE AS | |
| 348-3428 | [2] | SPACER (14X20X42-MM THK) | ||
| 8T-3597 M | [1] | NUT-WELD (M12X1.75-THD) | ||
| 13. | 336-7477 | [1] | SUPPORT AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 14. | 336-7480 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [4] | NUT-WELD (M12X1.75-THD) | ||
| 15. | 336-8436 | [1] | BLOCK | |
| 17. | 343-4088 | [1] | BRACKET | |
| 18. | 344-3785 | [1] | CAM-LATCH | |
| 19. | 368-0752 | [1] | BRACKET AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 20. | 368-0753 | [1] | BRACKET AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 21. | 368-1438 | [1] | PLATE | |
| 22. | 198-4778 | [31] | WASHER-HARD (13.5X30X12-MM THK) | |
| 23. | 267-8821 | [8] | WASHER (17X36X12-MM THK) | |
| 24. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 25. | 5P-7468 | [4] | CLIP (SLOT) | |
| 26. | 5P-7469 | [4] | CLIP (TAB) | |
| 27. | 6V-1874 | [4] | GROMMET (31-MM ID) | |
| 28. | 7X-7729 | [5] | WASHER (11X25X3-MM THK) | |
| 29. | 8T-4139 M | [18] | BOLT (M12X1.75X30-MM) | |
| 30. | 8T-4183 M | [23] | BOLT (M12X1.75X40-MM) | |
| 31. | 8T-4184 M | [14] | BOLT (M12X1.75X45-MM) | |
| 32. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 33. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 34. | 8T-4223 | [32] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 35. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 36. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| 37. | 8T-6868 M | [4] | BOLT (M12X1.75X80-MM) | |
| 38. | 8T-7338 M | [8] | BOLT (M16X2X45-MM) | |
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61231089
336-7472: PLATFORM GP-OPERATOR
336-7472 PLATFORM GP-OPERATOR -RH
S/N R9H1-993
PART OF 336-8457 PLATFORM AR
AN ATTACHMENT
S/N R9H1-993
PART OF 336-8457 PLATFORM AR
AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-2393 | [1] | BUMPER-CONICAL | |
| 2. | 115-3580 | [2] | PLATE | |
| 3. | 189-8789 | [1] | BUMPER AS | |
| 4. | 371-4423 | [2] | LATCH AS | |
| (EACH INCLUDES) | ||||
| 290-5827 | [1] | BRACKET | ||
| 3B-4615 | [1] | PIN-COTTER | ||
| 6F-8499 | [1] | SPRING | ||
| 7X-0605 | [1] | WASHER-HARD (13X28X1.6-MM THK) | ||
| 6. | 336-7433 | [1] | LADDER AS | |
| 6F-8480 | [2] | PLUG | ||
| 9. | 443-2042 Y | [1] | WALKWAY GP | |
| 10. | 336-7474 | [1] | SUPPORT AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [8] | NUT-WELD (M12X1.75-THD) | ||
| 11. | 336-7475 | [1] | PLATE AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 348-3428 | [2] | SPACER (14X20X42-MM THK) | ||
| 12. | 336-7476 | [1] | PLATE AS | |
| 8T-3597 M | [1] | NUT-WELD (M12X1.75-THD) | ||
| 348-3428 | [2] | SPACER (14X20X42-MM THK) | ||
| 13. | 336-8436 | [1] | BLOCK | |
| 14. | 343-4088 | [1] | BRACKET | |
| 15. | 443-2044 Y | [1] | HANDRAIL GP | |
| 16. | 368-1321 | [1] | BRACKET AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 17. | 368-1322 | [1] | BRACKET AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 18. | 368-1323 | [1] | BRACKET AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 19. | 368-7618 | [1] | SUPPORT AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 20. | 421-2515 Y | [1] | SUPPORT GP-PLATFORM | |
| 21. | 129-3180 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 22. | 198-4778 | [29] | WASHER-HARD (13.5X30X12-MM THK) | |
| 23. | 248-0102 M | [4] | U-BOLT (M8X1.25-THD) | |
| 24. | 267-8821 | [12] | WASHER (17X36X12-MM THK) | |
| 25. | 345-8534 | [2] | BOLT-SPECIAL | |
| 26. | 5C-7261 M | [9] | NUT (M8X1.25-THD) | |
| 27. | 5P-7468 | [4] | CLIP (SLOT) | |
| 28. | 5P-7469 | [4] | CLIP (TAB) | |
| 29. | 6V-1874 | [4] | GROMMET (31-MM ID) | |
| 30. | 7E-0031 | [2] | WASHER (13.5X25.5X3-MM THK) | |
| 31. | 8D-5054 | [6] | WASHER-HARD (17X30X3-MM THK) | |
| 32. | 8T-4139 M | [22] | BOLT (M12X1.75X30-MM) | |
| 33. | 8T-4183 M | [21] | BOLT (M12X1.75X40-MM) | |
| 34. | 8T-4184 M | [12] | BOLT (M12X1.75X45-MM) | |
| 35. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 36. | 8T-4223 | [34] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 37. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 38. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| 39. | 8T-6868 M | [4] | BOLT (M12X1.75X80-MM) | |
| 40. | 8T-7338 M | [12] | BOLT (M16X2X45-MM) | |
| 41. | 3E-8349 E | SEAL (6-CM EACH) | ||
| 42. | 6V-9189 M | [8] | LOCKNUT (M8X1.25-THD) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
